10 CRM-81J, CRM-83J | CR Single-function time relay
CRM-81J, CRM-83J | Single-function time relay
EAN code
CRM-81J according to type
CRM-83J according to type
Technical parameters
CRM-81J
Functions:
CRM-83J
ZR - delay ON / ZN - delay OFF /
BL- cycler 1:1
Voltage range:
A1 - A2
UNI
Supply terminals:
Burden:
Voltage range:
Consumption (apparent/loss):
• Single-function and single-time relay with fine time setting by a
potentiometer (within the frames of a particular time range).
• Suitable for applications where function and time requirements are
known.
• Time switch, possible to be used for pump delay after switching
heating off, switching of fans.
• Choice of 3 functions:
1) ZR - Delay ON
2) ZN -Delay OFF
3) BL - Repeat Cycle
• Functions can be controlled by supply voltage or time scale control
input
• Choice of 6 time ranges: (0.1 s - 1 s / 1 s - 10 s / 6 s - 60 s / 1 min - 10 min /
6 min - 60 min / 1 h - 10 hrs)
• Universal voltage range AC/DC 12 - 240 V or AC 230 V.
• Output contact: CRM-81J: 1x changeover/ SPDT 16 A
CRM-83J: 3x changeover/ 3PDT 8 A.
• Red LED output indicator.
• 1-MODULE, DIN rail mounting.
AC max. 12 VA / 1.3 W
Description
Supply terminals
Control input “S”
Supply indication
Output indication
Time ranges:
0.1 s - 10 h (in 6 ranges)
Time setting:
potentiometer
Number of functions:
Time setting
Voltage range:
Supply voltage tolerance:
5 % - mechanical setting
Repeat accuracy:
0.2 % - set value stability
Output
Number of contacts:
Number of contacts:
Output contact
Current rating:
Breaking capacity:
Inrush current:
1x chang./ SPDT (AgNi / Silver Alloy) 3x chang./ 3PDT (AgNi / Silver Alloy)
16 A / AC1
4000 VA / AC1, 384 W / DC 2000 VA / AC1, 192 W / DC
30 A / <3 s
10 A / <3 s
Switching voltage:
250 V AC1 / 24 V DC
Output indication:
red LED
Mechanical life:
Electrical life (AC1):
3x107
0.7x105
Control
Consumption of input:
Load between S-A2:
Control terminals:
Glow tubes connetions:
Max. amount of glow lamps
connected to controlling
input:
Impulse length:
Reset time:
Functions
Inrush current:
ZR - Delay ON
ZN - Delay OFF
U
S
U
S
t
U
S
t
t
Yes
UNI - glow lamps cannot connected
CRM-81J
CRM-83J
Un
16 18
+
Un
-
+
-
+
A1 S A2
Un
A1 S A2
(measured with glow lamp 0.68 mA / 230 AC)
max. 150 ms
Electrical strength:
4 kV (supply-output)
Operating position:
any
Max. cable size(mm2):
DIN rail EN 60715
Weight:
Standards:
15 16 18
15 16 18
CRM-81J
A1
(UNI) 62g (2.2 oz.), (230) 60g (2.1 oz) (UNI) 86g (3 oz.), (230) 82g (2.89 oz.)
EN 61812-1, EN 61010-1
3x107
Function
a - Delay OFF (S break) the power
supply is switched off (min.
time is 0.5 s)
0.7x105
U
U
Operating temperature:
-20 °C to 55 °C (-4 °F to 131 °F)
Storage temperature:
-30 °C to 70 °C (-22 °F to 158 °F)
Electrical strength:
4 kV (supply-output)
Operating position:
any
t
t
Connection
Un
DIN rail EN 60715
IP40 from front panel / IP10 terminals
Overvoltage category:
III.
A1
A2
Pollution degree:
2
16
26
18
28
15
25
Max. cable size (mm2):
solid wire max. 2x 2.5 or 1x 4,
Dimensions:
Weight:
Standards:
90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝)
93 g (3.3 oz.)
EN 61812-1, EN 61010-1
Symbol
A2
S A2
e - Off Delay (S break)
16 18 26 28
16 18 26 28 36 38
2
90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝)
Output contact
CRM-83J
16 18
III.
solid wire max.1x2.5 or 2x1.5 / with sleeve max.1x2.5
Output contact
A1
Symbol
A1
Function setting
with sleeve max. 2x 1.5 or 1x 2.5 (AWG 12)
It is possible to connect the load
between terminals S-A2 (e.g. contactor,
pilot lamp or another device), without
compromising the correct operation of
the relay (the load is energized as long
as the switch button is closed).
25 26 28
IP40 from front panel / IP20 terminals
(AWG 12)
Dimensions:
15
10 A / <3 s
Other information
35 36 38
min. 25 ms / max. unlimited
-20 °C to +55 °C (-4 °F to 131 °F)
A2
Fine time setting
8 A / AC1
red LED
Mounting:
Output indication
2000 VA / AC1, 192 W / DC
Output indication:
Electrical life (AC1):
Supply indication
Rough time setting
2x changeover/DPDT (AgNi/ Silver Alloy)
250 V AC1 / 24 V DC
Protection degree:
A1
S load
230 V - max.10 pcs
-30 °C to +70 °C (-22 °F to 158 °F)
Pollution degree:
t t
Connection
A1-S
Storage temperature:
Overvoltage category:
t t t t t
Output contact
0.1 % / °C, at = 20 °C (0.1 % / °F, at = 68 °F)
Switching voltage:
Mechanical life:
t
230 V - Yes / UNI - No
Power of control input:
Protection degree:
t
Note: the function ZR and ZN is controlled by supply voltage and control
input ie. Once phase failure is detected and supply voltage is re applied,
The relay automatically makes one cycle.
Other information
Mounting:
BL - Cycler 1:1
AC 0.025 - 0.2 VA / DC 0.1 - 0.7 W (UNI),
AC 0.53 VA (AC 230 V)
Current rating:
Breaking capacity:
8 A / AC1
green LED
Time deviation:
Temperature coefficient:
Supply terminals
-15 %; +10 %
potentiometer
5 % - mechanical setting
Description
AC 0.7 - 3 VA / DC 0.5 - 1.7 W
Time setting:
0.2 % - set value stability
Output
A1 - A2
AC/DC 12 - 240 V (AC 50 - 60 Hz)
0.1 s - 10 min
Repeat accuracy:
0.01% / °C, at =20 °C (0.01 % / °F, at = 68°F)
a - On Delay (Power On) /
Time ranges:
Time deviation:
Temperature coefficient:
CRM-82TO
• „True OFF“ relay - relay timing without supply voltage.
• Example of use: back-up source for Delay OFF in case of voltage failure
(e.g. emergency lighting, emergency respirator, or protection of el.
controlled doors - in case of fire).
• 2 time functions adjustable by rotary switch:
a - Delayed return after disconnecting of supply.
e - Delayed start.
• Time range (adjustable by rotary switch and fine setting by potentiometer): 0.1 s - 10 min.
• Universal supply voltage AC/DC 12 - 240 V.
• Interruptions in the power supply must take time steps (tens to hundreds of milliseconds).
• Output contact: 2x changeover / DPDT 8 A.
• Output status indicated by red LED (only in case of supply voltage
connection).
• Clamp terminals.
• 1-MODULE, DIN rail mounting.
e - Off Delay (S Break)
Supply indication:
AC max. 12 VA / 1.9 W
green LED
Supply indication:
Technical parameters
Burden:
-15 %; +10 %
Supply voltage tolerance:
EAN code
CRM-82TO /UNI: 8595188137614
Supply terminals:
AC/DC 12 - 240 V (AC 50 - 60 Hz)
AC 230 V / 50 - 60 Hz
11
CRM-82TO | Delay OFF without supply voltage
AC 0.7 - 3 VA / DC 0.5 - 1.7 W
230
10
15
S A2
15
25
35
Example of an order
CRM-81J/230, ZR10s: 1x changeover contact, voltage AC 230 V, function:
delay ON, time 1 - 10 s
CRM-83J/UNI, BL1h: 3x changeover contact, voltage AC/DC 12-240 V,
function: cycler begin with impulse, time 6-60 min
15
25
t
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement