ice machine - Nyco Products Company

ice machine - Nyco Products Company
ICE MACHINE
Cleaning Procedures
Water scale is a naturally occuring problem on both exterior and interior surfaces/components of ice machines.
Scale buildup is unsightly and will interfere with the function of the machine. Weekly interior and exterior
cleaning is recommended. Interior operational system cleaning and sanitizing is recommended every 6 months
or more frequently in hard water areas.
Supplies
1.
Personal Protective Equipment (PPE): rubber gloves, protective eye glasses
2.
Properly diluted Ice Machine Cleaner
3.
Properly diluted or ready to use sanitizing solution (quaternary ammonium based solution only)
4.
Synthetic scrub pad or stainless steel wool (do not use steel wool or aggressive scrubbing pads)
5.
Sponge
6.
Plastic pail for fresh water
7.
Disposable paper towels
Interior Cleaning
Machine Cleaning/Sanitizing Cycles
CLEANING CYCLE
1.
Turn off ice machine
2.
Remove ice from bin
1.
Turn off ice machine
3.
Wipe interior surfaces to remove excess water and
loose dirt and soil
2.
Allow ice to melt off evaporator
3.
Remove access covers
4.
Apply properly diluted Ice Machine Cleaner to
interior surfaces
4.
If equipped, turn on CLEAN cycle
5.
Allow to remain on surfaces to dissolve scale and
water deposits
5.
Wait for water to fill trough and flow over evaporator
6.
Add properly diluted Ice Machine Cleaner to trough
6.
Scrub to remove stubborn deposits
7.
Let machine run through cleaning cycle
7.
Rinse with fresh water
8.
Turn off ice machine
8.
Wipe dry
9.
Inspect interior parts for cleaning
9.
Apply sanitizing solution
10.
10.
Allow to dry
Exterior Cleaning
Remove and clean parts as needed
(follow manufacturer’s directions)
SANITIZING CYCLE
1.
If equipped, turn on CLEAN cycle
Wipe exterior surfaces to remove loose dirt and soil
2.
Wait for water to fill trough and flow over evaporator
Apply properly diluted Ice Machine Cleaner to
exterior surfaces
3.
Add proper dilution of sanitizing solution to trough
4.
Let machine run through sanitizing cycle
3.
Scrub to remove stubborn deposits
5.
Turn off ice machine
4.
Rinse with fresh water
6.
5.
Wipe dry
Sanitize any removed parts and allow to air dry
- do not rinse
6.
Apply sanitizing solution
7.
Replace any removed parts
Allow to dry
8.
Replace access covers
9.
Turn on ice machine
1.
2.
7.
Nyco Products Company
800.752.4754
nycoproducts.com
Code: PR-03 r71513
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement