KAACTTRBLKA Fortis Digital Activity and Sleep

KAACTTRBLKA Fortis Digital Activity and Sleep
SOFTWARE INSTALLATION
• Open “Fortis” to install the APP.
• Save the program to your target storage folder.
• The APP will now be installed.
PERSONAL DATA SETTING, DATA SYNC
• Connect the Activity Tracker to your PC with the USB cable.
• Press the “Setting” on the APP main page, then you can set your personal data
and sync activity data. Press “Read Data” to connect the activity tracker to the
APP. A progress bar will be seen.
• Press “Update Setting” to upload or synch the Activity Tracker data.
• Pedometer Setting:
Set ID Code :
Set the ID Code, then press “Set ID Code”, then the ID will be saved.
Set Name :
Set the name as you want, then press “Set Name” and it will be saved.
• Set Device Time:
Press “Set Device Time”, then the device time will sync with the PC time.
Usually the device time will be updated once you press “Read Data”.
• Basic Information:
Enter your personal information such as your height, weight, stride length,
age, gender and daily goal, then press “Update Setting” to save the
information.
SAVING DATA
After reading data, press “Save As” to save your personal activity data to your storage
target folder. Next time, you can pick up the data file from the storage folder, if you
want to sync or view the activity data.
You can enter new data if necessary.
Tips:
In order to make the measurements more accurate, please submit your complete
personal setting data. When setting a new ID in the Activity Tracker, the old ID data
will be cleared.
You should upload your data at least once every 15 days due to the memory of the
activity tracker.
USAGE INSTRUCTION
Press the button for 10 seconds to activate the activity tracker, or the device will be in
idle mode.
Time, Date, Battery
Walking Steps
Calories Burned
Distance in KM
Activity Time in Hours
Daily Target in %
Sleep Mode
Press button for 5 seconds and measure
your sleep activity.
HOW TO WEAR THE TRACKER
BATTERY CHARGE
Connect the Activity Tracker to PC with USB cable. The device needs to be charged
for about 60 minutes, then the power will last 5 – 7 days.
Device standby: When the device is not used for a long time, the device will be in
low power consumption standby mode.
SPECIFICATIONS
Model #:
Body size:
Wristband:
Belt clip:
Weight:
Battery:
Display:
Data Memory:
KAACTTRBLKA
46 x 23 x 10mm
235 x 25mm
60.5(L) x 25(W)mm
9g
Rechargeable Lithium Polymer Battery
0.91” OLED
15 Days
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement