advertisement
SPS-R
Cut-to-Fit LCD
Screen Protector Kit
USER MANUAL
Thank you for choosing Sensei.
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit screen protector is designed to protect your device’s LCD screen from scratches, dust, and smears. It’s easy to apply and remove, it adheres to the LCD screen without leaving behind any sticky residue, and the paper backing includes printed grid lines to help you custom-fit the screen protector to the exact size you need.
Please read these instructions carefully before applying your Sensei Cut-to-Fit LCD Screen
Protector.
Box Contents
• Six (6) screen protectors
• Three (3) wet wipes
• Three (3) dry wipes
• Applicator card
Instructions
Note: Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of your camera’s LCD screen.
1. Measure the height and width your device’s LCD screen in millimeters.
2. Using a pair of scissors or a razor and a straight edge, trim the screen protector along the guidelines that correspond to your camera’s LCD size.
3. Remove all films or other intervening substances from your camera’s LCD.
4. Clean the LCD with the included wet wipe, and then wipe it dry with the dry wipe. Be sure to remove all dust and fingerprints.
5. Partially peel off the backing from the screen protector. Be careful not to get any fingerprints on the exposed side of the screen protector.
6. Make sure your camera is on a stable surface, and align the screen protector with the camera’s LCD.
Tip: Turning on the
LCD will make it easier to see the edges when aligning the screen protector.
7. Hold the backing of the screen protector up while gently pushing down on the screen protector with the included applicator card. As you push the applicator card along the camera’s LCD to apply the screen protector, the backing will gradually peel off.
8. Use the applicator card to smooth out any remaining air bubbles by pushing them to the edge of the screen protector.
One-Year Limited Warranty
This SENSEI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE
WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Sensei Customer
Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Sensei along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.madebysensei.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SENSEI is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
Thank you for choosing Sensei.
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit screen protector is designed to protect your device’s LCD screen from scratches, dust, and smears. It’s easy to apply and remove, it adheres to the LCD screen without leaving behind any sticky residue, and the paper backing includes printed grid lines to help you custom-fit the screen protector to the exact size you need.
Please read these instructions carefully before applying your Sensei Cut-to-Fit LCD Screen
Protector.
Box Contents
• Six (6) screen protectors
• Three (3) wet wipes
• Three (3) dry wipes
• Applicator card
Instructions
Note: Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of your camera’s LCD screen.
1. Measure the height and width your device’s LCD screen in millimeters.
2. Using a pair of scissors or a razor and a straight edge, trim the screen protector along the guidelines that correspond to your camera’s LCD size.
3. Remove all films or other intervening substances from your camera’s LCD.
4. Clean the LCD with the included wet wipe, and then wipe it dry with the dry wipe. Be sure to remove all dust and fingerprints.
5. Partially peel off the backing from the screen protector. Be careful not to get any fingerprints on the exposed side of the screen protector.
6. Make sure your camera is on a stable surface, and align the screen protector with the camera’s LCD.
Tip: Turning on the
LCD will make it easier to see the edges when aligning the screen protector.
7. Hold the backing of the screen protector up while gently pushing down on the screen protector with the included applicator card. As you push the applicator card along the camera’s LCD to apply the screen protector, the backing will gradually peel off.
8. Use the applicator card to smooth out any remaining air bubbles by pushing them to the edge of the screen protector.
One-Year Limited Warranty
This SENSEI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE
WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Sensei Customer
Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Sensei along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.madebysensei.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SENSEI is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
Thank you for choosing Sensei.
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit screen protector is designed to protect your device’s LCD screen from scratches, dust, and smears. It’s easy to apply and remove, it adheres to the LCD screen without leaving behind any sticky residue, and the paper backing includes printed grid lines to help you custom-fit the screen protector to the exact size you need.
Please read these instructions carefully before applying your Sensei Cut-to-Fit LCD Screen
Protector.
Box Contents
• Six (6) screen protectors
• Three (3) wet wipes
• Three (3) dry wipes
• Applicator card
Instructions
Note: Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of your camera’s LCD screen.
1. Measure the height and width your device’s LCD screen in millimeters.
2. Using a pair of scissors or a razor and a straight edge, trim the screen protector along the guidelines that correspond to your camera’s LCD size.
3. Remove all films or other intervening substances from your camera’s LCD.
4. Clean the LCD with the included wet wipe, and then wipe it dry with the dry wipe. Be sure to remove all dust and fingerprints.
5. Partially peel off the backing from the screen protector. Be careful not to get any fingerprints on the exposed side of the screen protector.
6. Make sure your camera is on a stable surface, and align the screen protector with the camera’s LCD.
Tip: Turning on the
LCD will make it easier to see the edges when aligning the screen protector.
7. Hold the backing of the screen protector up while gently pushing down on the screen protector with the included applicator card. As you push the applicator card along the camera’s LCD to apply the screen protector, the backing will gradually peel off.
8. Use the applicator card to smooth out any remaining air bubbles by pushing them to the edge of the screen protector.
One-Year Limited Warranty
This SENSEI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE
WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Sensei Customer
Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Sensei along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.madebysensei.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SENSEI is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
Thank you for choosing Sensei.
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit screen protector is designed to protect your device’s LCD screen from scratches, dust, and smears. It’s easy to apply and remove, it adheres to the LCD screen without leaving behind any sticky residue, and the paper backing includes printed grid lines to help you custom-fit the screen protector to the exact size you need.
Please read these instructions carefully before applying your Sensei Cut-to-Fit LCD Screen
Protector.
Box Contents
• Six (6) screen protectors
• Three (3) wet wipes
• Three (3) dry wipes
• Applicator card
Instructions
Note: Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of your camera’s LCD screen.
1. Measure the height and width your device’s LCD screen in millimeters.
2. Using a pair of scissors or a razor and a straight edge, trim the screen protector along the guidelines that correspond to your camera’s LCD size.
3. Remove all films or other intervening substances from your camera’s LCD.
4. Clean the LCD with the included wet wipe, and then wipe it dry with the dry wipe. Be sure to remove all dust and fingerprints.
5. Partially peel off the backing from the screen protector. Be careful not to get any fingerprints on the exposed side of the screen protector.
6. Make sure your camera is on a stable surface, and align the screen protector with the camera’s LCD.
Tip: Turning on the
LCD will make it easier to see the edges when aligning the screen protector.
7. Hold the backing of the screen protector up while gently pushing down on the screen protector with the included applicator card. As you push the applicator card along the camera’s LCD to apply the screen protector, the backing will gradually peel off.
8. Use the applicator card to smooth out any remaining air bubbles by pushing them to the edge of the screen protector.
One-Year Limited Warranty
This SENSEI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE
WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Sensei Customer
Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Sensei along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.madebysensei.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SENSEI is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
www.MadebySensei.com
© Copyright 2016 Gradus Group
GG2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project