Compressed air for exacting demands - Center

Compressed air for exacting demands - Center
Compressed air for exacting demands
Dürr Dental Compressors for CAD/CAM milling and grinding systems
Compressors from Dürr Dental have been hailed by dentists for over 60 years with their outstanding performance and high air quality – oil-free, dry and hygienic – and have carved out a leading market position.
Compressors from Dürr Dental reliably supply oil-free, dry and hygienic compressed air. Today's highly efficient membrane drying unit
is one of many examples of Dürr Dental's uncompromising spirit of innovation. This invention has become a technical standard that has
had no peer for years.
Optimally suited for continuous operation of milling and grinding machines
Milling and grinding machines have particularly high demands towards compressors to supply them
with reliable and constant compressed air. Milling machines don't stop during operation therefore a
constant supply of oil-free and dry compressed air is guaranteed. The duty cycle of compressor units
running a milling machine goes far beyond their duty cycle for normal dental operations. Dürr Dental's
fully developed technology meets all such demands and is designed for continuous operation.
High-quality system parts ensure high precision and quiet running. Compressors not only run quieter,
but also last longer.
The membrane-drying unit with patented technology compared to conventional
adsorber dryers
The constant, uninterrupted flow of compressed air required by milling and grinding machines makes
for very long compressor duty cycles and allows for only short shut-off cycles.
More moisture forms in the dryer than during normal dentistry operations after a compressor has been
Membrane-drying unit for non-stop
operation.
running for a longer time with an adsorber dryer. When the compressor is shut off, moisture in the
dryer is not fully removed due to regeneration which is usually under-calculated for this application.
The resulting insufficient regeneration of the
dryer leads to a gradual increase in the
moisture content of the compressed air.
Compressors with simple adsorption dryers
Humidity
are thus not suited to run such machines. The
innovative membrane-drying unit from
Dürr Dental means that there is no need for
regeneration times. A constant supply of dry,
compressed air in continuous operation is
guaranteed.
After compressors have been running for a longer time, moisture
in the adsorption dryer increases. Yet the membrane-drying unit
remains constantly dry and requires no regeneration interruption.
*According to ISO 8573_1:2010, Dürr Dental compressors fulfil compressed-air requirements for classes 1/4/1 with sterile
filter, and 2/4/1 with standard fine filter. The sterile filter does not produce sterile air.
An optional sterile filterSimple
withAdsorption
a gradedryer
of filtration of 0.01 μmMembrane-drying
is available unit by Dürr D
for even better air quality.*
The perfect compressors
Duo
▪ tank capacity: 20 litres
at 9 bar 70 l/min
▪ air output: at 5 bar 66 dB/A
▪ noise level: ▪ 230 V (1∼), 50/60 Hz, Order-No. 5252-01
Compressor pressure range (bar) to be adjusted
KaVo ARCTICA engine
6,5 to 8,0
KaVo Everest engine
6,5 to 8,0
AmannGirrbach ceramill® motion 2
®
Duo Tandem, 1 aggregate
▪ tank capacity: 50 litres
at 9 bar 70 l/min
▪ air output: at 5 bar 68 dB/A
▪ noise level: ▪ 400 V (3∼), 50/60 Hz*, Order-No. 5152-54
6,5 to 8,0
AmannGirrbach ceramill mikro
6,5 to 8,0
vhf camfacture N4
5,5 to 7,0
vhf camfacture K5
6,5 to 8,0
Planmeca PlanMill 40
5,5 to 7,0
Zubler DC1, DC5
7,0 to 8,5
Roland DWX-4, DWX-50, DWX-51D
5,5 to 7,0
imes-icore CORiTEC
140i, 240i, 250i, 340i, 350i, 440i, 450i
7,0 to 8,5
Compressor pressure range (bar) to be adjusted
Quattro
▪ tank capacity: 50 litres
at 9 bar 145 l/min
▪ air output: at 5 bar 70 dB/A
▪ noise level: ▪ 400 V (3∼), 50/60 Hz, Order-No. 5452-51
Duo Tandem, 2 aggregates
P0071000024L02/DD-dd.de/0.5/02/H10 Subject to change without notice
▪ tank capacity: 50 litres
at 9 bar 130 l/min
▪ air output: at 5 bar 69 dB/A
▪ noise level: ▪ 230 V (1∼), 50/60 Hz, Order-No. 4252100004
(without electronic control)
400 V (3∼), 50/60 Hz*, Order-No. 4252-54
Sirona inLab MC X5
7,0 to 8,5
Wieland ZENOTEC select
7,0 to 8,5
Wieland ZENOTEC mini
7,0 to 8,5
AmannGirrbach ceramill® motion
7,0 to 8,5
AmannGirrbach ceramill® argotherm
6,5 to 8,0
Planmeca PlanMill 50
6,5 to 8,0
vhf camfacture S1
6,5 to 8,0
vhf camfacture-S2
6,5 to 8,0
vhf camfacture-K4
6,5 to 8,0
Datron D1
5,5 to 7,0
Zirkonzahn (M1, M3, M4, M5, M6)
6,5 to 8,0
Roland DWX-4W
7,0 to 8,5
Ivoclar Vivadent PrograMill
(PM3, PM 5, PM 7)
6,5 to 8,0
All compressors are available with optional sound insulation.
In order to avoid pressure fluctuations stemming from other air users, it is recommended that the CAM system run on a separate compressed-air
network with dedicated compressor.
* Special feature: electronic control with easily adjusted pressure range, monitoring of air moisture and the option
of networking via Tyscor Pulse with a PC.
DÜRR DENTAL AG
Höpfigheimer Strasse 17
74321 Bietigheim-Bissingen
Germany
www.duerrdental.com
info@duerr.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising