Origo™ Tig 4300iw AC/DC, TA24 AC/DC

Origo™ Tig 4300iw AC/DC, TA24 AC/DC
Origo™ Tig 4300iw AC/DC, TA24 AC/DC
For demanding TIG welding applications
Designed for high quality TIG-welding
Origo™ Tig 4300iw AC/DC welding power source
provide excellent arc strike and consistent, stable arc in
both DC and AC modes. Typical materials for AC
welding include aluminium, aluminium alloys and
magnesium alloys. With stainless steel, mild steel and
copper alloys being typical for DC.
AC welding with QWave™
One of the most important tasks of a TIG welding power
source is to provide a stable arc. Origo™ Tig 4300iw
AC/DC with the QWave™ function, which optimises the
AC wave form to give a smooth arc and at the same
time the lowest possible noise without compromising the
weld result.
True AC rating continually monitors the actual current
and automatically adjusts the output to maintain the
preset current irrespective of variations in the welding
circuit layout.
Easy to use
Origo™ TA24 AC/DC’s offer the necessary functions for
TIG AC/DC and MMA AC/DC welding in an easy to
understand MMC panel.
AC Balance is the setting to control arc cleaning and
penetration and AC Frequency setting is to control arc
width.
It also has a setting to control Electrode preheating with
a possibility to have different shapes of the electrode
and at the same time provide better starts with an
extended life time of the electrode.
TIG torches and Accessories
Origo™ Tig 4300iw AC/DC offer a complete range of
TXH ™ TIG torches, foot control, separate remote
controls and TXH ™ r with integrated remote.
• Designed for quality TIG-welding in all types of
material.
• QWave™- enables AC welding with high arc
stability and low noise.
• AC Frequency and Balance control- Optimises weld
pool
• Electrode preheating – excellent start and extended
electrode life time
• DC Pulsed TIG welding- easy control of heat input
and the weld pool.
• DC Micro Pulse – minimize heat effected zone
especially on thin sheets
• ESAB LogicPump – ELP, automatic start of the
cooling unit by connection of a liquid-cooled torch
• Energy save mode – fan and pump on demand
• ESAB 2-program function -possibility to preprogram and change program during actual welding.
Applications
• Repair and maintenance
• Pipe and tube manufacturing
• General fabrication and civil construction
• Automotive
• Process industry
• Shipbuilding and offshore
• Transport and mobile machinery
XA00132720
• User-friendly TA24 AC/DC panel - All welding
parameters presented in an easy to understand
panel.
• Min/max current setting at TA24 AC/DC when using
T1 Foot CAN
• True MMA welding characteristics in AC and DC
mode - Hot start, Arc force, and polarity switch (DC).
• VRD – Voltage Reduction Device – a safety function
when welding in MMA mode.
Technical data
Tig 4300iw
Origo™ Tig 4300iw with 4
wheel trolley
Ordering information
0460 100 880
0458 530 881
0459 145 880
430/27.2
400/26
315/22.6
0-10
0-10
0-25
0.01-2.5
10-152
50-98
83
75
0.89
-10 to +40
< 70
76
IP 23
H
IEC/EN 60974-1, -3, -10
625x394x776
95
Water cooling unit:
Cooling capacity, kW, l/min at 40 C
Coolant volume, l
Max flow, l/min
Max pressure, 50/60 Hz bar
Weight, kg
External dimension, mm l x w x h
Integrated
2.0/1.0
5.5
2.0
3.4
-
0459 307 881
Remote control AT 1 CAN
Remote control AT 1 CoarseFine CAN
T1 Foot CAN incl 5 m cable
0459 491 883
0459 491 884
0460 315 880
Remote interconnection cables:
5 m CAN
10 m CAN
15 m CAN
25 m CAN
0.25 m CAN (recommended for Remote adapter kit)
0459 554 880
0459 554 881
0459 554 882
0459 554 883
0459 554 884
TIG torches:
TXH ™ 400w 4m OKC 50
TXH ™ 400w 8m OKC 50
TXH ™ 400w HD 4m OKC
TXH ™ 400w HD 8m OKC
TXH ™ 400wr HD 4m OKC
TXH ™ 400wr HD 8m OKC
Remote adapter kit incl holder for remote versions
4 - 430
16 - 430
400/3
25
4x4
Quality accessories for the quality welder
0460 014 840
0460 014 880
0460 014 841
0460 014 881
0461 014 841
0461 014 881
0459 491 912
For additional torches, see separate fact sheet
Delivery content: 5 m mains cable incl plug, 2 m gas hose incl. 2
hose clamps and return cable 5 m incl earth clamp.
ESAB offers a wide range of accessories. The complete range,
along with product information, is available at our local web-sites,
look at www.esab.com or contact your local ESAB dealer.
Unrivalled service and support
Our commitment and ability to deliver the expected service and
support starts immediately after the order is confirmed. We
endeavour to offer our customers an After Sales service, which is
second to non. A strong and skilful service organisation is
prepared to offer service and maintenance, calibration, validation
and upgrading of equipment and software.
The service organisation will offer standardised solutions for the
reconditioning or modification of existing products.
Spare and wear parts are manufactured according to ESAB’s
quality plan. Exchange Printed Circuit Board (PCB), exchange
modules and components are available for all our products in
order to reduce downtime to an absolute minimum. ESAB is
continuously upgrading authorised service partners for local
service support. Customers who have their own service and
maintenance personnel will always be offered a service-training
package as part of a total ESAB offering. However, product and
process training for end-users will form an additional part of the
ESAB offering. Always ask your ESAB sales representative or
distributor for a complete ESAB solution.
ESAB AB
Box 8004
SE-402 77 GÖTEBORG SWEDEN
Phone: +46 31 50 90 00 Fax +46 31 22 04 49
E-mail: info@esab.se
www.esab.com
2007-05-14 / ESAB reserves the right to alter specifications without prior notice
Origo™ Tig 4300iw AC/DC, TA24 AC/DC
Trolley 4 wheel
Multi Voltage unit,
(3x208/230/400/460/475/575V, 50/60 Hz)
Handle incl mounting screws for separate installation
(Complete set = 2)
Setting range TIG AC/DC
Setting range MMA
Mains supply, V/Ph
Fuse type C MCB, A
Mains cable, Ø mm2
Maximum output DC/AC
at 40% duty cycle, TIG , A/V
at 60% duty cycle, TIG, A/V
at 100% duty cycle, TIG, A/V
Slope up, sec
Slope down, sec
Gas post-flow, sec
Pulse frequency DC, sec
Frequency AC, Hz
AC balance, %
Open circuit voltage, V DC
Energy save mode, W
Power factor at 100% , at TIG mode
Operating temperature, C
Continual sound pressure at no load, db (A)
Efficiency at 100%, at TIG mode, %
Enclosure class
Insulation class (Main trafo.)
Standards:
External dimensions mm, lxwxh
Weight, kg incl. cooling unit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising