Jetson BEAM JBEAM electric folding scooter Manual

The Jetson BEAM JBEAM is an innovative electric folding scooter designed for everyday use. It features a 250W brushless hub motor, 24v, 4.4Ah LG battery and can reach up to 14 MPH. The scooter includes a front electric brake, rear foot brake, LED headlight, and a LCD display. It also comes with a charger and auxilary wheels. The Jetson BEAM JBEAM is UL certified and has a weight limit of 250lbs. It can be folded for easy storage and transporting.

PDF Download
Document
Jetson BEAM JBEAM Electric Folding Scooter Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Electric Motor
  • Folding Design
  • LCD Display
  • Bluetooth Connectivity
  • LED Headlight
  • Pulsing Beam Light
  • Rear Wheel LED Lights

Frequently asked questions

To turn on your Jetson Beam Jbeam, place one foot on the scooter and kick off with your other foot to put it in motion, while simultaneously holding down the thumb throttle (on right side of handlebar) for 5 seconds.

To turn off your Jetson Beam Jbeam, make sure the scooter is not in motion, then press the thumb throttle and electric brake (on left side of handlebar) down simultaneously.

Connect the charger’s electric cable to an electrical outlet. Open the cover to the charging port in your scooter and then connect the charging cable to the scooter’s charging port under the footboard, on the right side at the front.

Open the Quick Release Lever and slide the expandable handlebar all the way down. Once it’s completely stored away, lock the Quick Release Lever. Pull the Folding T-bar Latch out, and pull the handlebars out to the side. Push one handlebar down at a time, and press in until they are fully stored. Once both handlebars are folded down, bring the Folding T-bar Latch back to its original position. Open the Folding Lock Lever and press the Release Button. Fold the handlebar down towards the rear wheel until you hear a “click.” Once it’s fully folded, close the Folding Lock Lever to secure.
Preparing document for printing…
0%