LED notice - Cleanside

LED notice - Cleanside
LED EXAMINATION LAMP
Thank you and congratulations for purchasing this examination lamp which has been subject of all our care during
manufacture and quality control. This product will give you full satisfaction for many years. Before using it, you should
read this notice carefully.
Legal Compliance:
CE marking according to Directive 93/42 CEE and EN 60598-2-1/A11, EN 60598-2-1, EN 60598-2-4, EN 60598-2-25, EN
60601-1, EN 60601-1-2, EN 60601-2-41, EN 50581-2-41 (ROHS2)
The package contains the following parts:
1. Examination lamp equipped with LED
2. Screws for fixing (x 4)
3. User Manual
Uses:
This lamp is specially designed for indoor lighting, use it with our various fitting optional equipments.
Recommendations:
Before installing the lamp or maintenance, always disconnect the plug from the socket.
Do not use the examination lamp in a humid atmosphere.
Do not close ventilation openings on the head lamp.
Maintenance instructions and cleaning:
Mounting and connecting the lamp examination should be performed by qualified persons. For any maintenance, be
sure that the lamp is unplugged.
All cleaning products (disinfectant, detergent, etc ....) can be used. For any rebel spot do not hesitate to use an abrasive
cream agent.
Installation instructions:
1. Pull out the plastic cover of the lamp base
2. Screw the lamp on the fixation (by the top)
3. Replace the plastic cover
If the external cable of this lamp is damaged, it must be replaced exclusively by the manufacturer, its
service agent or similarly qualified person, in order to avoid any risk
If the external cable of this lamp is damaged, it must
be replaced exclusively by the manufacturer, its
service agent or similarly qualified person, in order
to avoid any risk.
Review date : 05/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement