LubricationEQUIPMENT
www.groz-tools.com
Lubrication EQUIPMENT
CI-20
Groz has always exceeded the expectations of tool manufacturers and users world wide. Groz carefully makes each tool under
stringent quality control processes that are achieved in a hi-tech manufacturing environment.
A most modern & vertically integrated manufacturing facility spanning over 500,000 sq ft
Total quality & control via advanced horizontal & vertical
machining centres
Robotically armed & conveyorized double booth powder
coating plant with a capacity of 15 million sq inches /
month
Pressure die casting - Plc controlled semi automatic
equipment.
The heart of our operation is the design center, where
our research & product development specialists use high
end software & equipment to develop custom solutions
WHAT’S
NEW
www.groz-tools.com
19.2V
BATTERY
POWERED
GREASE
GUN
pg 30
ELECTRIC
DIESEL
PUMP
pg 4
pg 39
WASTE
OIL DRAIN
GRAVITY
FEED
FUEL
FILTER
SPIN ON
CARTRIDGE
STYLE
pg 26
pg 27
HEAVY DUTY
ELECTRIC
FUEL PUMPS
AIR
BLOW
GUN PROFESSIONAL
pg 44
WHAT’S
WHERE
www.groz-tools.com
GREASING EQUIPMENT / 04
FUEL EQUIPMENT / 27
04
06
08
08
10
11
13
15
27
30
31
33
38
Battery Powered Grease Gun
Manual Grease Guns
Air Operated Grease Guns
Grease Gun Accessories
Greasing Fitting
Manual Grease Pumps
Air Operated Grease Pumps
Grease Control Valves
OILING EQUIPMENT / 16
16
16
18
21
21
Manual Oil Pumps
Oil Pump Accessories
Air Operated Oil Pumps
Electric Oil Pumps
Oil Control Gun & Meters
WASTE OIL HANDLING / 25
25
26
Electric Fuel Pumps
Electric Diesel Pumps
Manual Fuel Pumps
Fuel Meters & Nozzles
Fuel Filters
SPECIALITY PUMP / 40
HOSE REELS / 41
DRUM HANDLING / 42
AIR LINE ACCESSORIES / 43
AIR BLOW GUNS / 44
Air Operated Double Diaphragm Pumps
Waste Oil Drain
Whilst every effort has been made to ensure accuracy of information given in this catalogue at the timeof going to print, November 2013, our
policy of continuous improvement determines the right to change specifications without notice. Customers must ensure that goods are suitable for
the purpose intended.
W
NE
maxpower
19.2V BATTERY POWERED
GREASE GUN
poweR
greasing
Comes with Blow Moulded
Case for convenient storage
when not in use
19.2V Cordless
Grease Gun
THAT provides
unmatched
power, torque
& efficiency
AUTOMOTIVE
resulting in
higher pressure
& more grease
per battery
INDUSTRIAL
charge
CONSTRUCTION
AGRICULTURE
GREASING
EQUIPMENT
19.2V BATTERY POWERED
GREASE GUN
•
Powerful 19.2V High Torque Motor
•
8,500 PSI (586 BAR) Output Grease Pressure
•
Grease Output upto 3 oz. (85 gms) / minute in
free flow
•
Automatic Air Bleeder
•
Additional Port to add Bulk Loader
•
Grease Gun Barrel with double lipped follower
for use with 14oz. (400 gm) grease cartridge or
500 cc Bulk Fill
•
30” High Pressure Hose with spring guard on
both ends (prevents hose from kinking)
•
High Pressure Grease / Coupler
•
Standard 1.5Ah Ni-Cd Battery Pack
•
An additional 1.5Ah Ni-Cd Battery Pack for uninterrupted greasing
•
One Hour Quick Charger (each battery charge
provides power to dispense upto 6 grease
cartridges in free flow condition
•
Designed for use by mechanics, technicians,
maintenance staff, farmers etc. for everyday
greasing & preventive maintenance jobs, from
automotive, trucking and fleet to agriculture,
construction & industry
BATTERY
CHARGER
1.5Ah Ni-Cd
BATTERY PACKS
8,500 PSI
(586 BAR)
SUCTION
FILL
Art. Nr.
CARTRIDGE
LOADING
Upto 3 oz. (85 gms) / minute
Description
Box Qty.
Grease Gun Assembly
BPGG/19/EU
Cordless Grease Gun with 220V/50 Hz. Battery Charger with EU Plug
1
RB/BPGG/19N
Rechargeable Battery, 19.2V, 1.5 Ah, Ni-Cd
1
BC/BPGG/19N/EU
1 Hour CE Energy Saving Battery Charger, 220V /50 Hz, 19.2V, EU plug
1
Spare Parts & Accessories
www.groz-tools.com
5
GREASING
EQUIPMENT
LEVER GREASE GUN - HEAVY DUTY
THE ULTIMATE
LEVER GREASE GUN
•
Aluminium head with air bleeder & bulk loader
•
Variable stroke feature built-in for usage in confined spaces
•
Resists back pressure, especially useful in chain tightening
of earth moving equipment
•
Develops: 10,000 PSI
•
Capacity: 500 gms bulk / 400 gms cartridge
For those who
want to be ahead
of the game!
•
Large barrel with capacity
of 650 gms, 30% more than
regular guns thus requiring less
frequent re-filling of grease
•
Heavy Duty
Aluminium
Head
30% Larger Piston Diameter
pushes out 50% more grease
per stroke, reducing time to
grease a joint by half
•
Large Venturi Grease inlet
designed for thick & heavy
grease, common in India
•
Operates with minimal lever
action, allowing usage in
confined areas
•
Solid Aluminum Grease Gun
head fitted with loader valve for
use with Grease Filler Pump
•
Heavy Gauge Drop Resistant
Steel Barrel in premium metallic
powder coated finish
•
Hi Compression spring for
removing air pockets from
grease
•
Works with NLGI 1, 2 & 3 greases
•
Fully serviceable with no riveted
parts
•
Develops: 10,000 PSI
Art. Nr.
K45R/B
Severe Duty
Lever Handle
Strong
Aluminium
Head
Drop
Resistant
Steel Barrel
Capacity:
650 gms
10,000 PSI
(690 BAR)
Rubber
grip for
convenience
in use
Non-Slip,
textured, powder
coated finish
Heavy duty
Grease
Gun Head
incorporates
a bulk
loader & an
air bleeder
valve
Variable
Stroke
Variable
Stroke
1gm / Stroke
1.5gm / Stroke
Details
10,000 PSI
(690 BAR)
Box Qty.
Art. Nr.
Details
Box Qty.
10
G1R/HD/B
150mm rigid steel extension & 4 jaw coupler
16
150mm rigid steel extension & 3 jaw Super Coupler
LEVER
GREASE GUNS
•
21st century design - ideal
combination of superior
quality & value price
•
Aluminium Die Cast head with
built-in air release valve
•
Choice of high visibility orange
powder coated finish or
textured black
•
Develops: 6,000 PSI
•
Capacity: 500 gms bulk / 400
gms cartridge
6
V1R/B
6,000 PSI
(413 BAR)
1gm / Stroke
Art. Nr.
Details
Colour
BoxQty.
V1R/B
150mm rigid steel
extension & 4 jaw
coupler
Orange
16
V1R/BL/B
150mm rigid steel
extension & 4 jaw
coupler
Black
16
www.groz-tools.com
LEVER GREASE GUN - SUPER VALUE
•
Most popular value priced Grease Gun
•
Steel head incorporates a bulk loader valve
•
Rubber grip on lever handle for comfortable use
•
Powder coated finish
•
Develops: 6,000 PSI
•
Capacity: 500 gms bulk / 400gms cartridge
PISTOL GREASE GUN
6,000 PSI
(413 BAR)
•
One Hand Operation
•
Aluminum Die cast head
with steel block nut
•
Ideal for greasing fittings
with limited access
•
Develops: 5,000 PSI
•
Capacity: 500 gms bulk /
400 gms cartridge
1gm / Stroke
5,000 PSI
(345 BAR)
Art. Nr.
G1R/B/T/EC/BL
Details
Box Qty.
With 150mm rigid steel extension
& 4 jaw coupler
16
0.5gm / Stroke
Art. Nr.
G5R/B
Details
With 100mm rigid steel extension & 4 jaw coupler
Box Qty.
16
MINI PISTOL GREASE GUN – PROFESSIONAL
Mini Lever Grease Gun
Compact
tool box size
Grease Gun
•
Toolbox Size
Deluxe Mini Pistol
Grease Gun
•
Aluminium
Die Cast Gun
Head
•
Aluminum cast
head with front &
top discharge ports
•
Develops:
6,000 PSI
•
•
Capacity:
120cc bulk/
85 gms grease
cartridge
Ideal for greasing in
tight spaces such as
CNC machines
•
Develops: 3,500 PSI
•
Capacity: 120 gms
bulk/ 85 gms grease
cartridge
5m
23
•
m
6,000 PSI
(413 BAR)
Art. Nr.
G14R/B
3,500 PSI
(240 BAR)
0.55gm / Stroke
Details
150mm steel extension and 4 jaw coupler
www.groz-tools.com
0.30 gm / stroke
Box Qty.
Art. Nr.
Details
Box Qty.
30
G-16/B
100mm rigid steel extension & 4 jaw coupler
30
7
GREASING
EQUIPMENT
GREASE CARTRIDGE
AIR OPERATED GREASE GUN –
CONTINUOUS
Made in USA
•
400 gms of Premium Lithium Complex
Red Grease
•
NLGI Grade II
•
Operating Temperature: – 40°C to 149°C
•
Non messy, totally clean, offers highest
convenience in use
•
Useful in automotive, industrial,
construction & agricultural applications
•
For use with Groz Grease Guns
•
Continuous flow of grease with press of the trigger
•
Air Inlet Pressure: 60 - 120 PSI (4-8 BAR).
•
For use in factory maintenance, fleet, trucks etc.
•
Develops: 4,800 PSI
Art. Nr.
Capacity
Box Qty.
•
Capacity: 500 gms bulk / 400 gms cartridge
CTG/01
400 gms
10
Heavy Duty
Aluminium
head
4,800 PSI
(330 BAR)
Comfortable in
use - Pistol grip
design
upto 400gms / min
Art. Nr.
AGG/1R/B
Details
Box Qty.
150mm rigid steel extension & 4 jaw coupler
4
GREASE GUN COUPLERS
•
High Performance
Couplers
•
Available in 3 or 4 jaw
construction. Jaws are
made from hardened
spring steel
•
Incorporate a spring
loaded ball check
mechanism
•
Threaded 1/8”BSPT(F)
•
Available in 3 types:
Standard, Professional &
Heavy Duty
PUSH TYPE GREASE GUNS
•
Toolbox size, spring loaded
Push type Grease Guns
•
Steel body fitted with
universal connector
•
Ideal for greasing of Impact
Wrenches, Chain Saws,
Trailers, Pallet Trucks etc.
•
Develops: 1,000 PSI
Align Push Gun straight with fitting
Standard 3,000 PSI
For hand operated
grease guns only
Professional 6,000 PSI
For hand operated
grease guns only
Heavy Duty 10,000 PSI
For hand & air operated
grease guns
Push with palm of hand
Art. Nr.
1,000 PSI
(69 BAR)
0.90gm / Shot
Art. Nr.
Capacity
Box Qty.
G6P
30 gms
30
G7P
125 gms
20
8
PressureRating
Nr. of Jaw
Box Qty.
HC/11/4/B
Standard
Type
3,000 PSI
4
500
HC/14/3/B
Professional
6,000 PSI
3
500
HC/14/4/B
Professional
6,000 PSI
4
500
HC/12/3/B
Heavy Duty
10,000 PSI
3
500
HC/12/4/B
Heavy Duty
10,000 PSI
4
500
HC/11/4/B/ST54
Set of 54 Standard
4 jaw couplers
3,000 PSI
4
1
HC/14/4/B/ST54
Set of 54 Professional
4 jaw couplers
6,000 PSI
4
1
www.groz-tools.com
360° SWIVEL COUPLER
•
Ideal for greasing of
difficult & hard to
reach fittings
•
Swivels in full 360°
circle & locks at any
45° position
•
•
Hardened Spring Steel
Jaws
Dual purpose tool for removing worn & broken grease
fittings and re-tapping holes for installing new fittings
•
Built-in hardened tap for re-tapping holes
•
3 jaw construction
with ball check
•
Works well with straight & angled fittings
•
Hardened coupler
body withstands high
pressure applications
without deformation
Art. Nr.
Box Qty.
HC/SW/3/B
10
4 WAY GREASE FITTING TOOLS
For installing
straight grease
fittings
7,000 PSI
(483 BAR)
Hardened
tap for
re-tapping
holes
For Hand Operated
Grease Guns Only
Art. Nr.
BUTTON HEAD COUPLERS
•
Zinc Die cast
body
•
Mostly used
on heavy
machinery &
contractors
equipment
•
3 Types:
Push-On,
Hook-On &
Swivelling
For installing
angled Grease
Fittings
Installs Fittings
Tap Rethreads
ESO/1
M6 X 1, M8 X 1
ESO/2
1/8” BSPT, M8 X 1, M10 X 1
For greasing of
button head
grease fittings
•
Screw extractor
for removing
worn & broken
grease fittings
Box Qty.
1/4” SAE (LT)
10
1/8” NPT
10
GREASE FITTING THREAD TESTER
BHC/10/B
•
Great tool box accessory to sort out mixed fittings
•
Aluminium construction with mounting holes
HOC/1/B
Designed to check the following threads:
Thread Type
Size
NPT
For Hand Operated
Grease Guns Only
Art. Nr.
PCN/1/B
Type
PCN/2/B
PCN/3/B
Pressure
Rating
For Button Head
Fitting Size
Box
Qty.
1/8"
1/4"
METRIC
M6 X 1
M6 X 0.75
METRIC
M8 X 1
M8 X 1.25
METRIC
M10 X 1
M10 X 1.5
BSPT
1/8"
1/4"
3/8"
BHC/10/B
Heavy Duty Swivelling
3,000 PSI
16mm
20
UNF/ANF
1/4"
5/16"
3/8"
HOC/1/B
Fixed Hook On
3,000 PSI
16mm
50
BSW
1/4”
5/16"
1/2"
PCN/1/B
Fixed Push On
3,000 PSI
16mm
50
BSF
3/16"
1/4"
5/16”
PCN/3/B
Fixed Push On
6,000 PSI
16mm
20
PCN/2/B
Fixed Push On
7,500 PSI
22mm
20
www.groz-tools.com
Art. Nr.
Box Qty.
THT/01
5
3/8"
9
GREASING
EQUIPMENT
GREASE GUN HOSES
•
For greasing fittings
with difficult access
•
Thermoplastic
Construction, Fully
Flexible
•
Zinc plated steel end
connections threaded
1/8” BSPT (M) are
hydraulically crimped to
the hose
GREASE FITTINGS
•
Head profile as per DIN 71412
•
Heat treated greasing end
•
Zinc Plating exceeds ASTM B117
•
Fittings have heat treated springs for
increased life
Grease
Fitting –
Straight
Art. Nr.
For Hand Operated
Grease Guns Only
Working Pressure: 3,500 PSI
Burst Pressure: 10,000 PSI
6,000 PSI
413 (BAR)
Angled
Grease Fitting
- 45°
Description
Angled
Grease Fitting
- 90°
Hex Size
Overall Length
Box Qty.
7mm
16mm
100
6.0 x 1.0mm Taper Threads
GFT/6/1
Straight
GFT/6/1/45
45°
9mm
21mm
50
GFT/6/1/90
90°
9mm
18mm
50
Straight
9mm
16mm
100
45°
9mm
21mm
50
90°
9mm
18mm
50
Art. Nr.
Length (end to end)
Box Qty.
GHC-12/B
300mm (12”)
30
8.0 X 1.0mm Taper Threads
GHC-18/B
450mm (18”)
20
GFT/8/1
GHC-20/B
500mm (20”)
10
GFT/8/1/45
GFT/8/1/90
10.0 X 1.0mm Taper Threads
GREASE GUN STEEL EXTENSIONS
GFT/10/1
Straight
11mm
16mm
100
GFT/10/1/45
45°
11mm
21mm
50
GFT/10/1/90
90°
11mm
18mm
50
•
Steel construction
10.0 mm X 1.5 mm Taper Threads
•
Zinc plated finish
GFT/10/1.5
Straight
11mm
18mm max.
100
High strength rolled 1/8” BSPT(M)
threads on both ends
GFT/10/1.5/45
45°
11mm
21mm max.
50
GFT/10/1.5/90
90°
11mm
18mm max.
50
•
1/8” X 28 BSPT - Taper Threads
GFT/R/1-8/28
Straight
11mm
16mm
100
GFT/R/1-8/28L
100
Straight
11mm
20mm
GFT/R/1-8/28/45
45°
11mm
21mm
50
*GFT/R/1-8/28/45L
45°
11mm
26.3mm
50
GFT/R/1-8/28/90
90°
11mm
18mm
50
*GFT/R/1-8/28/90L
90°
11mm
21.4mm
50
1/4” X 19 BSPT - Taper Threads
Working Pressure: 6,000 PSI
Burst Pressure: 12,000 PSI
For Hand Operated
Grease Guns Only
Art. Nr.
Length (end to end)
Type
Box Qty.
GBP/6/B
150mm (6”)
Bent
50
GSP/4/B
100mm (4”)
Straight
20
10
GFT/R/1-4/19
Straight
9/16”
17.5mm
50
*GFT/R/1-4/19L
Straight
15.24mm
23.5mm
50
GFT/R/1-4/19/45
45°
9/16”
22.5mm
25
GFT/R/1-4/19/90
90°
9/16”
22mm
25
www.groz-tools.com
FOOT OPERATED GREASE PUMP
•
High Pressure Portable Grease Pump for quick effortless greasing in
everyday lubrication such as greasing of excavators & other earth moving
equipment, agricultural equipment, automotive etc.
•
Hands free operation; pump operates using the Foot Lever, which greatly
reduces effort & allows high pressure greasing with highest comfort
•
Can be operated by hand when under low machinery
•
Economical, pump is operated by a single person & uses low cost bulk grease
•
World’s Most Advanced High Pressure Grease Pump
•
Designed with all moving parts submerged in the same grease which needs
to be pumped, thereby staying lubricated at all times
•
For use in Workshops, site applications, tractors,
escavators, chain tightening etc.
•
Moving parts create wave action in grease, auto removing air pockets &
eliminating the use of a Follower plate
•
Converts from High Pressure to High Volume
•
One Hand Operation
•
Includes rubber lined follower plate
PORTABLE GREASING SYSTEM
•
Pump delivers over 2 gms of grease per stroke & develops 8700 PSI (600 BAR)
•
Works with NLGI 1, 2 & 3 Greases
Lift handle
Switch for High
Pressure/ High
Volume Setting
Pistol handle
fitted with
Steel Grease
Extension &
professional
coupler
Steel Drum Cover
Foot Operated
Super Gun with
360° Swivel
Includes
2m x ¼” ID
high pressure
rubber hose
Steel Bucket
with 10 kg
capacity
High Pressure Hose:
1.5m x 1/2” ID
Nozzle Holder
Foot Lever
Includes 5 kg
grease bucket
Rubber
pads
10,000 PSI
690 (BAR)
1.25 gm / stroke on
High Volume Setting
8,700 PSI
(600 BAR)
Common sight on construction
equipment requiring high
volume routine greasing
Art. Nr.
Capacity
Box Qty.
FOP/10A
10 kg
1
www.groz-tools.com
Upto 2 gms / stroke
Art. Nr.
Capacity
Box Qty.
GS/5
5 kg
1
11
GREASING
EQUIPMENT
BUCKET GREASE PUMPS
•
High Volume High Pressure Bucket
Grease Pump
•
For use with agricultural, earth moving
equipment & in automotive applicationsespecially useful in applications requiring
frequent greasing
•
For use with NLGI 1,2 & 3 greases
•
Includes rubber lined follower plate
Lift handle
Variable handle setting
Swivel
Connector,
allows easy
manoeuvrability
of hose without
hose kinking
Air Release valve for easily
removing trapped air from
grease
Max. Grease
level marked
on the Grease
Bucket
High
Pressure
Hose:
2m x 1/4” ID
Steel Bucket with
foot rest
VGP/10A
(without
wheels)
Upto 4,000 PSI
(275 BAR)
Upto 9 gm / stroke on
High Volume Setting
VGP/6
(with wheels)
VGP/10
(with wheels)
VGP/15
(with wheels)
Art. Nr.
Variable Handle Setting
High Pressure Setting
Develops 4000 PSI with
grease discharge of 4
gms per stroke
Medium Pressure Medium Volume Setting
Develops 3000 PSI with
grease discharge of
7gms per stroke
High Volume Setting
Develops 2000 PSI with grease
discharge of over 9 gms per stroke.
Useful for bulk filling grease guns
12
VGP/20
(with wheels)



Key
Capacity
Details
Box Qty.
VGP/6A
6 Kgs
Without wheels
1
VGP/6
6 Kgs
With wheels
1
VGP/10A
10 Kgs
Without wheels
1
VGP/10
10 Kgs
With wheels
1
VGP/15
15 Kgs
With wheels
1
VGP/20
20 Kgs
With wheels
1
ZSA/HOS/VGP10A
84” Spare Hose
FLP/195-225/3
Spare Follower Plate
KIT/05/VGP
Repair Kit
10
1
100
 New
www.groz-tools.com
Air Operated Grease Ratio Pumps 50:1
•
World-class Industrial High Pressure Grease pumps with
guaranteed performance & hassle free operation
•
Pump dispenses Grease at pressures upto 50 times the Air
inlet pressure
•
Designed to work in tough conditions - these are ideal for
use in Industry, workshop, farm , construction or as part of
the Mobile Grease system
•
All metal construction , fully CNC machined with hardened
wear resistant moving parts
•
Reciprocating piston operated 63 mm dia. Air Motor
•
Fitted with strainer at suction tube inlet for clean grease to
the bearing
•
Supplied complete with Drum Cover, rubber lined follower
plate, 7’ (84”) of high pressure grease hose, Z swivel &
professional grease control valve
•
Portable version available with built-in steel drum,
complete with wheels & pull handle
Control Valve threaded
1/4” (F) at inlet and 1/8”
(F) at outlet
Z swivel
threaded ¼”
(M) x ¼” (F)
Available as spare:
84” high pressure
hose threaded
¼” (M)
RECOMMENDED USE:
With light and self collapsing grease up to NLGI No. 2
Working Pressure
2 – 10 BAR (30 to 150 PSI)
Maximum Air Pressure
10 BAR (150 PSI)
Maximum Outlet Pressure
500 BAR (7500 PSI)
Air Inlet Connection
¼” BSP (F)
Pump Outlet Connection
¼” BSP (F)
Air Consumption
230 lt / min
Grease Output (NLGI No. 2 Grease)
Upto 1.10 kg / min
Noise Level
81 db
7,500 PSI
(500 BAR)
Pump must be supplied with
clean & dry compressed air via
an FRL unit
Art. Nr.




Key
GP2:
For use with 50
kg pails. Suction
tube length 730
mm
Bucket
Capacity
BGRP/50
Portable Grease Pump with built
in 50 kg Grease Bucket
Box Qty.
BGRP/15
15 kg
1
BGRP/30
30 kg
1
BGRP/50
50 kg
1
FLP/550-612/6/GP3
Spare Follower Plate
1
Art. Nr.
Fits
Drum Cover
Diameter
BGRP/30
Portable Grease Pump with
built in 30 kg Grease Bucket
Follower Plate Dimensions
Box Qty
O.D. Steel end
O.D. Plate
I.D. Grommet
KIT/TP/RP-G
1
GP1/ST/501/BSP
20-30 kg pails
310 mm
241 mm
288 mm
29.5 mm
1
KIT/BTM/RP-G
1
GP2/ST/501/BSP
50-60 kg pails
381 mm
322 mm
380 mm
29.5 mm
1
GP3/ST/501/BSP
180 kg drums
612 mm
550 mm
602 mm
29.5 mm
1
 New
www.groz-tools.com
13
GREASING
EQUIPMENT
Maxilube® air operated 50:1 grease pump
•
•
•
•
•
Highly Reliable Air Operated 50:1 pump for
dispensing Grease at 50 times the pressure as
the Air Inlet
Working Pressure
4–10 BAR (60 to 150 PSI)
Maximum Air Pressure
10 BAR (150 PSI)
Award Wining Pump design with a non
corroding air motor that requires no
Lubricator in the Air line
Maximum Outlet Pressure
500 BAR (7500 PSI)
Air Inlet Connection
¼” NPT (F)
Ideal for use in Automotive workshops for use
with light & self collapsing grease upto NLGI
no. 2
Pump Outlet Connection
¼” NPT (F)
Air Consumption
270 lt / min
Grease Output
(NLGI No. 2 Grease)
0.460 kg / min
Noise Level
85 db
Built – in Pressure Relief valve prevents
both the pump & system against damage
created by excessive pressure due to thermal
expansion
Supplied complete with Drum Cover, Rubber
Lining Follower Plate, 84” High Pressure
Rubber Hose & Booster Grease Control Valve
fitted with Z Swivel, Steel Extension & coupler
Art. Nr.
P8-G
Description
Maxilube
Fits
Drum
Cover
Diameter
Follower Plate
Outer
Diameter
Box Qty.
180 kg Drum
24 ½”
602 mm
1
7,500 PSI
(500 BAR)
PORTABLE GREASING
SYSTEM
Founded in 1948 in Australia, Macnaught
has been a pioneer in product design
and manufacturing of fluid handling
equipment. The wide range of products
manufactured by Macnaught includes
hand and air operated grease guns and
pumps, hand and air operated oil pumps,
oil and grease control guns, oil and fuel
meters, heavy duty hose reels and an
extensive range of accessories to suit
these items.
Macnaught range of high end products
are available to you exclusively via
Groz. Contact your nearest Groz dealer /
distributor for further details.
14
•
Designed to cater to daily bulk greasing
needs at workshops requiring movable
systems
•
Includes :
1. Maxilube® Air Operated 50:1 pump
suitable for 180 kg drums
2. Pump complete with drum cover,
follower plate, 84” high pressure
grease hose
3. Booster Grease Control Valve
4. Retracta Grease Hose Reel
5. Drum Trolley for 180 kg drums
Art. Nr.
Box Qty.
GS100-G
1
www.groz-tools.com
Grease Control Valve –
Metered
•
Premium quality Grease Control valve, for use with air operated
grease pumps
•
Built-In High Accuracy Digital Grease Meter for dispensing exact
amount of grease
•
Ability to measure amount of grease dispensed prevents both
over & under lubrication & is invaluable in saving bearing failures
•
Provides continuous grease flow, with trigger fully pressed
•
Steel construction, provides durability & longevity. Meter uses
oval gear technology
•
Ergonomically designed pistol handle
•
Comes complete with 6” steel extension, heavy duty coupler &
360° Z Swivel
GREASE CONTROL VALVEPROFESSIONAL
•
Oval Gear
Mechanism
Control Valve Type
Continuous Flow
Meter Type
Digital Oval Gear
Grease Flow
0.1 to 2.5 kg / minute
Max. Working Pressure
8000 PSI (550 BAR)
Unit of Measurement
Kg
Accuracy
+/- 3%
Resettable Batch Total
9,999 gms
Cumulative Total
99999.9 kg
Battery Type
1.5 V (Two numbers)
Art. Nr.
•
Dispenses Grease at the same
pressure as the pump outlet
pressure
•
Designed to Handle Grease upto
pressures of 7500 PSI
•
Valve inlet fitted with 360°
Z Swivel which permits easy
handling of the valve and
prevents damage to hose caused
by twisting
•
Comes complete with 6” Steel
Extn. & Heavy Duty Coupler
Maximum Pressure
7,500 PSI (517 BAR)
Inlet Threads
Box Qty.
¼” BSPT (F)
1
GREASE CONTROL VALVE – BOOSTER
•
Grease Control Valve for use
with Air Operated Grease
Pumps
•
Highly Durable All Steel
Construction, fully CNC machined
•
Built-In Pressure Boost Mechanism
allows Grease Pressure to be Boosted
from 6000 PSI to 10,000 PSI
•
Pressure Boost is activated by a few
repeated presses of the Pistol handle
•
Pressure Boost helps unclog blocked
grease fittings & grease joints with
high back pressure
•
Valve inlet fitted with 360° Z Swivel
which permits easy handling of the
valve and prevents damage to hose
caused by twisting
•
Comes complete with 6” Steel Extn. &
Heavy Duty Coupler
Maximum Pressure
8,000 PSI (550 (BAR)
Thread Specification
Box Qty.
APG/04/Z/1-4F/GM/B
Meter Fitted
to a Grease
Control Valve
Inlet:
1/4” BSPT (F)
1
DGM/2/N
In-Line
Grease Meter
Inlet/Outlet:
1/8” BSPT
1
www.groz-tools.com
Highly Durable All Steel
Construction, fully CNC machined
APG/HD/04/Z/1-4F/B
CAUTION
The gun is continuous
action. Be careful not to
over lubricate.
Description
•
Art. Nr.
Skin Injection Hazard.
Keep away from nozzle
DGM/1/B
Grease
Meter
available
as spare
for in-line
applications
Grease Control Valve for use
with Air Operated Grease
Pumps
Maximum Pressure
10,000 PSI (690 BAR)
Art. Nr.
Inlet Threads
Box Qty.
APG/Z/1-4F/B
1/4” BSPT (F)
1
15
EZEE FLO PUMP
OILING
EQUIPMENT
LEVER ACTION
BARREL PUMP HEAVY DUTY
•
Versatile pump for
trouble-free use on 50
litre plastic packs
•
Steel pump assembly,
plastic pump head &
lift handle
•
Includes 4’ soft PVC
discharge hose &
curved steel spout
The Reike adaptor screws
onto the plastic pull-out
Rieke spout
1 litre / 15 strokes
•
Aluminium Die
cast pump head
with
steel
body
•
3/4” pump inlet
•
Includes
telescopic suction
tube
•
Suitable for 50-210
litre drums
•
Used for
transferring oil
based fluids,
heating oils, motor
oils, heavy & light
oils, kerosene &
diesel
Art. Nr.
EZF/8
DrumCapacity
Box Qty.
50 litres
10
V SERIES BUCKET OIL PUMPS
•
Steel pump complete
with steel bucket, drum
cover, lift handle and 4’
soft PVC discharge hose
•
Variable handle setting
for use with oils of
different viscosities
•
Useful for convenient
movement & transfer
of oils in shop floors &
workshops
300 ml / stroke
upto 125 ml / stroke
Art. Nr.
Drum Capacity
Box Qty.
Art. Nr.
Box Qty.
V12
12 litres
1
LBP/04/PT
10
V16
16 litres
1
OIL CANS
ROTARY BARREL PUMP
•
Solid cast iron construction
•
2 way operation
•
3 piece threaded steel suction
tube with filter
•
1” pump inlet
•
Suitable for 50-210 litre drums
•
Useful for transferring oil, diesel,
kerosene & other non-corrosive
media
Dual
Directional
Operation
Pumps-In &
Pumps-Out
fluids by a few
reverse turns of
the handle
Art. Nr.
5 litres / 20 turns
16
V25/3R/SPL/F
•
Tin coated steel
body in premium
powder coated finish
•
Steel pump with double
ball check
•
Useful for convenient
dispensing of oil
•
Comes complete with
150mm (6”) rigid steel
spout
Box Qty.
4

Art. Nr.
Capacity
Box Qty.
V200R
200 ml
72
V300R
300ml
72
V500R
500ml
72
Key
 New
PLASTIC MEASURES
•
Translucent
Polyethylene
construction
with marking
in litres on one
side
•
Complete with
flexible spout
and cap & lid for
the container
•
Used for
transferring
measured
quantities of
fluids
•
Not to be used
for measuring
Media for Sale
why us?
we offer
training,
merchandising &
comprehensive
sales support
Art. Nr.
Capacity
Box Qty.
MSR/P/F-1
1 litre
40
MSR/P/F-2
2 litre
25
MSR/P/F-3
3 litre
20
MSR/P/F-5
5 litre
15
why us?
we give you
customized
solutions for your
specific
requirements
PLASTIC FUNNELS
•
Anti-splash & spillproof Funnels
•
Polypropylene
body with
built-in contours
for convenient
handling
•
Funnel rim is
curved inward
•
Complete with wire
mesh screen, dust
cover & flexible
spout
•
2” Bung on FNL/9B
allows it to be used
directly on drums
why us?
because
excellence
is our
minimum
standard
2” Bung on FNL/9B
allows direct
attachment on drum
Art. Nr.
Capacity
Box Qty.
FNL/8
1.7 litres
15
FNL/9B
3 litres
15
www.groz-tools.com
why us?
our tools are used
worldwide
for a large
variety of
applications
17
OILING
EQUIPMENT
ODS/T3/11B/BSP
Air Operated
Oil Ratio Pumps
VARIANTS - 1:1 PUMPS
•
World-class Industrial Oil Dispensing pumps with
guaranteed performance & hassle free operation
•
Pumps are designed to work in tough conditions
& are ideal for use in Industry, workshop, farm ,
construction or as part of the Mobile Oil system
•
All metal construction, fully CNC machined with
hardened wear resistant moving parts
•
Reciprocating piston operated 63 mm dia. Air
Motor
•
Pumps have a built in Strainer at inlet to keep
contaminants away
•
Transfer pump, used to quickly transfer
oils from large drums to smaller
containers. These have a Double Acting
operation with discharge upto 40 LPM
•
Ideal for use with low to medium
viscosity (upto SAE 80 Oils) for
transferring over short distances (5
metres)
•
Air Consumption: 270 LPM
•
1:1 pump is also available complete
with Oil bar tap & connecting links
(ODS series), used as an Air Operated
Oil Dispenser to quickly & conveniently
dispense Oils from Drums
Max Outlet
Pressure
150 PSI
(10 BAR)
Pump must be supplied with clean & dry
compressed air via an FRL unit
Working Pressure
2 – 10 BAR (30 to 150 PSI)
Air Inlet Connection
¼” BSP (F)
Pump Outlet
Connection
DOUBLE
ACTING
Art. Nr.
OP/T3/11B/BSP
upto 40 LPM
Description
Box Qty.
½” BSP (F)
OP/T3/11B/BSP
1:1 Pump Only for 210 Litre Drums
1
Noise Level
81 db
OPK/T3/11B/BSP
1
For use with
210 Litre Drums
1:1 Pump for 210 Litre Drums complete
with 1.5 m Hydraulic Hose & Oil Control
Gun (OGY)
Air Operated Stainless Steel 3:1 Pump
•
•
•
•
•
3:1 Air Operated pump,
corrosion protected for use
with water based fluids, such
as Detergents, Windshield
Fluids, Water etc.
Working Pressure
2 – 10 BAR (30 to 150 PSI)
Discharge
Upto 14 LPM
Air Consumption
230 LPM
Wetted components are
made out of Stainless Steel
Air Inlet Connection
¼” BSP (F)
Pump Outlet Connection
½” BSP (F)
Pump is designed to work
in corrosive environments,
ideal for use in Car Washers,
Garages, Workshops, Lube
Trucks, Industry etc.
Noise Level
81 db
For use with
210 Litre Drums
Reciprocating piston
operated 63 mm dia. Air
Motor
Pumps have a built in
Stainless Steel Strainer at
inlet to keep contaminants
away
18
Pump must be supplied
with clean & dry
compressed air via an
FRL unit
upto 14 LPM
Art. Nr.
Description
Box Qty.
OP/T3/SS/BSP
3:1 Pump Only for 210
Litre Drums
1
Stainless
Steel
Suction
Tube
www.groz-tools.com
VARIANTS - 3:1 PUMPS
VARIANTS - 5:1 PUMPS
•
Amongst the most popular
general purpose air operated
pumps
•
High Pressure air operated pumps
for dispensing oil at 5 times the
pressure as the air inlet
•
Pumps are single acting with
discharge upto 14 LPM
•
Pumps are double acting with
discharge upto 18 LPM
•
Ideal for use with medium
to high viscosity oils (upto
SAE 130) for transferring
over short distances ( upto
30 metres), mostly used with
Trolley mounted kits
•
•
Air Consumption: 230 LPM
Ideal for use with high viscosity
oils (upto SAE 240) for transferring
over short & long distances (upto
50 metres), mostly used with
Trolley mounted kits both with
& without Hose Reels, as well as
with fixed systems for centralized
distribution
OP/T3/31B/BSP
•
Max Outlet
Pressure
450 PSI
(30 BAR)
Art. Nr.
OP/T3/51B/BSP
Air Consumption: 250 LPM
Max Outlet
Pressure
750 PSI
(50 BAR)
upto 14 LPM
Description
DOUBLE
ACTING
Box Qty.
Art. Nr.
upto 18 LPM
Description
Box Qty.
OP/T3/31B/BSP
3:1 Pump Only for 210 Litre Drums
1
OP/T3/51B/BSP
5:1 Pump Only for 210 Litre Drums
1
OPK/T3/31B/BSP
3:1 Pump for 210 Litre Drums complete
with 1.5 m Hydraulic Hose & Oil Control
Gun (OGY)
1
OPK/T3/51B/BSP
5:1 Pump for 210 Litre Drums
complete with 1.5 m Hydraulic
Hose & Oil Control Gun (OGY)
1
Oilmaster air operated 5:1 oil pump
•
Highly Reliable Air Operated 5:1 pump for
dispensing Oils at 5 times the pressure as the Air
Inlet
•
Ideal for indoor applications in automotive
workshops for pumping Oils (upto SAE 140).
Dispenses Oils over distances upto 50 m, mostly
used with trolley mounted kits both with & without
hose reels
•
Unique Pump design with non corroding air
motor, requires no Lubricator in the air line
•
Built- in Pressure Relief valve prevents both the
pump & system against damage created by
excessive pressure due to thermal expansion
•
Reciprocating piston operated 72mm dia. Air Motor
•
Stub Pump supplied complete with 2” bung; pump
can be wall mounted, mounted on a tank, drum
etc.
•
Also included separate suction tube for installing
pump on 210 Litre Drums
www.groz-tools.com
Working Pressure
4 – 10 BAR (60 to 150 PSI)
Air Inlet Connection
¼” NPT (F)
Pump Outlet Connection
½” NPT (F)
Pump Inlet for connecting
Suction Tube
1" NPT (F) & 1" UNEF (F)
Noise Level
85 db
For use with
Drums, Tanks, Wall Mount etc.
Air
Inlet
Oil
Outlet
upto 15 LPM
Art. Nr.
Box Qty.
T512-G
1
DOUBLE
ACTING
Pump
inlet
19
OILING
EQUIPMENT
r-series™ industrial
air operated 3:1 oil pump
r-series™ industrial
air operated 5:1 oil pump
•
Heavy Duty Industrial 5:1 ratio pump for dispensing
Oils at 5 times the pressure as the Air Inlet
•
Solid all Metal Die cast Aluminum Construction
•
Ideal for dispensing oils through multiple hose reels
& metered gun systems found in large workshops
utilizing bulk tanks
Pumps Oils upto SAE 140 over distances upto 30 m
•
Pumps Oils upto SAE 140 over distances upto 50 m
Reciprocating piston operated 54mm dia. Air Motor
•
•
Stub Pump supplied complete with 2” bung, pump
can be wall mounted, mounted on a tank, drum etc.
Reciprocating piston operated 104mm dia. Air
Motor
•
•
Also included separate suction tube for installing
pump on a 210 Litre Drums
Stub Pump supplied complete with 2” bung, pump
can be wall mounted, mounted on a tank, drum etc.
•
•
Air Line Lubricator included as standard
accessory
Also included separate suction tube for installing
pump on 210 Litre Drums
•
Air Line Lubricator included as standard
accessory
•
Heavy Duty Industrial 3:1 ratio pump for dispensing
Oils at 3 times the pressure as the Air Inlet
•
Solid all Metal Die cast Aluminium Construction
•
Ideal for single dispensing or through multiple
hose reels & metered gun systems
•
•
Working Pressure
4 – 10 BAR (60 to 150 PSI)
Air Inlet Connection
¼” NPT (F)
Working Pressure
4 – 10 BAR (60 to 150 PSI)
Pump Outlet Connection
3/4” NPT (F)
Air Inlet Connection
¼” NPT (F)
Pump Outlet Connection
3/4” NPT (F)
Pump Inlet for connecting
Suction Tube
1” NPT (F) & 1” UNEF(F)
For use with
Drums, Tanks, Wall Mount etc.
Pump Inlet for connecting
Suction Tube
3/4” NPT (F)
For use with
Drums, Tanks, Wall
Mount etc.
Art. Nr.
Box Qty.
R300S-G
1
upto 23 LPM
Art. Nr.
Box Qty.
R500S-G
1
upto 28 LPM
Portable oil system
20
•
Ideal choice for workplace requiring movable oil
dispensing systems
•
Includes Oilmaster Air Operated 5:1 pump, retracta Oil
Hose Reel (OMP2101), Oil Control Gun with Mechanical
Meter (HG40), 210 Litre Drum Trolley & Hydraulic Hose to
connect Pump outlet to Hose Reel Inlet
•
Suitable for dispensing oils upto SAE 140 i.e Engine Oil,
Hydraulic Oil etc.
Art. Nr.
Box Qty.
OS512-G
1
www.groz-tools.com
Electric Oil PumpS
•
Heavy Duty Oil pump designed specifically to transfer bulk oils, hydraulic fluid,
Used Oil, antifreeze etc.
•
Non corroding Aluminium Die cast pump body
•
A high horsepower to flow ratio assures adequate power to pump viscous
fluids at low temperatures
•
Sintered Powder Metal Gears
•
Self priming, positive displacement design
•
Pump has an internal bypass valve to bypass flow, if the discharge pressure
exceeds the bypass valve setting
•
Built-In 2” Bung Adaptor for mounting on drums/ tanks
•
Air Cooled Motor with Thermal Protection
•
Can be used to transfer used oil with a screen fitted onto the Suction Tube
Description
Heavy Duty 220V AC
•
UL listed frame & motor components
Motor
1/2 HP 220V AC, 50/60 Hz.
Amp
6 Amp
Suction Pipe
34” long
Hose
3/4” x 8’
Inlet
1” NPT
Outlet
3/4” NPT
Dispensing Nozzle
Ball Valve
Power Cable
48” (1220 mm)
Max. Viscosity of Oil
SAE 90
Max. Working Pressure
65 PSI (4.5 BAR)
8’ x 3/4” Rubber Hose
Lift Handle
RECOMMENDED USE
Oils, Synthetic Oils, Antifreeze, Used Oil, Hydraulic
Fluids, Cutting Oils, Oil based Herbicides, Non
Flammable Oil Based Solvents, Liquid Soap etc.
Convenient Spin
Collar for easy
installation
2 pc threaded
suction tube

Art. Nr.
Flow Rate
RPM
Box Qty.
OPM/220
11.5 LPM
1720
1
OPM/220/HF
25 LPM
2800
1
Key
Power Cable
Oil Control Gun
 New
Oil Gun
with Steel
Extension &
Manual Non
Drip Nozzle
•
For use with Air Operated Oil Pumps upto 6:1
Pressure Ratio
•
Recommended Use: Oil, Gear Lube, ATF
In-Line Swivel
½” BSPT(F)
•
Gun dispenses by simple press of the trigger
Outlet Diameter of Steel Spout
½” (12.7 mm)
•
Built-in safety cum continuous Flow lever can
be slid over the trigger for continuous unattended dispensing; or alternatively under the
trigger to lock & prevent accidental dispensing
Inside Diameter of Hose Extension
½” (12.7 mm)
Max. Inlet Pressure
870 PSI (60 BAR)
Max. Flow rate
70 LPM
•
Built-in swivel threaded at inlet for easy
manoeuvrability
Working Temperature Range
-10°C to 60°C
•
Standard configuration includes steel outlet
extension & available as Gun Only or Gun with
manual non drip nozzle
•
Available with steel extension and manual non
drip nozzle
www.groz-tools.com
Art. Nr.
Box Qty.
With Manual Non Drip Nozzle
OGY/SM/1-2R/B
1
21
OILING
EQUIPMENT
MECHANICAL HEAVY DUTY
OIL CONTROL GUN
Mechanical Oil Control Gun
•
High accuracy light
weight gun for
controlling fluid deliveries
in most demanding
applications
•
Recommended Use: Oils
with viscosity upto 2000
cSt
•
Oval gear mechanism for
optimum accuracy
•
Aluminium Die cast meter
body with protective
shroud
•
Gun with Impact &
Weather resistant nylon
construction
•
Built-in safety cum
continuous Flow lever
can be slid over the
trigger for continuous
un-attended dispensing;
or alternatively under the
trigger to lock & prevent
accidental dispensing
•
Built In swivel at inlet for
easy manoeuvrability
•
Supplied complete with
rigid steel extension and
manual non drip nozzle
•
Heavy Duty Industrial Oil
Control Gun with Robust
Aluminium construction
& a rubberized shroud for
protecting the meter
•
For use with Engine Oils,
Diesel, ATF, Antifreeze,
Antiboil & other petroleum
based media upto SAE 140
•
Oval gear mechanism for
optimum accuracy
•
Latching handle with
built-in trigger lock for
continuous dispensing
•
Gun has 2 Outlet
positions - In Line & 90°
•
Built in Swivel at inlet &
supplied complete with
Steel Extension with
Automatic non-drip Nozzle
Note: Not to be used to measure
media for resale
Note: Not to be used to measure
media for resale
Flow rate
1 to 30 LPM
Inlet
½” BSPT (F)
Accuracy
+ / - 1%
Repeatability
+ / - 0.20%
Max. Working Pressure
1500 PSI (100 BAR)
Working Temperature range
0°C to 50°C
Max. Resettable Batch Total
999.9 Litres
9,99,999 Litres
Max. Non Resettable
Totalizer
9,99,999 Litres
Least Count /Resolution
0.10 Litres
Least Count /Resolution
0.10 Litres
Water Resistance
IP55
Water Resistance
IP55
Flow rate
1 to 30 LPM
Inlet
½” BSPT (F)
Accuracy
+ / - 1%
Repeatability
+ / - 0.20%
Max. Working Pressure
870 PSI (60 BAR)
Working Temperature range
-10°C to 60°C
Max. Resettable Batch Total
999.9 Litres
Max. Non Resettable Totalizer
Art. Nr.
OM/10/OGY/RM/B
22
Box Qty.
Art. Nr.
Box Qty.
1
HG40R/B
1
www.groz-tools.com
OIL CONTROL GUN WITH
ELECTRONIC PRE SET METER
Electronic
Oil Control Gun
•
Recommended Use: Oils with
viscosity upto 5000 cSt
Heavy Duty Industrial Oil Control Gun
with Robust Aluminium construction
& hard coat anodized body
•
•
Oval gear mechanism for
optimum accuracy
Electronic Preset design, works on 4
AA batteries
•
•
Electronic Display using two 1.5V
batteries
Dual Mode: Manual & Pre Set
(dispenses set quantity of media &
stops)
•
Aluminium Die cast meter body
with protective shroud
•
Oval Gear Mechanism for optimum
accuracy
•
Gun with Impact & Weather
resistant nylon construction
•
Resettable Totalizer for Individual
batch can be set in Litres, Quarts,
Pints & Gallons
•
Built-in safety cum continuous
Flow lever can be slid over
the trigger for continuous
un-attended dispensing; or
alternatively under the trigger
to lock & prevent accidental
dispensing
•
A second resettable Totalizer for
multiple dispense operations can be
set in Litres, Quarts, Pints & Gallons
with a Max. Pre Set Volume of 99.9
units
•
•
Supplied with Steel extension
& built In swivel at inlet for easy
manoeuvrability
Lifetime Non-Resettable Totalizer can
be set in Litres or Gallons
•
•
Measures in Litres, Quarts, Pints
& Gallons
For use with Engine Oils, Diesel,
ATF, Antifreeze, Antiboil & other
petroleum based media upto
SAE 240
•
Easy user re-calibration
•
Built in Swivel at inlet & supplied
complete with steel extension with
built-in non drip nozzle
•
High accuracy light weight gun
•
Note: Not to be used to measure
media for resale
Note: Not to be used to measure
media for resale
Flow rate
1 to 38 LPM
Flow rate
1 to 30 LPM
Inlet
½” NPT (F)
Inlet
½” BSPT (F)
Accuracy
+ / - 0.50%
Accuracy
+ / - 0.50%
Repeatability
+ / - 0.20%
Repeatability
+ / - 0.30%
Max. Working Pressure
1000 PSI (69 BAR)
Max. Working Pressure
870 PSI (60 BAR)
Working Temperature range
-5°C to 50°C
Working Temperature range
-10°C to 60°C
Max. Resettable Batch Total
99,999 units
Max. Resettable Batch Total
99,999 units
Max. Pre-Set Volume
99.9 units
Max. Non Resettable Totalizer
9,99,999 units
Max. Non Resettable Totalizer
99,999 units
Least Count /Resolution
0.001 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
Water Resistance
IP55
Art. Nr.
OM/20/OGY/RM/B
www.groz-tools.com
Box Qty.
Art. Nr.
Box Qty.
1
HEG/EP-01
1
23
OILING
EQUIPMENT
Electronic Oil Meter
Mechanical Oil Meter
•
High pressure
positive
displacement
meter suitable for
in-line and end of
line applications
•
Oval gear
mechanism
for optimum
accuracy
•
Robust
Aluminium Die
Cast construction
with protective
shroud on meter
RECOMMENDED
USE
Oils with viscosity
upto 2000 cSt,
Diesel, Biodiesel
•
High pressure positive displacement
meter suitable for in-line and end of line
applications
•
Oval gear mechanism for optimum accuracy
•
Electronic Display using two 1.5V batteries
•
Robust Aluminum Die Cast construction with
protective shroud
•
Measures
in Litres,
Quarts,
Pints &
Gallons
•
Easy
user recalibration
RECOMMENDED
USE:
Oils with viscosity
upto 5000 cSt,
Diesel, Biodiesel
Note: Not to be
used to measure
media for resale
Note: Not to be
used to measure
media for resale
Flow rate
1 to 30 LPM
Flow rate
1 to 30 LPM
Inlet / Outlet
½” BSP (F)
Inlet / Outlet
½” BSP (F)
Accuracy
+ / - 1%
Accuracy
+ / - 0.50%
Repeatability
+ / - 0.20%
Repeatability
+ / - 0.30%
Max. Working Pressure
1000 PSI (70 BAR)
Max. Working Pressure
1000 PSI (70 BAR)
Burst Pressure
3000 PSI (210 BAR)
Burst Pressure
2000 PSI (140 BAR)
Pressure Loss
10 PSI (0.7 BAR)
Pressure Loss
10 PSI (0.7 BAR)
Working Temperature range
-10°C to 60°C
Working Temperature range
-10°C to 60°C
Max. Resettable Batch Total
999.9 Litres
Max. Resettable Batch Total
99,999 units
Max. Non Resettable Totalizer
9,99,999 Litres
Max. Non Resettable Totalizer
9,99,999 units
Least Count /Resolution
0.10 Litres
Least Count /Resolution
0.001 units
Water Resistance
IP55
Water Resistance
IP55
Art. Nr.
Box Qty.
OM/10/1-2/BSP
1
Oval Gear
Mechanism
Art. Nr.
Box Qty.
OM/20/1-2/BSP
1
Oval Gear
Mechanism
Got a question?
Call us now for
all the answers!
24
+91.124.282.7734
www.groz-tools.com
WASTE OIL
HANDLING
AIR OPERATED
DOUBLE DIAPHRAGM PUMPS
•
Designed for use in applications requiring large volume transfer in
a very short time
•
Pumps can transfer contaminated media & are good at cleaning
out pits or liquids that can be a mix of several products like oil,
water etc. all mixed together
•
These pumps transfer waste oil, pump out sumps and or low areas
due to rain, clean out tanks, move yeast slurry, transfer sewage etc.
•
AODD/3-8/N is highly compact, small enough to fit in hand, yet
capable of pumping up to 26 LPM. This pump can be mounted
upright, sideways upside down & finds great application in car
washers
•
Air Inlet Pressure : 100 PSI
AODD/1-2/N
AODD/3-8/N
AODD/1-2/N
AODD/0-1/N
Construction
Polypropylene
Polypropylene
Polypropylene
& Aluminium
Pump Inlet/ Outlet
3/8" NPT (F)
1/2" NPT (F)
1" NPT (F)
Air Inlet
1/4" NPT (F)
3/8" NPT (F)
3/8" NPT (F)
Air Exhaust
1/4" NPT (F)
3/8" NPT (F)
1/2" NPT (F)
Flow rate
0 to 26 LPM
0 to 53 LPM
0 to 140 LPM
Diaphragm material
Santoprene
BUNA N
BUNA N
Valve material
Kynar
Acetal
Acetal
Max. Particle Size
2.50 mm
1.60 mm
3.00 mm
Suction Lift (Dry)
11'
15'
15'
25'
25'
40 CFM*
6.5 CFM
Suction Lift (Wet)
Air Consumption at
100 PSI
16 CFM
AODD/0-1/N
*at 80 PSI

Art. Nr.
Box Qty.
AODD/3-8/N
1
AODD/1-2/N
1
AODD/0-1/N
1
Key
AODD/3-8/N
 New
what is trust?
accuracy + precision + durablity + reliability + support + sevice with a smile
www.groz-tools.com
25
WASTE OIL
HANDLING
Waste Oil Drain gravity feed
Waste Oil Drain
•
Oil Drain with wheel mounted tank for gravity draining of motor,
engine, gearbox & differential oils, transmission & power steering
fluids etc. from all types of motor vehicles placed on auto lift or
a pit
•
Oil Drain with wheel mounted tank for gravity draining of motor,
engine, gearbox & differential oils, transmission & power steering
fluids etc. from all types of motor vehicles placed on auto lift or a
pit
•
Centrally Mounted 10 Litres capacity bowl is height adjustable &
can be optimally positioned allowing oil draining as well as other
maintenance operations
•
Centrally Mounted 10 Litres (10.50 qt.) capacity bowl is height
adjustable & can be optimally positioned allowing oil draining as
well as other maintenance operations
•
Durable all-steel design and re-inforced castors; the unit provides
a safe & affordable option for draining, transferring & evacuating
used oil
•
Bowl comes fitted with Anti Splash Screen
•
Durable all-steel design and re-enforced castors; the unit provides
a safe & affordable option for draining, transferring & evacuating
used oil
•
Designed for excellent mobility, easy bowl positioning & simple to
use gravity evacuation
•
Comes complete with a 14” (355mm) telescopic bowl with height
adjustment option
•
Tank comes fitted with Sight Gauge to check waste oil level & a
Faucet to drain out oil
•
Not for use with fuels and corrosive media
•
Designed for excellent mobility, easy bowl positioning & simple
to use pressurized evacuation
•
Comes complete with a 14” dia. telescopic bowl that can be
adjusted from 45” to 72” high
•
68 Litre tank includes a preset air regulator that allows the use of
standard compressed air upto 150 PSI
•
Tank includes a safety valve and a reinforced dispensing hose
that doubles as a sight gauge to prevent overfilling
•
Not for use with fuels and corrosive media
Tank Capacity
68 Litre
Max. Collection capacity
55 Litre
Bowl Capacity
10 Litres
Bowl inner Diameter
14”
Length of draining Hose
2 meter
Maximum Height
72”
Minimum Height
45”
Recommended Draining Pressure
8 PSI (0.5 BAR)
WOD-30G
WOD-50G
Tank Capacity
30 Litres (8 gallons)
50 Litres (13 gallons)
Bowl Capacity
10 Litres / 10.5 Quarts
10 Litres / 10.5 Quarts
Bowl Inner Diameter
14” (355 mm)
14” (355 mm)
Max. Height
55” (1400 mm)
63-1/2” (1613 mm)
Min. Height
40” (1016mm)
40” (1016 mm)
Telescopic,
10 litre
capacity bowl
Used Oil being drained
from vehicle in an
automotive workshop
Sight
Gauge
Art. Nr.
Box Qty.
WOD/68
1
26
Faucet
Bowl fitted with AntiSplash Screen
Art. Nr.
Box Qty.
WOD/30G
1
WOD/50G
1
www.groz-tools.com
FUEL
EQUIPMENT
HEAVY DUTY ELECTRIC FUEL PUMPS
•
Heavy Duty Industrial Greade
Fuel Pumps designed for
every day use in Agriculture,
Construction, Automotive &
Industrial applications
•
Rain & weather proof for tough
outdoor use
•
Lightweight, yet strong non
corroding Aluminum Die Cast
Construction
•
Geared Pump design using
precision sintered metal gears
•
Geared Construction makes the
pump tolerant to contaminants
in fuel, in addition to offering
tremendous suction & minimal
noise
•
cUL, ATEX & IECEx listed Motor
•
Duty Cycle: 30 minutes on / 30
minutes off
•
Select models available wiht
meter & filter also
Nozzle Hangar for safe storage of nozzle when not in use
Manual
Fuel Control
Nozzle with
Built-in
Swivel
FM-10/0-1/BSP
FFL-02B
Spin Collar
for easy
installation
ON/OFF
Switch
Wire Mesh Strainer
designed for easy
cleaning without
pump disassembly
Provision to
Pad Lock
12’ x 3/4’
Anti Static
Rubber Hose
2 pc threaded
suction tube
34” (864 mm)
long
RECOMMENDED USE: Gasoline,
Diesel, E-15 Fuel, Kerosene, Bio
Diesel (B20)
FPM-12/FMT
FLOW RATE
Upto 57 LPM*
*Measured at pump outlet with
Vehicle Engine switched on
Art. Nr.
Description
Box Qty.
FPM-12
Pump Assembly
1
FPM-12/MT
Pump Assembly with Digital
Meter FM-10/0-1/BSP (pg. 34)
1
FPM-12
FPM-24
Description
Heavy Duty 12V DC
Heavy Duty 24V DC
Heavy Duty 220V AC
FPM-220
Flow Rate
(at pump outlet)
Upto 57 LPM*
Upto 57 LPM*
Upto 49 LPM*
Explosion Proof Motor
1/7 HP 12V DC
1/7 HP 24V DC
1/8 HP 230V AC , 50/60 Hz.
Amp
12 Amp
6 Amp
1 Amp
Internal bypass valve
Yes
Yes
Yes
Suction Pipe
Steel
Steel
Steel
Hose
3/4" x 12'
Anti Static Hose
3/4" x 12'
Anti Static Hose
3/4" x 12'
Anti Static Hose
Tank Adapter
2" Threaded
2" Threaded
2" Threaded
Inlet
1" NPT
1" NPT
1" NPT
FPM-12/FMT
Pump Assembly with Digital
Meter (FM-10/0-1/BSP) & Filter
FFL-02B (pg. 38)
1
Outlet
3/4" NPT
3/4" NPT
3/4" NPT
FPM-24
Pump Assembly
1
Dispensing
Nozzle
3/4" Manual
with Swivel
3/4" Manual
with Swivel
3/4" Manual
with Swivel
FPM-220
Pump Assembly
1
Battery Cable (2 Wire)
15'
15'
NA
www.groz-tools.com
27
FUEL
EQUIPMENT
HEAVY DUTY high flow ELECTRIC FUEL PUMPS
•
Heavy Duty Industrial Grade High
Flow Fuel pump designed for
heavy duty usage in Agricultural,
Construction, Automotive &
Industrial applications
•
Rain & Weather proof for tough
outdoor use
•
Lightweight yet strong, non
corroding Aluminum Die cast
construction
•
Geared pump design using
precision sintered metal gears
•
Geared construction makes the
pump tolerant to contaminants
in fuel; in addition to offering
tremendous suction & minimal
noise
•
cUL, ATEX & IECEx listed Motor
•
Duty Cycle: 30 Minutes On / 30
Minutes Off
Nozzle Hangar for
safe storage of nozzle
when not in use
Manual
Fuel
Control
Nozzle
with Builtin Swivel
Wire Mesh
Strainer
designed for
easy cleaning
without pump
disassembley
Spin Collar
for easy
installation
ON/OFF
Switch
Provision to
Pad Lock
RECOMMENDED USE
Gasoline, Diesel, E15 Fuel, Kerosene,
Bio Diesel (B20)
12’ x 1” Anti
Static Rubber
Hose
2 pc threaded
suction tube
34” (864 mm)
long
FLOW RATE
Upto 75 LPM*
*Measured at pump outlet with
Vehicle Engine switched on
Art. Nr.
28
Description
FPM-12/HF
Pump Assembly
FPM-12/HF/MT
Pump Assembly with Digital
Meter FM-10/0-1/BSP (pg. 34)
FPM-12/HF/FMT
Pump Assembly with Digital
Meter (FM-10/0-1/BSP) & Filter
FFL-02B (pg. 38)
FPM-12/HF
Box Qty.
1
1
1
Description
Heavy Duty 12V DC
Flow Rate*
Upto 20 GPM (75 LPM)
Explosion Proof Motor
1/7 HP 12V DC
Amp draw from Battery
15 Amp
Internal bypass valve
Yes
Suction Pipe
Steel
Hose
1" x 12' Anti Static Hose
Tank Adapter
2" Threaded
Inlet
1" NPT
Outlet
1" NPT
Dispensing Nozzle
1" Manual with Swivel
Battery Cable (2 Wire)
15'
www.groz-tools.com
Electric Fuel & Oil PumpS
•
Vertical mount Fuel & Oil pump designed
for use in light Industrial, Automotive,
Heating & Marine applications
•
For use with non flammable media
•
Pumps have built in Bung Adapter to fit
directly onto drums with a 2” threaded
opening
•
Manufactured from chemically inert
materials; these pumps work with a wide
variety of low viscosity media. Pump
motor has double insulation which
makes them safe for use with water &
emulsions
•
Built-In Anti Siphoning system ensures
that media does not flow out by Siphon
action incase of accidental damage to
the delivery hose or dispensing nozzle
•
Duty Cycle: Continuous Duty
•
RECOMMENDED USE: Diesel, Kerosene,
Mineral & Synthetic Oils, Heating Oils,
Antifreeze, Water, Emulsions etc.
Art. Nr.
EOP/DC/12
EOP/DC/24
EOP/AC/230
Description
12V DC
24V DC
230V AC
Flow rate*
Upto 35 LPM
Upto 35 LPM
Upto 40 LPM
Motor
0.43 HP
Centrifugal Motor
0.43 HP
Centrifugal Motor
0.43 HP
Centrifugal Motor
Amp draw from battery
9.2 Amp
5.6 Amp
1 Amp
Absorbed Power
110W
135W
224W
Discharge Head
1 meter
1 meter
1 meter
Suction Pipe
3/4" ID x 1m long
3/4" ID x 1m long
3/4" ID x 1m long
Delivery Hose
3/4" ID x 3m long
3/4" ID x 3m long
3/4" ID x 3m long
Tank Adaptor
2" & M64x4
2" & M64x4
2" & M64x4
Inlet / Outlet
3/4" Hose Barb
3/4" Hose Barb
3/4" Hose Barb
Dispensing
Nozzle
Manual
Polypropylene Nozzle
with 3/4" Hose Barb
Manual
Polypropylene Nozzle
with 3/4" Hose Barb
Manual
Polypropylene Nozzle
with 3/4" Hose Barb
Battery /
Power cable
3m long with
battery clamps
3m long with
battery clamps
2m long
with plug
Water / Dust
Protection
IPX-4
(protection against
splashing water)
IPX-4
(protection against
splashing water)
IPX-4
(protection against
splashing water)
Noise Level
70 db
70 db
70 db
Working Temperature range
-10°C to +40°C
-10°C to +40°C
-10°C to +40°C
CE
Yes
Yes
Yes
Use with Petrol & other
Flammable Fuels
No
* measured at pump outlet tested using Diesel at 20°C
www.groz-tools.com
No
No
Pump
installed
on drum
Art. Nr.
Description
Box Qty.
EOP/DC/12
12V DC
1
EOP/DC/24
24V DC
1
EOP/AC/230
230V AC
1
29
FUEL
EQUIPMENT
Electric DIESEL PumpS
Manual
Nozzle
Strainer
EDP/12M/ST
•
Portable Diesel transfer pumps designed for
everyday use in Agricultural, Construction,
Automotive & Industrial applications
Flow Rate (at pump outlet)
Upto 12 GPM (46 LPM)
Upto 12 GPM (46 LPM)
•
Lightweight, yet strong non corroding Aluminum
Die Cast Construction
Motor
1/4 HP 12V DC
1/4 HP 24V DC
RPM
2600
2600
•
Self priming Vane pump design
Amp draw from Battery
16 Amp
9 Amp
•
Duty Cycle: 30 Minutes On / 30 Minutes Off
Internal bypass valve
Yes
Yes
•
Available in a choice of 12V or 24V
Outlet
3/4" NPT
3/4" NPT
•
Includes pump with base plate & lift handle.
Battery Cable
2 metre
2 metre
•
Pump inlet & outlet threaded ¾” (F).
Duty Cycle
30 mins. On / 30 mins Off
30 mins. On / 30 mins Off
•
Supplied complete with 4m x ¾” ID hose that
can be cut into two parts for use as a suction &
delivery hose.
•
Includes strainer & 2m long battery cable with
fuse & clamps, Aluminum nozzle for controlling
fuel delivery. Hardware supplied includes 3 hose
barbs (3/4”) & 4 hose clamps
12V DC
Upto 46 LPM
RECOMMENDED USE
Diesel & Kerosene
Art. Nr.
30
Description
Box Qty.
EDP/12M/ST
Pump Assembly with Manual Nozzle
1
EDP/24M/ST
Pump Assembly with Manual Nozzle
1
24V DC
DO NOT USE
Fluids with a flash point below
100°F (38°C), such as Gasoline &
Alcohol
Sparking could result in
explosion causing fatal injury
www.groz-tools.com
INDUSTRIAL ROTARY FUEL PUMPS
•
Discharge Spout
Industry Standard for Rotary pumps, these are by far the
heaviest duty, for severe outdoor use in extreme weather
conditions
•
Delivers media with a head / lift upto 20’ (6 metres)
•
Solid cast iron construction, fully CNC machined to close
tolerances
•
Pump Handle rotates a high quality sintered powder metal 3
Vane Rotor inside a highly finished pumping chamber
•
Graphite Veins are self lubricating & non wearing
•
High Quality graphite Seal allows the pump to be used
with a wide variety of fluids
•
Self Priming operation with discharge up to 38 LPM
•
For use with 50 - 210 litre barrels
•
Do Not Use With: Water Based Media
•
Available in a Choice of 2 Configurations:
Nozzle Holder
Crank
Grip
2” Bung
RBP/3V: Pump with Steel Discharge Spout for use with
Petroleum based fluids, Petrol, Diesel & Kerosene. Ideal for use
with Barrels, drums & tanks for transferring media into smaller
containers
RBP/3V/H: Pump with 8’ Antistatic Hose, Nozzle & Nozzle Holder
for use with Petroleum based fluids, Petrol, Diesel & Kerosene.
Ideal for use with Barrels, Drums & tanks for quickly refuelling
Petrol/Diesel powered vehicles or equipment
Art. Nr.
Discharge Spout & Accessories
Box Qty.
RBP/3V
Steel
1
RBP/3V/H
8’ anti-static hose, non-sparking
aluminium nozzle & nozzle holder
1
Geared Hand Operated 3:1 Rotary Barrel Pump
•
Aluminium die cast pump with sintered gear driven
die cast rotor & vanes
•
Ideal for use where volume fuel dispensing is needed construction sites, workshops, farms, aviation etc.
•
Suitable for 50-210 litre drums
•
Recommended for use with: Petrol, Diesel, Kerosene
& Oils upto SAE 30
Upto 500 ml / rotation
Art. Nr.
Box Qty.
RB/3H
1
www.groz-tools.com
Empties a
210 L drum
in 3 minutes
8’ x 3/4”
Anti static
Fuel Hose
Telescopic
Sution Tube
RBP/3V
RBP/3V/H
Upto 38 litres / minute
1.8 m
discharge
hose with
metal nozzle,
spring and
hose clamp
ROTARY BOOSTER PUMP 3:1
•
Non
Sparking
Aluminum
Nozzle
“Built-in”
nozzle
holder
Aluminum
die cast
handle
with
security
locking
latch
2” cast
iron
bung
adaptor
31
FUEL
EQUIPMENT
DOUBLE ACTION DIAPHRAGM
FUEL TRANSFER PUMP
Rapidflo™ rotary
fuel transfer pump
•
Highly durable, high quality impellor
pump incorporating a gearbox for high
output and easy operation
•
Double Diaphragm Hand Operated Fuel Transfer Pump
•
Ideal for use on construction sites, farms, boats etc.
•
Pumps easily in both directions
•
Suitable for 50 - 210 litre drums
•
In built strainer
•
Recommended for use with: Petrol, Diesel, Kerosene, Motor oil etc
•
Ideal for rapid transfer of fuels on
construction sites, aviation etc.
•
Suitable for 50 - 210 Litre Drums
•
Pumps diesel, petrol, kerosene and
lubricating oil upto SAE 30
•
•
Available in 2 forms: Pump only, Pump
complete with Mechanical Diesel Meter
(DM100) for measuring fuel delivery
•
•
Empties
a 210 L
drum in 2
minutes
Upto 800 ml / rotation
•
Note that Fuels containing
Ethanol will cause more frequent
replacement of rubber parts
Do not use with Fuels with
Ethanol content greater than
10%
Never operate the pump near fire
or source of spark. Some media
may be explosive & dangerous
to pump
Pump is designed primarily for
use with low viscosity media.
Pumping heavy fluids may cause
undue stress resulting in fracture
Upto 800 ml / stroke
“Built-in”
nozzle
holder
2” bung
adaptor
“Built-in”
Nozzle holder
Aluminum
die cast
handle
with
security
locking
latch
Security Locking Latch
Stainless steel piston
2.4 m
rubber
delivery
hose &
nozzle
Heavy
Duty
Aluminum
Die Cast
Construction
Art. Nr.
GP-01
32
Description
Pump Only
2” die cast
bung adaptor
Box Qty.
Art. Nr.
Box Qty.
1
DPP/1
1
Discharge
through 8’
of anti-static
neoprene
rubber hose
with die cast
nozzle
www.groz-tools.com
f meter - high accuracy
mechanical fuel meter
Re-Set
Knob
Non Resettable
Totalizer
Resettable
Batch Totalizer
•
Worlclass Mechanical Fuel Meter, extremely compact,
yet easy to read
•
Robust Aluminum Die Construction
•
3 Port Design which allow the meter to be fitted In –
Line or with the Inlet & outlet ports at Right Angle
•
Nutating Disc Mechanism offers high tolerance to fuel
contamination
•
For use with Electric Fuel Pumps or gravity flow (with a
minimum gravity head of 4’)
•
Register cap can be easily removed & rotated to every
90° orientation for display reading
•
Easy user re calibration
•
Works with both Fuels & Oils
•
Available in Litre/Gallon version in a choice of ¾” or 1”
threads
105 mm
150 mm
135 mm
RECOMMENDED USE: Diesel, Gasoline, Biodiesel,
Low to Medium Viscosity Oils
DO NOT USE WITH: Water based media
Accuracy
+/- 1%
Repeatability
+/- 0.50%
Max. Resettable Batch Total
9999 Litres
Max. Working Pressure
50 PSI (3.5 BAR)
Max. Non Resettable Totalizer
999999 Litres
Least Count / Resolution
0.10 Litres or 0.10 Gallons
Meter Dimensions
5-5/16” (135 mm) Wide
4-1/8” (105 mm) Tall
6” (150 mm) Deep
In Line
Outlet
Port
Inlet
Port
Right Angle
Outlet Port
Note: Not to be used to measure media for resale
VERSATILE MOUNTING OPTIONS
In Line Mounting
FLOW RATE
Nutating Disk Mechanism
Mounting at 90°
OUT
IN
OUT
15 to 75 LPM
IN
Working Temperature Range
-10°C to 65°C
Art. Nr.
Measurement
Threads
Box Qty.
FM-100/3-4/BSP
Litres
3/4” BSP (F)
1
FM-100/0-1/BSP
Litres
1” BSP (F)
1
www.groz-tools.com
33
FUEL
EQUIPMENT
MECHANICAL OVAL GEAR FUEL METER
Mechanical Nutating Disc
Fuel Meter
•
High Accuracy Flow
meter with Mechanical
register
•
Nutating Disc mechanism
offers high tolerance to
fuel contamination
•
Meter is designed for
both In-Line applications
& gravity flow (with a
minimum gravity head
of 4’)
•
High Accuracy Flow meter with Mechanical register
•
Oval Gear mechanism allows use of meter with flow
rates as low as 3 LPM
•
Meter is designed for both In-Line applications & gravity
flow (with a minimum gravity head of 4’)
•
Ideal for use with Electric
Fuel pumps
•
Ideal for use with Electric Fuel pumps
•
•
Register cap can be easily removed & rotated to every 90°
orientation for display reading
•
Supplied with integrated mesh strainer
Register cap can be easily
removed & rotated to
every 90° orientation for
display reading
•
Robust Aluminium Die Cast construction
•
Robust Aluminium Die
Cast construction
•
Easy user re calibration
RECOMMENDED USE: Diesel & Kerosene
FM-10 Meter fitted to a 12V ELectric Fuel Pump
RECOMMENDED USE: Diesel, Biodiesel,
Oils with viscosity upto 2000 cSt
DO NOT USE WITH: Petrol, Water based
media
6 Digit
Accumulative
Totalizer (max.
999,999 litres)
4 Digit ReSettable Batch
Totaliser max.
999.9 litres)
Flow rate
3 to 80 LPM
Inlet / Outlet
1” BSP (F)
Inlet / Outlet
1” BSP (F)
Accuracy
+ / - 1%
Accuracy
+ / - 1%
Repeatability
+ / - 0.30%
Repeatability
+ / - 0.30%
Max. Working Pressure
145 PSI (10 BAR)
Max. Working Pressure
145 PSI (10 BAR)
Max. Resettable Batch Total
999 Litres
Max. Resettable Batch Total
999.9 Litres
Max. Non Resettable Totalizer
9,99,999 Litres
Max. Non Resettable Totalizer
9,99,999 Litres
Least Count /Resolution
0.10 Litres
Least Count /Resolution
0.10 Litres
Note: Not to be used to measure media for resale
Note: Not to be used to measure media for resale
FLOW RATE
FLOW RATE
20-120 LPM
3-80 LPM
Nutating Disk Mechanism
Art. Nr.
Art. Nr.
Box Qty.
MFM/DM100/BSP
1
34
Oval Gear
Mechanism
Box Qty.
FM/10/0-1/BSP
1
FM/100/3-4
1
FM/100/0-1/BSP
1
www.groz-tools.com
IN-LINE FLOW METER
•
Heavy Duty High Accuracy Flow meter with Mechanical register
•
Oval Gear mechanism
•
Meter is designed for both In-Line applications & gravity flow (with a
minimum gravity head of 4’)
•
Flexibility of installation options (e.g. can be mounted horizontally or
vertically; no flow conditioning required)
•
Digital Turbine meter for low viscosity fluids, easy to install in line
or for end of the line applications
•
Meter construction enables fast and easy on-site servicing without
removal from application
•
Polypropylene Turbine measuring mechanism
•
Electronic Display using two AAA 1.5V batteries
•
Polyamide body and sealed electronic card make it suitable for
use in severe weather conditions
•
Display can be rotated in 4 different positions
•
Measures in Litres, Quarts, Pints & Gallons
•
Easy user re calibration
•
Includes one additional stainless steel adaptor to convert from 1”
male to 1” female threads
•
Handles wide varieties of media from Fuels to high viscosity oils
upto SAE 140
•
Robust Aluminium Cast construction
•
Meter accuracy is verified by a factory calibration check after
which an individual metrology report is issued.
6 Digit
Accumulative
Totalizer (max.
999,999 litres)
Digital Fuel Meter
RECOMMENDED USE : Diesel, Petrol, Bio Diesel, Windshield Fluid, Water
DO NOT USE WITH: Oils
4 Digit Re-Settable
Batch Totaliser
max. 999.9 litres)
Inlet / Outlet
1” (F)
Flow rate
6 to 120 LPM
Flow rate
5 to 120 LPM
Inlet / Outlet
1” BSP (F)
Inlet / Outlet
1”
Accuracy
+ / - 1%
Accuracy
+/-1%
Repeatability
+ / - 0.03%
Repeatability
+ / - 0.30%
Max. Working Pressure
500 PSI (35 BAR)
Max. Working Pressure
300 PSI (20 BAR)
Max. Resettable Batch Total
999.9 Litres
Max. Resettable Batch Total
99,999 units
Max. Non Resettable Totalizer
9,99,999 Litres
Max. Non Resettable Totalizer
9,99,999 units
Least Count /Resolution
0.10 Litres
Least Count /Resolution
0.001 units
Water Resistance
IP55
Note: Not to be used to measure media for resale
Note: Not to be used to measure media for resale
FLOW RATE
6-120 LPM
Art. Nr.
Box Qty.
MFM/M10/BSP
1
www.groz-tools.com
Oval Gear
Mechanism
Art. Nr.
Box Qty.
FM/20/0-1/BSP
1
FLOW RATE
5-120 LPM
35
FUEL
EQUIPMENT
FUEL CONTROL NOZZLES – MANUAL
•
For use with Fuel Pumps &
gravity feed applications
•
Manual control
•
All Metal Construction with
the Body, Discharge Spout,
Trigger & Guard made from
Aluminium
•
Hose Swivel at Inlet
•
For use with Diesel, Kerosene
& Petrol
Art. Nr.
Maximum Pressure
150 PSI (10 (BAR)
Spout Type
Inlet Thread
Spout Dia. (OD)
Max. Flow Rate
Box Qty.
FCN/S/3-4/3-4/N
Straight
FCN/S/0-1/0-1/N
Straight
3/4” NPT (F)
19 mm
57 LPM
1
1” NPT (F)
25 mm
75 LPM
1
Fuel Control Nozzles – Automatic
•
For Use with Electric
Fuel Pumps
•
Dual Mode: Manual
& Automatic.
Sensor built into
the discharge spout
outlet automatically
shuts off supply once
fuel level in the tank
reaches that of the
outlet discharge
spout
•
Maximum Pressure
50 PSI (3.45 (BAR)
Heavy Duty Die Cast
Aluminium Body,
Trigger & Guard from
Thermoplastic &
protective vinyl grip
on the nozzle body
RECOMMENDED USE:
Diesel, Kerosene &
Petrol
Art. Nr.
Spout Type
FCNA/3-4/N
Straight
FCNA/0-1/N
Curved
with Spring
36
Inlet Thread
Spout Dia. (OD)
Max. Flow Rate
Box Qty.
3/4” NPT (F)
21 mm
57 LPM
1
1” NPT (F)
27 mm
110 LPM
1
www.groz-tools.com
Fuel Control Nozzles - Metered
•
Manual Fuel Control Nozzle fitted with Digital Fuel
Meter
•
Nozzle with Die cast Aluminium Construction with
built in Swivel at inlet
•
Polypropylene Turbine measuring mechanism
•
Electronic Display using two AAA 1.5V batteries
•
Polyamide meter body and sealed electronic card
makes it suitable for use in severe weather conditions
•
Measures in Litres, Quarts, Pints & Gallons
•
Easy user re calibration
Fuel DISPENSING kit
Gravity feed Fuel
Dispensing Kit
comprising 3m
Anti Static Rubber
Hose, fitted with
Manual Fuel
Control Nozzle with
Swivel
RECOMMENDED USE : Diesel & Petrol
DO NOT USE WITH: Oils
Inlet
¾” (F) or 1” (F)
Accuracy
+/-1%
Repeatability
+ / - 0.30%
Max. Working Pressure
150 PSI (10 BAR)
Max. Resettable Batch Total
99999 units
Max. Non Resettable Totalizer
999999 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
Note: Not
to be used
to measure
media for
resale
Hose Diameter
Inlet Threads
Box Qty.
FDK/3/3-4/N
Art. Nr.
3/4”
3/4” NPT (M)
1
FDK/3/0-1/N
1”
1" NPT (M)
1
Fuel HOSE
12’ (72”) long Replacement Anti Static Fuel Hose complete with end
connections
FLOW RATE
5-120 LPM
Inlet Thread
FM/20/FCN/3-4/N
3/4” NPT (F)
19 mm
1
ZSA/HOS/FPM/12
FM/20/FCN/0-1/N
1" NPT (F)
25 mm
1
ZSA/HOS/FPM/12/HF
www.groz-tools.com
Spout Dia. (OD)
Box Qty.
Art. Nr.
Art. Nr.
Hose Diameter
Inlet Threads
Box Qty.
3/4”
3/4” NPT (F)
1
1”
1” NPT (F)
1
37
FUEL
EQUIPMENT
HIGH FLOW 10 MICRON FUEL FILTER
FILTER WRENCH
•
•
•
•
Easy to use
Filter Wrench for
removing Filter
Bowl when
changing Filter
element
Weather
Resistant reinforced Nylon
construction
won’t damage
the bowl like
metal oil filter
wrenches
•
Polypropylene bowl with
Aluminium head and 10
micron Filter Element
•
Suitable for use with manual
or Electric Fuel Pumps
•
Filters small particles of rust,
scale, grit, dirt and sand
•
Replacement filter element
available as spare
•
Water block filter element
used to separate water from
fuel is also available as spare
Replacement Filter
Element
RECOMMENDED USE : Diesel &
Petrol
Specially
designed to fit
Groz fuel filter
bowl.
DO NOT USE: Gasohol , Aviation
Fuels, Race Fuels, water based
products
Fits fuel filter bowl for easy
removal without cracking!
Wire through
hole provided
for attaching to
fuel tank
Aluminium Die
Cast Filter Head threaded 1” at inlet
& outlet
Translucent
Polypropylene
Filter Bowl allows for a quick
visual check of the
filter element &
permits removal
of sediment &
water
Brass Drain
Cock - releases
accumulated
water &
contaminants by
a simple turn
wire
through
hole
38
Art. Nr.
Box Qty.
FW/FFL-02
10
Art. Nr.
Details
Box Qty.
FFL-02/B
Fuel Filter. Threaded 1” BSP (F)
10
FFL-02/N
Fuel Filter. Threaded 1” NPT (F)
10
FF/FFL/10
Fuel Filter Element - 10 MICRONS
10
FF/FFL/10-WB
Water Block Fuel filter element
10
www.groz-tools.com
fuel filter spin on cartridge style
•
High Flow Fuel Filter, complete with 10
micron Spin-On style filter cartridge
•
Aluminum Die Cast Head, vacuum
impregnated for leakproof operation
•
Inlet & Outlet threaded 1” (F)
•
Fits spin on cartridges with 1-1/2”-16 UNF
threads
•
Designed for use on both mobile &
stationary fuel tanks and on gasoline &
diesel fuel pumps
•
Ideal for use in construction & agricultural
applications
•
Removes particulate contaminants such
as dirt, dust & rust
•
Replacement Spin-On Filter cartridges
available as spare
Aluminum die
cast filter head
threaded 1” at
the inlet
Aluminum die
cast filter head
threaded 1” at
the outlet
Spin-On Filter
Cartridge
RECOMMENDED USE: Gasoline, Diesel Fuel
DO NOT USE: With water based products,
Aviation, Fuels, Race Fuels etc.
Mounting Holes
5/16"-18 BSW
Max. Working Pressure
50 PSI (3.45 BAR)
FF/FFS/10
FLOW RATE
Max. Flow: 75 LPM
Art. Nr.
FILTER ELEMENT
INLET / OUTLET
Box Qty.
FFS/10/BSP
10 µ Filter
1” BSP (F)
10
FFS/10WB/BSP
10 µ Filter Water Block
1” BSP (F)
10
1-1/2”-16 UNF
Threads
REPLACEMENT CARTRIDGE
FF/FFS/10
10 µ Filter
10
FF/FFS/10-WB
10 µ Filter Water Block
10
www.groz-tools.com
39
SPECIALITY
PUMPS
PLASTIC LEVER PUMP
•
Designed for effortless pumping of thick fluids
•
Suitable for 50 - 210 litre drums
ROTARY CHEMICAL PUMP
•
Body made from glass filled
Polypropylene with Ryton veins
•
Viton rubber seals & stainless steel
hardware
•
Suitable for 50-210 litre drums
WETTED COMPONENTS:
Polypropylene, Ryton, Viton &
Stainless Steel
WETTED COMPONENTS:
Polyacetal, Polypropylene,
Polyethylene & Viton
Anti
Siphon
Vent
Cap
Built-in
Lock Nut
2” Bung
Adaptor
RECOMMENDED
FOR USE WITH:
Water based media,
Detergents, Soaps,
Antifreeze, Windshield
Washer, Hydraulic oils,
Lubricants, Agricultural
chemicals, Herbicides &
Pesticides
RECOMMENDED FOR USE WITH:
Water based media, acids, chemicals
& all petroleum based fluids
Complete
with 2 m
Corrugated
hose
Do not use with Acetone,
Lacquer, Mineral Oils,
Solvents, Turpentine etc.
250 ml / rotation
Art. Nr.
Box Qty.
Art. Nr.
Box Qty.
PRP/01
1
PLP/02
1
DIAPHRAGM /
BILGE PUMP
•
Hand operated Diaphragm
Pump designed to work
in any position - vertical,
horizontal or even upside
down
•
Pump can be mounted
anywhere - on a wall,
wooden base or on a drum
•
Made from Acetal, PU,
Stainless Steel & PVC
- the pump is virtually
maintenance free
RECOMMENDED USE:
Water, Sea Water, Diesel, Kerosene,
Gasoline, Mineral Oils, Heating Oils,
Synthetic Oils & Engine Oil
40
Upto 500 ml / stroke
Art. Nr.
Box Qty.
DPP/20
1
Comes complete with
a. Pump Body
b. Drum Attachment
c. Suction Hose
1.25 m x 3/4” ID
d. Discharge Hose 2.0m x 1” ID
e. Hose for Drum Attachment
f. Delivery Nozzle
g. Stainless Steel Strainer
h.Screws
i. Hose clamps
Upto 16.6 litres / minute
www.groz-tools.com
POLYETHYLENE
SIPHON PUMPS
NYLON CHEMICAL PUMP
•
Self priming Vertical Lift Pump
•
Nylon construction with Stainless Steel plunger rod &
PTFE seals
•
Suitable for use on 50-210 litre drums
•
Pumps media
from higher to
lower level by
Siphon Action
•
Vent Cap can
be opened to
stop siphon
action
•
For use with
media at
temperature
under 60°C
•
Pumps Water
Based Fluids,
Waxes,
Detergents,
Soaps & other
light weight
media
WETTED COMPONENTS:
Nylon, Polypropylene, Stainless
Steel & PTFE
RECOMMENDED FOR USE
WITH: Lacquer, Acetone,
Detergents, Glycerine, Water,
Weed Killer etc.
Do not use with strong
Acids, Bleach & Petrol
Upto 400 ml / stroke
Art. Nr.
Vent
Cap
Vent
Cap
Vent
Cap
SPH/1
Discharge
SPH/2
Bung
SPH/3
Fits
Box Qty.
SPH/1
6.5 litres/min
1.1/2” for use with pails
5-20 litre pails
24
Art. Nr.
Box Qty.
SPH/2
17.5 litres/min
2” for use with drums
210 litre drums
24
CMP/12
1
SPH/3
21 litres/min
2” for use with drums
210 litre drums
24
HOSE
REELS
Retracta®
auto rewind hose reels
•
The #1 Selling Auto Rewind Hose reel with features
unmatched by any in the Industry
•
Safe storage system that keeps hoses off the floor, thus
reducing costly hose wear, avoiding accidents & keeping
workplace organized
•
Made from weather resistant, high impact UV stabilized
Polypropylene
•
Positive Locking Mechanism allows mounting in any
position: on the wall, roof, shelf etc.
•
Low rewind tension allows easy hose pull out
•
Stainless Steel mouth for improved hose & reel service life
•
Includes Lift Handle, Mounting Bracket that enables 180°
rotation
•
Supplied complete with hose
•
Available in 3 types for use with Air/Water (upto a max.
working temp. of 60°C), Oil and Grease
Art. Nr.
OMP2101
Oil Hose Reel
Hose Material: Reinforced Rubber (SAE R1)
Working Pressure: 1000 PSI
AW2101
Air/Water Hose Reel
Hose Material: Reinforced PVC
Working Pressure: 250 PSI
Description
Hose Length
Hose I.D.
Reel Inlet
Hose Outlet
Box Qty.
AW2101
Compressed Air / Water
20 m
10 mm
3/8" BSP (F)
1/4" BSPT (M)
1
OMP2101
Medium Pressure Oil
10 m
10 mm
3/8" BSP (F)
1/2" NPT (M)
1
GR2061
Grease
10 m
6 mm
1/4" BSP (F)
1/4" BSPT (M)
1
GR2061
Grease Hose Reel
Hose Material: Reinforced Rubber (SAE R2)
Working Pressure: 5000 PSI
41
DRUM
HANDLING
Low Profile Drum Trolley
•
•
Manufactured
from solid 5mm steel
sheet with loading upto
545 kgs
DRUM CRADLE
•
Tips, rotates, moves & stores 180kg
/ 210 litre drums
•
Equipped with Self
Storing Lever
Bar
•
63mm
dia. non
sparking
wheels for
use on rough
flooring
•
Art. Nr.
Box Qty.
1
DRUM DOLLY
•
•
•
Comes complete with 2
Phenolic front wheels &
1 swivelling back wheel
•
Holds drums of dia 26”
(660mm)
Max. load 272 kgs
DRC/135
Extra Heavy
Duty drum dolly
for convenient
movement of 180
kg/ 210 litre drums
Manufactured from
solid 3mm steel
sheet
•
Premium powder
coated finish
•
Solid Cast iron
wheels - 4 (75mm
dia x 35mm wide)
•
Holds drums of dia
23” ( 584mm)
Art. Nr.
Box Qty.
BDL/140S
2
Designed for convenient
movement of 180 kg /
210 litre drums in shop
floors
Art. Nr.
Box Qty.
TRL/55
2
Trolley for Portable Oil /
Grease Systems
•
Stable design with two
front and one back
wheel
•
Convenient push
mechanism to move the
trolley/ drum
•
Designed for convenient
movement of drums
upto 205 litres (180 kgs)
•
Ideal for use in portable
oil and grease systems
Art. Nr.
Box Qty.
TRL/210
1
DRUM WRENCH
•
Easy & convenient tool to open almost all
Drums
•
Wrench fits perfectly onto 2” & 3/4” Drum
Plugs
•
Manufactured from Cast Aluminum,
Hardened & tempered
•
Non Sparking
42
Art. Nr.
Box Qty.
DRW/AL-01
10
www.groz-tools.com
AIR LINE
ACCESSORIES
Air Line Hose
•
Air Line Hose, 8 mm O.D.
•
Working Pressure: 10 BAR
FILTER REGULATOR COMBINATION
•
Compact Combination unit for
removing contaminants & moisture from
compressed air in addition to regulating
air pressure
•
Regulator has a Non raising “Press to
Lock” adjusting knob for locking at any
set pressure
•
Filter is designed with a Separator &
Shield for efficient moisture separation.
Maximum
Flow Rate
20 CFM
(550 LPM)
Pressure
Adjustment
Range
7 to 145 PSI
(0.5 to 10 BAR)
Filtering
Element
Sintered Bronze
(40 micron)
Drain
Type
Semi
Automatic
1/4”
Bowl
Guard
•
Maximum Pressure
145 PSI (10 BAR)
Art. Nr.
Description
Inlet/ Outlet
Port Size
Pressure Gauge Port
Size
Box Qty.
FRC136134-S/GB
Miniature
¼” BSP
1/8” BSP
1
FRC139134-S/GB
Miniature
¼” NPT
1/8” NPT
1
Supplied complete
with pressure gauge &
mounting bracket
•
•
1.5 m
Box Qty.
10
AH/5/1-4/BU
5m
10
ONE TOUCH
AIR LINE FITTING
•
Convert 1/4” threaded Air Inlet on
Groz pumps into quick connect
fittings for connecting air line to
the pump
•
Threaded 1/4” BSPT (M)
•
For use with Air line hose with
8 mm O.D.
Oil Drop
Indicator
Space saving 2 pc
Modular Filter-Regulator
combination & Lbricator
Filter removes
contaminants &
moisture from
compressed air
Hose Length
Semi
Automatic
Drain
Filter-Regulator
& Lubricator - 2 pc
•
Art. Nr.
AH/1.5/1-4/BU
Oil Filling
Plug
Art. Nr.
Box Qty.
WP2110851
20
1/4”
Regulator has a Non
raising “Press to Lock”
adjusting knob for
locking at any set
pressure
Lubricator feeds
lubricants to air
operated equipment
maintaining a constant
oil-to-air density over a
wide range of flow
Supplied
complete
with pressure
gauge &
mounting
bracket
Semi
Automatic
Drain
Art. Nr.
Description
Inlet/Outlet
Port Size
Pressure Gauge
Port Size
Box Qty.
FRCLM136134-S/G
Miniature
¼” BSP
1/8” BSP
1
FRCLM139134-S/G
Miniature
¼” NPT
1/8” NPT
1
Maximum Pressure
145 PSI (10 BAR)
Minimum
Flow Rate
0.42 CFM
(12 LPM)
Maximum
Flow Rate
18 CFM
(500 LPM)
Pressure
Adjustment
Range
7 to 145 PSI
(0.5 to 10 BAR)
Filtering
Element
Sintered Bronze
(40 micron)
Drain
Type
Semi
Automatic
43
AIR BLOW
GUNS
/2
4.1
AIR BLOW GUN PROFESSIONAL
High Quality, Industrial use Air Blow
gun with gun body made from
Polyacetal (POM)
•
Non Corroding Aluminum nozzle
•
4-1/2” (114 mm) long nozzle to access
hard to reach areas
•
Ergonomic gun design for extended
use without fatigue
•
Brass threaded Air Inlet ensures that
threads do not shear with repeated use
•
Variable Speed Trigger for full control
of amount of air dispensed
•
Silent operation
•
Confirms to OSHA STD 1-13.1 for safety
POM
Body
Operating Pressure:
50 PSI - 150 PSI
(3.5 BAR - 10 BAR)
Variable
Speed
Trigger
Box Qty.
ABG/30/1-4F/BSP
VENT IN THE
TIP: prevents
pressure from
exceeding
30 PSI if tip
becomes
blocked
Aluminum
Nozzle
•
Art. Nr.
m)
4m
1
” (1
Operating Temperature:
-10°C TO 70°C
Threaded
Brass Insert
(1/4” BSP)
60
)
AIR BLOW GUNS
•
/2”
Redefining the Industry Standard,
the Groz Air Blow Guns are both
technically & aesthetically superior
to any other gun
•
High Impact & Weather Resistant.
Gun body is made from Nylon with
a Brass Threaded Insert ¼” BSP (F)
•
Gun Nozzle, Tubes & Springs are
made from Stainless Steel. Gun
uses Nitrile Rubber Seals
•
The gun has a soft moulded grip
for highest convenience in use & a
large handle for ease of operation
•
•
Designed with a Variable speed
trigger, the gun allows for
complete control on the air
dispensed
4.1
ABG/3
Air Blow Gun
with Stainless
Steel Nozzle
OK
4
(11
mm
Stainless
Steel
Nozzle
Nylon
Body
Vent In The Tip
prevents
pressure
from
exceeding
30 PSI if tip
becomes
blocked
OperatingTemperature:
-10°C to +70°C
Soft Moulded
Rubber Grip
Operating Pressure
3.5 BAR to 16 BAR
Constant oil-to-air density over a
wide range of flow
Tip
Noise
Blowing
Force at
100 PSI
Air
Consumption
at 100 PSI
Box
Qty.
ABG/1/1-4F/BSP
Plastic
77 db
0.26 kg
2.94 CFM
10
ABG/3/1-4F/BSP
4-1/2”
SS nozzle
80 db
0.35 kg
5.30 CFM
10
Art. Nr.
44
Variable
Speed
Triger
Threaded
Brass Insert
ABG/1
Air Blow Gun
with Plastic tip
MERCHANDISERS
customized solutions for u!
Display solutions
that offer
 MODULARITY
Unparalleled flexibility in
assembling assortments in the
dIsplay area
 DISPLAY EFFICIENCY
Space optimization to meet product
visibility needs

COST EFFECTIVENESS
Fast moving products to suit actual
market needs
Includes
1 Heavy Duty Stand (40” x 20” x 95”), with
perforated back for hanging display on
hooks
30 Hooks (15 are 6” long & 15 are 8” long)
Light Box with Groz Branding
Art. Nr.
Length
Height
Width
Box Qty.
D5
40” (1000 mm)
95” (2400 mm)
20” (500 mm)
1
* Stand is supplied
without the product
Groz Engineering Tools (P) Ltd.
Groz Net Industries
Village Kherki Daula, National Highway-8
Gurgaon-122001, Haryana, INDIA
TEL +91.124.282.7734/40, 2827777
FAX +91.124.2827980, 2827986
E-MAIL [email protected]
URL www.groz-tools.com
The GROZ name, GROZ logo and the
mark are trademarks of Groz Engineering
Tools (P) Ltd., India
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement