advertisement
▼
Scroll to page 2
MANUAL FAUCETS 1100-HA8VPACP Kitchen Sink Faucet Product Type ___________________________________________________ Kitchen Sink Faucet Job Name ________________________________________________ Features & Specifications ___________________________________________________ • 8" C-C High Rise Swing Spout • Vandal Proof 2.2 GPM (8.3 L/min) Pressure Compensating Aerator • 2" Metal Single Wing Canopy Handles with Secured Color Coded Service Buttons. • Quaturn™ Operating Cartridges • 1/2" NPSM Supply Inlets with Coupling Nut for 3/8" or 1/2" Flexible Riser Item Number _____________________________________________ Section/Tag ______________________________________________ Model Specified ___________________________________________ Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________ [ ] Submitted as Shown Performance Specification ___________________________________________________ • Rating Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140°F [ ] Submitted with Variations Date _____________________________________________________ Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 5-Year Limited Cartridge Warranty • 1-Year Limited Finish Warranty Codes & Standards ___________________________________________________ • ASME A112.18.1M • CSA B125.1 • Certified to NSF/ANSI 61, Section 9 by CSA • ADA ANSI/ICC A117.1 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com 2/11 Product specifications subject to change without notice 1100-HA8VPACP Kitchen Sink Faucet Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 1100-HA8VPACP, polished chrome plated solid brass body and spout. 8" C-C high rise swing spout. 2.2 GPM pressure compensating, vandal resistant aerator outlet. 2" single wing handles with eight point tapered broach and secured color coded index buttons. Quaturn™ quarter-turn renewable compression cartridge designed to close with water pressure, with square tapered broach feature to help facilitate handle removal. 8" rigid valve body centers with 1/2" NPSM threaded inlets with coupling nuts for connection to 3/8" or 1/2" standard flexible risers. Mounting hardware included. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1M, CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA. Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com 2/11 Product specifications subject to change without notice
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project