PurgEye® 100 IP65 WELD PURGE MONITOR® Sealed Dustproof and Waterproof HFT® bring to the market place a World “first”, and fully accredited IP65 standard rated Weld Purge Monitor®. The PurgEye® 100 now has a dustproof and waterproof outer case that prevents the ingress of dust or moisture even to the extent of having hard water spray directed against it. MAIN FEATURES: More new features make the PurgEye® 100 IP65 incredible value for money and the best technical choice available. • New IP65 dustproof and waterproof accredited. • Vacuum brazed stainless steel probe assembly. • Robust carry / presentation storage case. • Auto safety break wrist or neck carry strap. • Push button ‘auto calibration’ feature. • Low battery indicator and low sensor indicator. • Enlarged screen and larger digits. The PurgEye 100 will indicate oxygen levels from 20.94% down to 100 ppm (0.01%). • Tripod mount. PurgEye , the only genuine Weld Purge Monitor on the market, developed by HFT® original innovators and manufacturers for over 40 years. • Protective rubber cover (optional). • Special leak tight quick connect/disconnect fittings for gas purge tubing. • Automatic sleep mode when not in use. The innovative push button auto calibration facility allows the user to calibrate at atmospheric level and again at the lowest oxygen reading for increased accuracy. ® ® Keeping your Eye on the Purge! ® SOME ADVANTAGES and KEY FEATURES : IP65 Sealed Dustproof and Waterproof Accredited Dustproof standard rated 6 dust tight (no ingress of dust) and waterproof standard rated 5 protected against water jets (water projected from a nozzle against the enclosure from any direction shall have no harmful effect). Vacuum Brazed Stainless Steel probe Assembly Auto Calibration Feature Calibrate your own monitor at any time without having to return it to the factory. Also, each time you weld to ensure that your readings are the most accurate possible. The calibration facility even has the ability at the touch of a small button to calibrate both at atmospheric level of 20.94% and at 0.01% (100 ppm) level of oxygen. Leak tight ‘one piece’ sealed assembly prevents erroneous readings due to leaks in connections. More Robust Carry/Presentation Storage Case Ergonomically designed case with double sided preformed cut outs, give a safe location for each part of your PurgEye® instrument. Auto Safety Break Wrist Or Neck Carry Strap Quality lanyard fitted with an auto break. Automatic Sleep Mode When the monitor registers more than 20% oxygen for periods longer than 1 hour, it will automatically switch off to conserve sensor and battery life. Tripod Mount A rugged tripod mount has been integrated into the housing. This allows the PurgEye® 100 IP65 Weld Purge Monitor® to be firmly mounted on a tripod of your choice. With mounting the instrument on a tripod, easy visual observation is provided so you can see the PurgEye® 100 from any part of the working space. A range of tripods or other fixing Instruments are available on which you can mount and station your PurgEye® 100. Enlarged Easy To Read Screen © HFT® Low Sensor Indicator You will never again be with an unusable monitor! The “low sensor level signal”, allows plenty of time to obtain a new sensor which you can simply fit and calibrate yourself. Low Battery Indicator The PurgEye® 100 Weld Purge Monitors® have a low battery indicator that appears in the corner of the screen. This was a feature designed for the first time in the earlier models, such as the Mark V (MKV) meter which used old technology in comparison to this revolutionary latest PurgEye® 100 model. The new enlarged screen uses 24 mm height digits for easy viewing at longer distances from the work station. These digits are approximately 41% larger than the previous obsolete MKV model. Immediate Welding After connecting the PurgEye® 100 to the purge gas exhaust, you will have immediate readings showing reduction of oxygen down to your desired level. Guaranteed Accuracy The PurgEye® 100 Weld Purge Monitor® indicates oxygen levels from 20.94% down to 100 ppm (0.01%), so use an Argweld® PurgEye® Weld Purge Monitor® everytime for guaranteed accuracy of oxygen indication to allow a weld start with minimal risk of oxidation. TECHNICAL DATA: The PurgEye® 100 is shipped in a new low volume ergonomically designed, attractive, more robust carry / presentation and storage case to maintain the instrument in good condition and to keep it together with all accessories. The PurgEye® 100 can be used with any pipe welding system, any weld purging chamber or weld purging enclosure. The sensor is easy to replace and self calibrate using the advanced calibration features of the PurgEye® 100 and the specially written algorithm that provides extreme accuracy at 0.1% where it is especially important for weld purging. The PurgEye® 100 Weld Purge Monitor® Gas Detection and Analysing Instrument can be used as a continuously reading instrument with free flow of the purge exhaust gas across the sensor, or as a sampling instrument with the hand vacuum pump and the new vacuum brazed leak tight stainless steel probe assembly extracting samples from the purged volume, as and when desired. SPECIFICATIONS: PurgEye® 100 IP65 Accuracy Range Measuring 20.94% down to 100 ppm oxygen Range: (100 ppm to atmosphere) Accuracy: Size: At oxygen level 20.0% = ± 0.2% At oxygen level 2% = ± 0.02% 94 mm (top width) 58.5 mm (handle width) 199 mm high (from bottom to top of eyelet) 63 mm deep (with flow adaptor) 44 mm deep (without flow adaptor) Power:Battery type 2 x AA (included) Scale:LCD (liquid crystal display) 24 mm Ref: Obsolete MKV Model 17 mm 41% increase in size Weight:0.870 kg Supplied With • New leaktight vacuum brazed stainless steel probe for sampling. • New safety easy auto break lanyard for neck or wrist. • New strong ergonomically designed carrying storage presentation case. • 2 x AA batteries. • 2 meters of sampling hose. • Sampling bulb (vacuum pump). • User instruction booklet. PRODUCT CODES and SIZES: PurgEye® 100 IP65 Weld Purge Monitor®. Model part number API0100 (stock code). Dimensions with carrying storage case: 290 x 265 x 120 mm Nett weight Gross weight Volumetric weight 0.870 kg 1.1 kg 1.42 kg Instrument weight 0.870 kg instrument only (excluding carry case). ACCESSORIES, SPARES and REPLACEMENTS: • Gorilla tripod. • Camera tripod. • Sensor removal tool. • Rubber protective housing. Customs tariff for international shipments around the world: European customs tariff: International customs tariff: United States customs tariff: 9026 1089 9026 80 6000 9026 80 6000 PurgEye® 100 IP65 shown with protective rubber housing available as an accessory. Don’t use cheap instruments that are merely oxygen monitors which are re-labled or repackaged, use a purpose designed, high quality Weld Purge Monitor®. Our complete range of Weld Purge Monitors® Other HFT® Weld Purging Products Argweld® Inflatable Tube Pipe & Pipeline Weld Purging Systems Argweld® PurgEye® Weld Purge Monitors® PurgEye® 100 IP65 PurgEye® 300 Plus PurgEye® 200 IP65 Argweld® Weld Purge Film® & Weld Purge Super Adhesive® Argweld® Weld Backing Tape™ & Weld Purge Tape™ Argweld® Weld Trailing Shields® Argweld® Flexible Welding Enclosures® Argweld® Weld Purge Plugs™ & Orbital Welding Plugs PurgEye® 300 Nano PurgEye 600 Touch ® PurgEye® 500 Desk Techweld® MultiStrike® Tungsten Electrodes Techweld® MultiStrike® Tungsten Electrode Grinder Our HFT Pipestoppers® Division Nylon, Aluminium, Steel and Rubber Pipe Plugs and Inflatable Stoppers PurgEye® 1000 remote PurgEye® 1500 Site Freeze systems for making ice plugs up to 24”ø API0100 LFTA4 11-10-17 ME Huntingdon Fusion Techniques HFT Stukeley Meadow Burry Port Carms SA16 0BU United Kingdom (UK) Telephone +44 (0) 1554 836 836 Fax +44 (0) 1554 836 837 www.huntingdonfusion.com Email [email protected] ® E&OE. Copyright © HFT. All rights reserved. This publication may not be reproduced by any means without the written permission of Huntingdon Fusion Techniques HFT® Tradenames and logos are the property of HFT and registered ownership of HFT.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021