Compact GuardLogix 5370 Star/Ring - Literature Library

Compact GuardLogix 5370 Star/Ring - Literature Library
Stratix 5700 Configuration
• Scalable Layer 2 managed industrial switch
• Default configurations for industrial autom ation and
EtherNet/IP devices (Global and Smartports)
• Includes integrated Device Level Ring (DLR) connectivity
which helps optimize the network architecture.
• Integrated Network Address Translation (NAT) provides
1:1 IP address mapping helping to reduce
commissioning time
• Best of Cisco - Catalyst® switch architecture/ feature set
Compact GuardLogix L30ERMS
5370 Overview
L33ERMS
L36ERMS
Standard Memory
1MB
2MB
3MB
Safety Memory
.5MB
1MB
1.5MB
Total Memory
1.5MB
3MB
4.5MB
Local 1769
Expansion Modules 8
16
30
EtherNet/IP
I/O Nodes
16
32
48
Integrated Motion
1-4 Axis
CIP Motion
1-8 Axis
CIP Motion
1-16 Axis
CIP Motion
PanelView Plus 7
Compact GuardLogix 5370 Performance
• 2 drives/msec (L30ERMS,L33ERMS,L36ERMS)
• Built-in energy storage eliminates the need
for lithium batteries
Compact GuardLogix 5370 Configuration
• Common development environment for all control
disciplines across the entire Logix Family.
• USB Port provides easy access to module and
networks for configuration,and troubleshooting
Compact GuardLogix 5370 Capacity
• Scalable to a wide range of applications (See Table)
• With L30ERMS,L33ERMS,L36ERMS, support for
Integrated Motion on EtherNet/IP provides a cost
effective solution for from 1-16 axis of motion
Plant
Network
Compact GuardLogix 5370
Compact Guard Logix
SAFETY CPU
SFTY RUN
PanelView Plus 7 Capacity
• 512 MB Memory
• Single controller connection
• Up to 25 displays
• Up to 200 alarm messages
• SD storage card slot for data storage, data logging,
recipe management and terminal replication
• USB ports for printer, RFID reader and web
camera support
• Windows CE 6.0 standard features, including email and
text notification and secure FTP server, PDF Viewer
SFTY TASK
Stratix 5700
PowerFlex 527
SFTY OK
IN2
Ref
IN1
Enet LINK
FAULT
1 (Front)
2 (Rear)
L36ERMS
Sel
527
PORT
MOD
NET A
NET B
ArmorBlock
Guard I/O Module
PointGuard I/O
PanelView Plus 7 Performance
• ARM – 1.0 GHz
• Form factor includes sizes from 4" to 15" with wide screen options
• ATEX Zone 2/22 and UL Class 1, Div 2 certification
for use in hazardous environments
Network
Lock
I0
O0
I1
01
I2
02
I3
03
I4
04
I5
05
I6
I7
Module
06
IN
07
ArmorBlock Guard I/O Module Capacity
• Provides PLd-rated, single channel safety
inputs and PLe-rated, dual channel, safety
inputs; safety outputs rated up to PLe
• Available in bipolar and sourcing safety
output configurations
• Supports Device Level Ring and Linear
topologies via an EtherNet/IP embedded
switch
PowerFlex 527
FWD
HERTZ
FAULT
Esc
Sel
X1
FE
527
EtherNet/IP
1769-AENTR
1769 I/O Capacity
• Supports up to 30 1769 I/O Modules (in 3 banks, via extended rack)
• 1769-AENTR EtherNet/IP adapter utilizes embedded
switch technology to support linear or ring topologies
Publication IASIMP-QR038B-EN-P – September 2017
Supersedes Publication IASIMP-QR038_-EN-P – August 2015
EtherNet/IP Network Capacity
• EtherNet/IP utilizes standard
Ethernet TCP/IP technology to allow
you to easily mix and match high speed
Motion control, I/O control, drive
control, and HMI on a single network
Note: Performance is what we tested,
not the max capacity
PowerFlex 527 Capacity
• 5 to 30 HP, 0.4 to 22KW
• 100 to 600V single or 3-phase
• 24vDC digital I/O
• Analog I/O
• Embedded EtherNet/IP
(Linear/Ring with Dual Port Option)
EtherNet/IP Device Level Ring
(DLR) Configuration
• One node is configured to be the
Ring Supervisor
Enet LINK
NODE ADR
X10
EtherNet/IP Device Level Ring
(DLR) Capacity
• Single fault tolerant network
provides resiliency
• ODVA standard supports multivendor
solutions.
Kinetix 5500
P
W
R
OUT
Kinetix 5500 Capacity
• Scalable Single/Multi Axis Design
• 195-528V single phase or 3-phase
• 600W – 14.6kW
• Embedded 2 Port EtherNet/IP supports
Linear/Ring topologies
Kinetix 5500 Configuration
• Full integrated motion support for Kinetix350, Kinetix 5500, Kinetix 6500,
and PowerFlex 755 using EtherNet/IP
• Studio 5000 Logix Designer common integrated motion programming,
configuration, commissioning, and drive diagnostic & maintenance tools.
• Built-in Hardwired Safe Torque-off, SIL CL2, PLe, Cat 3. (ISO 13849)
• Built-in Integrated Safety on EtherNet/IP (Safe Torque Off) SIL CL3, PLe,
Cat 3 (ISO13849)
Kinetix 5500 Performance
• High speed registration input on
Kinetix drive can trigger a motion
task in Studio 5000 Logix Designer
for faster event task performance
Com
HERTZ
PanelView Plus 7 Configuration
• Complementary to CompactLogix 5370 controllers
• Faceplates and AOIs
• Single Development Environment
POINT I/O Capacity
•The maximum is 63 POINT I/O modules
per adapter
• 1734-AENTR EtherNet/IP adapter utilizes
embedded switch technology to support linear or
ring topologies
• Mix safety inputs and outputs with standard
POINT I/O, all with one node
SFTY LOCK
FWD
Esc
Machine Safety
SIL 3(According to EN62061/EN 61511-1/IEC 61508),
PLe (According to EN ISO 13849-1),
Cat 4(According to EN ISO 13849-1),
1 out of 2(1OO2) Hardware Structure
PORT
MOD
NET A
NET B
EtherNet/IP Device Level Ring
(DLR) Performance
• High performance network
recovery - validated at 3msec or
less for up to 50 nodes.
PowerFlex 527 Performance
• V/Hz, SVC, PM, Economizer
• Embedded EMC Filter for 1ph 240V & 3ph, 480V
• Built-in Hardwired Safe Torque-off, SIL3, PLe, Cat 3. (ISO 13849-1)
• Built-in Integrated Safety on EtherNet/IP (Safe Torque Off) SIL CL3,
PLe, Cat 3 (ISO13849)
• Closed Loop Feedback allows Positioning Capability (Encoder Card Option)
PowerFlex 527 Configuration
• Innovative LCD Display
• Studio 5000 Logix Designer
Programming with AOPs
Compact GuardLogix 5370 Star/Ring
Bill of Material
Qty Catalog #
Description
System: Controller Hardware
1
1
1
1
1
1769-L36ERMS
1769-IA16
1769-OB16
1769-PA2
COMPACT GUARDLOGIX 5370
PROCESSOR 3MB MEMORY
16 Point 120 VAC Input Module
16 Point 24 VDC Sourcing Output Module
85-265 VAC POWER SUPPLY
(5V @ 10 AMP)
System: Communication Hardware
1783-BMS06TL
2 2198-H003-ERS
STRATIX 5700 MANAGED SWITCH 6 FAST ETHERNET COPPER PORTS
1
Distributed I/O Hardware - POINT I/O
1734-AENTR
1734 DUAL PORT ETHERNET/IP ADAPTER
FIELD POTENTIAL DISTRIBUTOR
24V DC 8 Input Safety Module
24V DC 8 Output Safety Module
MODULE BASE W/ REMOVABLE
IEC SCREW TERMINALS
85-264V AC TO 24V DC 1.3A
POWER SUPPLY
1 1734-FPD
1 1734-IB8S 1 1734-OB8S 4 1734-TB 1 1794-PS13 Distributed I/O Hardware - 1769 I/O
Motion Hardware
KINETIX 5500 2.5Amps (RMS)
2 VPL-A1002A-CJ12AS KINETIX VP LOW INERTIA MOTOR,
IEC 100mm FRAME SIZE,
1500 RPM RATED SPEED
Single-Cable Technology - One cable between VPL Motor and Kinetix
5500 drive yields simplification and reduces costs. One cable for feedback, motor brake, and motor power.
1 1585J-M8CBJM-1 SHIELDED ETHERNET CABLE
FOR CIP DRIVES, 1 METER
1 1585J-M8CBJM-0M3 SHIELDED ETHERNET CABLES
FOR CIP DRIVES, .3 METERS
Note: Catalog numbers consist of characters, each of which
identifies a specific version or option for that component. Reference
Publication GMC-SG001-EN-E Kinetix Motion Control Selection Guide
for additional information
Drive Hardware
1 25C-B5P0N104 POWERFLEX 527 DRIVE,1 HP FRAME A
Note: PowerFlex drives come in many variations - before ordering,
you will need to identify voltage rating, horsepower, enclosure type.
Please refer to the PowerFlex Selection Guide for additional details on
selecting the right drive for you application.
HMI Hardware
Logix Controllers
1 2711P-T10C21D8S PANELVIEW PLUS 7 STANDARD
TERMINAL, TOUCH SCREEN, 10.4 INCHES, TFT COLOR, SINGLE
ETHERNET, 24V DC, WINDOWS CE OS LICENSE, STANDARD MODEL
1 1769-AENTR
1 1769-PA2 1 1769-IQ16
ETHERNET IP ADAPTER
POWER SUPPLY 120/240 VAC INPUT
2 AMP @ 5 VDC OUTPUT
16 POINT 24 VDC SINKING/SOURCING
INPUT MODULE
1 1769-OB16
16 POINT 24 VDC SOURCING OUTPUT MODULE
1 1769-IF4XOF2 8 BIT RESOLUTION, HIGH SPEED
4 IN/2 OUT ANALOG COMB
1 1769-ECR
RIGHT END CAP/TERMINATOR
Distributed I/O Hardware - ArmorBlock Guard I/O
1 1732ES-IB12XOB4 ETHERNET/IP SAFETY ARMOR
BLOCK INPUT MODULE, 12 INPUTS, 4 SOLID STATE SOURCING OUTPUTS
Recommended Software
1 9324-RLD200INTL STUDIO 5000 LOGIX DESIGNER MINI INTERNATIONAL
Note: ControlLogix Controllers can also be programmed when using
Studio 5000 Logix Designer Standard, Full, or Pro.
1 9701-VWSTENE
FACTORYTALK VIEW STUDIO FOR
FACTORYTALK VIEW
Note: You will need to purchase the FactoryTalk View runtime in
addition to the studio if you upgrade from PanelView Plus to the
VersaView PC.
About this Configuration
This Compact GuardLogix 5370 based low cost system demonstrates the power and scalability of the
Integrated Architecture on an EtherNet/IP based network. This system utilizes standard EtherNet technology
to allow you to easily mix and match high speed Motion control, I/O control, drive control, and HMI on a single
EtherNet/IP network.
A key advantage of this architecture is the ability to use Studio 5000 Logix Designer common integrated
motion programming,configuration, commissioning, and motion tools for the Kinetix 350, Kinetix 5500,
Kinetix 6500 and PowerFlex 755 family of products.
About the Products
• A common set of controls, networks, and programming software available in multiple hardware platforms
• Multiple control disciplines in a single controller - sequential / motion / drives / process
• Multiple Program Languages available in all controllers - Ladder Diagram, Function Block, Structured
Text, and Sequential Function Chart
• Tag-based architecture instead of addresses native in the controller
PanelView Plus 7­­­­
• Includes sizes from 4...15 with wide screen options
• Uses Windows CE 6.0 standard features
• Offers Ethernet communications for integration from the machine to the enterprise
• Includes increased memory of 512 MB flash memory/512 MB RAM which provides greater flexibility in applications
•Monitors applications from a remote location with VNC connectivity
PowerFlex Drives
• Serves applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp).
• Common set of networks, operator interface and programming for all PowerFlex drives
• Communication Options – Ethernet/IP, ControlNet, Devicenet, DH Plus, RIO, 3rd party networks
• Hundreds of pieces of status and diagnostic information are shared with Logix controllers directly
Kinetix Servos
• Scalable solution for applications from 100W to 112KW
• Integrated platform to simplify machine design and commissioning
• Smart Motor Technology to provide automatic identification of correct motor-to-drive connectivity
• Kinematics Integrated Motion Solution for Robot Control utilizes standard Logix/Kinetix
integrated motion technology
POINT Guard I/O™
• Mix safety inputs and outputs with standard POINT I/O, all with one node.
• Easy configuration by using RSLogix 5000 with full support of IP addressing.Optimize installations by
assigning individual test output for safety input device.
• Connect single and dual-channel safety devices on inputs and outputs.
• Certified by TÜV for Functional Safety up to SIL CL 3 according to IEC 61508, and PLe/Category 4,
according to ISO 13849-1.
• Muting lamp control and monitoring on selected test pulse outputs
• Supports EtherNet/IP, DeviceNet and 3rd party networks
ArmorBlock Guard I/O
• Provides PLd-rated, single channel safety inputs and PLe-rated, dual channel, safety inputs; safety outputs rated up to PLe
•Available in bipolar and sourcing safety output configurations
•Supports Device Level Ring and Linear topologies via an EtherNet/IP embedded switch
Stratix Switches and Network Infrastructure
• Stratix 6000, 5700 and 8000 Managed switches offer Loop Prevention, Security Services, Diagnostic
Information, Segmentation Services(VLANs), Prioritization Services(QoS), and Multicast Management Services.
• Stratix 2000 Unmanaged Switches offer no layer 2 or layer 3 management functionality, but offer lower cost.
• Consider Network Address Translation (NAT), available with the 9300-ENA NAT device and the
Stratix 5700 with NA­­T option, depending on your application requirements.
For More Information and Help
For more information contact your local distributor or Rockwell Automation sales representative.
• www.ab.com ( Product Directory, Publication Library, Technical Support)
Stratix 5700 Configuration
• Scalable Layer 2 managed industrial switch
• Default configurations for industrial autom ation and
EtherNet/IP devices (Global and Smartports)
• Includes integrated Device Level Ring (DLR) connectivity
which helps optimize the network architecture.
• Integrated Network Address Translation (NAT) provides
1:1 IP address mapping helping to reduce
commissioning time
• Best of Cisco - Catalyst® switch architecture/ feature set
PanelView Plus 7
Plant
Network
PanelView Plus 7 Capacity
• 512 MB Memory
• Single controller connection
• Up to 25 displays
• Up to 200 alarm messages
• SD storage card slot for data storage, data logging,
recipe management and terminal replication
• USB ports for printer, RFID reader and web camera support
• Windows CE 6.0 standard features, including email and
text notification and secure FTP server, PDF Viewer
L33ERMS
L36ERMS
Standard Memory
1MB
2MB
3MB
Safety Memory
.5MB
1MB
1.5MB
Total Memory
1.5MB
3MB
4.5MB
Local 1769
Expansion Modules 8
16
30
EtherNet/IP
I/O Nodes
16
32
48
Integrated Motion
1-4 Axis
CIP Motion
1-8 Axis
CIP Motion
1-16 Axis
CIP Motion
EtherNet/IP Network Capacity
• EtherNet/IP utilizes standard
Ethernet TCP/IP technology to allow
you to easily mix and match high speed
Motion control, I/O control, drive
control, and HMI on a single network
Compact GuardLogix 5370 Configuration
• Common development environment for all control
disciplines across the entire Logix Family.
• USB Port provides easy access to module and
networks for configuration,and troubleshooting
Compact Guard Logix
SAFETY CPU
SFTY RUN
SFTY TASK
SFTY LOCK
SFTY OK
1769 I/O Capacity
• Supports up to 30 1769 I/O Modules
(in 3 banks, via extended rack)
• 1769-AENTR EtherNet/IP adapter
utilizes embedded switch technology
to support linear or ring topologies
Ref
IN1
1 (Front)
2 (Rear)
EtherNet/IP
PowerFlex 527
FWD
L36ERMS
POINT I/O Capacity
•The maximum is 63 POINT I/O modules
per adapter
• 1734-AENTR EtherNet/IP adapter
utilizes embedded switch technology
to support linear or ring topologies
Kinetix 5500
PointGuard I/O
HERTZ
Compact GuardLogix 5370 Capacity
• Scalable to a wide range of applications (See Table)
• With L30ERMS, L33ERMS, L36ERMS, support for
Integrated Motion on EtherNet/IP provides a cost
effective solution for from 1-16 axis of motion
Compact GuardLogix 5370
ArmorBlock
Guard I/O Module
Enet LINK
FAULT
Esc
1769-AENTR
Sel
Network
Lock
I0
O0
I1
01
I2
02
I3
03
I4
04
I5
PORT
MOD
NET A
NET B
I7
Module
05
I6
PowerFlex 527 Capacity
• 5 to 30 HP, 0.4 to 22KW
• 100 to 600V single or 3-phase
• 24vDC digital I/O
• Analog I/O
• Embedded EtherNet/IP (Linear/Ring with Dual Port Option)
Publication IASIMP-QR038A-EN-P – September 2017
Supersedes Publication IASIMP-QR038_-EN-P – August 2015
Machine Safety
SIL 3(According to EN62061/EN 61511-1/IEC 61508),
PLe (According to EN ISO 13849-1),
Cat 4(According to EN ISO 13849-1),
1 out of 2(1OO2) Hardware Structure
IN2
527
PowerFlex 527 Performance
• V/Hz, SVC, PM, Economizer
• Embedded EMC Filter for 1ph 240V & 3ph, 480V
• Built-in Hardwired Safe Torque-off, SIL3, PLe, Cat 3. (ISO 13849-1)
• Built-in Integrated Safety SIL3, PLe, Cat 3. (ISO 13849-1)
• Closed Loop Feedback allows Positioning Capability (Encoder Card Option)
Compact GuardLogix 5370 Performance
• 2 drives/msec (L30ERMS, L33ERMS, L36ERMS)
• Built-in energy storage eliminates the need
for lithium batteries
Com
PanelView Plus 7 Configuration
• Complementary to CompactLogix 5370 controllers
• Faceplates and AOIs
• Single Development Environment
PanelView Plus 7 Performance
• ARM – 1.0 GHz
• Form factor includes sizes from 4" to 15" with wide screen options
• ATEX Zone 2/22 and UL Class 1, Div 2 certification for use in
hazardous environments
Compact GuardLogix L30ERMS
5370 Overview
06
IN
07
NODE ADR
P
W
R
OUT
FE
PowerFlex 527 Configuration
• Innovative LCD Display
• Studio 5000 Logix Designer
Programming with AOPs
Note: Performance is what we tested,
not the max capacity
Kinetix 5500 Capacity
• Scalable Single/Multi Axis Design
• 195-528V single phase or 3-phase
• 600W – 14.6kW
• Embedded 2 Port EtherNet/IP supports
Linear/Ring topologies
X10
X1
ArmorBlock Guard I/O Module Capacity
• Provides PLd-rated, single channel
safety inputs and PLe-rated, dual
channel, safety inputs; safety
outputs rated up to PLe
• Available in bipolar and sourcing
safety output configurations
• Supports Device Level Ring and
Linear topologies via an EtherNet/IP
embedded switch
Kinetix 5500 Configuration
• Full integrated motion support for Kinetix350, Kinetix 5500,
Kinetix 6500, and PowerFlex 755 using EtherNet/IP
• Studio 5000 Logix Designer common integrated motion
programming,configuration, commissioning, and drive
diagnostic & maintenance tools.
• Built-in Hardwired Safe Torque-off, SIL CL2, PLe, Cat 3.
(ISO 13849)• Built-in Integrated Safety SIL CL3, PLe,
Cat 3. (ISO 13849)
Kinetix 5500 Performance
• High speed registration input
on Kinetix drive can trigger a
motion task in Studio 5000
Logix Designer for faster
event task performance
Compact GuardLogix 5370 Star/Linear
Bill of Material
Qty Catalog #
Description
System: Controller Hardware
1
1
1
1
1
1769-L36ERMS
1769-IA16
1769-OB16
1769-PA2
COMPACT GUARDLOGIX 5370
PROCESSOR 3MB MEMORY
16 Point 120 VAC Input Module
16 Point 24 VDC Sourcing Output Module
85-265 VAC POWER SUPPLY
(5V @ 10 AMP)
System: Communication Hardware
1783-BMS06TL
2 2198-H003-ERS
STRATIX 5700 MANAGED SWITCH 6 FAST ETHERNET COPPER PORTS
1
Distributed I/O Hardware - POINT I/O
1734-AENTR
1734 DUAL PORT ETHERNET/IP ADAPTER
FIELD POTENTIAL DISTRIBUTOR
24V DC 8 Input Safety Module
24V DC 8 Output Safety Module
MODULE BASE W/ REMOVABLE
IEC SCREW TERMINALS
85-264V AC TO 24V DC 1.3A
POWER SUPPLY
1 1734-FPD
1 1734-IB8S 1 1734-OB8S 4 1734-TB 1 1794-PS13 Distributed I/O Hardware - 1769 I/O
Motion Hardware
KINETIX 5500 2.5Amps (RMS)
2 VPL-A1002A-CJ12AS KINETIX VP LOW INERTIA MOTOR,
IEC 100mm FRAME SIZE,
1500 RPM RATED SPEED
Single-Cable Technology - One cable between VPL Motor and Kinetix
5500 drive yields simplification and reduces costs. One cable for feedback, motor brake, and motor power.
1 1585J-M8CBJM-1 SHIELDED ETHERNET CABLE
FOR CIP DRIVES, 1 METER
1 1585J-M8CBJM-0M3 SHIELDED ETHERNET CABLES
FOR CIP DRIVES, .3 METERS
Note: Catalog numbers consist of characters, each of which
identifies a specific version or option for that component. Reference
Publication GMC-SG001-EN-E Kinetix Motion Control Selection Guide
for additional information
Drive Hardware
1 25C-B5P0N104 POWERFLEX 527 DRIVE,1 HP FRAME A
Note: PowerFlex drives come in many variations - before ordering,
you will need to identify voltage rating, horsepower, enclosure type.
Please refer to the PowerFlex Selection Guide for additional details on
selecting the right drive for you application.
HMI Hardware
Logix Controllers
1 2711P-T10C21D8S PANELVIEW PLUS 7 STANDARD
TERMINAL, TOUCH SCREEN, 10.4 INCHES, TFT COLOR, SINGLE
ETHERNET, 24V DC, WINDOWS CE OS LICENSE, STANDARD MODEL
1 1769-AENTR
1 1769-PA2 1 1769-IQ16
ETHERNET IP ADAPTER
POWER SUPPLY 120/240 VAC INPUT
2 AMP @ 5 VDC OUTPUT
16 POINT 24 VDC SINKING/SOURCING
INPUT MODULE
1 1769-OB16
16 POINT 24 VDC SOURCING OUTPUT MODULE
1 1769-IF4XOF2 8 BIT RESOLUTION, HIGH SPEED
4 IN/2 OUT ANALOG COMB
1 1769-ECR
RIGHT END CAP/TERMINATOR
Distributed I/O Hardware - ArmorBlock Guard I/O
1 1732ES-IB12XOB4 ETHERNET/IP SAFETY ARMOR
BLOCK INPUT MODULE, 12 INPUTS, 4 SOLID STATE SOURCING OUTPUTS
Recommended Software
1 9324-RLD200INTL STUDIO 5000 LOGIX DESIGNER MINI INTERNATIONAL
Note: ControlLogix Controllers can also be programmed when using
Studio 5000 Logix Designer Standard, Full, or Pro.
1 9701-VWSTENE
FACTORYTALK VIEW STUDIO FOR
FACTORYTALK VIEW
Note: You will need to purchase the FactoryTalk View runtime in
addition to the studio if you upgrade from PanelView Plus to the
VersaView PC.
About this Configuration
This Compact GuardLogix 5370 based low cost system demonstrates the power and scalability of the Integrated
Architecture on an EtherNet/IP based network. This system utilizes standard EtherNet technology to allow
you to easily mix and match high speed Motion control, I/O control, drive control, and HMI on a single
EtherNet/IP network.
A key advantage of this architecture is the ability to use Studio 5000 Logix Designer common integrated
motion programming,configuration, commissioning, and motion tools for the Kinetix 350, Kinetix 5500,
Kinetix 6500 and PowerFlex 755 family of products.
About the Products
• A common set of controls, networks, and programming software available in multiple hardware platforms
• Multiple control disciplines in a single controller - sequential / motion / drives / process
• Multiple Program Languages available in all controllers - Ladder Diagram, Function Block, Structured
Text, and Sequential Function Chart
• Tag-based architecture instead of addresses native in the controller
PanelView Plus 7­­­­
• Includes sizes from 4...15 with wide screen options
• Uses Windows CE 6.0 standard features
• Offers Ethernet communications for integration from the machine to the enterprise
• Includes increased memory of 512 MB flash memory/512 MB RAM which provides greater flexibility in applications
•Monitors applications from a remote location with VNC connectivity
PowerFlex Drives
• Serves applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp).
• Common set of networks, operator interface and programming for all PowerFlex drives
• Communication Options – Ethernet/IP, ControlNet, Devicenet, DH Plus, RIO, 3rd party networks
• Hundreds of pieces of status and diagnostic information are shared with Logix controllers directly
Kinetix Servos
• Scalable solution for applications from 100W to 112KW
• Integrated platform to simplify machine design and commissioning
• Smart Motor Technology to provide automatic identification of correct motor-to-drive connectivity
• Kinematics Integrated Motion Solution for Robot Control utilizes standard Logix/Kinetix
integrated motion technology
POINT Guard I/O™
• Mix safety inputs and outputs with standard POINT I/O, all with one node.
• Easy configuration by using RSLogix 5000 with full support of IP addressing.Optimize installations by
assigning individual test output for safety input device.
• Connect single and dual-channel safety devices on inputs and outputs.
• Certified by TÜV for Functional Safety up to SIL CL 3 according to IEC 61508, and PLe/Category 4,
according to ISO 13849-1.
• Muting lamp control and monitoring on selected test pulse outputs
• Supports EtherNet/IP, DeviceNet and 3rd party networks
ArmorBlock Guard I/O
• Provides PLd-rated, single channel safety inputs and PLe-rated, dual channel, safety inputs; safety outputs rated up to PLe
•Available in bipolar and sourcing safety output configurations
•Supports Device Level Ring and Linear topologies via an EtherNet/IP embedded switch
Stratix Switches and Network Infrastructure
• Stratix 6000, 5700 and 8000 Managed switches offer Loop Prevention, Security Services, Diagnostic
Information, Segmentation Services(VLANs), Prioritization Services(QoS), and Multicast Management Services.
• Stratix 2000 Unmanaged Switches offer no layer 2 or layer 3 management functionality, but offer lower cost.
• Consider Network Address Translation (NAT), available with the 9300-ENA NAT device and the
Stratix 5700 with NA­­T option, depending on your application requirements.
For More Information and Help
For more information contact your local distributor or Rockwell Automation sales representative.
• www.ab.com ( Product Directory, Publication Library, Technical Support)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement