HV-F127 manual - Omron Healthcare

HV-F127 manual - Omron Healthcare
1
3
2
4
P
5
6
7
8
9
M
S
SP
E
MOCIAL
DE
ELEC
TRON
IC NE
RVE
STIM
ULAT
OR
Electronic Nerve Stimulator
E2 ELITE (HV-F127-E)
• Electronic Nerve Stimulator. Instruction Manual.
EN
• Neurostimulateur électronique. Mode d’emploi.
FR
• Elektronischer Nervenstimulator. Gebrauchsanweisung.
DE
• Elettrostimolatore. Manuale di istruzioni.
IT
• Neuroestimulador electrónico. Manual de instrucciones.
ES
• Elektronische zenuwstimulator. Gebruiksaanwijzing.
NLNL
• ɗɥɟɤɬɪɨɦɚɫɫɚɠɟɪ ɦɟɞɢɰɢɧɫɤɢɣ. Ɋɭɤɨɜɨɞɫɬɜɨ ɩɨ ɷɤɫɩɥɭɚɬɚɰɢɢ.
RU
• Elektronik Sinir Stimülatörü. KullanÕm KÕlavuzu.
TR
AR
IM-HV-F127-E-05-10/2014
1647391-4F
Instruction Manual
Electronic Nerve Stimulator
E2 ELITE
(HV-F127-E)
CONTENTS
1. Before using the unit
1
3
2
4
P
5
6
7
8
9
M
S
SP
E
MOCIAL
DE
2. How to use the device
ELEC
TRON
IC NE
RVE
STIM
ULAT
OR
„ Thank you for purchasing the OMRON Electronic Nerve
Stimulator E2 ELITE (HV-F127-E).
„ Please read this Instruction Manual thoroughly before using
this unit, this ensures safe and correct use.
„ Please keep this Instruction Manual always at hand for your
future reference.
2
1.1 Notes on safety . . . . . . . . . . . . . . . . . . . . 3
1.2 General information on OMRON E2 ELITE
Electronic Nerve Stimulator . . . . . . . . . . 4
1.3 Features of the product. . . . . . . . . . . . . . 4
1.4 Intended use . . . . . . . . . . . . . . . . . . . . . . 4
1.5 Package contents . . . . . . . . . . . . . . . . . . 5
1.6 Information on
high & low-frequency therapy . . . . . . . . . 5
1.7 Names and functions of the parts . . . . . . 6
2.1 How to insert batteries . . . . . . . . . . . . . . 8
2.2 How to connect the electrode cord . . . . . 8
2.3 How to attach the electrode pads . . . . . . 9
2.4 Examples of application . . . . . . . . . . . . . 9
2.5 How to treat. . . . . . . . . . . . . . . . . . . . . . 10
Treat with the Massage button . . . . . . . .11
Treat with the Quick Relief button. . . . . 12
Treat with the Region button. . . . . . . . . 12
2.6 After treatment – storing the unit. . . . . . 13
3. Maintenance
3.1 When it is difficult to attach the pads . .
3.2 How to clean and store . . . . . . . . . . . . .
3.3 Troubleshooting . . . . . . . . . . . . . . . . . .
3.4 Specifications . . . . . . . . . . . . . . . . . . . .
14
14
15
17
1.Before using the unit
1. Before using the unit
1.1 Notes on safety
(Please read this section carefully before using the unit.)
The icons and warning signs are indicated here for your
safety and correct usage of the product as well as to prevent injuries and/or damage to properties.
The icons and meanings are as follows:
Examples of Icons
The
icon indicates prohibitions (must not do).
Matters involving certain prohibitions are indicated by
text or pictures in or near .
The icon to the left means “Prohibitions to Disassemble”.
The icon indicates something that is compulsory
(must be observed).
Matters involving certain compulsory actions are indicated by text or pictures in or near .
The icon to the left refers to “General compulsory action”.
DANGER
This unit must not be used in combination with the
following medical devices:
(1)Internally transplanted electronic medical devices,
e.g. pacemakers
(2)Electronic life support equipment, such as respirators
(3)Electronic medical devices attached to the body,
such as electrocardiographs
Using this unit with other electronic medical devices
may cause erroneous operation of those devices.
WARNING
Persons with the following conditions must consult
the doctor before using this unit:
1) acute disease
2) malignant tumor
3) infectious disease
4) pregnancy
5) cardiac dysfunction
6) high fever
7) abnormal blood pressure
8) skin sensory disorders or skin problems
9) receiving medical treatment, especially those feeling discomfort
May cause an accident or ill health.
Do not use this unit near the heart, above the neck,
on the head, around the mouth or on diseased skin.
May cause an accident or ill health.
- Application of electrodes near the thorax may
increase the risk of cardiac fibrillation.
Do not use this unit simultaneously with other therapeutic device or in combination with ointments
including spraytype ointments.
May cause discomfort or ill health.
- Simultaneous connection of a PATIENT to a h.f. surgical
EQUIPMENT may result in burns at the site of the STIMULATOR electrodes and possible damage to the STIMULATOR.
- Operation in close proximity (e.g. 1 m) to a shortwave or
microwave therapy EQUIPMENT may produce instability
in the STIMULATOR output.
Do not use this unit for purposes other than treatment indicated in this manual.
May lead to accident, problems, or failure of the unit.
Do not insert the electrode cord plug into any place
other than the electrode cord jack of the main unit.
May cause an electric shock or accident.
Do not disassemble or remodel this unit.
May cause fire, trouble, or accident.
CAUTION
If the unit is not functioning properly or you feel discomfort, immediately stop using the unit.
If you feel any problems with your body or skin, consult
the doctor and follow his/her instructions.
If you want to move the Electrode Pad to another
region or your body during treatment, be sure to turn
off the power.
If not, you may receive a strong electrical shock.
Do not try to attach the Pads to any other person
during the treatment.
You may receive strong electrical shock.
Do not start treatment while wearing an electronic
device.
The settings and timings of the device may be affected.
Do not use this unit on infants or people not capable
of expressing their intentions.
May cause an accident or ill health.
Do not use this unit in places with high humidity
such as bathrooms or while taking a bath or shower.
You will receive a strong electrical shock.
Do not use this unit while sleeping.
The main unit may develop trouble, or the pad may move
to an unexpected region and cause ill health.
Do not use this unit while driving.
Receiving sudden strong stimulation may lead to traffic
accident or trouble.
Do not leave the Electrode Pad attached to the skin
after treatment.
Prolonged attachment may cause skin irritation or infection.
Be careful not to allow any metal object, such as a
belt buckle or necklace to come into contact with the
Electrode Pad during treatment.
You may receive a strong electrical shock.
Do not use cellular phones or other electronic
devices near this unit.
Do not use this unit to treat one region for a long
time (more than 30 minutes).
The muscles of the region under treatment may be
exhausted and may cause poor physical condition.
EN
3
1.Before using the unit
1.2
General information on OMRON E2 ELITE Electronic Nerve Stimulator
The OMRON E2 ELITE Electronic Nerve Stimulator
is an electro-therapeutic device.
The E2 ELITE Electronic Nerve Stimulator enables you to
reduce and relieve your pain symptoms. The treatment alleviates muscle and nerve pain through gentle stimulation. But
always remember that pain also has a very important warning
function, telling us that something is wrong. If you suffer from
any serious illness, consult your doctor in order to confirm
whether you can use the Electronic Nerve Stimulator.
For active people, it provides a massaging experience which
has a very beneficial effect on muscle and shoulder or neck
stiffness. It is very good for soothing overall bodily fatigue and
improves the blood circulation in the treated areas.
Our nerves, which radiate throughout the entire body as a
complex network, perform various tasks which are indispensable for maintaining proper functioning. They conduct
impulses between the central nervous system and an organ or
a part of the body. They also transmit commands from and to
the brain, and they regulate the body’s functions, as well as
muscle contraction and relaxation. Using this method of Electrical Nerve Stimulation, the important nerve functions can be
activated effectively. The electrical impulses, which are comparable to the natural bioelectricity, stimulate the body’s painrelieving mechanisms. In this way, the transmission of pain by
the nerve fibres is inhibited and secretion of pain-relieving,
morphine like substances such as endorphins, are triggered.
Furthermore, the blood flow through the treated body zones is
improved.
1.3 Features of the product
• 9 Automatic Programmes
The device allows you to select your favourite stimulation programme for optimized treatment according to your symptom
and needs.
Quick RELIEF Button (for muscle pain)
This function relieves acute pain quickly with high frequency of
1200 Hz. It is suitable for treatment of pain in the lower back
and joints.
REGION Button (4 programmes for shoulders, sole, calf,
and lower back)
Treats the selected region with effective pre-programmed
modes.
MASSAGE Button (4 programmes for Tapping, Kneading,
Pushing, and Rubbing)
Allows you to select the massage method according to your
needs.
• 4 Special Modes
Allows you to adjust the unit to your favourite stimulations.
Use the Special Modes of SOFT, REPEAT, POINT, WIDE and
Balance Adjustment (switching between red and
white buttons) in combination with the Automatic programme
to receive treatment in your favourite stimulation mode.
• Washable and long-lasting Long-Life Pads
1.4 Intended use
Medical Purpose
This Electronic Nerve Stimulator is intended to be used as a
massager to relieve (muscle) pain, stiffness and fatigue. The
massaging effect is achieved by electronic stimulation of the
nerves through electrode pads placed on the skin. Various
massage regions and treatment programs can be selected.
Suitable Users
Please read “Notes on safety” before using the unit.
(This unit should not be used by people prohibited from doing
so in “Notes on safety”.)
4
Environment
This unit is intended for home use only.
Effectiveness
Massager: relieve of (muscle) pain, stiffness and fatigue
Precautions for use
Please read “Notes on safety” before using the unit.
1.Before using the unit
1.5 Package contents
The following components are included in the box.
If any components are missing, please contact the nearest OMRON dealer.
1. Main unit
2. Electrode Cord
5. Electrode Holder
3. Long-Life Pad
6. Soft fabric pouch
(to be referred to as “Pad”
hereafter.)
One set contains two Pads.
1
3
2
6
4
5
P
7
8
9
M
S
SPECIAL
MODE
4. AAA size (R03) batteries for
7. Instruction Manual
trial use
ELECTRONIC NERVE STIMULATOR
1.6 Information on high & low-frequency therapy
What is frequency?
Frequency is the number of times electric stimulation is
applied to the body per second and is represented by a unit
called Hertz (Hz).
one second
3 stimulations in a second = 3 Hz
one second
100 stimulations in a second = 100 Hz
I. What is Low Frequency?
Although we do not notice it, our bodies generate very weak
electricity from various parts of the body including the brain,
heart, muscles, and nerves. This electricity is called bioelectricity. The bioelectricity plays an essential role for the normal
functioning of our bodies. Our bodies sensitively react to electric stimulation applied from the outside and cause various
changes. The method to treat abnormality of bioelectricity,
which is manifested as stiffness or pain, by effectively using
the above mentioned action is called electrotherapy of which
low-frequency therapy is typical.
Effects of low frequency stimulation
Low-frequency stimulation is effective in relieving symptoms
of chronic pain, stiffness and numbness. It is said to have the
effects to activate secretion of pain surpressing substances or
to improve the blood circulation.
Mechanism of low-frequency electrotherapy
- Pumping action of muscles Muscles contract and relax with the flow of the low-frequency
current. When the muscle relaxes, a large amount of blood
flows in, and when the muscle contracts, the blood containing
wastes is pumped out. With repeated actions, the blood flows
smoother and the blood circulation is improved.
Shutting out pain signal
When low-frequency current flows to the region experiencing
pain, it acts on the transmission mechanism of pain.
Thus low-frequency current is said to reduce the transmission
of pain to the brain.
EN
II. What is High Frequency?
- as used for the “Quick Relief” function High frequency stimulation is effective for acute (nerve) pain
and is said to be especially useful in the immediate blockage
of pain transmission compared to low-frequency stimulation.
Standard treatment time
Long-time treatment and strong stimulation may cause muscular fatigue and may generate adverse effects. In order to
avoid excessive treatment, this model is made to turn off the
power automatically after 15 minutes.
5
1.Before using the unit
1.7 Names and functions of the parts
Main Unit
Electrode Cord
Connects the Main unit with the Pad
Electrode Cord Plug
Intensity Adjustment
Dial/Power Button
Turns on and off the
power and adjusts the
intensity of stimulation.
Electrode
Cord Jack
1
Automatic Programmes
Shoulder
4
3
Sole
2
5
P
Select one programme from each course in
the treatment, region, and massage method.
Leg
Waist
6
7
8
M
Tap
Knead
9
Quick Relief Button
The programme treats the region with high frequency of 1200 Hz, which helps to relieve acute
pain promptly.
S
Push
Region Button
Rub
P
The unit treats the selected region with the effective programme.
SPECIAL
MODE
Massage Button
M
Select your favourite massage method according
to your symptom.
Special Mode
ELECTRONIC NERVE STIMULATOR
Battery
cover
You can use this mode when you want to adjust the
stimulation to your favourite programme according to
the stiffness and pain. This mode can be used in combination with any Automatic Programmes.
Soft Mode
The unit relieves stiffness comfortably with soft
S
stimulation without feeling irritation.
Repeat mode
The unit repeats your favourite stimulation.
Back of the Main Unit
6
1.Before using the unit
Electrode Cord Plug
Attach the red or the
white plug to each Pad.
Tab of the Pad
Hold the Tab to peel
off the Pad.
Balance Adjustment (Switching between red and
white buttons)
Point & Wide Mode
Point
The unit treats the red and the
white sides alternately.
The unit treats both the red
and white sides simultaneously.
* Select either the Wide or the Point Button.
R-button
Wide
Selecting
When
is
selected
When
selected
is
Emphasis on intensity is
placed upon the red side
while treating both sides
alternately.
Emphasis on intensity is
placed upon the red side
while treating both sides
simultaneously.
EN
The unit emphasizes therapy
on the red side.
W-button
The unit emphasizes therapy
on the white side.
Selecting
Emphasis on intensity is
placed upon the white side
while treating both sides
alternately.
Emphasis on intensity is
placed upon the white side
while treating both sides
simultaneously.
Selecting None of Them
Treats both red and white
sides with the same intensity
alternately.
Treats both red and white
sides with the same intensity
simultaneously.
7
2.How to use the device
2. How to use the device
2.1 How to insert batteries
1. Turn the Intensity Adjustment Dial/Power Switch to the
“OFF” position.
2. Open battery cover on the back of the
main unit.
3. Insert batteries according to the
polarities (+ and -) shown in the battery compartment.
1.5V LR03 SIZU'AAA'
OOOOOO
SIZU'AAA'
1.5V LR03 OOOOOO
General advice from OMRON on the handling of batteries
• The supplied batteries are for the trial use only and may
wear out in less than three months.
• Replace the worn batteries with new ones immediately.
• If you are not going to use the unit for more than three
months, remove the batteries.
• If you leave the unit without using it for a long time when
the batteries are included inside, leakage from the batteries may occur.
• Do not use new and worn batteries together or different
types of batteries together.
• Insert the batteries with the polarities (+ and –) in correct
alignment.
• When handling the batteries, be sure to read the notes
on the batteries.
• Dispose of the used batteries according to the applicable
local regulations.
4. Close the battery cover.
Standard for battery replacement
If you feel the massage stimulation is weak, the batteries may be worn. Replace the batteries with new ones.
2.2 How to connect the electrode cord
1. Turn the Intensity Adjustment Dial/
Power Switch to the “ ” position.
2. Insert the Electrode Cord Plug into
the Electrode Cord Jack on the
main unit.
3. Connect the Electrode Cord to the
Long Life Pads.
Place the Pads on a flat surface
and securely connect the Electrode Cord Plugs to the Pads.
* Although Electrode Cord Plugs
are provided in red and white,
either plug can be connected
with one of the Pads irrespective of color.
8
When using the unit for the first time
Take out the Pads from the clear plastic bag.
* Do not peel off the clear film attached to the Pad at this
time.
General advice from OMRON on the handling of Electrode Cord
• Avoid excessive bending and pulling of the Electrode
Cord.
• Hold the Electrode Cord Plug when unplugging the Electrode Cord from the Main Unit.
• If the Electrode Cord is torn or has a problem, please
contact the store where you purchased the unit or at the
nearest OMRON dealer.
2.How to use the device
2.3 How to attach the electrode pads
Attach each Pad to the region you want to treat without
bending it.
When using the unit for the first time
A clear plastic film is attached to the
Pads.
As the Pads have strong adhesiveness, peel off the clear plastic film
from the Pads and attach the Pads
to the region you want to receive
treatment.
* Discard the peeled off clear film
as it should not be used anymore.
* It may be difficult for you to attach
the Pads on your back such as
shoulders or lower back. It is a good
idea to ask someone to help you.
Attach the Pads close to the skin.
* If the Pads comes off from the skin, the unit is turned
off automatically in approximately 7 seconds.
General Advice from OMRON on the handling of Pads
•
•
•
•
Do not place pads stacked on each other.
Do not bend the Pads.
Do not touch the adhesive surface with your fingers.
When you perspire after taking a bath or immediately
after exercising, wipe your sweat off the region you want
to treat before using the unit.
• If a Pad attaches to cloth or other material and does not
come off easily, do not force it off. Instead, moisten the
back of the cloth to which the Pad is attached with a
small amount of water, and then the Pad will come off
easily.
• When the adhesive property of Pad drops, take appropriate measures as necessary.
• If you are going to use a wet Pad (see Section 3, Maintenance) or the Pad immediately after it is washed, let it dry
sufficiently. Especially let the adhesive surface air-dry.
2.4 Examples of application
Shoulders
Stiff shoulders are presumably caused by blood congestion of
trapezius muscle that moves shoulders, compression of
nerves by the accumulation of fatigue substances, or poor
blood circulation of subcutaneous tissues such as muscles.
Attach the Pads symmetrically on the region of stiff shoulders
with the backbone as the center.
Sole
Chilly feeling is presumably caused by poor blood circulation
in the limbs when the nerves are out of balance.
Swelling and fatigue of feet is presumably caused by the poor
reflux of blood and body fluid. Attach one Pad to the sole and
another one to the calf.
EN
Trapezius muscle
For stiff shoulders,
it is effective to
attach the Pads to
the shaded regions
as shown in the
diagram.
It is effective to
attach the Pads
to the shaded
regions of sole
as shown in the
diagram.
9
2.How to use the device
Calf
Swelling and fatigue of the Calf is presumably caused by congestion of blood and accumulation of fatigue substances in
that region. Attach the Pads to upper and lower calf.
Waist (Lower Back)
Back pain is caused by various reasons. The type of back pain
that can be treated by low-frequency therapy includes stiffness of the lower back, muscle pain, and neuralgia (nerve
pain).
Attach the Pads symmetrically to the regions you feel pain with
the backbone as the center.
It is effective to
attach the Pads
to the shaded
regions of lower
back as shown
in the diagram.
It is effective to
attach the Pads to
the shaded regions
of calf as shown in
the diagram.
2.5 How to treat
This section explains the treatment procedure and the
entire operation flow from turning on the power to storing of the unit.
Three treatment methods are available. Select your
favourite one to receive treatment.
– Treat with the Quick Relief Button
When you want to relieve severe acute pain promptly.
– Treat with the Region Button
When you want to treat the selected region of the shoulder, soles, calves and lower back (waist) with the effective
program.
– Treat with the Massage Button
When you want to treat the region according to your
symptom and favourite operation by selecting the massage method from Tapping, Kneading, Pushing, and Rubbing.
Have you connected the Electrode Cord? (Refer to
page 8.)
Have you attached the Pads to the regions you want to
receive treatment? (Refer to page 9.)
1. Turn on the power.
Rotate the Intensity
ck
Dial/Power
Button
Cli
downwards.
When you hear a click,
the power is turned on
and the treatment
starts.
* When you use the
unit for the first time,
the Shoulder light
will flash and WIDE
will be displayed.
When you use the
unit for the second
time and after, the Buttons you used in the previous treatment will flash.
1
3
2
6
4
5
P
7
8
9
M
S
SPECIAL
MODE
ELECTRONIC NERVE STIMULATOR
If the Pads come off
If the Pads come off from the skin, the power will be
turned off automatically in approximately 7 seconds. Turn
the Power to OFF, then re-attach the Pads correctly and
turn on the power again.
2. Select one treatment method.
– Treat with the Massage Button
(Refer to page 11.)
– Treat with the Quick Relief Button (Refer to page 12.)
– Treat with the Region Button
(Refer to page 12.)
10
2.How to use the device
3. Adjust the intensity of
4. When the treatment
stimulation.
Select your favorite
intensity level from 1
to 10 by rotating the
Intensity Dial/Power
Button.
Standard for treatment.
Duration: 10 to 15
minutes per region for
each treatment.
Number of treatment times: Once or
twice a day.
Intensity: As high as you feel comfortable when using this
unit.
1
3
2
6
4
5
P
7
8
9
M
S
SPECIAL
MODE
ELECTRONIC NERVE STIMULATOR
ends, turn off the
power.
ck
Cli
Rotate the Intensity
Dial/Power
Button
upwards. When you
hear a click, the
power is turned off.
* The power will be
turned off automatically in approximately 15 minutes
after the treatment
starts. Even when
the power is turned
off
automatically,
turn off the Intensity Dial/Power Button. Otherwise, the
batteries will wear out slightly faster.
1
3
2
6
4
5
P
7
8
9
M
S
SPECIAL
MODE
ELECTRONIC NERVE STIMULATOR
5. Store the unit.
* If you leave the Pads as they are, they will become dirty
or the adhesiveness will deteriorate. When the treatment
ends, attach the Pads to the Electrode Holder for storage. (Refer to page 13.)
How to treat
Treat an area by selecting one of the programmes within Relief, Region or Massage
1. Push the Massage (M)
Treat an area with the
M
button
When you want to treat an area according to your symptom and favourite operation by selecting the massage
method from Tapping, Kneading, Pushing, and Rubbing
Button.
Each time you push the
Massage Button, the
massage
method
flashes in the order of
Tapping,
Kneading,
Pushing, and Rubbing.
3
2
4
5
P
6
2. Select
your favourite
massage
method
according to your symptom.
The massage type will
change every time you
push the massage button.
* A blinking yellow light
indicates the function
you have selected.
1
1
7
8
EN
9
M
SOFT
REPEAT
POINT
6
R
SPECIAL
7 MODE 8
W
9
WIDE
M
ELECTRONIC
NERVE STIMULATOR
When Tapping
is selected
11
2.How to use the device
How to treat
Treat an area by selecting one of the programmes within Relief, Region or Massage
Treat an area with the
button
Treat an area with the
When you want to relieve severe acute pain promptly
1. Push the Quick Relief
Button.
This is a program using
high-frequency stimulation of 1200 Hz, which is
said to relieve acute pain
quickly.
* Blinking yellow lights
will indicate what functions are activated.
button
P
When you want to relieve severe acute pain promptly
1. Push the Region Button.
1
1
3
2
4
5
P
Each time you push the
Region Button, the display flashes in the order
of Shoulder, Sole, Leg,
and Waist.
3
2
6
7
8
9
M
SOFT
REPEAT
POINT
R
SPECIAL
MODE
W
WIDE
ELECTRONIC
4
5
P
2. Select
the region to
which the Pads are
attached.
For example, if you
attach the Pads to your
shoulders, select Shoulder. The unit treats you
with the program effective for Shoulder.
* Blinking yellow lights
will indicate what functions are activated.
1
1
6
7
8
9
M
SOFT
REPEAT
POINT
R
2
SPECIAL
MODE
3
4
W
WIDE
P
5
ELECTRONIC
NERVE STIMULATOR
When Shoulder is selected
How to use the Special
Mode
You can use this Mode
when you want to adjust
the stimulation to your
favourite one according to
the stiffness or the pain.
You can use this Mode in
combination with all Automatic Programmes.
* The Button you have
selected will be flashing.
* To stop the function you
selected, push the Button again.
12
X If you feel irritation:
Use the Soft Mode.
The unit relieves
stiffness with soft
S
stimulations without causing irritation.
X If you want to relieve stiff shoulders intensively
X If you want to repeatedly
X If you want to use different kinds of stimulation for
use only your favourite
stimulation:
Use the Repeat Mode.
The unit repeats your
last selected stimulation.
and fully:
Select the Point Mode.
X If you want to effectively massage a wide range of
an area such as the lower back:
Select the Wide Mode.
the right and left sides according to the stiffness:
Select red or white Button.
Point & Wide Mode, Balance Adjustment (Switching between Red and
SPECIAL
White Buttons)
MODE
The stimulation of each Pad varies.
(For detailed use of this Mode, refer to
page 7.)
2.How to use the device
2.6 After treatment – storing the unit
When the Pads are poorly maintained, they will become
dirty or the adhesiveness will deteriorate. When the
treatment ends, attach the Pads to the Electrode Holder
and store them.
1. Turn off the Power and
remove the Electrode
Cord Plug from the Main
Unit.
3. Lightly attach the Pads to
the Electrode Holder.
* You may leave the Electrode Cord connected to
the Pads as it is.
* Do not press the Pads
hard to the Electrode
Holder. It may cause the
adhesive surface to be
damaged.
* Keep the Electrode Holder clean.
4. Bundle
the Electrode
Cord and wrap it around
the Electrode Holder.
* Wrap the Electrode
Cord loosely.
5. Store the Main Unit and
2. Peel off the Pads.
the Electrode Holder in
the Soft Fabric Pouch.
* Hold the Tab to peel off
the Pads without touching the adhesive surface.
1
3
2
6
4
5
P
7
8
9
M
S
Example: When the Pad is
attached to the shoulder
SPECIAL
MODE
ELECTRONIC NERVE STIMULATOR
EN
13
3.Maintenance
3. Maintenance
3.1 When it is difficult to attach the pads
Wash the Pads when the adhesive surface becomes
dirty and the Pads are difficult to attach.
– Wash the Pads after every thirty uses. Pads can be
washed approximately ten times.
– Pads are consumables. Purchase the optional Pads
when the adhesive surface is damaged. (Refer to
page 17.)
* The life of Pads may vary by the frequency of wash,
skin condition, and storage state.
1. Turn off the power, then remove the Electrode Cord from
the Pad.
3. Sufficiently dry the Pads and let
the adhesive surface airdry.
* Do not wipe the adhesive surface with a tissue paper or a
cloth. If a tissue paper is
adhered to the adhesive surface by accident, do not try to
peel it off. Instead, moisten the
tissue paper with a small
amount of water, and then it
will come off easily.
4. Lightly attach the Pad to the
2. Wash the Pad softly with
Electrode Holder for storage.
(Refer to page 13.)
your fingertips under
slow running cold water
for several seconds.
General advice from OMRON on the handling of Pads
• Do not use hot water, detergent, or chemicals such as
thinner or benzine.
• Do not scratch the adhesive surface with your nail or a
brush.
• Do not wash the Pads too long or too frequently.
• Do not store the Pads under high temperature, high
humidity, and direct sunshine.
* The adhesive surface may be damaged and the Pads
may last shorter.
* If the adhesive surface becomes sticky or the Pad
peels off, leave the Pad in the refrigerator (do not
freeze) overnight. The adhesion may be restored.
3.2 How to clean and store
Notes on care and storage
• Keep the unit clean all the
time.
• Be sure to turn off the Power
and remove the Electrode
Cord from the Main Unit
when cleaning the unit.
• Wipe off stains on the Main
Unit with a soft cloth.
• If the unit is heavily stained, wipe it with a cloth moistened
with water or detergent. Wipe off the unit with a dry cloth.
* Be careful so that no water should get into the Main Unit.
• Do not use benzine, thinner, or
gasoline to clean the unit.
• Do not store the unit under high
temperature, high humidity, and
direct sunshine, or where there is a
lot of dust and/or corrosive gas.
• Keep the unit out of reach of
children.
• If you are not going to use the
unit for more than three
months, store the unit after
removing the batteries.
* If you do not observe the
above-mentioned notes or
correct use of the unit,
OMRON cannot take responsibility on quality of the unit.
ELECTR
How to clean the Unit
ONIC NERVE
STIMUL
ATOR
14
Thinner
ELE
CTR
ON
IC
NER
VE
STI
MU
LAT
OR
Gasoline
3.Maintenance
3.3 Troubleshooting
Problem
„ The power cannot
be switched on.
Cause
„ The batteries are wrongly inserted.
„ The pads are not properly attached to the
skin.
„ The power switches „ The pads are removed from the skin·
off to soon.
„ The power switches „ The batteries are worn out or empty.
off while the unit is
„ The power turns automatically off after
in use.
15 minutes.
„ The electrode cord is broken.
„ The pads do not
attach to the skin.
„ The clear film on the adhesive surface of
the pad has not been removed.
„ The adhesive surface of the pad is dirty.
„ The pads are used directly after washing
them.
„ The adhesive surface of the pads is
damaged.
„ The pads may have been used while
perspiring.
„ The pads may have been washed too long
and too frequently.
„ The pads may have been stored under
high humidity, high temperature or in direct
sunshine.
„ The pads are not in close contact with the
skin.
„ The stimulating
effect cannot be felt. „ The pads are attached, but overlapping
each other.
„ The electrode cord is not connected
properly.
„ The intensity is at a too low level.
„ The batteries are worn out or empty.
„ The adhesive surface of the pads is
damaged.
„ The treatment has continued too long.
„ The skin turns red.
„ The skin feels
irritated.
Remedial Action
э Insert the batteries according given directions.
э Reattach the pads securely to the skin. (Otherwise
power will switch off automatically).
э Switch off the unit before removing the pads from the
skin.
э Replace with new batteries, following given
directions.
э Replace the electrode cord with a new one.
э Remove the film.
э Clean the pads, following given directions.
э After washing, allow the pads sufficient time for
drying.
э Replace the pads with new ones.
э Leave the pads in a refrigerator overnight.
э Reattach the pads to the skin properly.
э Reattach the pads to the skin while assuring they do
not overlap.
э Connect the electrode cord properly.
EN
э Increase the intensity.
э Replace the batteries with new ones, following
direction given.
э Replace the pads with new ones.
э Limit the treatment time to the programmed
15 minutes.
э Reattach the pads to skin properly.
„ The pads are not in close contact with the
skin.
„ The adhesive surface of the pads is dirty or э Wash the pads, following given directions.
dry.
„ The adhesive surface of the pads is
э Replace the pads with new ones.
damaged.
* If the unit does not operate after taking the above-mentioned measures, contact the nearest OMRON dealer.
15
3.Maintenance
Important information regarding Electro Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC.s
and mobile (cellular) telephones, medical devices in use may
be susceptible to electromagnetic interference from other
devices.
Electromagnetic interference may result in incorrect operation
of the medical device and create a potentially unsafe situation.
Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the aim to prevent unsafe product situations, the EN60601-1-2:2007 standard has been implemented. This standard defines the levels of immunity to
electromagnetic interferences as well as maximum levels of
electromagnetic emissions for medical devices.
This medical device manufactured by OMRON Healthcare
conforms to this EN60601-1-2:2007 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
Do not use mobile (cellular) telephones and other devices,
which generate strong electrical or electromagnetic fields,
near the medical device.
This may result in incorrect operation of the unit and create a
potentially unsafe situation.
Recommendation is to keep a minimum distance of 7 m. Verify
correct operation of the device in case the distance is shorter.
Further documentation in accordance with EN60601-1-2:2007
is available at OMRON Healthcare Europe at the address
mentioned in this instruction manual.
Documentation is also available at www.omron-healthcare.com.
16
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature,
indicates that it should not be disposed of, with
other household wastes at the end of its working
life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
This product does not contain any hazardous substances.
Disposal of used batteries should be carried out in accordance
with the national regulations for the disposal of batteries.
3.Maintenance
3.4 Specifications
Product Description
Model (code)
Power Supply
Battery Life
Frequency Generation
Power Consumption
Maximum Output Voltage
Maximum Output Current
Operating Temperature and humidity
Storage Temperature and humidity
Main Unit Dimensions
Weight
Electronic Nerve Stimulator
E2 ELITE (HV-F127-E)
3 V DC (with two AAA alkaline or manganese batteries)
New alkaline battery will last for approx. 3 months (when used for 15 minutes day
continuously).
Note: Supplied battery is for trial use. This battery may run out within 3 months.
Approx. 1 to 1200 Hz
Approx. 40 mA
U ≤ 90 V (during 1 kΩ load)
I ≤ 10 mA (during 1 kΩ load)
10°C to 40°C, 30 to 85% RH
–20°C to 60°C, 10 to 95% RH
60 (W) x 154 (H) x 21 (D) mm
Approx. 120 g (including batteries)
* In the interest of product improvement, specifications are subject to change without notice.
* This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive).
* This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., Japan.
Available accessories / replacement parts:
1. Electrode Pads (Long Life Pads) with holder
2. Electrode Cord (with safety plug)
3. Electrode Pad Holder
order no. 4928818-7
order no. 3027801-6
order no. 1614950-5
= Type BF
= Warning: read the instruction manual carefully
EN
Disposal of this product and used batteries should
be carried out in accordance with the national regulations for the disposal of electronic products.
This product should not be used by persons with
medical implants, e.g. heart pacemakers, artificial
heart, lung or other electronic life support systems.
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement