POWER TOOLS

POWER TOOLS
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Angle Grinder Parts & Accessories � � � � � � � � � � � � � � �527
Angle Grinders Corded � � � � � � � � � � � � � � � � � � � � 527-528
Angle Grinders Cordless � � � � � � � � � � � � � � � � � � � � � � �532
Auger Drill Bits� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �513
Band Saw Parts & Accessories� � � � � � � � � � � � � � � 501-502
Band Saws Corded � � � � � � � � � � � � � � � � � � � � � � � � � � 502
Band Saws Cordless� � � � � � � � � � � � � � � � � � � � � � � 503-504
Band Saws Horizontal/Vertical � � � � � � � � � � � � � � � � � 504
Batteries, Cordless Tool � � � � � � � � � � � � � � � � � � � � � � � 500
Battery Chargers � � � � � � � � � � � � � � � � � � � � � � � � � � � � 501
Belt Sanders Corded � � � � � � � � � � � � � � � � � � � � � � � � � �535
Bench Grinder Parts & Accessories � � � � � � � � � � � � � � �533
Bench Grinders � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �533
Carbide Burs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �513
Chop & Cut-Off Saw Parts & Accessories � � � � � �504-505
Chop & Cut-Off Saws Corded � � � � � � � � � � � � � � � 505-507
Chucks & Keys � � � � � � � � � � � � � � � � � � � � � � � � � � � 513-514
Circular Saw Parts & Accessories� � � � � � � � � � � � � 507-508
Circular Saws Corded� � � � � � � � � � � � � � � � � � � � � � � � � 508
Combo Kits Cordless � � � � � � � � � � � � � � � � � � � � � �539-540
Coring Parts & Accessories � � � � � � � � � � � � � � � � � 512-513
Coring Rigs & Motors � � � � � � � � � � � � � � � � � � � � � � � � �513
Crimper Parts & Accessories � � � � � � � � � � � � � � � � � � � �512
Cut-Out Tools Cordless � � � � � � � � � � � � � � � � � � � � � � � 508
Die Grinders Corded � � � � � � � � � � � � � � � � � � � � � � � � � 534
Disc Sander Parts & Accessories � � � � � � � � � � � � � � � � �535
Drill Bit Sharpeners � � � � � � � � � � � � � � � � � � � � � � � � � � �514
Drill Parts & Accessories � � � � � � � � � � � � � � � � � � � � � � �514
Drill Presses Corded� � � � � � � � � � � � � � � � � � � � � � � � � � �512
© 2016
Drills Corded � � � � � � � � � � � � � � � � � � � � � � � � � � � � 518-519
Drills Cordless � � � � � � � � � � � � � � � � � � � � � � � � � � � 520-521
Engravers Corded � � � � � � � � � � � � � � � � � � � � � � � � � � � �527
Hammer Drill Bits� � � � � � � � � � � � � � � � � � � � � � � � � � � � 536
Heat Guns Corded � � � � � � � � � � � � � � � � � � � � � � � � � � � �537
Hole Saw Sets � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �514
Hole Saws � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 514-515
Impact Drivers Cordless� � � � � � � � � � � � � � � � � � � � � � � 523
Impact Wrenches Corded � � � � � � � � � � � � � � � � � � � � � �524
Impact Wrenches Cordless � � � � � � � � � � � � � � � � � � � � �525
Jig Saws Corded � � � � � � � � � � � � � � � � � � � � � � � � � � � � 509
Power Bits � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �515
Reciprocating Saw Parts & Accessories � � � � � � � � � � � �510
Reciprocating Saws Corded � � � � � � � � � � � � � � � � � 510-511
Reciprocating Saws Cordless � � � � � � � � � � � � � � � � � � � �511
Rotary Hammers Corded � � � � � � � � � � � � � � � � � � � � � � 536
Rotary Hammers Cordless � � � � � � � � � � � � � � � � � � � � � 536
Rotary Tool Parts & Accessories � � � � � � � � � � � � � � � � �535
Rotary Tools Corded � � � � � � � � � � � � � � � � � � � � � � � � � �535
Screwdrivers Corded � � � � � � � � � � � � � � � � � � � � � � � � � 522
Screwdrivers Cordless � � � � � � � � � � � � � � � � � � � � � � � � 523
Soldering Iron Parts & Accessories � � � � � � � � � � � � � � 538
Soldering Irons Cordless � � � � � � � � � � � � � � � � � � � 538-539
Soldering Stations Corded � � � � � � � � � � � � � � � � � � � � � 539
Step Drill Bit Sets � � � � � � � � � � � � � � � � � � � � � � � � � � � � �515
Step Drill Bits � � � � � � � � � � � � � � � � � � � � � � � � � � � � 515-516
Straight Grinders Corded � � � � � � � � � � � � � � � � � � � 534-535
Twist Drill Bit Sets � � � � � � � � � � � � � � � � � � � � � � � � 516-517
Twist Drill Bits � � � � � � � � � � � � � � � � � � � � � � � � � � � 517-518
1.800.678.6577
499
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
CORDLESS TOOL BATTERIES & CHARGERS
Batteries, Cordless Tool
20V MAX* Lithium Ion
Batteries
XRP™ Rechargeable Battery Packs
Features:
• Extended run‑time battery provides
performance and long battery life.
• No memory and virtually no
self‑discharge for maximum productivity and less downtime.
Batt. Type: Lithium Ion
Height: 3 5/8 in
Length: 9 1/4 in
Width: 7 in
SKU
115‑DCB200‑2
Features:
• High capacity with more run‑time than standard batteries.
• Allows users to run multiple tools off of the same battery pack.
• Durable, long life.
SKU
115‑DC9091
115‑DC9096
115‑DC9096‑2
Voltage
14.4 V
18 V
18 V
Type
Battery Pack
Battery Pack
Battery Combo Pack
Voltage
20 V
LXT Batteries
POWER TOOLS
Extended Run-Time
Batteries
Features:
• Durable slide rail interface
keeps battery securely in
place even during the most
extreme applications.
• FAN COOLED technology cools down battery
quickly thus extending battery life.
• Fan‑cooled battery and charger technology increases
run‑time and number of recharges.
• High capacity XR+™ pack battery offers extended run‑time
without sacrificing number of recharges.
• Powers entire DEWALT® line of 24V tools.
Batt. Type: NiCad
For Model: DW0246; DW0249
Style: High Capacity
SKU
115‑DW0242
Voltage
24.00 V
Features:
• 5x lower self‑discharge keeps battery
cells active and ready‑for‑use, even
after long periods of storage.
• Battery’s built‑in Memory Chip
communicates with the charger to
maximize battery life using 3 Active Controls (Current, Voltage & Thermal).
• Built‑in shock absorbing features protect the battery.
• LXT Lithium‑Ion battery and optimum charging system
produces 280% total lifetime work with 2x more cycles.
Batt. Type: Lithium‑Ion
SKU
458‑BL1830
Batt. Cap.
3 A‑h
Batt. Cap.
2.4 A‑h
XRP® Li-Ion Batteries
Features:
• XRP™ Li‑Ion extended run‑time battery
provides long run‑time & battery life.
• Lightweight design.
• No memory and virtually no self‑discharge for
maximum productivity and less downtime.
Batt. Type: Lithium Ion
SKU
115‑DC9182
Voltage
18V
Rechargeable Batteries
Batt. Cap.
2 A‑h
Features:
• Ni‑MH batteries have longer run‑time than
standard Nickel Cadmium batteries.
• Able to use multiple tools with same battery.
• Ergonomic design.
Batt. Type: NiMH
Style: Pod
SKU
458‑193159‑1
500
ORSNASCO.COM
Voltage
18 V
Batt. Cap.
2.6 A‑h
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Battery Chargers
1-Hour Chargers
18V XC High Capacity Batteries
Features:
• Battery fuel gauge
indicates how much charge is in the battery.
• Cord wrap provides improved cord storage.
Features:
• Battery fuel gauge displays remaining run‑time.
• Increased run‑time with 40% less weight than
an 18V NiCad battery.
Batt. Type: Lithium Ion
SKU
495‑48‑11‑1828
SKU
115‑DC9310
Batt. Charging Cap.
7 1/5 ‑ 18 Volt
CUTTING TOOLS
Voltage
18 VDC
Band Saws
28V Batteries
Features:
• Provides optimized performance and overload
protection using total system communication
between tool, battery and charger.
• Offers long‑lasting performance and durability.
• Fuel gauge onboard: Displays
remaining runtime for less downtime on the job.
Batt. Type: Lithium‑Ion
SKU
495‑48‑11‑2830
Voltage
28 VDC
Powerband Matrix II HSS
Bi-Metal Portable Bandsaw Blades
Batt. Cap.
3 A‑h
Features:
• Delivers up to 2X more runtime, 20% more power and 2X
more recharges than standard lithium‑ion batteries.
• The M18™ REDLITHIUM™ XC 4.0 Extended
Capacity Battery Pack features superior pack
construction, electronics and performance to
deliver more work per charge and more work
over pack life than any battery on the market.
• It offers 4.0 amp‑hours of runtime.
• With Milwaukee durability built into
each pack, this battery runs cooler and
performs in climates below 0° F.
• Managed by Milwaukee’s exclusive
REDLINK™ Intelligence, the battery features overload protection to
prevent you from damaging your cordless power tools in heavy‑duty
situations, while the discharge protection prevents cell damage.
• The temperature management system and individual
cell monitoring help maximize battery life.
• Switch to the REDLITHIUM 4.0 XC Extended Battery Pack to instantly
upgrade the runtime and durability of your Milwaukee M18 cordless tools.
For Model: M18 Tools
Style: Slide‑on
Height: 3.31 in
Length: 6.11 in
Width: 6.81 in
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 501
Voltage
18 V
Batt. Cap.
4.A‑h
Features:
• Cuts harder materials.
• Fits Black & Decker, Greenlee, Milwaukee, Rockwell, Ridgid,
Porter‑Cable, Skil, and Unitec machine models.
• For general purpose cutting on portable bandsaw machines.
• Ready‑to‑ use.
• Welded length.
Cutting Edge Material: HSS
Applicable Materials: Soft/Medium Materials; Stainless Steel; Hard Steel
SKU
681‑15708
681‑14601
681‑14602
Teeth Per Inch
10; 14
14
18
Width
1/2 in
1/2 in
1/2 in
POWER TOOLS
M18™ REDLITHIUM™ XC 4.0 Extended
Capacity Battery Packs
SKU
495‑48‑11‑1840
Batt. Type
NiCad; NiMH; Lithium‑Ion; Except Univolt
Thickness
0.02 in
0.02 in
0.02 in
Master-Band® Band
Premium Band Saw Blades
Features:
• Thicker and with the Tuff
Tooth™ design for the toughest cutting applications.
• Enhanced beam strength that reduces blade deflection and twist.
• 8% cobalt high‑speed cutting edge resists higher cutting temperature.
• An additional 30% in width of the tool steel tooth makes for stronger
teeth and less tooth strippage on most difficult cutting applications.
Width: 1/2 in
Thickness: 0.023 in
Cutting Edge Material: HSS‑E (Co‑M42)
Applicable Materials: Most Metals
SKU
433‑80116
433‑80112
433‑80114
1.800.678.6577
Cutting Cap.
3/32 in ‑ 1/4 in
1/8 in ‑ 5/16 in
1/4 in ‑ 1/4 in
Cutting Length
44 7/8 in
44 7/8 in
44 7/8 in
Teeth Per Inch
18
14/18
10‑14
501
5/10/16 10:31 AM
POWER TOOLS
Industrial
Oilfield
Construction
Features:
• Made of durable rubber.
• Easy slide‑on installation.
Test & Approvals: Complies with OSHA and UL
Requirements
Features:
• High speed steel teeth provide a
strong, long lasting cutting edge.
• Bi‑metal blades bend and resist
breaking and extend blade life.
• Professional performance and
competitive pricing provide extraordinary cost‑per‑cut value.
Thickness: 0.02 in
Cutting Edge Material: HSS‑E (Co‑M42)
Applicable Materials: Most Metals
Cutting Length Teeth Per Inch
44 7/8 in
18
44 7/8 in
14/18
Welding
Replacement Blade
Pulley Tires
Wolf-Band® Portable Band Saw Blades
SKU
Cutting Cap.
433‑38425 3/32 in ‑ 1/4 in
433‑38427 1/8 in ‑ 5/16 in
Safety
SKU
495‑45‑69‑0010
Width
0.3 in
Width
1/2 in
1/2 in
Heavy-Duty Deep Cut Porta-Band® Saws
Master Cobalt® Portable Band Saw Blades
POWER TOOLS
Features:
• Shock resistant teeth great for
cutting machinable metals.
• Straight pitch teeth for better
chip clearance and fast cutting.
• High resistance to heat and wear.
Width: 1/2 in
Thickness: 0.02 in
Cutting Edge Material: HSS
SKU
497‑ZWEP4418W
Cutting Teeth Per
Length
Inch
44 7/8 in
497‑ZWEP441418MC 44 7/8 in
18
14/18
Style
Applicable Materials
Standard
Most Metals; Stainless Steel
Pitch
Variable
Most Metals
Pitch
Features:
• Dual bearing blade guide rollers increase
durability in the blade support system.
• AC/DC switch use in both alternating and direct current.
• Blade tracking adjustment increases blade life
by providing better blade tracking.
• Speed control knobs allows user to tailor the
blade speed for various applications.
Blade Thickness: 0.02 in
Linear Speed: 100 ft/min ‑ 245 ft/min
Amps: 6 A
Voltage Type: AC/DC
Handle Type: Pommel Front Handle
Width: 21 1/2 in
SKU
115‑DW328
Cutting Cap.
4‑1/2 x 4‑3/4 in Round; 4‑3/4 in Rectangular
Blade Length
44 7/8 in
Heavy-Duty Deep Cut Variable
Speed Band Saws
Band Saw Blades
Features:
• Bi‑Metal blades outlast conventional blades
up to 3 times, requiring fewer blade changes.
• Designed with varying set angles and
gullet depths to break up the harmonic vibrations generated in cutting,
resulting in smoother, quieter cutting and longer blade life.
• Extremely hard and uniform tooth point is electron beam welded to a
tough, durable backing, with high life for faster cutting, longer blade life.
• For cutting common materials 5/32” ‑ 3/16” thick
and very hard materials 3/16” ‑ 5/16” thick.
Cutting Edge Material: HSS‑E (Co‑M42)
Applicable Materials: Non‑Ferrous Soft Metal; Stainless Steel; Soft/Medium
Steel; Non‑Ferrous Soft Metal; Soft/Medium Steel; Stainless Steel
SKU
495‑48‑39‑0511
495‑48‑39‑0521
495‑48‑39‑0551
502
Length
44 7/8 in
44 7/8 in
44 7/8 in
Teeth Per Inch
14
18
14‑Oct
Width
1/2 in
1/2 in
1/2 in
Thickness
0.02 in
0.02 in
Features:
• Rubber bumpers protect guards
from jobsite abuse.
• Integrated hang hook allows user
to hang the saw without damaging
front handle or castings.
• Dual bearing blade guide rollers increase
durability in the blade support system.
Blade Thickness: 0.02 in
Linear Speed: 100 ft/min ‑ 350 ft/min
Amps: 10 A
Voltage Type: AC
Blade Length: 44 7/8 in
SKU
Cutting Cap.
Voltage Control Type
Handle Type
Variable speed
Multi‑position
5 in Round; 5 in x
120V
switch
adjustable front handle
4‑3/4 in Rectangular
Variable speed
Multi‑Position Bale
5 in Round; 5 in x
120 V
115‑DWM120K*
switch
Front Handle
4‑3/4 in Rectangular
* Includes: Kit Box
115‑DWM120
ORSNASCO.COM
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Portable Electric Band Saws
Features:
• Center of gravity located directly over blade.
• Self‑lubricating for maximum wear resistance.
Test & Approvals: Complies with OSHA and UL Requirements
Blade Thickness: 0.02 in
Voltage: 120 V
Voltage Type: AC
Control Type: Trigger
Drive Gearing: Worm Gearing
Handle Type: Top D‑Handle/Top T‑Handle
Deep Cut Band Saws AC/DC
Features:
• Optimum speed range.
• Slim motor housing.
• All ball and roller bearings.
• 2X more durabe shrouds with Job Site Armor Technology.
• Completely sealed design around gear housing.
• Gear protecting clutch.
• High torque worm gear with direct drive.
• LED light and tool free shoe.
Test & Approvals: Complies with OSHA and UL Requirements
Blade Thickness: 0.02 in
Voltage: 120 V
Voltage Type: AC/DC
Control Type: Trigger
Drive Gearing: Worm Gearing
Handle Type: Top D‑Handle/Top T‑Handle
SKU
Cutting Cap.
3 1/2 in. (Round Stock); 3‑1/2
495‑6225
x 4‑1/2 in (Rectangular Stock)
3 1/2 in. (Round Stock); 3‑1/2
495‑6226
x 4‑1/2 in (Rectangular Stock)
4‑7/8 in. (Round Stock); 4‑7/8
495‑6232‑20
x 4‑7/8 in (Rectangular Stock)
Blade
Length
44 7/8 in
44 7/8 in
44 7/8 in
Linear Speed
Amps
200 ft/min ‑
6 A; 5 A
250 ft/min
200 ft/min ‑
6 A; 5 A
250 ft/min
0 ft/min ‑ 420
10.5 A
ft/min
Linear
Amps
Speed
0 ft/min ‑
4‑7/8 in. (Round Stock);
10.5 A; 5.5 A
44 7/8 in
495‑6238‑20
420 ft/min
4‑7/8 x 4‑7/8 in (Rectangular Stock)
5 in Rectangular Stock;
35 3/8 in 380 ft/min
11 A
495‑6238‑21
5 in Round Stock
SKU
Cutting Cap.
Blade
Length
Features:
• POWERSTATE™ Brushless Motor increases cutting speed
and power through the toughest applications.
• CPT™ Constant Power Technology helps maintain cut speed
in the toughest applications for optimal performance.
• Jobsite Armor Technology™:Proprietary composite material and
crush zone barriers provide long lasting rugged protection.
• REDLINK PLUS™ Intelligence is the most advanced system of cordless power
tool electronics, providing optimized performance and overload protection
using total system communication between tool, battery and charger.
• All metal direct drive: Delivers maximum tool life with all metal direct
drive gearing system, while requiring less servicing than a chain drive.
• Tool‑Free locking adjustable shoe: Button actuated tool‑free design allows
user to quickly adjust from an extended shoe to no shoe in seconds.
• LED light: Illuminates work surface for increased accuracy and productivity.
• Adjustable shoe allows for less tool rotation
when cutting material above 5 in.
Batt. Type: Lithium‑Ion
Cutting Cap.: 5 in x 5 in
Length: 8.380 in
Handle Type: Top D‑Handle
Includes: (2) M18™ REDLITHIUM™ XC Batteries; M18™ & M12™ Multi‑Voltage
Charger; Case; 1 Blade
Deep Cut Variable Band Saw
Features:
• Provides maximum performance and durability.
• Maintains cut speed in the toughest applications.
• Slimmer motor housing increases user line of
site delivering superior cut accuracy.
Test & Approvals: Complies with OSHA and UL Requirements
Blade Thickness: 0.02 in
Linear Speed: 0 ft/min ‑ 380 ft/min
Amps: 11 A
Voltage: 120 V
Voltage Type: AC
Control Type: Trigger
Drive Gearing: Worm Gearing
Handle Type: Top D‑Handle/Top T‑Handle
Width: 21 in
SKU
495‑6232‑21
Cutting Cap.
5 in Rectangular Stock; 5 in Round Stock
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 503
Blade Length
35 3/8 in
SKU
495‑2729‑22
1.800.678.6577
Voltage
18 V
POWER TOOLS
M18 FUEL™ Deep Cut Band Saws
Batt. Cap.
4 A‑h
503
5/10/16 10:31 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Chop & Cut-Off Saws
High Speed Wheels
M18™ Cordless Band Saws
Features:
• Compact light weight design for cutting overhead and in tight places.
• Cuts most common materials for electrician, plumber
and mechanical cutting applications.
• LED work light illuminates the cut line in dark areas.
• Tool‑free adjustable material shoe quickly adjusts the shoe and allows flush
cuts when working with installed materials against walls and ceilings.
• Drop resistant pulley guard‑engineered geometries and high impact polymer.
• Blade ejection system quickly changes the blade by moving the material
guide into the up position and depressing the blade ejection button.
Test & Approvals: Complies with OSHA and UL Requirements
Batt. Type: Lithium‑Ion
Handle Type: Top D‑Handle/Top T‑Handle
SKU
Voltage
495‑2629‑22
18 V
495‑2629‑20
18 V
Batt.
Cap.
Cutting Cap.
Length
Includes
POWER TOOLS
3‑1/4 in. (Round
(2) M18™ XC High
3 A‑h Stock); 3‑1/4 x 3‑1/4 in. 18 in
Capacity Batteries;
(Rectangular Stock)
1‑Hour Charger; Case
3 1/4 in (Round
(1) M18™ Cordless
3 A‑h Stock); 3 1/4 x 3 1/4 in 16.9 in LITHIUM‑ION Band
(Rectangular Stock)
Saw (2629‑20)
Features:
• Designed to be durable, hard working blades
for a variety of cutting applications in metal,
concrete, ductile pipe and asphalt.
• Thicker fiberglass to withstand extreme
applications and hold up to high speed saws.
• Specially formulated to provide fast,
free cutting and good life.
Cutting Edge Material: High Performance
Aluminum Oxide
Applicable Materials: Rebar; Steel Pipe; Sheet Metal; Structural Steel;
Stainless Steel
Applications: Metal Cutting
SKU
115‑DW8020
Blade Diam
14 in
Arbor Diam.
1 in
Features:
• 12% titanium carbide provides
long life in metal cutting.
• Modified ATB tooth geometry
provides clean, burr‑free cuts.
• Tri‑foil braze absorbs stress,
making the tip stronger.
• Expansion slots
dissipate heat which extends blade life.
Arbor Diam: 1 in
No. of Teeth: 66
Speed: 1,800 rpm
Applicable Materials: Ferrous Metal
Blade Diam
14 in
HVBS-7MW Horizontal/Vertical Bandsaw
Type 1 - Cutting Wheels
Features:
• Single phase metalworking bandsaw with lock‑off trigger.
• Powered by 3/4 HP motor.
• Shuts off automatically after each cut.
• Includes 3/4 in carbon steel blade.
Test & Approvals: UL
Phase: Single
Blade Width: 3/4 in
Blade Length: 93 in
Blade Thickness: 0.032 in
Drive Gearing: Worm Gearing
Throat Depth: 7 in
Tilt: 45°
Height: 41 in
Length: 49 1/2 in
Features:
• Double reinforced with two full sheets of
fiberglass for safety and performance.
• Premium grain for added wheel life and speed.
• Enhanced formulations provide longer
life and optimal performance.
• High quality resin bonds that are 100% inspected
before use for product consistency and quality.
Arbor Diam: 1 in
No. of Teeth: 0
Grit: A24R
Speed: 4,400 rpm
Applicable Materials: Metal
Applications: General Purpose
504
Power Cap.
3/4 hp
Voltage
115 VAC; 230 VAC
Speed
5,500 rpm
Metal Cutting Saw Blades
SKU
115‑DWA7747
SKU
825‑414459
Grit
A24R
SKU
115‑DW8001
ORSNASCO.COM
Blade Diam
14 in
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
TCT Metal-Cutting Blades
Carbide-Tipped Metal Blades
Features:
• Evolution saw blades are designed to deliver
maximum performance by using the highest
grade carbide, hardened blade bodies, and
ultra high‑grade brazing techniques.
• All offer premium quality.
• Designed to increase performance.
Cutting Edge Material: Carbide
Applications: Square Tube; Angle Iron; Mild Steel
Plate; Pipe; Tube; Ferrous Metals
Features:
• Fast, virtually burr‑free cuts.
• Leaves material cool to touch.
Arbor Diam: 1 in
No. of Teeth: 60
Cutting Edge Material: Carbide‑Tipped
Applicable Materials: Ferrous Metals
Applications: Ferrous Metal Cutting
Blade
SKU
Diam
510‑180BLADE‑ST
7 in
510‑185BLADE‑ST 7 1/4 in
510‑8BLADE‑MS
8 in
510‑230BLADE‑ST
9 in
510‑10BLADE‑ST
10 in
510‑12BLADE‑ST
12 in
510‑14BLADE‑AL
14 in
510‑14BLADE‑ST
14 in
510‑14BLADE‑SSN 14 in
Arbor Diam
20 mm
5/8 in
5/8 in
1 in
1 in; 5/8 in
1 in
1 in
1 in
1 in
No. of
Teeth
36
40
50
48
52
60
80
66
90
Speed
3,900 rpm
5,800 rpm
5,800 rpm
3,000 rpm
5,200 rpm
1,600 rpm
1,600 rpm
1,600 rpm
1,600 rpm
Applicable
Materials
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Aluminum
Mild Steel
Stainless Steel
TCT Rage2 Replacement Blade
SKU
510‑RAGE355BLADE
Blade Diam
14 in
Metal Devil™ NXT Circular Saw Blades
Features:
• The Metal Devil® NXT combines strength, long
life and technology in one complete package.
• Manufacturing processes combine plate
technology and carbide science to result in
premium cutting performance in the most
demanding of metal cutting applications.
Cutting Edge Material: Carbide‑Tipped
Applications: Steel
Blade Diam
12 in
Ferrous Metal Abrasive Cut-Off Wheels
Features:
• Internal reinforced arbor.
• Smooth, fast cutting.
• For all ferrous materials (steel,
cast iron and other metals).
Arbor Diam: 1 in
Applications: Ferrous Metal Standard
SKU
Blade Diam
458‑A‑93859‑5
14 in
458‑A‑93859‑25
14 in
458‑724701‑3
16 in
Grit Cutting Edge Material Quantity
36
Aluminum Oxide
5 per pack
36
Aluminum Oxide
25 per pack
A36P
Aluminum Oxide
5 per pack
POWER TOOLS
Features:
• Keep chop saws functioning longer
with a sturdy replacement blade.
• Cuts wood, steel, aluminum and plastic.
• Use with Rage2 14” Multipurpose Chop Saw
and EVOSAW380 15” Steel Cutting Chop Saw.
Arbor Diam: 1 in
No. of Teeth: 36
Speed: 1,400 rpm
Cutting Edge Material: Carbide
Applicable Materials: Aluminum; Plastic; Steel; Wood
Applications: Mild Steel; Aluminum; Brass; Copper; Wood; Wood with Nails;
Plastics; PVC; Plexiglas
SKU
458‑A‑90532
Chop Saws
Features:
• Heavy‑duty compression spring provides
smooth movement and greater durability
than torsion springs.
• Heavy‑duty lock down pin allows head of
the saw to be locked in the carrying position
without the use of a chain.
• Patented tool‑free, 45º adjustable fence allows for fast and
accurate angle cuts without the hassle of using a wrench.
• Quick‑lock vise allows for fast clamping on different
size materials to increase productivity.
• Spindle lock allows user to make wheel changes
fast and easy saving time and money.
• The solid steel base also allows users to weld
jigs or stops directly to the base.
Voltage Type: AC/DC
Control Type: Quick Lock Vise
Handle Type: D‑Handle
Blade Diam.: 14 in
Arbor Diam.: 1 in
Includes: 14 in Abrasive Wheel; Wrench
Power
Voltage Amps
Speed
Cutting Cap
Cap
Max Capacity (Rectangular) 4 x 7 5/8
15 A
3,800 rpm
115‑D28710 4 hp
120 V
in; Max Capacity (Round) 5 in
AC/DC
Max Capacity (Round) 5 in; Max
15A
4,000 rpm
115‑D28715 5 1/2 hp 120 V
Capacity (Rectangular) 4 x 6 1/2 in
AC/DC
SKU
SKU
497‑CSM1466NSC
Blade Diam
14 in
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 505
Arbor Diam.
1 in
No. of Teeth
66
Speed
1,800 rpm
1.800.678.6577
505
5/10/16 10:31 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Rage2 Multi-Purpose Chop Saws
Multi-Cutter Saws
POWER TOOLS
Features:
• Multi‑Cutter cuts 4 times faster than
chop saws and 8 times faster than portable
band saws in 2” x 2” x 1/4” angle iron.
• Largest capacity in its class.
• Patented tool‑free, 45º adjustable fence.
• Quick‑lock vise for fast clamping on different material sizes.
• Extra wide solid steel base provides increased stability.
• Offers versatility by cutting a wide variety of materials
including ferrous and non‑ferrous metals.
• Utilizing a carbide tipped blade allows the depth of cut
to remain constant throughout blade life.
• 14 in 70‑tooth carbide tipped blade delivers a lower
cost‑per‑cut compared to cutting with abrasive wheels.
• Specially designed carbide teeth deliver fast, precise,
virtually burr‑free cuts reducing the need for preparation
grinding, and finished cuts that are cool to the touch.
• Durable metal top handle allows the saw to be carried easily.
• Heavy‑duty lock down pin
• On‑board wheel change wrench allows for convenient
storage and greatly reduces the risk of lost wrenches.
• Easily accessible brushes for convenient servicing.
• Heavy‑duty compression spring provides smooth movement
and greater durability than torsion springs.
Voltage Type: AC
Amps: 15A AC/DC;15 A
Cutting Cap: 5 3/16 in; 6 1/2 in (90° crosscut) @ 4 1/2 in
Phase: Single
Includes: Wrench; Vertical Clamp; 14 in. 70 Tooth Carbide Tipped Blade;
Spindle Lock; Quick Lock Vise
SKU
Blade Diam
115‑DW872
14 in
Arbor Diam
1 in
Power Cap
4 hp
Voltage
120V
Speed
1,300 rpm
EVO Steel-Cutting Chop Saws
Features:
• Cuts mild steel cleanly without excessive heat,
burrs or the necessity of coolant.
• Longer lasting: 1 steel cutting blade = 20
or more abrasive discs.
• Cuts all types of materials including mild steel,
aluminum & Stainless Steel.
• 4X faster cutting than abrasive saws.
• 15” blade capacity for extended reach.
Test & Approvals: CSA
Voltage Type: AC
Amps: 15 A
Cutting Cap: 5 in (90° Square Steel);3 1/2 in (45° Square Steel); 3 3/4 x 7 7/8
in (90° Rectangle Steel); 3 x 4 3/8 in (45° Rectangle Steel); 5 7/8 in (90° Round
Steel); 5 in (45° Round Steel); 4 x 8 in (90° Wood); 4 x 4 in (45° Wood)
Control Type: On/Off Trigger Switch
Includes: 14” Mild Steel Cutting Blade; V‑Block; Clamping Handle; Spare;
Carbon Brush Set; Hex Wrench; Safety Goggles; Ear Plugs; Manual
SKU
Blade Diam
510‑EVO380
14 in
506
Arbor Diam
1 in
Power Cap
2.4 hp
Voltage
120V
Features:
• Multi‑purpose ‑ cuts steel, aluminum, wood & plastic.
• Faster & cleaner cuts than an abrasive wheel.
• No coolant required & produces
virtually no sparks.
• Offers an instantly workable finish.
• Doesn’t lose depth of cut during
use like an abrasive wheel does.
• Includes V‑Block Vise for
securely clamping pipe.
Test & Approvals: CSA
Power Cap: 2.5 hp
Voltage: 120 V
Voltage Type: AC
Amps: 15 A
Speed: 1,450 rpm
Cutting Cap: 4 3/4 x 4 3/4 in (90°
Box);3 1/2 x 3 1/2 in ( 45° Box);4 x 7 in (90° Rectangle);3 x 4 1/3 in (45°
Rectangle);5 1/8 in (90° Round);4 1/8 in (45° Round)
Control Type: On/Off Trigger Switch
Handle Type: Top D‑Handle
Includes: RAGE2 Multi‑Purpose TCT Blade; V‑Block; Chip Collector Bin; Hex
Wrench; Spare Carbon Brush Set; Safety Goggles; Ear Plugs; Manual
SKU
510‑RAGE2
Blade Diam
14 in
Arbor Diam
1 in
Cut-Off Saws
Features:
• Quick release vise for secure stock
retention and fast repeated cut‑offs.
• Spark diversion guard for
operators safety.
• Socket wrench stores on
base for convenience.
• Guide plate adjusts 45° right and left.
• D‑shape handle for easy gripping.
• Adjustable depth
stop for precise repeatable cutting depth.
• Shaft lock for easy wheel changes.
• Lock‑off button.
• Double insulated.
Voltage: 115 VAC
Voltage Type: AC
Amps: 15 A
Speed: 3,800 rpm
Cutting Cap: 4 1/2 in (90° Crosscut); 4 1/2 in (45° Bevel)
Phase: Single
Control Type: Lock‑off Button
Handle Type: D‑shape
Includes: Spark Diversion Guard
SKU
458‑2414NB
Blade Diam
14 in
Arbor Diam
1 in
Speed
1,450 rpm
ORSNASCO.COM
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Circular Saws
8” Metal Cutting Saws
Features:
• Durable magnesium blade shield deflects hot metal chips and sparks.
• Integral chip tank efficiently collects waste for easy clean‑up.
• Depth of cut is for one‑pass through most metal
stud, grating, panel, and decking.
• Exclusive quick‑release blade shield latch for
convenient chip disposal and blade changes.
• Convenient guard retraction lever for plunge cuts.
Voltage: 120 VAC
Voltage Type: AC
Amps: 13 A
Speed: 3,700 rpm
Cutting Cap: 2 9/16 in
Control Type: On/Off
Handle Type: Soft Grip
Blade
Diam
Arbor
Diam
495‑6370‑21
8 in
5/8 in
495‑6370‑20
8 in
5/8 in
SKU
Power Tools MPI 2016 Sect 1 V2.indd 507
Blade Diam
7 1/4 in
Arbor Diam
5/8 in
Metal Cutting Blades
Features:
• Laser cut blade.
• Laser cut anti‑vibration vents.
• Metal cutting grade carbide teeth.
• Anti‑Kickback tooth shoulder.
Blade Diam
12 in
14 in
Arbor Diam
1 in
1 in
No. of Teeth
60
80
POWER TOOLS
© 2016
SKU
585‑25130
SKU
585‑4935558
585‑4935559
Features:
• Completely tool‑free.
• Quick change abrasive wheel system.
• Quick release and adjustable vise.
• Tool‑free adjustable back fence.
• Heavy‑duty cast iron base.
Test & Approvals: Complies with OSHA and UL Requirements
Power Cap: 4 hp
Voltage: 120 V
Voltage Type: AC/DC
Amps: 15 A
Speed: 3,900 rpm
Cutting Cap: 5 in; 4 5/8 in
Phase: Single
Control Type: On/Off
Handle Type: Pistol Grip
Neck Depth: 9 in
Includes: Wheel; Wrench
Blade Diam
14 in
Features:
• Corrosion‑resistant coating
helps prevent rusting.
• Precision ground teeth for
smooth, accurate cuts.
No. of Teeth: 24
Applications: Framing/Ripping
Grind: ATB
Kerf: 0.106 in
Packing Type: Bulk
Tooth Angle: 18 °
Type: Saw Blade
Includes
Carbide Tipped Metal Cutting Blade; Carrying
Case; Hex Blade Wrench
Carbide Tipped Metal Cutting Blade; Hex Blade
Wrench
Abrasive Cut-Off
Machines
SKU
495‑6177‑20
Carbide-Tipped Circular Saw Blades
Wt.
2 1/2 lb
3 lb
Metal Cutting Circular
Saw Blades
Features:
• Titanium carbide‑tipped blade
resists material build up.
• Less burring than abrasive cutting.
• Reduced material burning.
No. of Teeth: 400
Teeth Per Inch: 50
Applications: Steel Cutting
Grind: ATB
Kerf: 0.19 in
Packing Type: Carded
SKU
433‑21884
Blade Diam
8 in
Arbor Diam
5/8 in
Arbor Diam
1 in
1.800.678.6577
507
5/10/16 10:31 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Steel Cutting
Circular Saws
Endurance® Carbide Circular Saw Blades
Features:
• Endurance blades offer faster cutting and extra long life for contractors.
• Carbide teeth made of C3 grade micro ground carbide keeps
the cutting edge sharper for longer periods of time.
• A hardened alloy steel body is used to ensure straight, accurate cuts.
• Specially engineered heat vents and expansion slots
prevent blade distortion and increase blade life.
• All of these features add up to a good quality blade that
contractors can depend on, time and time again.
Applications: Dry Cut
SKU
Blade Diam
495‑48‑40‑4515
8 in
495‑48‑40‑4520
8 in
495‑48‑40‑4505
14 in
Arbor Diam
5/8 in
5/8 in
1 in
No. of Teeth Teeth Per Inch
42
5.25
50
6.25 tpi
72
5.14 tpi
Type
Dry Cut
Dry Cut
Dry Cut
Features:
• Rated for heavy‑duty and
industrial applications with
chip collection capability.
• Cuts mild steel without
excessive heat, burrs or the
necessity of coolants.
• High‑quality construction designed for portability.
Voltage: 120 V
Frequency: 60 Hz
Amps: 15 A
Max: Cutting Angle: 45° Bevel
Control Type: On/Off Trigger Switch
Handle Type: Auxiliary Front Handle
Cutting
Cap.
Blade Arbor Power
Dia Diam Cap.
Speed
510‑STEELSAW1 7 1/4 in
20
mm
2.25 hp
3,900
rpm
2 1/4 in @
90°;1 3/8
in @ 45°
510‑EVO230HDX
1 in
2.35 hp
2,700
rpm
3 1/4 in @
90°;2 1/8
in @ 45°
SKU
9 in
Includes
7‑1/4” Steel Cutting
Blade; Carrying Case;
Ear Plugs; Fence Guide;
Manual; Safety Goggles;
Side Handle; Spare
Carbon Brush Set;
Wrench
(2) Batteries;9” Steel
Cutting Blade; Carrying
Case; Ear Plugs; Fence
Guide; Manual; Safety
Goggles; Side Handle;
Spare Carbon Brush
Set; Wrench
POWER TOOLS
Cut-Out Tools
Cordless Cut-Out Tools
DW364 Circular Saws
Features:
• Rear pivot depth of cut adjustment allows your hand
to remain behind the tool at all depth of cuts.
• Powerful motor made for long life and difficult applications.
• Heavy‑gauge, high‑strength aluminum alloy base
for increased durability on worksite.
• 50° beveling capacity increases capacity in various applications.
Amps: 15 A
Speed: 5,800 rpm
Cutting Cap.: 2 1/4 in (45°); 2 15/16 in (90°)
Max: Cutting Angle: 50° Bevel
Includes: Blade Wrench; Carbide Tipped Blade
SKU
115‑DW364
508
Blade Dia
7 1/4 in
Features:
• Dewalt® exclusive
NANO™‑phosphate lithium ion
cells offer long battery life and durability: 2,000 recharges.
• Quick‑change wheel release provides easier and quicker
wheel removal without the need for a wrench.
• Jam‑pot, low profile gear case provides precise gear alignment for
smoother, quieter transmission while allowing access to tight spaces.
Speed: 6,500 rpm
Spindle Thread: 5/8 in ‑ 11
Control Type: Trigger; Lock‑Off Button
SKU
Voltage
115‑DC415KL
36 V
115‑DC411KA
18 V
115‑DC411B
18 V
ORSNASCO.COM
Blade
Dia
Includes
1 Hour Charger; (2) Batteries; Type 1 & 27 Guards;
4 1/2 in Wrench; (2) Matched Flanges; Type 1 Cutting Wheel;
Type 27 Grinding Wheel; Side Handle; Heavy Duty Kit Box
1 Hour Charger; (2) 18V XRP™ Battery; Type 27 Guard;
4 1/2 in
Type 1 Guard; Wrench; (2) Matched Flanges; Type 1
Cutting Wheel; 2 Position Side Handle; Contractor Bag
Bare Tool; Type 27 Guard; Type 1 Guard; Wrench;
4 1/2 in
(2) Matched Flanges; Type 1 Cutting Wheel;
2 Position Side Handle
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Jig Saws
Bi-Metal Recip Blades
Features:
• Tuff Tooth™ bi metal reciprocating blades
are shatter resistant, their teeth retain
their sharpness, and they cut fast.
• All reciprocating blades are of bi metal material
which means they cut stronger, faster and longer.
Thickness: 0.05 in
Teeth Per Inch: 10; 14
Applicable Material: Soft/Medium Materials; Plastic; Wood;
Non‑Ferrous Soft Metal; Rubber; Nail‑Embedded Wood;
Titanium; Hard Steel; Stainless Steel; Cast Iron; Abrasives; Plaster
Applications: Nail‑embedded wood;Medium metal;Non‑ferrous soft
metal;Plastic;Soft/medium materials
Cutting Edge Material: HSS
Jig Saws
Features:
• Durable.
• Long‑lasting.
Amps: 4.5 A; 5.5 A
Length: 13.444 in
Includes: Blade; Heavy‑Duty Kit Box; Allen Keys
SKU
115‑DW317K
Stroke Length
1 in
Cycle Rate
‑ 3,100 strokes/min
Reciprocating Saws
SKU
433‑20583
Length
12 in
Width
3/4 in
Demolition Recip Blades
Metal Cutting Reciprocating Blades
with WeldTec
SKU
585‑372614BB
585‑372618BB
585‑372618B
585‑372818BB
Length Thickness
6 in
6 in
6 in
8 in
0.035 in
0.035 in
0.035 in
0.035 in
Teeth Per
Inch
Cutting Edge
Material
Quantity
14
18
18
18
Bi‑Metal
Bi‑Metal
Bi‑Metal
HSS
50‑PK
50‑PK
25‑PK
25‑PK
Metal & Wood Cutting Reciprocating Blades
with WeldTec
Features:
• Cuts composition materials, plastic, pipe, carbon steel and stainless steel.
• Use with materials 1/8 in and thicker.
• Electronic beam weld for stronger, longer lasting teeth.
• Bimetal construction for faster cutting and added durability.
• Precision set teeth for faster, smoother cuts.
Thickness: 0.05 in
Cutting Edge Material: Bi‑Metal
SKU
585‑372810BB
585‑372110BB
Length
8 in
12 in
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 509
Teeth Per Inch
10
10‑14
Quantity
50 per pack
50 per pack
SKU
433‑20524
Length
9 in
POWER TOOLS
Features:
• Cuts all metals including nonferrous, pipe,
conduit, stainless and sheet metal.
• Use with materials 1/8in ‑ 1/2in (3.2 ‑ 13 mm) thick.
• Bi‑metal construction for faster cutting and added durability.
• Precision set teeth for faster, smoother cuts.
• Weldtec tooth design makes the blade stronger and last longer.
Width: 738 in
Features:
• Tuff Tooth™ bimetal
reciprocating blades are
shatter resistant, their teeth
retain their sharpness, and they cut fast.
• All reciprocating blades are of bi‑metal material which
means they cut stronger, faster and longer.
Thickness: 0.062 in
Teeth Per Inch: 10
Shank Type: Universal
Applicable Material: Most Metals; Wood
Applications: Metal Cutting
Cutting Edge Material: HSS
Material: Bi‑Metal
Quantity: 25 per pack
Width
7/8 in
Gold™ Reciprocating
Saw Blades
Features:
• Specially formulated Titanium
edge improves the wear
resistance of the teeth for faster cuts.
• Bimetal technology flexes, resists breaking
and extends blade life.
Thickness: 0.042 in
Shank Type: Standard
Applications: Demolition
Cutting Edge Material: Titanium
Material: Bi‑Metal
SKU
433‑21226
1.800.678.6577
Length
6 in
Width
1 in
509
5/10/16 10:31 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Thin Kerf SAWZALL® Blades
T2™ Bi-Metal Reciprocating Saw Blades
Features:
• Cutting blade uses an optimized,
reinforced tooth geometry.
• Design minimizes friction and heat
build‑up while cutting through the widest variety of metal materials.
• Bi‑metal design stands up to the most demanding applications.
Thickness: 0.035 in
Cutting Edge Material: HSS
SKU
Length Width
Teeth
Per
Inch
433‑20564
6 in
3/4 in
14
433‑20529
6 in
3/4 in
18
433‑20566
6 in
3/4 in
18
433‑20578
8 in
3/4 in
18
Applicable Material
Applications
Non‑Ferrous Soft Metal; Stainless
Steel; Structural Steel; Rubber
Non‑Ferrous Soft Metal; Stainless
Steel; Structural Steel
Non‑Ferrous Soft Metal; Stainless
Steel; Structural Steel
Non‑Ferrous Soft Metal; Stainless
Steel; Structural Steel
SKU
Length
Width
Teeth
Per
Inch
Metal Cutting
495‑48‑00‑5182
6 in
3/4 in
14
Most Metals;
Plastic
Metal cutting
495‑48‑00‑5184
6 in
3/4 in
18
Most Metals
495‑48‑01‑6188
9 in
3/4 in
18
Most Metals
495‑48‑00‑5188
9 in
3/4 in
18
Most Metals
495‑48‑00‑5189
12 in
3/4 in
18
Most Metals
Metal cutting
Metal cutting
POWER TOOLS
Bimetal Reciprocating Saw Blades
Features:
• 8% Cobalt edge offers more wear resistance.
• Matrix II cutting edge has shock‑resistant teeth that resist strippage.
• Available in a variety of blade thicknesses to meet flexibility
and rigidity needs for different applications.
Shank Type: Standard
Applications: Cutting Wood, Metal, Composite, Drywall
Cutting Edge Material: HSS‑E (Co‑M42)
Material: HSS
Quantity: 50 per tube
SKU
497‑RB6501014T50
Length
6 in
Features:
• Tooth configuration is optimized for
extended life and increased cutting speed.
• Tough Neck™ ribs strengthen the blade
tang and protect against breakage.
• Blade has a short profile and thin body
making it ideal for fast flexible cuts.
Thickness: 0.035 in
Shank Type: 1/2 in Universal
Cutting Edge Material: HSS‑E (Co‑M42)
Material: Bi‑Metal
Width
3/4 in
Applicable
Material
Applications
Demolition; Rescue;
Remodeling
Demolition; Rescue;
Remodeling
Metal Cutting
Demolition; Rescue;
Remodeling
Demolition; Rescue;
Remodeling
Reciprocating Saws
Features:
• Reciprocating saw designed
with variable speed control
matches the correct speed to application for increased control.
• Powerful motor designed for heavy‑duty applications.
• Variable speed trigger allows user to instantly control speed at the trigger.
Amps: 10 A
Length: 17 1/2 in
Bit/Blade Mounting Type: Keyless
SKU
115‑DWE304
Stroke Length
1 1/8 in
Cycle Rate
0 strokes/min ‑ 2,800 strokes/min
High Performance Bi-Metal Sawzall® Blades
Features:
• 1/2” universal blade tang fits in all Sawzalls.
• Bi‑Metal construction increases blade life, blades do not shatter.
• Matrix II teeth with 8% cobalt.
Thickness: 0.042 in
Shank Type: 1/2 in. Universal
Applicable Material: Most Metals; Wood; Masonry Materials
Applications: Demolition; Rescue; Remodeling
Cutting Edge Material: HSS‑E (Co‑M42)
Material: Bi‑Metal
Quantity: 5 per pouch
SKU
495‑48‑00‑5787
495‑48‑00‑5788
495‑48‑00‑5789
510
Length
9 in
9 in
12 in
Width
1 in
1 in
1 in
Orbital Super Sawzalls
Features:
• Exclusive gear protecting clutch.
• Heavy‑duty quick change blade clamp.
Amps: 13 A
Voltage: 120 V AC
Length: 18 3/4 in
Bit/Blade Mounting Type: Keyless
Handle Type: Variable Speed Trigger
Includes: Saw; Carrying Case
Teeth Per Inch
14
18
18
SKU
495‑6536‑21
ORSNASCO.COM
Stroke Length
1 1/4 in
Cycle Rate
0 strokes/min ‑ 3,000 strokes/min
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Sawzall® Reciprocating Saws
Features:
• Gear protecting clutch extends gear and motor
life by absorbing high impact forces.
• QUIK‑LOK® blade clamp offers fast tool‑free blade changes.
• Delivers exceptional cut speed, durability and power.
Amps: 12 A
Voltage: 120 VAC
Bit/Blade Mounting Type: Tool Free
Handle Type: Back D‑Handle/Body Grip
SKU
495‑6509‑31
Stroke
Length
3/4 in
495‑6519‑30 1 1/8 in
Cycle Rate
0 strokes/min ‑ 3,000
strokes/min
0 strokes/min ‑ 3,000
strokes/min
M18™ FUEL™ SAWZALL® Reciprocating Saws
Length
Includes
19 in
Carrying Case
9 1/4 in; 17.3 in
—
Super Sawzall®
Reciprocating Saws
SKU
495‑6538‑21
Stroke Length
1 1/4 in
SKU
495‑2720‑22
Voltage
18 V
POWER TOOLS
Features:
• Constant Power
Technology™ ‑ maintains
constant speed under load for unmatched cutting performance.
• Patented Gear Protecting Clutch ‑ extends gear and motor life by
absorbing high impact forces caused by sudden blade lock‑ups.
• Patented Counter Balanced Mechanism ‑ smoothest running,
lowest vibrating reciprocating saw in the industry.
• Quik‑Lok™ Blade Clamp System ‑ provides fast and easy blade changes.
• Also has orbital action.
Amps: 15 A
Voltage: 120 VAC
Length: 18 3/4 in
Handle Type: Back D‑Handle
Features:
• Superior performance: Delivers the fastest cutting speed in its
class, increased power and the durability of corded saws.
• POWERSTATE™ Brushless Motor: Supplies constant power
for faster cuts and reduced heat for extended life.
• REDLINK PLUS™ Intelligence: Provides optimized
performance and overload protection using total system
communication between tool, battery and charger.
• REDLITHIUM™ XC 4.0 Battery Pack: Provides superior pack construction,
more work per charge and more work over the life of the pack.
Batt. Type: REDLITHIUM™
Stroke Length: 1 1/8 in
Cycle Rate: 3,000 strokes/min
Length: 19.9 in
Includes: (2) M18™ REDLITHIUM™ XC 4.0 Extended Capacity
Battery Pack (48‑11‑1840); Blade; Carrying Case; M18™ & M12™
Multi‑Voltage Charger (48‑59‑1812)
Batt. Cap.
4 A‑h
Cycle Rate
0 strokes/min ‑ 2,800 strokes/min
V28™ Cordless Sawzall® Recip Saws
Cordless Reciprocating Saws
Features:
• Keyless blade clamp allows for quick blade change
without touching blade or reciprocating shaft.
• Variable speed with trigger lock for more precise cutting.
Stroke Length: 1 1/8 in
Cycle Rate: 3,000 strokes/min
Includes: 1 Hour Charger; 18V XRP™ Battery; Heavy‑Duty Kit Box
SKU
115‑DC385K
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 511
Features:
• Quik‑Lok™ blade clamp for quick tool‑free blade changes .
• Gear protecting clutch for extreme durability.
• Keyless shoe adjustment quickly adjusts blade depth.
Batt. Type: Lithium‑Ion
Stroke Length: 1 1/8 in
Cycle Rate: 3,000 strokes/min
Handle Type: Non‑Slip; Soft Grip
Includes: (2) Blades; (2) Batteries; 1‑Hour Charger;
Impact Resistant Carrying Case
SKU
495‑0719‑22
Voltage
28 V
Batt. Cap.
3 A‑h
Voltage
18 V
1.800.678.6577
511
5/10/16 10:31 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
DRILLING & FASTENING TOOLS
Crimpers
Electromagnetic Drill Presses
Features:
• Automatic base/chip de‑mag.
• Forward/reverse control.
• Base control panel includes variable
speed adjustment for motor.
• Feedback speed control.
• Computer controlled reverse.
• Solid state electronic switching.
• Automatic electronic soft start.
• Motor/magnet interlock.
• Full wave magnetic holding power.
• Line lock‑out prevents operation should voltage be restored
to an interrupted line when switch is locked “on.”.
• For any flat ferrous material 1/2” and thicker.
Test & Approvals: Complies with OSHA and UL Requirements
SKU
RP340 Pressing Tool Kits
POWER TOOLS
Features:
• 30% smaller tool increases manuverability.
• 17% lighter tool reduces operator fatigue.
• More than 400 presses per charge (with advanced Li‑Ion batteries).
• Ultimate flexibility with the ability to switch between
battery and AC power on the same tool.
• 270‑degree barrel jaw swivel.
• LED‑light for continued operations.
SKU
Crimping
Size
632‑43358 1/2 in ‑ 4 in
Amps
Speed
Includes
Adjustable Position Electromagnetic Drill Press Base;
3/4” Motor for Electromagnetic Drill Press
Adjustable Position Electromagnetic Drill Press Base; No.
495‑4208‑1 12.5 A 250 rpm
3 MT Motor for Electromagnetic Drill Press
495‑4206‑1 12.5 A 350 rpm
Includes
6 ProPress Jaws (1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”); Battery
Charger; 2 Li‑Ion Batteries; Carrying Case
Drill Presses
Heavy-Duty Compact Electromagnetic
Drill Presses
Features:
• Simple two‑button control panel.
• Light weight, only 26.5 lbs with comfortable
carrying handle.
• Capacity to cut up to 2 in. diameter holes
thru 2 in. steel with annular cutters.
• Uses annular cutters from 1/2”‑2” in 1”
and 2” depth of cut.
Speed: 450 rpm
SKU
Amps
495‑4270‑21 9:00 AM
495‑4270‑20 9:00 AM
Includes
Lubricant Spray Bottle; Nylon Safety Strap; Hex Wrenches;
Carrying Case
Lubricant Spray Bottle; Nylon Safety Strap; Hex Wrenches
Floor Drill Presses
Features:
• Cast iron head.
• Head casting features a permanently
lubricated ball bearing spindle assembly,
using four heavy duty ball bearings mounted
in an enclosed quill for extended life.
• Massive T‑slotted production work table.
Test & Approvals: CSA
Speed: 4,200 rpm
Includes: Hinged Metal Belt and Pulley Cover
SKU
825‑354170
512
Drills
Diamond Coring Bits
Features:
• Segments are silver brazed into a notched
tube to offer exceptional segment support.
• Designed specifically for the
extra demands of drilling pre‑stressed concrete.
Arbor Thread ‑ TPI or Pitch: 5/8 in ‑ 11
Cutting Edge Material: Diamond
Includes: (1) Bit
Applicable Materials: Masonry Materials
Shank Type: Hollow & Threaded
Tooth Shape: Segment
SKU
495‑48‑16‑1506
ORSNASCO.COM
Type
Hole Saw
Cutting Depth
14 in
Cutting Diam.
1 1/2 in
Length
14 in
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Diamond Coring Motors
Features:
• For diamond coring in reinforced concrete,
tile, masonry, or natural stone.
• Clutch protection protects gears
and motor against overload.
• Triple reduction gearing on all models.
• Dual torque/speed ranges.
• All ball and roller bearings.
• Built‑in water swivel all models.
Test & Approvals: Complies with OSHA and UL Requirements
Control Type: On/Off ‑ 2 Speed
Motor Protection: Clutch
NEMA/IEC Configuration: NEMA Twist Lock Plug; L5‑20P
Speed: 450 rpm; 900 rpm
Voltage: 120 VAC
SKU
495‑4096
Amps
20.00 A
Carbide Bur Bits
Features:
• Manufactured in compliance with the highest quality standards.
• Outstanding quality, long service life and excellent stock
removal performance allow for economical work with
diverse materials, delivering excellent results.
• Easily identified by laser‑imprinted EDP number, SCTI
number and cut information on the shank.
• Packed individually in a sturdy reliable plastic box that
protects the quality of the cutting edges.
• Enhanced labeling technology ensures that the imprinted
label information will remain readable permanently.
Cut Type: Alternate Diamond
Cutting Length: 1 in
Cutting Dia: 1/2 in
Arbor Thread‑TPI or Pitch
1 1/4 in ‑ 7
SKU
419‑24722
Shank Dia
1/4 in
Cutting Edge Material
Submicrograin Solid Carbide
Impact Wrench Utility Pole Auger Bits
SKU
Shank Type
585‑47913
Hex
Cutting Dia
13/16 in
Overall Length
18 in
Dia.
13/16 in
Power Drill Power Pole Auger Bits
Features:
• Single spur, cutter, and
side lip design bore
through creosoted
poles without clogging, binding, or stopping to clear chips.
• Extra‑long twist is ideal for boring large poles, construction
timbers, and for multiple timber applications.
• All bits feature 7/16” adaptable hex shank.
• simply remove it to use round shank.
• Full‑length heat treatment guards against bending in heavy‑duty
applications and strengthens the twist where the greatest strain occurs.
• Bit can be resharpened.
• Medium‑fast screw point ideal for general woodboring applications.
Shank Dia: 7/16 in
SKU
Shank Type
585‑47009 Cylinder+Hex
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 513
Cutting Dia
9/16 in
Overall Length
29 in
Dia.
9/16 in
POWER TOOLS
Features:
• Single spur, cutter, and side lip bore through creosoted poles
without clogging, binding, or stopping to clear chips.
• Extra‑long twist is ideal for boring large poles, construction
timbers, and for multiple timber applications.
• Hex shank design for use in impact wrench drills.
• Full‑length heat treated bit guards against bending in heavy‑duty
applications and strengthens the twist where the greatest strain occurs.
• Bit can be resharpened.
• Medium‑fast screw point ideal for general woodboring applications.
Ball Bearing Chucks
Features:
• 1‑piece fluted sleeve construction.
• Ball trust bearing reduces friction in chuck closing mechansim.
• Through‑hardened sleeve teeth, nose, and keyholes for wear resistance.
• Maximizes gripping force and drilling accuracy.
• Treated to ensure thread life and high gripping surface hardness.
• Jaws center‑ground for absolute straightness and alignment.
• For heavy‑duty, close tolerance production drilling.
• For production drilling equipment, jig borers,
milling machines, lathes, and radials.
Mechanism: Ball Bearing
Finish: Fluted Sleeve
SKU
Type Capacity Capacity
403‑30221 Keyed
0.04 in
(mild
steel)
1/2 in
(mild
steel)
Overall Overall Key
Length Length Size
Housing
Diam
2.97 in 3.88 in
K3
2.4 in
403‑30227 Keyed
—
—
3.26 in 4.31 in
K4
2.6 in
403‑30233 Keyed
1/8 in
(mild
steel)
3/4 in
(mild
steel)
3.95 in 5.12 in
K4
3 in
1.800.678.6577
Mounting
Jacobs
3JT
Female
Jacobs
3JT
Female
Jacobs
4JT
Female
513
5/10/16 10:32 AM
POWER TOOLS
Industrial
Features:
• Patented keyless design.
• Rugged construction.
• High mechanical advantage converts hand
tightening torque into superior bit gripping force.
• Ergonomic design.
• Fast bit changing.
• No lost key delays.
• For variable speed
corded and cordless portable drills.
Test & Approvals: Meets or Exceeds DIN Run‑Out and Dimensional
Specifications
Overall Length: 2.9 in
Housing Diam: 1.7 in
Finish: Hard Nose Black
Key
Size
403‑31038 .062 in ‑ .5 in Keyless
403‑31037 .062 in ‑ .5 in Keyless
Capacity
Mechanism
Mounting
Hand Tightening
Hand Tightening
Threaded 1/2‑20
Threaded 3/8‑24
SKU
115‑DW1969
POWER TOOLS
Key Size
K3
K4
Wt.
0.20 lb
0.36 lb
514
SKU
Includes
Carrying Case; Mandrels: 1/4 in and 7/16 in;
115‑D180002 Saws: 7/8 in; 1 1/8 in; 1 3/8 in; 1 3/4 in; 2 in;
2 1/2 in
Cutting Dia
7/8 in; 1 1/8 in; 1 3/8 in; 1
3/4 in; 2 in; 2 1/2 in
DepthCyclone Premium Annular
Cutters
Features:
• Easy 2‑step sharpening (align & sharpen).
• Sharpens bits in less than 60 seconds.
• Sharpens HSS, TiN coated and carbide.
Point Angle: 118 °; 135 °
Includes: E‑Z Align System; Diamond Grinding Wheel; Chuck; Video; Case
Voltage: 110 VAC
Cord Length: 6 ft
Bit Diam
3/4 in
Cutting Diam
1/16 in‑ 1/2 in
Features:
• Door lock kit utilizes C‑clamp design with
tool‑free clamping and no surface damage.
• Door lock kit utilizes alignment window
and taller bushings to deliver accurate
height placement and straight drilling.
Applicable Materials: Bi‑Metal Material; Wood
Cutting Edge Material: Bi‑Metal Material
Drill Bit Sharpeners
SKU
244‑DD750X
Construction
Electrician’s Hole Saw Kits
Features:
• Soft steel handles.
• Precision crafted.
Mechanism: Thumb
Type
Key
Key
Oilfield
Features:
• Pilot Point starts on contact.
• Unique, no‑spin shank keeps bits securely
seated to save you time and frustration.
• Patented, tapered web ensures
durability for less broken bits.
• Side markings above the shank for reference
points that don‑Inchest wear away.
• Includes metal index, split point bits from 1/16‑inch to 1/8‑inch, and
Pilot Point bits from 9/64‑inch to 1/2‑inch in 64th‑inch increments.
Finish: Gold Ferrous Oxide
No. of Flutes: 29
Length: 10 in
Applications: Metal;Plastic;Wood
Point Angle: Pilot Point
Shank Type: No‑Spin Round Shank
Thumb Handle Chuck Keys
SKU
403‑3651
403‑3655
Welding
Pilot Point® 29-Piece Gold
Ferrous Oxide Drill Bit Sets
Hand-Tite® Keyless Drill Chucks
SKU
Safety
Capacities
A‑Z Letter Size Drill
Features:
• Annular cutters save time and energy when
compared to other hole producing methods.
• While cutting only the periphery of the hole, annular
cutters produce a ream quality, burr‑free hole.
• No step drilling is required and holes
are cut quickly and accurately.
Cutting
Diam
Cutting
Depth
Applicable
Materials
510‑CC812L
13/16 in
2 in
Most Metals
510‑CC812
13/16 in
1 in
Most Metals
SKU
ORSNASCO.COM
Used With
Magnetic Drill
Presses
Magnetic Drill
Presses
Cutting Edge
Material
HSS
HSS
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Steel Hawg® One-Piece Cutter Hole Saws
Features:
• Alternating tooth form geometry for faster cutting.
• Carbide teeth for longer life and cleaner cuts.
• Self‑ejector and centering pin for faster plug removal and accurate cuts.
Applicable Materials: Cast Iron; Steel
Used With: 1/2 in Chuck
Cutting Edge Material: Carbide
SKU
495‑49‑57‑8068
495‑49‑57‑8081
Cutting Diam
11/16 in
13/16 in
Cutting Depth
1/2 in
1/2 in
Kwik Stepper Step Bit Kits
Features:
• Unique split tip design penetrates
through steel faster.
• Resists walking or skidding, even
on round surfaces.
• Balanced, double‑flute construction requires
less pressure, does the work for you.
• Multi‑hole step bit.
Shank Diam: 3/8 in; 1/4 in
No. of Flutes: 2
SKU
Cutting Diam
332‑35884 1/8 in ‑ 1 1/8 in
Applicable Materials
Mild Steel; Copper; Brass; Aluminum; Wood; Plastic;
Laminates
Kwik Stepper Step Bits
Features:
• High grade tool steel.
• Part number labeled on bit piece.
Drive Size: 1/4 in
Material: Tool Steel
Operating Type: Power Tool
Type: Nutsetter Power Bit
Features:
• Unique split tip design penetrates
through steel faster.
• Resists walking
or skidding, even on round surfaces.
• Balanced, double‑flute construction requires
less pressure, does the work for you.
• Multi‑hole step bit.
• Designed and manufactured in the USA.
Measurement Type: Fractional
Cutting Edge Material: Mild Steel; Copper; Brass;
Aluminum; Wood; Plastic; Laminate
SKU
Tip Size
Overall Length
Finish
071‑492X
071‑492‑AX
071‑492‑BX
#2
#2
#2
1 15/16 in
2 3/4 in
3 1/2 in
Tempered
Tempered
Tempered
Measuring
System
Inch
Inch
Inch
SKU
332‑30008
332‑36414
Cutting Diam.
1/2 in ‑ 1 1/8 in
1 3/8 in ‑ 7/8 in
POWER TOOLS
Phillips® Power Bits
Material Thickness
10 gauge
3/8 in
No. of Steps
12
6
Phillips Head Power Bits
Features:
• Used in high torque power tools.
• Designed for use in power drill chuck and chuck adapter.
Overall Length: 1 15/16 in
Drive Size: 1/4 in (hex)
Material: High Grade S2 Tool Steel
Measuring System: Inch
Operating Type: Power Tool
SKU
585‑93007
Tip Size
#2
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 515
Cobalt Step Drills
Features:
• 6X longer life.
• Laser marked sizes.
No. of Steps: 12
Measurement Type: Fractional
Cutting Edge Material: M35 Cobalt HSS
SKU
585‑10234CB
1.800.678.6577
Cutting Diam.
3/16 in ‑ 7/8 in
Material Thickness
1/16 in
515
5/10/16 10:32 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Titanium Fractional Self-Starting
Features:
• Ideal for drilling holes into thin materials such as stainless
steel, copper, brass, aluminum, plastic and laminates.
• Single‑flute cutting edge for greater control through steps.
• 3 flatted shank prevents slipping in drill chuck.
• New SpeedPoint tip penetrates faster than
previous Unibits and prevents walking.
Measurement Type: Fractional
Cutting Edge Material: HSS
High Speed Steel Fractional
Hole Enlarging
Features:
• Single‑flute cutting edge for greater control through steps.
• 3 flatted shank prevents slipping in drill chuck.
• Also available with titanium nitride coating for longer life.
• Patented single‑flute cutting edge
gives the user a true round hole every time.
• Ideal for drilling holes into thin materials such as stainless
steel, copper, brass, aluminum, plastic and laminates.
• Pilot hole required.
Measurement Type: Fractional
Cutting Edge Material: HSS
SKU
585‑10220
585‑10221
Cutting Diam.
9/16 in ‑ 1 in
13/16 in ‑ 1 3/8 in
Material Thickness
1/8 in
1/8 in
SKU
585‑15101
585‑15104
585‑15103
No. of Steps
8
10
POWER TOOLS
High Speed Steel Fractional
Self-Starting
Features:
• Single‑flute cutting edge for greater control through steps.
• Hex shank prevents slipping in drill chuck.
• Also available with (TiN) coating for longer life.
• New SpeedPoint tip penetrates faster than
previous Unibits and prevents walking.
• Ideal for drilling holes into thin materials such as stainless
steel, copper, brass, aluminum, plastic and laminates.
Measurement Type: Fractional
Cutting Edge Material: HSS
SKU
585‑10310
585‑10313
585‑10231
585‑10232
585‑10234
585‑10233
585‑10235
585‑10239
Cutting Diam.
1/2 in
1 1/8 in
1/8 in ‑ 1/2 in
3/16 in ‑ 1/2 in
3/16 in ‑ 7/8 in
1/4 in ‑ 3/4 in
1/4 in ‑ 1 3/8 in
7/8 in ‑ 1 1/8 in
Material Thickness
1/8 in
—
1/8 in
1/8 in
1/16 in
3/8 in
1/8 in
1/8 in
Step Drill Sets
Features:
• Single‑flute cutting edge for greater
control through steps.
• 3 flatted shank prevents slipping in drill chuck.
• Non‑skid self‑starting tip eliminates skidding
and the need for center punching.
SKU
585‑10225
585‑10502
516
Material Thickness
1/8 in
3/8 in
3/8 in
No. of Steps
13
12
9
Vari-Bit® Step Drill Bits
Features:
• Sturdy step drill bits feature high speed steel
construction and steam oxide coating.
• Patented design with two cutting flutes
allows for clean burr‑free holes.
• Drill bits cut through materials faster than standard bits.
• Eliminates the problem of tip breakage on standard drill bits.
Measurement Type: Fractional
Cutting Edge Material: HSS
SKU
433‑30883
433‑30882
433‑30912
No. of Steps
1
1
13
6
12
9
10
2
Cutting Diam.
1/8 in ‑ 1/2 in
3/16 in ‑ 7/8 in
1/4 in ‑ 3/4 in
Cutting Diam.
1/4 in ‑ 3/4 in
1/2 in ‑ 1 in
7/8 in ‑ 1 3/8 in
No. of Steps
9
9
5
29-pc Black and Gold
Metal Index Drill Bit Sets
Features:
• Oxide treatment resists corrosion, helps
prevent bit from rusting.
• Turbomax tip starts up to 10x faster.
• Flatted shanks above 11/64” eliminates
slippage in drill chuck.
• Reduced shank above 3/8” allows the use of
larger drill bits in a 3/8” chuck.
• Rubber overmolded case protects kit if dropped.
• Tap and Drill selection chart for convenient reference.
• Automatic indexing for easy bit access and identification.
• Removable cartridges: easy to carry bits from case to worksite.
• Sizes include 1/16” to 1/2” in 1/64” increments.
Finish: Oxide
Includes: 29‑piece set in metal index case includes drill bit sizes 1/16 in to 1/2
in in 1/64 in increments
Increment: 1/64 in
SKU
585‑3018005
ORSNASCO.COM
Cutting Diam
1/16 in ‑ 1/2 in
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
801 Series HSS Jobbers
Length Drill Bit Sets
29-pc Black Oxide Metal
Index Drill Bit Sets
Features:
• Oxide treatment resists corrosion,
helps prevent bit from rusting.
• 135° split point tip starts on
contact, cuts with less force.
• Reduced shank above 3/8” allows the
use of larger drill bits in a 3/8” chuck.
• Rubber overmolded case protects kit if dropped.
• Tap and Drill selection chart for convenient reference.
• Automatic indexing for easy bit access and identification.
• Removable cartridges: easy to carry bits from case to worksite.
• Sizes include 1/16” to 1/2” in 1/64” increments.
Cutting Edge Material: HSS
Finish: Black Oxide
Includes: 29‑piece set in metal index case includes drill bit sizes 1/16 in to 1/2
in in 1/64 in increments
Increment: 1/64 in
Point Angle: 135 °
Type: HSS Drill Bit Set
SKU
585‑3018004
Cutting Diam
1/16 in ‑ 1/2 in
29-pc Cobalt M-35 Metal
Index Drill Bit Sets
SKU
585‑3018002
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 517
Cutting Diam
1/16 in ‑ 1/2 in
SKU
585‑80181
Size
No. 1‑60
High Speed Steel
Drill Bit Sets
Features:
• Bit is constructed of high speed
steel for the best combination of
strength, heat, and wear resistance.
• Standard 118 degree point for use
in wood, metal, and plastic.
Cutting Edge Material: HSS
Finish: Bright
Includes: 29‑piece set in metal case includes drill bit sizes 1/16 in through 1/2
in in 1/64 in increments
Point Angle: 118 °
SKU
585‑60138
Cutting Diam
1/16 in ‑ 1/2 in
POWER TOOLS
Features:
• Constructed of M‑35 5 percent cobalt
high speed steel for super abrasive
resistance in tough metals.
• Cobalt steel extends cutting edge life and
maintains cutting life after resharpening.
• Extra hard drill for greater wear.
• 135° split point tip starts on
contact, cuts with less force.
• Reduced shank above 3/8” allows the
use of larger drill bits in a 3/8” chuck.
• Rubber overmolded case
protects kit if dropped.
• Tap & Drill
selection chart for convenient reference.
• Automatic indexing for easy bit access and identification.
• Removable cartridges: easy to carry bits from case to worksite.
• Sizes include 1/16” to 1/2” in 1/64” increments.
Cutting Edge Material: HSS
Finish: Gold Oxide
Includes: 29‑piece set in metal index case includes drill bit sizes 1/16 in to 1/2
in in 1/64 in increments
Increment: 1/64 in
Point Angle: 135 °
Features:
• Used where more precisely
sized holes are required.
• Numbered.
• Drills exact hole size; ideal for tapping.
• Bits are constructed of M‑2 high speed
steel for best combination of strength,
heat resistance, and wear resistance.
• Standard 118 degree point for use in wood, metal and plastic.
• Steel case index.
Cutting Edge Material: HSS
Finish: Bright
Includes: 60‑piece set in metal index case
Point Angle: 118 °
Pilot Point® Gold Ferrous Oxide Drill Bits
Features:
• Pilot Point® Tip starts on contact for clean, accurate
holes and reduces lock‑up on breakthrough.
• No‑Spin shank eliminates the frustration of bit spinning in the chuck.
• Tapered web provides greater durability to reduce breaking.
• Size markings are located above the shank to prevent wearing away.
Bit Length: 3.62 in
Finish: Gold
Overall Length: 5 in
Shank Type: Straight
SKU
115‑DW1924B
1.800.678.6577
Cutting Diam
3/8 in
517
5/10/16 10:32 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Cyclone Annular Cutters
Features:
• Cuts quickly and accurately.
• Creates smooth, burr‑free hole.
• No step drilling required.
SKU
510‑CC562L
510‑CC875L
DWD210G 1/2 in Heavy-Duty Drills
Cutting Diam
9/16 in
7/8 in
General Purpose High Speed Steel
Fractional Straight Shank Jobber Length
Drill Bits
POWER TOOLS
Features:
• Constructed of M‑2 high speed steel for the best combination
of strength, heat resistance, and wear resistance.
• Standard 118 degree point for use in wood, metal, and plastic.
Bit Length: 7/8 in
Applicable Material: Metal; Wood; Plastic
Flute Length: 7/8 in
Finish: Bright
Overall Length: 1 7/8 in
Shank Type: Straight
SKU
585‑60108
Point Angle
118°
518
Chuck Size
1/2 in
Chuck Type
Metal, Single Sleeve Ratcheting
Right Angle Drills
Features:
• Helical‑cut steel, heat‑treated gears for increased
durability and long gear life.
• Metal gear housing for jobsite durability
and increased reliability.
Amps: 7.8 A
Speed: ‑ 850 rpm
Cutting Cap.: 3 1/2 in (wood)
Cord Length: 8 ft
Control Type: Trigger
Handle Type: Pistol Grip Design
Includes: 360° Side Handle; Chuck Key w/Holder
Chuck Size
1/2 in
SKU
115‑DWD210G
Cutting Diam
1/8 in
1/2 in Heavy-Duty VSR
SKU
115‑DW235G
Features:
• VSR pistol grip drill.
• 10 amp motor delivers increased drilling performance.
• Patented DEWALT built motor design generates 50% more power
with increased overload protection for added durability.
• 0‑1250 RPM, variable speed reversing switch for increased versatility.
• Soft grip handle and two‑finger trigger for
increased comfort and greater control.
• 360° locking side handle with soft grip for greater control and versatility.
• Metal gear housing for jobsite durability and increased reliability.
Amps: 10 A
Speed:1,200 rpm
Cutting Cap.: 1 1/2 in (wood with spade bit); 1 1/2 in (wood with auger bit); 1/2
in (steel with twist bit); 2 in (steel with hole saw)
Cord Length: 8 ft
Control Type: Trigger; Reverse Switch
Handle Type: Pistol Grip; 360° Locking Side Handle
Includes: Locking 360° Side Handle
Type: VSR Pistol Grip Drill
Features:
• Compact right‑angle design for easy access in tight places.
• Die‑cast metal gear housing for jobsite durability and tool reliability.
Amps: 3.7 A; 4 A
Speed:1,200 rpm
Cutting Cap.: 1 1/8 in (wood with spade bit);1 1/8 in (wood with hole saw);3/8
in (steel with twist bit)
Control Type: Paddle Switch
Handle Type: Pistol Grip Design
Includes: Chuck Key w/Holder; Chuck Key with Holder
Chuck Type
Keyed
SKU
115‑DW160V
ORSNASCO.COM
Chuck Size
3/8 in
Chuck Type
Keyed
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
EVOMAG42 Electromagnetic Drill Set
Spade Handle Drills
Features:
• AC/DC, forward/reverse rocker
switch ideal for backing out jammed
bits or mixing drywall mud.
• Increased durability in high torque
applications with 5/8 in spindle.
• Two‑position rear spade
handle and three‑position side handle gives greater
control for all drilling and mixing applications.
• Triple gear reduction provides increased torque and reduces gear stress.
• Low 450 RPM provides increased torque for drilling
large diameter holes in wood and metal.
• Variable speed reversible switch reduces air bubbles when
mixing mud and offers greater control when drilling.
• Increased torque for drilling and mud mixing with 0‑550 RPM.
• Soft grip handle for increased comfort.
Cutting Cap.: 1 1/2 in (wood with auger bit);1/2 in (steel with twist bit);3 in
(steel with hole saw)
Cord Length: 8 ft
Control Type: Variable Speed Reversible Switch
Handle Type: 2‑Position Spade Handle;3‑Position Side Handle
Includes: Three‑position side handle and chuck key with holder
Type: Spade Handle Mud Mixer
SKU
115‑DW130V
Chuck Size
1/2 in
Chuck Type
Keyed
Voltage
120 V
Amps
7 A; 9 A
Features:
• Although small in size it is well‑suited for
heavy‑duty industrial and fabrication work.
• Light weight makes it manageable to position
in both awkward and confined spaces.
• Quick and easy adjustable head position.
• Heavy‑duty magnetic holding power.
Voltage: 120 V
Amps: 10 A
Cutting Cap.: 1 1/8 in
Spindle Thread: N/A
Length: 12 1/2 in
Cord Length: 8 ft
Control Type: Manual
Handle Type: Spoke
Includes: Carry Case; 1/2 in Drill Chuck & Key;
Coolant Tank; Quick Release Coolant Hose; Three Hex Keys; Three Handles;
Guard; Safety Strap; Safety Goggles; Ear Plugs; Manual
SKU
510‑EVOMAG28
Chuck Size
1/2 in
Chuck Type
3/4 Weldon Shank and Jacob Chuck
Speed
550 rpm
POWER TOOLS
1/2 in Compact Drills
Electromagnetic Base-Drilling Systems
Features:
• Quick and easy adjustable head position.
• Heavy‑duty magnetic holding power.
• Twist drills up to 1/2 in dia.
• and is easily mounted with the supplied chuck and adaptor.
• Integrated coolant system.
• High‑quality construction.
• Spoke handles can be mounted on right or left side.
Voltage: 115 V
Amps: 10 A
Cutting Cap.: 1 5/8 in
Cord Length: 8 ft
Includes: Carry Case; 1/2 in Drill Chuck & Key; Chuck Adaptor; Three Handles;
Safety Guard; Safety Strap; Safety Goggles; Ear Plugs; Manual
SKU
510‑EVOMAG42
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 519
Chuck Size
1/2 in
Chuck Type
Jacobs
Features:
• Rear mounted assist spade handle.
• Long switch and pipe handle for added control.
• For drilling and reaming large holes.
Test & Approvals: Complies with OSHA and UL Requirements
Voltage: 120 V
Amps: 7 A
Cutting Cap.: 1/2 in (steel)
Spindle Thread: 5/8 in ‑ 16
Length: 12 1/4 in
Cord Length: 8 ft
Control Type: On/Off
Handle Type: Back D‑Handle/Centered Pistol Grip/Top Rod
Includes: Pipe Handle
Type: Straight Drill
SKU
495‑1660‑6
1.800.678.6577
Chuck Size
1/2 in
Chuck Type
Keyed
519
5/10/16 10:32 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
18V Cordless Compact
Hammerdrill Kits
Features:
• LED work light provides increased visibility
in confined spaces.
• Compact size allows users to fit into tight spaces.
• Lightweight design minimizes user fatigue.
Speed: 500 rpm; 1,700 rpm
Cycle Rate: 8,500 blows/min; 29,000 blows/min
Batt. Cap.: 1.7 Ah
Batt Type: NiCd
Length: 14 3/4 in
Handle Type: Pistol Grip
Includes: (2) 18V Batteries; 1 Hour Charger;
Screwdriver Bit; Heavy Duty Kit Box
1/2 in Magnum® Drills
Features:
• Heavy‑duty keyed chuck with holder provides
stability during drilling and fastening.
• Features variable‑speed control and reverse.
• Durable build enables drill to handle industrial and
construction applications with ease.
Test & Approvals: Complies with OSHA and UL Requirements
Voltage: 120 VAC
Cutting Cap.: 1/2 in (steel)
Spindle Thread: 1/2 in ‑ 20
Cord Length: 8 ft
Control Type: Electronic Variable
Type: Straight Drill
POWER TOOLS
SKU
Chuck Chuck
Amps Speed
Size Type
495‑0234‑6 1/2 in Keyed 5.5 A
950
rpm
495‑0299‑20 1/2 in Keyed
8A
850
rpm
495‑0300‑20 1/2 in Keyed
8A
850
rpm
Length
Handle
Type
SKU
115‑DC725KA
Includes
Three‑Wire Quik‑
Lok Cord; Chuck;
Pistol
10 1/2 in Grip/Side Chuck Key; Rubber
Flex Key Holder;
Rod
Side Handle
360° Side Handle;
Pistol
Chuck; Chuck Key;
12 13/64 in Grip/Side
Rubber Flex Key
Rod
Holder
360° Side Handle;
Soft
Pistol Chuck; Chuck Key;
12 13/64 in
Grip/Side Rubber Flex Key
Holder
Rod
Super Hole-Shooters
Features:
• Heavy‑duty aluminum alloy housing.
• Helical cut, heat‑treated gears.
• Long switch and pipe handle
for added control.
• Drive shaft runs on pre‑lubricated
ball bearings.
• Rear‑mounted assist spade handle.
Test & Approvals: Complies with OSHA and
UL Requirements
Voltage: 120 V
Amps: 10 A
Cutting Cap.: 3/4 in (steel)
Length: 18 1/2 in
Cord Length: 8 ft
Control Type: On/Off
Handle Type: Back D‑Handle/Centered Pistol
Grip/Top Rod
Includes: Pipe Handle
Type: Straight Drill
SKU
495‑1854‑1
520
Chuck Size
3/4 in
Voltage
18 V
Chuck Size
1/2 in
Cordless Compact
Drill/Driver Kit
Features:
• LED work light provides increased visibility
in confined spaces.
• Durable, right angle transmission with sealed
ball bearing for a longer tool life.
• Compact size allows users to fit into tight spaces.
Handle Type: Pistol Grip
SKU
Voltage
Chuck
Size
Speed
Torque
Batt. Batt
Cap. Type
115‑DC742KA
12 V
3/8 in
1.7
400 rpm;
350 in lb
Ah
1,450 rpm
115‑DC720KA
18 V
1/2 in
500 rpm;
450 in lb
1,700 rpm
—
Includes
1 Hour Charger; (2)
NiCd 12V Batteries; Heavy‑
Duty Kit Box
1 Hour Charger; (2)
— 18V Batteries; Heavy‑
Duty Kit Box
Cordless Compact
Drill/Drivers
Features:
• Compact, lightweight design fits into tight areas.
• Ergonomic handle delivers comfort and control.
SKU
Voltage
Batt
Type
Length
Handle
Type
Includes
500 rpm;
Li‑Ion
1,700 rpm
8.2 in
Pistol Grip
Heavy Duty
Kit Box; (2)
Li‑Ion Batteries;
30‑Mintue Charger
Speed
Chuck Size: 1/2 in
115‑DCD760KL
18 V
Chuck Size: 1/3 in
115‑DCD780C2
Chuck Type
Keyed
ORSNASCO.COM
20 V
6 rpm
Belt Hook; (2) 20 V
Max* Lithium Ion
Battery; 30 Minute
Fast charger;
Lithium 10 1/8 in Ergonomic
DCD780 1/2 in Drill
Driver; On‑Board
Bit Holder
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
DeWalt® DCD980M2
Cordless Drill/Drivers
Features:
• Three‑speed all‑metal transmission
matches the tool to the task for fastest application speed.
• Heavy‑duty 1/2” metal ratcheting chuck with carbide
inserts provide superior bit gripping strength.
Batt Type: Lithium Ion
Handle Type: 360 Side Handle
Includes: 1 Hour Charger; (2) 20V Max XR
Premium Lithium Ion Batteries; Kit Box
SKU
115‑DCD980M2
Voltage
20 V
Chuck Size
1/2 in
Speed
2 rpm
Batt. Cap.
4 A‑h
Length
9 3/8 in
Features:
• Exclusive NANO™‑phosphate lithium ion cells offer long
battery life & durability: 2,000 recharges.
• Patented 3‑speed all‑metal transmission matches the
speed to the application for optimal performance.
• 22 clutch settings.
Cycle Rate: 6,800 blows/min; 20,400 blows/min; 27,200 blows/min
Torque: 600 in lb
Batt Type: Phosphate Lithium‑Ion
Handle Type: Anti‑Slip Grip
Includes: 1 Hour Charger; (2) Batteries; 360° Degree Side Handle;
Heavy Duty Kit Box
SKU
Voltage
Chuck Size
36 V
1/2 in
Speed
400 rpm; 1,200 rpm;
1,600 rpm
Batt. Cap.
2 A‑h
XRP™ Cordless Drill/Driver Kits
Features:
• XRP™ extended run‑time batteries
provide long run‑time & battery life.
• Patented 3‑speed all‑metal transmission
matches the tool to task for fastest
application speed and improved run time.
• LED worklight provides increased
visibility in confined spaces.
• Best in class length for improved
balance and better control.
• LED worklight provides increased visibility in confined spaces.
• XRP™ extended run‑time batteries provide long run‑time & battery life.
Speed: 500 rpm; 1,250 rpm; 2,000 rpm
Length: 9 1/2 in
Includes: 1 Hour Charger; 360° Side Handle; Heavy Duty Kit Box; (2) XRP™
Batteries
Voltage: 18 V
SKU
Chuck
Size
115‑DCD950KX 1/2 in
115‑DCD940KX 1/2 in
Cycle Rate
8,500 blows/min;
21,250 blows/min;
34,000 blows/min
—
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 521
Batt.
Cap.
POWER TOOLS
Features:
• XRP™ Nano Phosphate Li‑Ion extended run‑time batteries
provide superior ergonomics, long run‑time & battery life.
• Patented 3‑speed all‑metal transmission matches the tool to
task for fastest application speed and improved run time.
• LED worklight provides increased visibility in confined spaces.
• Offer long battery life and durability.
• High power, high efficiency motor delivers 450 unit watts out of max
power for superior performance in all drilling and fastening applications.
Speed: 500 rpm; 1,250 rpm; 2,000 rpm
Cycle Rate: 8,500 blows/min; 21,250 blows/min; 34,000 blows/min
Batt. Cap.: 2.2 Ah
Batt Type: Phosphate Lithium‑Ion
Length: 9 1/2 in
Handle Type: T‑Handle;NonSlip;Soft Grip
Includes: 360° Side Handle; 1‑Hour Charger; Heavy Duty Kit Box;
(2) XRP™ Batteries
Nano™ Technology
Cordless Drills
115‑DC901KL
XRP™ Nano™ Hammerdrill/Drill/Driver
Batt Type
Handle Type
2.4 Ah
NiCd
T‑Handle; Non‑
Slip; Soft Grip
4.0 Ah
Lithium Ion
T‑Handle
SKU
115‑DCD970KL
Voltage
18 V
Chuck Size
1/2 in
M12™ Ratchet Kit
Features:
• REDLINK PLUS™ Intelligence prevents damage to the
tool and battery due to overloading or overheating.
• On‑board fuel gauge helps to monitor the charge
precisely for less downtime on the job.
• Built‑in LED light illuminates work
surfaces in dark locations.
• Tool‑belt portable with a 3/4‑inch,
low‑profile head design for work in the
tightest of spaces and engine bays.
Speed: 250 rpm (no load)
Torque: 335 ft lb
Batt Type: Lithium‑Ion
Length: 10 3/4 in
Includes: (1) M12™ Cordless 3/8” Lithium‑Ion
Ratchet (2457‑20); (1) M12™ REDLITHIUM™ Battery
(48‑11‑2401); (1) M12™ Lithium‑ion Battery Charger (48‑59‑2401);
(1) Carrying Case
SKU
495‑2457‑21
1.800.678.6577
Voltage
12 V
521
5/10/16 10:32 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
M18™ High-Performance
Cordless Drill/Drivers
Features:
• Powerful brushless motor.
• REDLINK PLUS™ Intelligence prevents damage to the
tool and battery due to overloading or overheating.
• Batteries deliver more work per charge and more
work over the life of the battery.
Speed: 0‑550/0‑2,000 (no load)
Batt Type: Lithium‑Ion
Handle Type: Centered Pistol Grip; Side Handle
Includes: (1) M18 FUEL™ 1/2” Drill/Driver (Bare Tool) (2703‑20); (2) M18™
REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48‑11‑1850); (1) M18™
& M12™ Multi‑Voltage Charger (48‑59‑1812); (1) Belt Clip; (1) Bit Holder; (1)
Side Handle; (1) Carrying Case
POWER TOOLS
M18 FUEL™ 2-Tool Combo Kit
Features:
• Kit includes Milwaukee® cordless hammer
drill/driver and cordless impact driver.
• Each tool features Powerstate™ brushless motor: hammer
drill delivers 1200 in lbs of peak torque and up to 2000 RPM,
impact driver provides 1800 in lbs of fastening torque.
• Four‑mode Drive Control™ provides greater
control over output speed and power.
• Includes durable carrying case.
Speed: 2,000 rpm (Hammer Drill/Driver); 3,700 rpm (Impact Drill)
Cycle Rate: 32,000 blows/min (Hammer Drill/Driver)
Torque: 1200 in lb (Hammer Drill/Driver); 1800 in lb (Impact Driver)
Length: 7 3/4 in (Hammer Drill/Driver); 5 1/4 in (Impact Driver)
Handle Type: Side Handle (Hammer Drill/Driver); Pistol Grip (Impact Driver)
Includes: M18 FUEL™ 1/2 in Hammer Drill/Driver (Bare Tool) (2704‑20); M18
FUEL™ 1/4 in Hex Impact Driver (Bare Tool) (2753‑20); (2) M18™ REDLITHIUM™
XC5.0 Extended Capacity Battery Pack (48‑11‑1850); M18™ & M12™
Multi‑Voltage Charger (48‑59‑1812); (2) Belt Clips; (2) Bit Holders;
Side Handle; Carrying Case
SKU
Voltage
495‑2897‑22
18 V
Chuck Size
1/2 in (Hammer Drill/Driver);
1/4 in (Impact Driver)
Batt. Cap.
Batt. Type
1.4 A‑h
Lihium‑Ion
SKU
495‑2703‑22
Voltage
18 V
522
Length
7 1/2 in
Features:
• All‑metal, single‑sleeve, ratcheting chuck
with all carbide jaws.
• Exclusive Clip‑Lok™ system, secures tool
to belt with one‑hand.
• Reversible battery pack.
Speed: 0‑450/0‑1,800 RPM
Cycle Rate: 9,0 blows/min; 27,0 blows/min
Batt. Cap.: 3 A‑h
Batt Type: Lithium‑Ion
Handle Type: Non‑Slip; Soft Grip
Includes: (2) Batteries; Side Handle; Phillips Bit; 1‑Hour Charger; Impact
Resistant Carrying Case
SKU
495‑0726‑22
Voltage
28 V
Chuck Size
1/2 in
Torque
6 in lb
Length
10 1/2 in
Screwdrivers
Features:
• Milwaukee® 4‑Pole Frameless Motor:
robust design with rare‑earth magnets.
• Compact Design: allows greater
accessibility in tight work spaces.
• All‑Metal Gear Case and Chuck:
provide maximum impact and shock durability.
• REDLINK™ Intelligence: Advanced overload protects the tool
against abusive situations and provides maximum life.
Speed: 0‑400/ 0‑1,800 RPM
Torque: 5 in/lb
Batt. Cap.: 18 V
Batt Type: Lithium‑ion
Length: 7 1/4 in
Handle Type: Pistol Grip
Includes: (2) M18™ REDLITHIUM™ Compact Battery; (1) M18™ & M12™
Multi‑Voltage Charger; (1) Carrying Case
Voltage
18 V
Torque
1,200 in lb
V28™ Cordless Hammer/Drills
M18™ Compact 1/2” Drill
Driver Kit
SKU
495‑2606‑22CT
Chuck Size
1/2 in
Chuck Size
1/2 in
Heavy-Duty VSR
Versa-Clutch® Drill/Drivers
Features:
• Depth sensitive “set and forget” nosepiece for
consistent fastener depth.
• Two‑finger trigger for increased comfort.
• Helical‑cut steel, heat‑treated gears for long life and durability.
• High power motor for metal fastening applications.
• Versa‑clutch® torque adjustment system to “dial” the proper torque needed
to efficiently drive fasteners without stripping or breaking fastener.
• Excellent ergonomics offers less user fatigue.
• Rubber grip.
• Also available in 220V.
• Metal nose and gear case for durability on the job.
Length: 12 in
SKU
Max Fastener Size
115‑DW268
#14
ORSNASCO.COM
Amps
6.5 A
Speed
0 rpm ‑ 2,500 rpm
Torque
132 in lb
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Wrenches
Cordless Screwdrivers
Features:
• Has torque output that provides a superior power to
weight ratio in a variety of fastening applications.
• Adjustable two‑position handle allows for operation
as both in‑line and pistol‑grip.
• Heavy duty metal hinge provides secure and sustained two‑position lock.
• Industrial quick‑release hex‑shank chuck allows for quick screwdriver bit
change and prevents bit “run out.” Variable speed and reversing trigger
for fastening and pre‑drilling into wood, plastic and light‑gauge metal.
Speed: 0 rpm ‑ 500 rpm
Torque: 80 in lb
SKU
115‑DW920K‑2
Voltage
7.2 V
Pocket Drive™ Cordless Drill/Drivers
Features:
• Eleven‑position clutch to prevent over torque in softer materials.
• Almost half the size of a 12 volt drill/driver.
• LED front light.
• Variable speed trigger forward reverse button.
Drive Size: 1/4 in (hex)
Drive Type: Quick Change
Speed: 0 rpm ‑ 350 rpm; 1,300 rpm
Torque: 265 in lb
Length: 5.6 in
Includes: (2) Max Batteries; 30‑Minute Charger; Carrying Bag
SKU
114‑PS21‑2A
Voltage
12 V
Batt. Type
Litheon™
POWER TOOLS
M4™ 1/4” Hex Screwdriver Kits
Features:
• 21‑position clutch setting with auto shut‑off.
• 44 inch‑pounds of torque.
• 2‑speed gearbox.
Chuck Size: 1/4 in Hex
Clutch Setting: 21
Speed: 200 rpm ‑ 600 rpm
Torque: 44 in lb
Length: 9.6 in
SKU
495‑2101‑22
495‑2101‑21
Voltage
4V
4V
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 523
Batt. Type
Red Lithium
Red Lithium
Cordless Impact Drivers
Features:
• Frameless motor with replaceable brushes for
extended tool durability and life.
• Allows access into tighter areas and reduces user fatigue.
• Textured ant‑slip comfort grip provides maximum comfort.
Drive Size: 1/4 in
Drive Type: Hex Shank Quick Release
Speed: 0 rpm ‑ 2,400 rpm
Cycle Rate: 0 blows/min ‑ 3,000 blows/min
Torque: 1,330 in lb
Length: 5 3/4 in
Includes: 1 Hour Charger; (2) 18V XRP™ Batteries; Heavy‑Duty Kit Box
SKU
115‑DC825KA
1.800.678.6577
Voltage
18.00 V
523
5/10/16 10:32 AM
POWER TOOLS
Industrial
Cordless XRP Li-Ion Impact Drivers
Features:
• Allows access into tighter areas and reduces user fatigue.
• Frameless motor with replaceable brushes for
extended tool durability and life.
• Textured ant‑slip comfort grip provides maximum comfort.
Drive Size: 1/4 in
Drive Type: Hex Shank Quick Release
Speed: 0 rpm ‑ 2,400 rpm
Cycle Rate: 0 blows/min ‑ 2,700 blows/min
Torque: 111 ft lb
Length: 5 3/4 in
Includes: 1 Hour Charger; Heavy‑Duty Kit Box; (2) 18V Li‑Ion Batteries
Oilfield
Construction
Batt. Type
Li‑Ion
Features:
• 345 ft‑lbs of deliverable torque in forward and reverse.
• Soft grip handle.
• Ball bearing construction for increased durability.
Retainer Type: Detent Pin
Speed: 2,100 rpm
Torque: 345 ft lb
Amps: 7.5 A
Length: 11 1/4 in
Cord Length: 11 1/4 in
Control Type: On/Off/Reverse
Handle Type: Soft Grip
SKU
115‑DW292
115‑DW294
Drive Size
1/2 in
3/4 in
POWER TOOLS
Voltage
18.00 V
Welding
Heavy Duty Impact Wrenches
™
SKU
115‑DC827KL
Safety
Cordless XRP Li-Ion Impact Wrenches
™
Features:
• Allows access into tighter areas and reduces user fatigue.
• Frameless motor with replaceable brushes for
extended tool durability and life.
• Textured ant‑slip comfort grip provides maximum comfort.
Drive Size: 1/2 in
Drive Type: Square
Speed: 0 rpm ‑ 2,400 rpm
Cycle Rate: 0 blows/min ‑ 2,700 blows/min
Torque: 145.00 ft lb
Length: 5 3/4 in
Includes: 1 Hour Charger; Heavy‑Duty Kit Box; (2) 12V Li‑Ion™ Batteries
SKU
115‑DC822KL
524
Voltage
18.00 V
Batt. Type
Li‑Ion
Impact Wrenches
Features:
• Sturdy impact wrench provides 434 ft‑lbs of
deliverable torque in forward and reverse.
• Easy forward or reverse, can run on AC or DC current.
• Ball bearing construction for increased durability.
• Externally replaceable brushes allow for quick repairs on the jobsite.
Speed: 1,600 rpm
Cycel Rate: 1,800 blows/min
Torque: 434 ft lb
Amps: 7.5 A
Length: 13 in
Cord Length: 13 in
Includes: 360° Side Handle
SKU
115‑DW297
ORSNASCO.COM
Drive Size
3/4 in
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
DeWalt® Cordless
Impact Wrenches
Features:
• Preferred rocker switch design
for fast and easy fastening.
• Comfort grip provides maximum comfort.
• Durable magnesium gear case and all metal
transmission for extended durability.
• Heavy‑duty impacting mechanism
directs torque to fastener without kickback.
Voltage: 18 V
Batt. Type: Lithium‑Ion
Drive Type: Square
1/2” Square Drive Impact Wrenches
Features:
• Soft‑grip handle.
• Metal gear and transmission housing.
• Ergonomically balanced center grip.
Test & Approvals: Complies with OSHA and UL Requirements
Retainer Type: Detent Pin
Speed: 0‑1,800 rpm (no load)
Cycel Rate: 2,600 ipm
Voltage Type: AC/DC
Length: 11 5/8 in
Cord Length: 11 5/8 in
Control Type: On/Off/Reverse
Handle Type: Centered Pistol Grip
Includes: 2‑Wire Fixed Cord
SKU
Drive Size
495‑9070‑20
1/2 in
Drive Type
Square
Torque
300 ft/lb
Voltage
120 V
Control
Cycle
Drive Retainer
Includes
Torque
Speed
Type
Rate
Size
Type
Handle Type: Anti‑Slip Grip
(2) 18V XRP™
0‑
Detent 2,400 2,700
Batteries; 1 Hour
125 ft lb Trigger
115‑DC823KA 3/8 in
Pin
rpm blows/
Charger; Heavy‑
min
Duty Kit Box
1 Hour Charger;
3,600in
Rocker (2) XRP™ Batteries;
Detent 1,650 2,600
lb; 300
115‑DW059K‑2 1/2 in
Switch Heavy‑Duty Kit
Pin
rpm
ipm
ft lb
Box
Handle Type: T‑Handle; Anti‑Slip Grip
1 Hour Charger;
1,920 in
0‑
(2) XRP™ Batteries;
Detent 2,100
3,000 lb; 160 Trigger
115‑DC821KA 1/2 in
Pin
rpm
Heavy‑Duty Kit
ft lb
ipm
Box
Heavy‑Duty
0 ipm‑
Kit Box; 1 Hour
1,740
Detent 2,400
Trigger
2,700
115‑DC820KA 1/2 in
Charger; (2) XRP™
in lb
Pin
rpm
ipm
Batteries
SKU
Amps
7A
Features:
• Dewalt® exclusive
NANO™‑phosphate lithium ion
cells offer long battery life &
durability: 2,000 recharges.
• Heavy‑duty all‑metal anvil provides
durability and prevents shearing.
• High power, high efficiency motor
delivers maximum performance
in all fastening applications.
• Variable speed reversible switch provides full‑range
control for both setting and removing fasteners.
• Electric brake allows for precise setting of fasteners.
Voltage: 36 V
Batt. Type: Phosphate Lithium‑Ion
Retainer Type: Detent Pin
Speed: 1,400 rpm
Cycle Rate: 2,500 ipm
Torque: 325 ft lb
Control Type: Rocker Switch
Handle Type: Anti‑Slip Grip
Includes: 1 Hour Charger; (2) Lithium Ion Batteries; Heavy‑Duty Kit Box
3/4” Square Drive Impact Wrenches
Features:
• All‑metal housing.
• Soft‑grip handle.
• Ergonomically balanced center grip.
• Lockable forward/reverse switch.
• Friction ring and through hole rocket retention.
Test & Approvals: Complies with OSHA and UL Requirements
Retainer Type: Friction Ring
Speed: 1,750 rpm
Cycel Rate: 1,000 ‑ 2,600 ipm (no load)
Voltage Type: AC/DC
Length: 11 5/8 in
Cord Length: 11 5/8 in
Control Type: On/Off/Reverse
Handle Type: Centered Pistol Grip
Includes: 2‑Wire Fixed Cord
SKU
495‑9075‑20
Drive Size
3/4 in
© 2016
Power Tools MPI 2016 Sect 1 V2.indd 525
Drive Type
Male Square
Torque
300 ft/lb
Voltage
120 V
POWER TOOLS
NANO™ Cordless
Impact Wrenches
Amps
7A
SKU
115‑DC800KL
1.800.678.6577
Drive Size
1/2 in
Drive Type
Square
525
5/10/16 10:32 AM
POWER TOOLS
Industrial
Welding
Oilfield
M18 FUEL™ 7/16” Hex Utility Impacting Drills
M18™ High Torque Impact Wrenches
Features:
• Superior performance maximum fastening torque, up to
2X more runtime and up to 3X longer motor life.
• POWERSTATE™ Brushless Motor runs cooler with no wearable components.
• REDLINK PLUS™ Intelligence allows the operator to choose between 2
fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature.
• REDLITHIUM™ XC 4.0 Battery Packs provides superior pack construction,
electronics and performance to deliver 2X more runtime.
Batt. Type: REDLITHIUM™
Control Type: Variable Speed Trigger
Handle Type: Non‑Slip; Soft Grip
Includes: (1) M18 FUEL™ Utility Impacting Drill (2765‑20); (2) M18™
REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48‑11‑1840); (1) M18™
& M12™ Multi‑Voltage Charger (48‑59‑1812); Carrying Case
Features:
• Battery fuel gauge.
• Compact and lightweight.
• Milwaukee 4 pole frameless motor.
• Powerful impact mechanism.
Voltage: 18 V
Speed: 1,900 rpm
Control Type: Variable Speed Trigger
Handle Type: Non‑Slip; Soft Grip
Batt. Type: Lithium‑Ion
SKU
495‑2662‑20
495‑2663‑22
SKU
495‑2765‑22
Drive Size
7/16 in
Drive Type
Hex
Torque
500 ft lb
Voltage
18 V
495‑2663‑20
495‑2662‑22
495‑2664‑22
POWER TOOLS
Safety
Drive
Size
Drive
Type
Retainer
Type
Cycle
Rate
2,200
1/2 in Square Detent Pin
ipm
2,200
1/2 in Square Friction Ring
ipm
2,200
1/2 in Square Friction Ring
ipm
0‑2,200
1/2 in Square Detent Pin
ipm
0‑2,200
3/4 in Square Friction Ring
ipm
Construction
Torque
Includes
450 ft lb
Bare Tool
(2) XC Batteries; 1‑Hour
450 ft lb
Charger; Carrying Case
450 ft lb
Bare Tool
(2) XC Batteries; 1‑Hour
Charger; Carrying Case
(2) XC Batteries; 1‑Hour
525 ft‑lb
Charger; Carrying Case
450 ft‑lb
M18 FUEL™ High Torque
Cordless Impact
Wrenches
Features:
• Superior performance of maximum
fastening and nut‑busting torque
with up to 2X more runtime.
• POWERSTATE™ Brushless Motor runs cooler with no wearable components.
• REDLINK PLUS™ Intelligence allows the operator to choose between 2
fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature.
• REDLITHIUM™ XC 4.0 Battery Packs provides superior pack construction,
electronics and performance to deliver 2X more runtime.
Voltage: 18 V
Retainer Type: Friction Ring
Speed: 1,700 rpm
Control Type: Variable Speed Trigger
Handle Type: Non‑Slip; Soft Grip
Includes: M18 FUEL™ High Torque Impact Wrench; (2) M18™ REDLITHIUM™ XC
4.0 Extended Capacity Battery Pack (48‑11‑1840); M18™ & M12™ Multi‑Voltage
Charger (48‑59‑1812); Carrying Case
SKU
495‑2763‑22
495‑2764‑22
526
Drive Size
1/2 in
3/4 in
Drive Type
Square
Square
Batt. Type
Lithium‑ion
REDLITHIUM™
Torque
700 ft/lb
750 ft lb
V28™ Cordless Impact Wrenches
Features:
• Reversible battery pack.
• Hanger bracket w/solid steel ring.
• Magnesium gear case for added durability and lighter weight.
Batt. Type: Lithium‑Ion
Retainer Type: Detent Pin
Torque: 325 ft lb; 3,900 in lb
Control Type: Variable Speed Trigger
Handle Type: Non‑Slip; Soft Grip
Includes: (2) Batteries; 1‑Hour Charger; Impact Resistant Carrying Case
SKU
495‑0779‑22
ORSNASCO.COM
Drive Size
1/2 in
Drive Type
Square
Voltage
28 V
Speed
1,450 rpm
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Knurled Nuts
FINISHING TOOLS
Features:
• Replacement piece.
• Two holes, one on each side
for spanner wrench.
• Compatible with a variety of
DeWalt angle grinders.
Engravers
SKU
115-636226-00
Engravers
Features:
• Stroke adjustment dial regulates engraving depth.
• Light and compact design for precision engraving.
• Engraves metal, glass, wood, plastic, and ceramics.
• Soft grip has been added to provide extra control and comfort.
Voltage: 120 VAC
Power Source: Electric
SKU
Cycle Rate
114-290-05*
7,200 strokes/min
114-290-01
7,200 strokes/min
* Includes: (3) 9924 Carbide Engraving Points
Frequency
60 Hz
60 Hz
Grinders
Carbon Steel Brush
Type 1 Metal Thin
Cut-Off Wheels
Features:
• Thin cut-off wheels
with a .045” wheel
design for fast, burr-free cutting.
• Proprietary aluminum oxide grain combination for agressive cutting action.
• Proprietary material mix ensures durable long life wheels.
• Uses two full sheets of fiberglass for durability and safety.
SKU
115-DW8062
115-DW8851
115-DW8725
Dia.
4 1/2 in
4 1/2 in
6 in
Speed
13,300 rpm
13,300 rpm
10,000 rpm
Type
Grinding Wheel; Type 1
Cutting Wheel; Type 1
Grinding Wheel; Type 1
POWER TOOLS
Features:
• Sturdy carbon brush is great for
everyday usage.
• Fits a variety of DeWalt® grinder products.
• Convenient brush works with most DeWalt® grinders.
Wire Material: Copper
Type: Replacement Brush
SKU
115-650916-01
High-Performance Metal
Grinding/Cutting Wheels
Features:
• High-performance grinding/cutting
wheels employ a thin .045” wheel
design for fast, burr-free cutting.
• Specially treated grain combination
for aggressive cutting action.
• Proprietary material mix ensures
durable long life wheels.
• Uses two full sheets of fiberglass for durability and safety.
Speed: 13,300 rpm
Type: Grinding Wheel; Type 27
SKU
115-DW8424
115-DW4514
© 2016
Power Tools MPI 2016 V1 Sect. 2.indd 527
Dia.
4 1/2 in
4 1/2 in
Corded Small Angle Grinders
Features:
• Directed air flow diverts dust away from switch
and vital components to extend tool life.
• Service Minder™ brushes eliminate guesswork, stops
tool when preventative maintenance is required.
• Gear housing rotates 90 degrees for better ergonomics
and control in cutting applications.
Speed: 11,500 rpm
Spindle Thread: 5/8 in - 11 UNC
Includes: Backing Flange; Lock Nut; Spanner Wrench; Guard
SKU
114-AG40-85P
114-AG40-85
1.800.678.6577
Wheel Dia
4 1/2 in
4 1/2 in
Amps
8.5 A
8.5 A
Control Type
Paddle Switch
Slide Switch
527
5/26/16 11:02 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Large Angle Grinders
Features:
• Reinforced armature windings —
protects motor against abrasive dust
and metal debris.
• Vibration control on side and main handles — provides
uncompromising user comfort for extended periods of work.
• Tool-free adjustment guard — quick guard installation and adjustments.
• Service Minder™ brushes — eliminates guesswork, stops
the tool when preventive maintenance is required.
• Precision spiral bevel gears — quality engineering and
construction for smooth power transmission.
Test & Approvals: Double Insulated; UL Listed; Complies to OSHA
Control Type: Lock on/off switch
Includes: 3 Position Side Handle; 9 in. Guard; Spanner Wrench
SKU
114-1893-6
Wheel Dia
9 in
Amps
15 A
Speed
6,000 rpm
Spindle Thread
5/8 in - 11
POWER TOOLS
Small Angle Grinders
114-1375A
Wheel
Amps
Dia
4 1/2 in
6A
114-1380SLIM 4 1/2 in 7.5 A
Spindle
Thread
5/8 in - 11
UNC
5/8 in - 11
Includes
Guard; 2 Position Side Handle; Flange Kit;
Spanner Wrench; Abrasive Wheel
Abrasive Wheel; Auxiliary Handle; Flange
Kit; Spanner Wrench; Wheel Guard
4.7HP Large Angle Grinders
Features:
• Motor provides overload protection.
• Dust Ejection System™.
• Anti-Vibe trigger handle.
• Lightweight design.
• Automatic turn-off brushes.
Watts: 3,450 W
Spindle Thread: 5/8 in - 11
SKU
Wheel Dia Amps
Speed
115-DWE4557
7 in
15 A 8,500 rpm
115-DWE4559N
9 in
15 A 6,500 rpm
528
Features:
• Motor provides overload protection.
• Epoxy-coated motor.
• Low-profile gearcase.
• Automatic turn-off brushes.
• 2-position side handle.
Watts: 3,000 W
Spindle Thread: 5/8 in - 11
SKU
Features:
• Ergonomic slim grip adds comfort and
convenience for all day use.
• Powerful motor provides the ability
to grind various materials and
applications with ease and speed.
• Directed air flow diverts dust away from
vital components and extends tool’s life.
• Removable brush covers allows easy and fast tool brush replacements.
• Reinforced wheel guard provides maximum safety
to users under different work conditions.
• Lock-on side switch ideal for continuous operation all day long.
Test & Approvals: Double Insulated; UL Listed; Complies to OSHA
Speed: 11,000 rpm
Control Type: Lock-On/Off Switch
SKU
4HP Large Angle Grinders
Control Type
Lock-On;
Trigger
Trigger
Includes
7” Guard; 3 Position
Side Handle
9” Guard; 3 Position
Side Handle
Speed
Control Type
115-DWE4517
Wheel Dia Amps
7 in
15 A
8,500 rpm
Trigger
115-DWE4519
9 in
15 A
6,500 rpm
Lock-On;
Trigger
Includes
7” Guard; 2 Position Side
Handle
9” Guard; 2 Position Side
Handle
5.3HP Large Angle Grinders
Features:
• Epoxy coated field and armature provide long service
life against abrasion from airborne debris.
• Keyless adjustable guards allow for guard
adjustments to be made without tools.
• Rotating rear handle provides improved ergonomics
in cutting and grinding applications.
• Automatic turn-off brushes shut down the tool when
brushes need to be changed to avoid tool damage.
• Low profile gearcase allows for work in tight areas.
• 5 position side handle provides improved
ergonomics for specific applications.
• 2 wire double insulated ‘S’ jacket rubber cord provides
increased durability and life in hot and cold climates.
• 6,000 rpm provides optimal material removal with 9 in grinding wheels.
• Motor provides overload protection.
Watts: 3,950 W
Speed: 6,000 rpm
Control Type: Lock-On; Trigger
Spindle Thread: 5/8 in - 11
Includes: 5 Position Side Handle; 7 & 9 in. Guards; 7” & 9” Guard
SKU
115-D28499X
ORSNASCO.COM
Wheel Dia
7 in; 9 in
Amps
15 A
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
High Performance
Angle Grinders
Features:
• Dust Ejection System™ provides durability by ejecting damaging dust
and debris particles that enter the tool through the air intake vents.
• Quick-Change™ Wheel Release allows tool free wheel removal.
• Dual abrasion protection provides increased motor protection.
• One-piece brush arm prevents brush hang-up due to dust ingestion.
• Vibration-reducing side handle.
• Low profile, jam-pot gear case provides precise gear alignment for a
smoother, quieter transmission while allowing access to tight spaces.
• Auto-off brushes shut the tool down when the brushes
need replacing to avoid tool damage.
• Keyless adjustable guard provides tool-free guard adjustment.
Watts: 1,700 W
Spindle Thread: 5/8 in - 11
Includes: 2 Position Side Handle; Wrench
SKU
Wheel Dia Amps
Speed
115-D28115
4.5 in
13 A
9,000 rpm
115-D28131
4.5 in
13 A 11,000 rpm
115-D28114
4.5 in
13 A 11,000 rpm
115-D28115N 4.5 in; 5 in 13 A
9,000 rpm
115-D28065
9,000 rpm
5 in; 6 in
13 A
No-Lock On Trigger Grip
Control
Includes
Type
Trigger
5“ Keyless Adjustable Guard
Lock-On
Depressed Center Wheel;
Slide Switch Keyless Adjustable Guard
Paddle
5“ Keyless Adjustable Guard
Switch
Trigger;
;5“. Keyless Adjustable
No-Lock
Guard
5“ Keyless Adjustable Guard;
Trigger
6” Keyless Adjustable Guard
High-Performance Cut-Off
Tool/Angle Grinders
Features:
• Dual Clutch Protection™ prevents the
gears from stripping and motor from burning up in
a wheel pinch/stall increasing durability.
• Dust Ejection System™ provides durability by ejecting damaging dust
and debris particles that enter the tool through the air intake vents.
• Quick-Change™ Wheel Release allows tool free wheel removal.
• Dual abrasion protection provides increased motor protection.
• One-piece brush arm prevents brush hang-up due to dust ingestion.
• Vibration reducing 2-position side handle.
• Low profile, jam-pot gear case provides precise gear alignment.
• Auto-off brushes shut the tool down when the brushes
need replacing to avoid tool damage.
• Keyless adjustable guard provides tool-free guard adjustments
Watts: 1,700 W
Speed: 9,000 rpm
Spindle Thread: 5/8 in - 11
SKU
Wheel
Amps
Dia
115-D28144N 6 in
115-D28144
6 in
Includes
13 A
Paddle Switch;
No Lock
13 A
Paddle Switch
2-Position Side Handle; 5 in Keyless
Adjustable Guard; Wrench
2-Position Side Handle; Type 1 Cutting
Wheel; Depressed Center Wheel;5 in
Keyless Adjustable Guard; Wrench
Power Tools MPI 2016 V1 Sect. 2.indd 529
SKU
Wheel
Dia
Amps Watts
Speed
115-DW831
5 in
12 A
1,837 10,000
W
rpm
115-DW840
7 in
13 A
2,250
W
8,000
rpm
Includes
Depressed Center Wheel; Wrench;
Backing Flange; Clamp Nut; Tool-Free
Guard; 2 Position Side Handle
Depressed Center Wheel; Wrench;
Backing Flange; Clamp Nut; Guard; 2
Position Side Handle
Small Angle Grinders
Features:
• Low profile gear case allows tool to fit into tight spaces.
• Quick-Change™ Wheel Release provides easier and quicker
wheel removal without the need for a wrench.
• Designed for faster material removal and higher overload protection.
Spindle Thread: 5/8 in - 11
Wheel
Amps Watts Speed
Dia
Control
Type
7A
850 12,000
W
rpm
Slide
Switch
115-DWE4214 4.5 in 11 A
1,400 11,000
W
rpm
Paddle
115-DWE402G 4.5 in 11 A
1,400 11,000
W
rpm
Slide
Switch
9A
1,140 12,000
W
rpm
One-Touch™ Guard; Hex
Wrench
9 Amp With No Lock-On
4 1/2
9A
115-DWE4120N
in
11 Amp
Lock-On;
Paddle
Switch
1,140 12,000
W
rpm
Paddle
Switch
One-Touch™ Guard; Hex
Wrench
Lock-On;
Paddle
Switch
One-Touch™ Guard; Hex
Wrench
Paddle
Switch
One-Touch™ Guard; Hex
Wrench
SKU
115-DWE4011
4 1/2
in
9 Amp
115-DWE4120
115-DWE402
Control Type
© 2016
Features:
• AC/DC capacity works off welding
machines and generators for increased
productivity and versatility.
• Rear handle design for greater comfort and control.
• External brush doors for easy servicing.
• Motor provides high speed for fast material removal.
• Sealed ball and roller bearings for extended motor life.
• High power-to-weight ratio for greater efficiency and reduced user fatigue.
Control Type: Spindle Lock
Spindle Thread: 5/8 in - 11
POWER TOOLS
Paddle
115-D28114N 4.5 in; 5 in 13 A 11,000 rpm Switch;No 5“ Keyless Adjustable Guard
Lock
No-Lock On Trigger Grip
5“ Keyless Adjustable Guard;
115-D28065N 5 in; 6 in 13 A 9,000 rpm
Trigger
6” Keyless Adjustable Guard
Medium Angle Grinders
4 1/2
in
1,400 11,000
4 1/2
11 A
W
rpm
in
11 Amp with No Lock-On
1,400 11,000
4 1/2
11 A
115-DWE402N
W
rpm
in
1.800.678.6577
Includes
2 Position Side Handle;
Depressed Center Wheel;
One-Touch™ Guard; Wrench
One-Touch Guard; 2-Position
Side Handle; Wrench; 3-Wire
Grounding Plug
One-Touch Guard; 2-Position
Side Handle; Wrench
529
5/10/16 10:44 AM
POWER TOOLS
Industrial
Wheel Dia
4 1/2 in
Amps
9.5 A
POWER TOOLS
4 1/2” Angle Grinders
SKU
458-GA5020
Features:
• Labyrinth construction seals motor
and bearings from contamination.
• Powerful motor with protective zigzag
varnish to keep dust and debris out.
• Super Joint System® (SJS) technology helps prevent motor and gear
damage by allowing the drive shaft to slip if the wheel is forced to a stop.
Speed: 10,000 rpm
Control Type: Paddle; On/Off
Spindle Thread: 5/8 in - 11 UNC
Wheel
Dia
458-9557PBX1 4 1/2 in
458-9557PB
4 1/2 in
Amps
Includes
(5) Grinding Wheels; (1) Diamond Wheel; Side Handle
(153489-2); Wheel Guard (125273-5); Lock Nut
7.5 A
Wrench (782422-3); Lock Nut (193465-4); Inner
Flange (224399-1); Aluminum Case
Grinding Wheel (741424-8-1); Lock Nut Wrench
(782422-3); Lock Nut (193465-4); Side Handle
7.5 A
(153489-2); Inner Flange (224399-1); Wheel Guard
(125273-5)
Features:
• Lightweight for high production
work with less fatigue.
• Side handle can be installed
on either side of the tool.
• Spindle lock for easy wheel changes.
• All ball bearing construction for longer tool life.
• Lock-on button for continuous operation.
Speed: 10,000 rpm
Control Type: On/Off
Spindle Thread: 5/8 in - 11 UNC
Includes: 5 in. Grinding wheel (741407-8); Side Handle (273480-5); Lock Nut
(224509-0); Lock Nut Wrench (782412-6); Inner Flange (224178-7); Spindle
Washer 0(261039-0); Wheel Guard (164556-8)
530
Construction
Wheel Dia
5 in
Wheel Dia
5 in
Amps
10.5 A
6” Angle Grinders
Features:
• Gear housing can be rotated 90°.
• Powerful motor with protective zig-zag
varnish to keep dust and debris out.
Speed: 10,000 rpm
Control Type: Trigger
Spindle Thread: 5/8 in - 11 UNC
Includes: Grinding Wheel (A-80846); Inner Flange (224361-6); Lock Nut
(224658-4); Lock Nut Wrench (782424-9); Side Handle (153504-2); Wheel
Guard (165488-2)
SKU
458-GA6010Z
Wheel Dia
6 in
Amps
10.5 A
7 in Angle Grinders
5” Angle Grinders
SKU
458-9005B
Oilfield
Features:
• Built in SJS™ technology mechanical clutch system that
helps prevent motor and gear
damage by allowing the drive shaft to slip if the wheel is forced to stop.
• Electric brake for maximum productivity.
• “Tool-less” wheel guard for more convenient adjustments.
• Spiral bevel gears for smoother rotations and
a more efficient transfer of energy.
• Zig-zag varnish protects the armature coil from
dust and debris for longer motor life.
• Labyrinth construction prevents debris from penetrating
the motor, bearings and gears for longer tool life.
• Externally accessible brushes for greater serviceability.
Speed: 11,000 rpm
Control Type: Trigger
Spindle Thread: 5/8 in - 11 UNC
Includes: Grinding Wheel (741407-8); Inner Flange (224399-1); Lock Nut
(193465-4); Lock Nut Wrench (782424-9); Side Handle (153504-2); Tool-Less
Guard (163474-7)
Features:
• Durable, powerful disc grinder that
is suitable for the toughest jobs.
• Specially sealed
armature coil reduces wear caused by ingested debris.
• Lightweight design allows easy maneuverability.
• Removable side handle adds control and comfort.
Watts: 2,100 W
Speed: 11,000 rpm
Control Type: Paddle
Spindle Thread: 5/8 in - 11
Includes: Wrench; Side Handle
SKU
Welding
5” Angle Grinders
with Built in SJS™
Disc Grinders
SKU
361-G12SE2
Safety
Features:
• Enlarged all ball bearing
construction for longer tool life.
• Spiral bevel gears for smoother
rotations and a more efficient
transfer of energy.
• Zigzag varnish protects
the armature coil from dust and debris for longer motor life.
Speed: 6,000 rpm
Control Type: On/Off
Spindle Thread: 5/8 in - 11 UNC
458-GA7911
Wheel
Dia
7 in
458-GA7001L
7 in
SKU
Amps
9A
ORSNASCO.COM
Amps
Includes
15 A
Side Handle; Spindle Washer
7 in x 7/8 in x 1/4 in Grinding Wheel, 24 Grit, General
Purpose Metal; 7 in Wheel Guard; Inner Flange; Lock
Nut; Lock Nut Wrench; Side Handle; Spindle Washer
15 A
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Marathon Medium Angle Grinders
6” Angle Grinders
Features:
• 6” Angle Grinder, featuring a
13.5 Amp, 1,550 Watt, 9,600 rpm
LongLife motor.
• Ergonomically designed body, quickest wheel change system
available, tool-free quick-positioning guard, anti-vibration side
handle, and advanced designs to optimize air flow for cooler
operation and extend longevity in harsh environments.
• S-Automatic Safety Slip Clutch helps to prevent kickback.
• Electronic features include speed stabilization, overload
protection, power interruption protection and soft start.
Speed: 9,600 rpm
SKU
Wheel
Amps Watts
Dia
Control
Type
Paddle
Switch,
NonLocking
Spindle
Thread
Includes
6 in
469-WE15-150Q
6 in
13.5 A
Sliding
1550
Switch w/ 5/8 in-11
W
Lock
469-WEPBA17-150Q
6 in
14.5 A
1,700
W
Paddle
Switch
5/8 in-11
Features:
• 4.5 in Angle Grinder, featuring
an 8.5 Amp, 900 Watt, AC/DC,
10,500 rpm LongLife motor.
• Ergonomically designed body,
quickest wheel change system available, tool-free quick-positioning
guard, and advanced designs to optimize air flow for cooler
operation and extend longevity in harsh environments.
• S-Automatic Safety Slip Clutch helps to prevent kickback.
Watts: 900 W
Speed: 10,500 rpm
Amps: 8.5A
Wheel
Dia
Control Type
Spindle
Thread
469-W9-115Q 4 1/2 in
Sliding Switch
w/Lock
M14
469-WP9-115Q 4 1/2 in
Paddle Swtich,
Non-Locking
M14
Lock-on Slide
Switch
—
469-W9-115
4 1/2 in
© 2016
Power Tools MPI 2016 V1 Sect. 2.indd 531
Wheel Dia
6 in
Amps
12 A
5/8 in - 11 Non-locking Paddle
900 Watt 4 1/2 in
Angle Grinders
SKU
SKU
469-W14-150
POWER TOOLS
469-WEP15-150Q
1550
13.5 A
W
6” Type-27 Guard;
6” Type-1 Clip-On
Cut-Off Guard;
Anti-Vibration
Side Handle; Inner
Flange, Quick
Flange Nut
6” Type-27 Guard;
Anti-Vibration
Side Handle; Inner
Flange; Quick
Flange Nut
Features:
• Metabo Marathon motor with
patented dust protection for
long service life.
• Swiveling main handle: High safety
and better handling when cutting.
• Metabo VibraTech (MVT) side handle for vibration
damping and protection of the user’s health.
• Twist-proofed tool-free adjustable guard.
• Metabo safety switch prevents unintentional start.
• Auto-stop carbon brushes to protect the motor.
Watts: 1,400 W
Speed: 9,700 rpm
Spindle Thread: 5/8 in - 11
Includes: Guard; Inner support flange; Quick flange nut; Side handle Metabo
VibraTech (MVT)
4-1/2” & 5” Small Angle Grinder/Sanders
Features:
• More copper means more power.
• 24% larger bevel gear that gives more durability.
• 100% tool free even hubbed products.
• Advanced airflow design.
Test & Approvals: Complies with OSHA and UL Requirements
Speed: 11,000 rpm
Spindle Thread: 5/8 in - 11
SKU
Wheel
Amps Watts
Dia
495-6146-30 4 1/2 in 11 A
Includes
4 1/2 in Type-27 Guard; Ergonomic
Side Handle; Inner Support Flange;
Quick Flange Nut
4 1/2 in Type-27 Guard; Ergonomic
Side Handle; Inner Support Flange;
Quick Flange Nut
4 1/2 in Type-27 guard; Ergonomic
side handle; Inner support flange;
Quick flange nut
495-6146-31 4 1/2 in 11 A
495-6147-30 4 1/2 in 11 A
495-6147-31 4 1/2 in 11 A
495-6121-31A
495-6117-30
1.800.678.6577
5 in
5 in
11 A
13 A
Control
Type
1,400 Paddle;
W
Lock-On
1,400
W
1,400
W
1,400
W
1,400
W
2,100
W
Paddle;
No-Lock
Paddle;
Lock-On
Paddle;
No-Lock
Trigger
Paddle;
Lock-On
Includes
Contractor Bag; Type 27 Guard;
Grinding Wheel; Side Handle; Spanner
Wrench; Flanges
Type 27 Guard; Side Handle; Spanner
Wrench; Flanges
Type 27 Guard; Side Handle; Spanner
Wrench; Flanges
Type 27 Guard; Side Handle; Spanner
Wrench; Flanges
Type 27 Guard; Side Handle; Spanner
Wrench; Flanges
Type 27 Guard; Side Handle; Spanner
Wrench; Flanges
531
5/10/16 10:44 AM
POWER TOOLS
Industrial
Features:
• Debris baffles protect internal components by deflecting
damaging debris out of the airflow at the intake vents.
• Burst resistant guard has positive detents that hold the guard in place.
Test & Approvals: Complies with OSHA and UL Requirements
Spindle Thread: 5/8 in - 11
Wheel
Amps Watts Speed
Dia
750 11,000
495-6130-33 4 1/2 in 7 A
W
rpm
495-6140-30 4 1/2 in 7.5 A
Welding
Oilfield
Construction
4-1/2 in Angle
Grinders
4-1/2” Small Angle
Grinders/Sanders
SKU
Safety
Control Type
Includes
Side Handle; Spanner
Slide Switch
Wrench; Type 27 Guard
Flanges; Side Handle;
Lock-On;
825 10,000
X-Large Paddle Spanner Wrench; Type
W
rpm
27 Guard
Switch
Features:
• Ergonomic balance/soft grip handle.
• Heavy-duty metal gear housing for added durability.
• Tool-less guard adjustment quickly adjusts for increased versatility.
Test & Approvals: Double Insulated; UL Listed; Complies to OSHA
Speed: 11,000 rpm
Spindle Thread: 5/8 in - 11
SKU
Wheel
Amps Watts
Dia
Control
Type
Includes
Abrasive Wheel; Auxiliary Handle;
Lock-On/Off
Flange Kit; Spanner Wrench; Wheel
114-9295-01 4 1/2 in 6 A 720 W
Switch
Guard
No-Lock;
Adjustable Guard; Flange Kit;
1,100
Paddle
114-9296-01 4 1/2 in 7.5 A
Owners Manual; Wrench
W
Switch
POWER TOOLS
6” Grinders
Features:
• More copper means more power.
• 24% larger bevel gear that
gives more durability.
• 100% tool free even hubbed products.
• Electronics with Overload Protection and electronic clutch.
• Advanced airflow design.
• Constant power technology.
• Anti-Vibration handle.
Test & Approvals: Complies with OSHA and UL Requirements
Watts: 2,100 W
Speed: 9,000 rpm
Spindle Thread: 5/8 in - 11
Includes: Flanges; Side Handle; Spanner Wrench; Type 1 Guard
SKU
495-6161-30
495-6161-31
Wheel Dia
6 in
6 in
Amps
13 A
13 A
M18 FUEL™ 4-1/2”/5”
Cordless Grinders
Control Type
Lock-On; Paddle
Paddle; Trigger
7”/9” Large
Angle Grinders
Features:
• Soft grip handle.
• Spiral bevel gears that decreases
noise and reduces vibration.
• Tool free burst resistant guard.
Test & Approvals: Complies with OSHA and UL Requirements
Watts: 3,130 W
Speed: 6,000 rpm
Spindle Thread: 5/8 in - 11
Includes: Flanges; Side Handle; Spanner Wrench; 7 & 9 in. Type 27 Guards
SKU
495-6088-30
495-6088-31
532
Wheel Dia
7 in; 9 in
7 in; 9 in
Amps
15 A
15 A
Control Type
Lock-On; Trigger
Trigger
Features:
• 100% tool free: Make all accessory changes and guard
adjustments without a wrench for increased productivity.
• DURABILITY: Same metal housing & gearing system as
legendary high performance corded grinders.
• POWERSTATE™ Brushless Motor: Delivers maximum
power and up to 10X longer motor life.
• REDLINK PLUS™ Intelligence provides optimized performance,
electronic clutch and overload protection using total system
communication between tool, battery and charger.
Batt. Type: REDLITHIUM™
Length: 18 1/2 in
Control Type: Slide w/ Lock-On
Includes: (1) M18 FUEL™ 4 1/2”/5” Grinder; (2) M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack (48-11-1840); M18™ & M12™ Multi-Voltage
Charger (48-59-1812); Flange Nut; Wheel Guard; Spanner Wrench; Carrying Case
SKU
495-2781-22
Voltage
18 V
Spindle Thread
5/8 in - 11
M18™ Cordless Cut-Off/Grinders
Features:
• L-shaped debris baffles.
• Milwaukee 4 pole frameless motor.
• Overload protection.
• Tool-free burst resistant guard.
Batt. Type: Lithium-Ion
Control Type: Paddle
Includes: (2) XC Batteries; 1-Hour Charger; Contractor Bag; Side Handle;
Spanner Wrench; Type 1 & 27 Guards; Type 1 Cut0ff Wheel
SKU
495-2680-22
ORSNASCO.COM
Voltage
18 V
Spindle Thread
5/8 in - 11
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Pedestals
Features:
• This portable grinder pedestal stand
positions your machine right where you
need it for the most efficient use.
• Features include a heavy duty cast iron
construction and a big steel column to
withstand heavy workplace abuse.
Height: 32 7/8 in
Used With: 6 in; 7 in.; 8 in.; 10 in
SKU
110-GA16
Bench Grinders
Length
15 3/4 in
6” Industrial Grinders
SKU
110-612
Wheel Diam
6 in
SKU
115-DW756
115-DW758
Wheel Diam
6 in
8 in
Arbor Diam
0.5 in
0.625 in
Speed
3,450 rpm
3,600 rpm
Power Cap.
5/8 hp
3/4 hp
POWER TOOLS
Features:
• Built for rugged, heavy-duty grinding,
industrial-grade, split-phase motor won’t
burn out even if repeatedly overloaded.
• Slim design of motor provides extra
clearance for grinding odd-shaped pieces.
• Two-piece, adjustable tool rests permit
vertical and horizontal adjustments - can be tilted for angle grinding.
Test & Approvals: CSA; UL Listed; OSHA
Arbor Diam: 1/2 in
Speed: 3,600 rpm
Power Cap.: 1/3 hp
Phase: Single
Voltage: 115 V
Frequency: 60 Hz
Cord Length: 8 ft
Includes: (1) 36 & 60 Grit Grinding Wheels; GA10 Eyeshields; Pressed Steel
Tool Rests; Non-Exhaust Type Guards
Features:
• 12 1/2” distance between wheels for
longer and larger grinding applications.
• Adjustable tool resets.
• Industrial cast iron base and motor housing
provide durability and prolong life.
• Precision-machined aluminum tool rests allow
the user to accurately position work.
• Rear exhaust ports in wheel guards for smoother operation.
Applications: Grinding; Deburring; Sharpening; Shaping;
Polishing; Grading; Rust Removal
Includes: 36 Grit Wheel; 60 Grit Wheel; Eye Shields; Spark Deflectors; Tool
Rests; Adjusting Wrench
Wheel Width
3/4 in
8” Industrial Grinders
Features:
• Two wheels.
• Wheel guards and tool
rests are cast iron.
• Guards are exhaust type.
• Designed to comply with OSHA
standards under normal usage.
Test & Approvals: UL Listed; OSHA
Arbor Diam: 3/4 in
Speed: 3,600 rpm
Power Cap.: 3/4 hp
Phase: Single
Voltage: 115 V; 230 V
Frequency: 60 Hz
Cord Length: 8 ft
Applications: Grinding
Includes: (1) 36 & 60 Grit Grinding Wheels; Cast Iron Exhaust Type Guards;
Cast Iron Tool Rests; GA11 Eyeshields
SKU
110-8107W
Wheel Diam
8 in
© 2016
Power Tools MPI 2016 V1 Sect. 2.indd 533
Wheel Width
1 in
Industrial Bench Grinders
Features:
• Dust collecting port.
• Totally enclosed pre-lubricated
ball bearings.
• Rubber mounts prevent movement.
• Heavy-duty guarded toggle switch.
• Cast iron wheel guards and dust vents.
Test & Approvals: UL
Speed: 3,450 rpm
Phase: Single
Voltage: 115 VAC
Frequency: 60 Hz
Cord Length: 6 ft
Wheel Wheel Arbor Power
Diam Width Diam Cap.
825-577102 8 in
1 in 5/8 in 1 hp
SKU
825-577103 10 in
1.800.678.6577
1 in
1 in
1 1/2
hp
Includes
Grinder; Hardware
Bench Grinder; Wheel Guards & Dust Vents;
Spark Guards; Large Eye Shields; Adjustable
Tool Rests; Grinding Wheels
533
5/10/16 10:44 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Slide-Switch Die Grinders
1 1/2 in Die Grinders
Features:
• Motor provides high power and speed for all 1 1/2 in grinding applications.
• AC/DC capacity works off welding machines and generators
for increased productivity and versatility.
• Precision 1/4 in collet securely holds all proper accessories
(1/8 in reducing sleeve as optional accessory)
Watts: 350 W
Amps: 4.2 Amps
Speed: 25,000 rpm
Includes: (2) Wrenches; Collet
SKU
115‑DWE4887N
115‑DWE4887
Collet Size
1/4 in
1/4 in
Wheel Diam
1 1/2 in
1 1/2 in
POWER TOOLS
Collet Size
1/4 in
Wheel Diam
1 1/2 in
Die Grinders
Features:
• Heavy‑duty aluminum gear cases.
• Strong, lightweight, glass reinforced
nylon motor housings and handles.
• High efficiency fans.
• Long life brush system.
• All ball and roller bearings.
Test & Approvals: Complies with OSHA and UL Requirements
Wheel Diam.: 2 in
Features:
• Motor provides high
power and speed for 6”
grinding applications.
• AC/DC capacity works off welding machines and generators
for increased productivity and versatility.
• Rotating adjustable guard for greater visibility.
• External brush caps for easy servicing.
• Motor provides high power and speed for all 1
1/2 to 2 1/2” grinding applications.
Watts: 2,250 W
Amps: 13 Amps AC/DC
Speed: 5,700 rpm
Control Type: Trigger Switch
Includes: Wrench; Arbor Nuts; Flanges
SKU
115‑DW882
SKU
1/4 in
2 in
115‑DW880
—
2 1/2 in
Speed
Control
Type
Toggle
Switch
495‑5196 1/8; 1/4 in 11 Amps 14,500 rpm On/Off
Includes
1/4 in. Collet; 11/16 in. Open
End Wrench; 1/2 in. Open End
Wrench
1/4 in. Collet; 11/16 in. Open
End Wrench; 1/2 in. Open End
Wrench
1/4 in. Collet; 11/16 in. Open
End Wrench; 1/2 in. Open End
Wrench; 1 in. Open End Wrench
Straight Grinders
Features:
• Long life brush system.
• Coated spindle housing for
cool gripping surface.
• High‑impact resistant tool rest.
• Strong, lightweight, glass filled nylon handles.
• Aluminum gear case.
• Hardened helical‑cut alloy steel gears and shaft.
Test & Approvals: Complies with OSHA and UL Requirements
Voltage: 120 V
Voltage Type: AC/DC
Frequency: 60 Hz
Control Type: On/Off
Handle Type: Back Body Grip
Features:
• Motor provides high power and speed for all 1
1/2 to 2 1/2” grinding applications.
• AC/DC capacity works
off welding machines and
generators for increased
productivity and versatility.
• Rotating adjustable guard
for greater visibility.
• External brush caps for easy servicing.
Watts: 485 W
Amps: 5 Amps AC/DC
Speed: 19,000 rpm
Control Type: Trigger Switch
115‑DW888
Amps
495‑5192 1/8; 1/4 in 4.5 Amps 21,000 rpm
Wheel Diam
6 in
Collet Size Wheel Diam
Collet Size
495‑5194 1/8; 1/4 in 4.5 Amps 21,000 rpm Paddle
Heavy-Duty Die Grinders
534
SKU
458‑GD0601
Control Type
Paddle; No‑Locking
Paddle Switch with Lock‑On Button
Die Grinders
SKU
Features:
• Vented exhaust to direct dust
away from the tool and user.
• Zig‑Zag protective motor
varnish for longer tool life.
Amps: 3.5 Amps
Speed: 25,000 rpm
Control Type: Slide Switch
Includes: Collet
Includes
(2) Wrenches; 1/4 in. Collet and 1/8 in.
Reducing Sleeve
(2) Wrenches; Arbor Nuts; Flanges
SKU
495‑5211
495‑5243
ORSNASCO.COM
Wheel Diam.
3 in
6 in
Arbor Diam
3/8 in
5/8 in
Speed
14,500 rpm
5,500 rpm
Amps
11 A
15 A
Length
21 in
22 in
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Rotary Tools
Sanders
Heavy-Duty Cut-Off Wheels
Features:
• Made of a hard abrasive material
that’s used for slicing and cutting
metal, including hardened steel.
• Makes it easy to cut bolts or screws,
or make slots in rusted or stripped
bolts and screws to allow for easy removal with a screwdriver.
• Cuts only along its edge.
Speed: 30,000 rpm
Type: Cut-Off Wheel
Used With: Mandrel 402
Includes: (20) Cut-Off Wheels
SKU
114-420
Electric Dynafile® II Abrasive Belt Sanders
Features:
• Utilizes coated abrasive and non-woven nylon belts.
• For deburring, grinding, blending, finishing and surface prepping.
• Suitable for metal, plastic, fiberglass, stone and glass applications.
• Reversible side handle.
Amps: 6 A
Voltage: 120 V
Control Type: Lock-On Switch
Handle Type: Side
Applicable Materials
Sheet Metal; Plastic; Thin Wood
3000 Series Rotary Tools
Features:
• Dependable product with replaceable
motor brushes.
• Electronic feedback for consistent
power at lower and mid-range speeds.
• High performance motor supports
tough applications.
• Maximum comfort for improved control.
Amps: 1.2 A
Speed: 5,000 rpm - 32,000 rpm
Includes: (24) Assorted Accessories; Carrying Case; (1) Attachment
Cord Length: 6 ft
Control Type: Variable Speed
Features:
• High quality raw materials for
consistent performance.
• Steel reinforced.
Speed: 12,000 rpm
Material: Phenolic
Voltage
120 VAC
SKU
115-DW4945
Features:
• 360 degree grip zone allows grip
anywhere on tool.
• Dependable product with replaceable
motor brushes.
• Electronic feedback for consistent
power at lower and mid-range speeds.
• High performance motor supports
tough applications.
Amps: 1.6 A
Speed: 5,000 rpm - 35,000 rpm
Cord Length: 6 ft
Control Type: Variable Speed
Handle Type: Body Grip
Dia.
4 1/2 in
Polypropylene Pad Kits
SKU
Voltage Frequency
Includes
114-4000-2/30 120 VAC 60 Hz
Carrying Case; (30) Assorted Accessories; Planer
Carrying Case; Circle Cutter Attachment;
Cutting Guide; Flex Shaft; Planer; (50) Assorted
114-4000-6/50 120 VAC 60 Hz
Accessories; Detailers Grip Attachment; Sanding/
Grinding Attachment
Power Tools MPI 2016 V1 Sect. 2.indd 535
Belt Width
1/4 in - 3/4 in
Rubber Backing Pads
4000 Series Rotary Tools
© 2016
Belt Length
18 in - 24 in
POWER TOOLS
SKU
114-3000-1/24
SKU
415-40610
Features:
• Lightweight.
• allows versatility for grinders.
For Model: 6140-6
Speed: 13,000 rpm
Material: Polypropylene
SKU
495-49-36-3455
1.800.678.6577
Dia.
4 1/2 in
Thread-TPI or Pitch
5/8 in - 11
535
5/10/16 10:44 AM
POWER TOOLS
Industrial
HAMMER DRILLING & DEMOLITION TOOLS
Safety
Welding
Oilfield
Construction
Rotary Hammers
Hammer Drills
Bulldog™ SDS-plus® Rotary Hammers
Carbide Hammer Drill Bit Sets
Features:
• Innovative tip configuration reduces walking for improved accuracy.
• Improved carbide tip provides up to 2X longer life.
• Optimum grade of carbide provides maximum durability.
• Unique flute design efficiently removes dust reducing bit binding.
Cutting Diam: 3/16 in;1/4 in;5/16 in;3/8 in;1/2 in
Bit Length: 2 in; 4 in
Shank Type: 3-Flat
Shank Diam: 3/8 in
Finish: Silver
Applicable Material: Masonry
Width: 6.63 in
Height: 7.75 in
POWER TOOLS
SKU
Type
Includes
3/16 x 3 in. Carbide Hammer Drill Bit; 1/4 x 4 in. Carbide
Hammer Drill Bit; 1/4 x 6 in. Carbide Hammer Drill Bit; 5/16 x 6
115-DW5207 Percussion
in. Carbide Hammer Drill Bit; 3/8 x 6 in. Carbide Hammer Drill
Bit; 1/2 x 6 in. Carbide Hammer Drill Bit
Features:
• Tool free bit changes with automatic bit locking, dust
protection and maximum impact energy transfer rate.
• 2-Mode Selector - Easily converts from rotary hammer to rotation only.
• SDS-plus® bit system.
Speed: 0 rpm - 1,300 rpm
Cycle Rate: 0 blows/min - 5,800 blows/min
Impact: 2.2 ft lb
Cutting Cap.: 1 in (concrete); 1/2 in (steel); 1 in (wood)
Amps: 7.2 A
Voltage: 120 VAC
Control Type: Variable Speed; Reversing Trigger
Handle Type: D-Handle; Side Handle
Includes: 360° Auxiliary Handle; Depth Gauge; Carrying Case
SKU
114-11255VSR
Drive Size
1 in
Drive Type
SDS Plus
SDS Plus Hex Bit Kits
M18 FUEL™ 1/2 in Hammer
Drill/Driver Kit
Features:
• Carbide tip design maximizes carbide
surface contact for longer bit life.
• Hex shank interlocks with drive
sleeve, allowing for quick change
from drilling to driving.
• Drivers automatically disengage when
screw is seated to prevent overdriving.
Cutting Diam: 5/32 in; 3/16 in
Bit Length: 7 in
Overall Length: 7 in
Shank Type: Hex
Shank Diam: 5/32 in; 3/16 in
Finish: Carbide Tipped
Applicable Material: Concrete; Masonry
Width: 5/32 in; 3/16 in
Height: 7 in
SKU
Type
115-DW5366
SDS Hex
Bit Kit
536
Includes
5/32 in x 4 in x 7 in, 3/16 in x 4 in x 7 in ; Drive Sleeve;
Percussion Bit Holder; Insert Bit Adapter; #2 & #3 Insert
Bits; 1/4 in & 5/16 in Nutsetter; Hex Key; Medium tough
CASE®
Features:
• REDLINK PLUS™ Intelligence
provides optimized performance
and overload protection using total
system communication between
tool, battery and charger.
• Multi-voltage charger, so you can charge all M12™
and M18™ batteries with one charger.
• REDLINK PLUS™ Intelligence provides optimized
performance and overload protection using total system
communication between tool, battery and charger.
Batt. Type: Lithium-ion
Speed: 0 rpm - 1,850 rpm
Cycle Rate: 31,450 blows/min
Length: 8.100 in
Includes: Multi-Voltage Charger; 2 Batteries
SKU
495-2604-22
ORSNASCO.COM
Voltage
18 V
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Varitemp® Heat Guns
HEATING TOOLS
Features:
• Adjustable non‑slip stand.
• Lockable variable temperature control
allows you to dial‑in any temperature from ambient
to 1000°F/540°C, and lock it in.
• Powerful high speed universal motor.
• Sturdy die cast housing.
• Use to activate adhesives, defrost frozen coils, heat sensitive
material, melt solder, soften plastics and more.
Test & Approvals: UL Listed
Velocity: 3,000 ft/min
Fan Speed: Single
Outlet Size: 1 in
Cord Length: 6 ft
Control Type: Switch (3 Pos‑Off/On/Heat); Variable Temperature
Heat Guns & Torches
SKU
Ecoheat Heat Guns
™
SKU
Operating Temp.
467‑EC‑100
1,000 °F
Velocity
1,020 ft/min
Voltage
120 VAC
Frequency
50 Hz; 60 Hz
Master Heat Guns®
© 2016
Power Tools MPI 2016 V1 Sect. 2.indd 537
Flow
23 CFM
23 CFM
23 CFM
Amps
12 A
14 A
14.50 A
Watts
1,440 W
1,680 W
1,740 W
Voltage
Frequency
Amps
Watts
220 VAC
120 VAC
50 Hz
60 Hz
7A
14.5 A
1,680 W
1,740 W
Milwaukee® Heat Guns
Features:
• Impact resistant heating element.
• Soft air velocity: Reaches required working surface
temperature faster then conventional heat guns.
• Maintains temperature for fast completion of work.
• Cool air inlet design.
• Support stand.
Test & Approvals: Complies with OSHA and UL Requirements
Voltage: 120 VAC
Frequency: 60 Hz
Amps: 11.6 A
SKU
Operating Temp.
495‑8975‑6
570; 1,000 °F
495‑8977‑20 100 ‑ 1,040 °F
Features:
• Powerful high speed universal motor.
• Sturdy die cast housing.
• Adjustable non‑slip stand.
• Use to bend plastics, cure adhesives,
dry parts, heat parts, shrink tubing
and packaging, strip paint and more.
Test & Approvals: UL Listed; cUL Listed
Velocity: 3,000 ft/min
Voltage: 120 VAC
Frequency: 60 Hz
Fan Speed: Single
Outlet Size: 1 in
Cord Length: 6 ft
Control Type: Variable Temperature; Switch (3 Pos‑Off/On/Heat)
Handle Type: Pistol Grip
SKU
Operating Temp.
467‑HG‑301A
500 °F
467‑HG‑501A
750 °F
467‑HG‑751B
1,000 °F
Flow
23 CFM
23 CFM
Flow
14.8 CFM
14.8 CFM
Control Type
On/Off ‑ 2 Temperatures; On/Off Speed
On/Off ‑ 2 Temperatures
POWER TOOLS
Features:
• Resettable thermostat—Protects element against over heating.
• Built‑in hand guard.
• 3‑wire grounded cord set—A positive grounding system for user safety.
• Built‑in stand.
• Use to bend and form plastics, dry body fillers, remove decals,
spot dry paint, shrink tubing, packaging and more.
Test & Approvals: UL Listed; cUL Listed
Amps: 10 A
Fan Speed: Dual
Outlet Size: 1 in
Cord Length: 6 ft
Control Type: Switch (3 Pos‑Off/On/On)
Handle Type: Pistol Grip
467‑VT‑752C
467‑VT‑750C
Operating
Temp.
750 °F
1,000 °F
Soldering Irons
Foamtips™ Swabs
Features:
• Constructed from medical grade foam which
features the best open cell structure, providing
excellent particle entrapment characteristics.
• The foam is thermally bonded to the
swab handle without using adhesives.
• These swabs are ideal for general cleaning applications.
Wt.
4.55 lb
4.80 lb
4.65 lb
SKU
471‑CF2050
1.800.678.6577
537
5/26/16 11:32 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
Ultrajet® 70 Duster
Features:
• Ozone safe, CFC/HCFC free.
• Safe for most plastics.
• Nonflammable.
• 10-oz aerosol duster removes dry
contaminants without residue.
• Safe on plastics, nonflammable, and CFC/HCFC-free.
Ultratorches
Features:
• Built-in fuel filter for consistent fuel
ignition.
• Built-in window indicates fuel level.
• Dual function soldering iron and heat tool.
• Use to pinpoint heat, remove surface mount components,
repair vinyl, shrink heat shrinkable tubing, solder & desolder,
spot dry, strip insulation with hot knife and more.
• Convenient On/Off gas control and adjustable temperature control.
• Durable tank has built-in fuel filter.
• Copper-based tips provide long life and high thermal
conductivity, excellent with lead-free solder.
Test & Approvals: UL Listed
Gas Type: Butane
Output Power: 80 W
Run Time: 120 min
Includes: Steel Case; Shrink Attachment; Sponge; Open End Wrench; Ejector;
Ultratip Soldering Tip; 3W772; Soldering and Hot Air Tips; Shrink Attachment
and Metal Case
Body Material: Metal
Length: 10.3 in
SKU
471-ES1015
Butane Refill Canisters
Features:
• Contains no CFC’s.
• Non-clogging formula.
• Special vapor pressure promotes consistent ignition.
• Triple refined to burn cleaner, prolonging the life of the tool.
Used With: All Master Appliance Butane-Powered Tools
Capacity Vol.: 5 1/8 oz
POWER TOOLS
SKU
467-51773-24
SKU
467-UT-100SIK
Operating Temp.
482 °F - 1,202 °F
Capacity Vol.
0.20 oz
Soldering Iron Handle
Features:
• Durable, balanced handle features cool,
“soft touch” acid and flux-resistant grips.
• Accommodates the full range of Weller® heaters and integral heater tips.
For Model: Weller® SL325, SL335, SL345, SL500 Modular Soldering Irons
Type: Two-Wire Soldering Handle
SKU
185-7760
Pyropen® Professional Self-igniting
Cordless Butane Soldering Irons
Features:
• Ignites with a push of a button.
• Lightweight and completely portable.
• Ready to use in 30 seconds.
• Sturdy metal tank holds enough gas for 3 hours of operation.
• Does not require cords, batteries or cartridges.
• Ignites with the push of a button, ideal for field service jobs.
• 14 soldering tip combinations available.
• Inactive hot air nozzles (1202°F) are available.
• Refills with butane fuel - Weller® Cat.no. WB1 or WB2.
Test & Approvals: UL Listed
MT-51 Series Microtorch®
Features:
• May be hand-held or used “hands-free” on
table top, per its wide, stable base.
• Built-in, self-igniting system with safety lock that
ensures the switch is not turned on when not in use.
• Built-in “refillable” plastic fuel tank.
Test & Approvals: Meets CPSC Requirements; CSA; TUV/GS
Includes: Built in Refillable Fuel Tank; Hands Free Lock
SKU
Operating Temp.
467-MT-51
2,500 °F
538
Gas Type
Butane
Run Time
2h
Length
3 in
Body Material
Plastic
SKU
185-WPA2
ORSNASCO.COM
Operating Temp.
482 °F - 932 °F
© 2016
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
MULTI-PURPOSE POWER TOOLS
Combo Kits Cordless
Super-Pro Self-Igniting
Butane Soldering Iron Kits
Features:
• Self‑igniting portable butane heat tool‑professional quality.
• Features “Auto Switch” safety shut‑off, iron
plated tips and built in butane filter.
• Butane fuel level is visible through a window on the body of the tool.
• Operates up to 2 hours per refill.
• Refills with butane fuel ‑ Weller® no.WB1 or WB2.
• For such uses as anti‑static soldering, heat shrink and cutting rope.
• Rugged stainless‑steel body provides up to 125 watts of power.
• Adjustable temperature up to 1,076°F.
• Contains: iron, sponge, stand and extra tips packed in a plastic case.
Includes: Plastic Case; Stand; Sponge; Soldering Iron; Tips
Body Material: Stainless Steel
SKU
185‑PSI100K
Operating Temp.
1,076 °F
18V XRP™ Two Tool
Combo Kit
Features:
• Kit includes two tough tools to get more done.
• Reciprocating saw has keyless blade
clamp that allows for quick blade
change without touching blade or reciprocating shaft.
• Variable speed with trigger lock for more precise cutting.
• Hammerdrill has patented three‑speed all‑metal transmission
and heavy‑duty metal ratcheting chuck.
• LED worklight improves visibility in tight spaces.
• Includes charger, two batteries and 360° side handle.
Batt. Cap.: 2.4 A‑h
Includes: XRP 18V batteries, one‑hour universal charger,
360° side handle and carrying bag
SKU
115‑DCK251X
Soldering Stations
Voltage
18 V
Batt. Type
Ni‑Cad
20V MAX* Cordless Combo Kits
SKU
Voltage
115‑DCK280C2
20 V
115‑DCK290L2
20 V
Analog Soldering Stations
Features:
• New receptacle for easier iron replacement.
• Designed for continuous production soldering.
• Slim, comfortable pencil, with ETA tip, reduces operator fatigue.
• Tip temperature offset capability allows user to reset
station temperature to match in tip sizes & styles.
• Iron is fitted with a non‑burnable silicon rubber cord for safety.
• ESD safe to protect sensitive components.
• For continuous production soldering.
• Innovative heater/sensor combination provides
rapid heatup and temp recovery.
• Uses Weller® ET series soldering tips.
• Test & Approvals: cUL Listed; UL Listed
Voltage: 120 V
Voltage Output: 24 V
Includes: Sponge; WES51PU Power Unit; PES51 Soldering Pencil; PH50 Stand
SKU
185‑WES51
© 2016
Power Tools MPI 2016 V1 Sect. 2.indd 539
Operating Temp.
350 °F ‑ 850 °F
Watts
50 W
Batt. Type
Batt.
Cap.
Includes
DCD780 1/2” Drill/Driver; DCF885 1/4”
Impact Driver; (2) 20V MAX* Lithium
Lithium‑Ion 1.5 A‑h
Ion 1.5 Ah Battery Packs; Fast Charger;
(2) Belt Hooks; Bit Holder; Kit Box
1/2 in Compact Drill; 1/4 in Impact
Driver; 2 20 V 3.0aph Battery; Fast
Lithium‑Ion 3 A‑h
Charger; Belt Hook; Contractor Bag;
360° Degree Side Handle
POWER TOOLS
Features:
• We constantly improve the battery and the
tool, because the battery alone can’t give you
what you need.
• With a complete range of heavy‑duty cordless
solutions, you have what you need for any type
of job on the site.
20V MAX* Lithium Ion
Compact Drill/Driver Kits
Features:
• High performance motor delivers 300
unit watts out (UWO) of power ability for
completing a wide range of applications.
• Compact, lightweight design fits into tight areas.
• Ergonomic handle delivers comfort and control.
Batt. Cap.: 1.5 Ah
Includes: DCD771 1/2 in Drill Driver; (2) 20V Max* Compact Lithium Ion
Batteries; Compact Charger; Contractor Bag
SKU
115‑DCD771C2
1.800.678.6577
Voltage
20 V
Batt. Type
Lithium‑Ion
539
5/26/16 11:36 AM
POWER TOOLS
Industrial
Safety
Welding
Oilfield
Construction
20V MAX* Lithium
Ion Grinder Tool Kits
Features:
• Provides high-power for cutting and grinding applications.
• Quick-Change™ Wheel Release allows for tool-free
wheel changes without the need for a wrench.
• Tool-free guard allows for quick and easy guard adjustments/positioning.
• 2-finger trigger switch (w/ lock-off button) allows for
convenient activation and easier gripping.
• 2-position side handle offers greater control, comfort and versatility.
Batt. Cap.: 5 A-h
Includes: DCG412 Grinder; (2) DCB205 20V MAX* XR Premium Li-Ion Battery;
Fast Charger; Spanner Wrench; 5 inch Type 27 Grinding Guard; 2-Position Side
Handle; Contractor Bag
SKU
115-DCG412P2
Voltage
20 V
Batt. Type
Lithium-Ion
POWER TOOLS
Features:
• Electronically controlled to optimize battery energy
use for up to 50% longer run time per charge.
• Eliminates carbon brushes, which enables the BL™ Motor
to run cooler and more efficiently for longer life.
• Efficiently uses energy to match torque and RPM to
the changing demands of the application.
Includes: Brushless Hammer Driver-Drill - XPH06Z; Brushless Impact Driver XDT08Z; (2) 18V LXT® Battery - BL1830; Rapid Optimum Charger - DC18RC
Voltage
18 V
Batt. Type
Lithium-Ion
Features:
• Durability, performance and innovation.
• Reliable.
SKU
495-2691-22
18 V
495-2697-22
18 V
Batt. Cap.
3 A-h
Features:
• Four-Pole Frameless Motor features a robust design for longer life,
more power and more runtime than any brushed competitor.
• Milwaukee® designed Impact Mechanism delivers maximum
power and application speed for greater efficiency on the job.
• REDLINK™ Intelligence provides optimized performance
and overload protection using total system communication
between tool, battery and charger.
• DRIVE CONTROL™ techology provides two speed/torque modes,
allowing class-leading control for greater application versatility.
• The Hex Impact Driver features an LED Light to illuminate work surfaces,
and includes an all-metal, reversible belt clip for temporary tool storage.
Includes: (1) M18 2-Speed 1/4” Hex Impact Driver (2657-20); (2) M18™
REDLITHIUM™ XC Extended Capacity Battery (48-11-1828); (1) M18™ & M12™
Multi-Voltage Charger (48-59-1812); (1) Belt Clip; (1) Carrying Case
540
Batt. Type
RedLithium™
Includes
(2) M18™ RED LITHIUM™ Compact Battery
Packs; 1-Hour Charger; Hard Carrying
Lithium-Ion 1.5 A-h
Case; M18 Compact Drill/Driver; M18
Compact Impact
M18 Hammer Drill/Driver; M18 Compact
Lithium-Ion 3 A-h Impact; (2) XC Batteries; 1-Hour Charger;
Contractor Bag
Voltage
18 V
Batt. Type
Lithium-Ion
M28™ Cordless
Grinder/Cut-Off Tool Kit
Hex Impact Driver Kit
Voltage
18 V
Batt.
Cap.
Features:
• Milwaukee® 4-Pole Frameless Motor: Features
a robust design with rare-earth magnets.
• Compact Design: Allows greater
accessibility in tight work spaces.
• All-Metal Gear Case and Chuck: Provide
maximum impact and shock durability.
• REDLINK™ Intelligence: Advanced
overload protects the tool against
abusive situations and provides maximum life.
Batt. Cap.: 3 A-h
Includes: (2) M18™ REDLITHIUM™ XC Extended Capacity Batteries; (1) M18™ &
M12™ Multi-Voltage Charger; (1) Carrying Case
SKU
495-2607-22
SKU
495-2657-22
Voltage Batt. Type
M18™ Cordless Compact
Hammer Drill/Driver Kit
LXT Brushless
Cordless Combo Kits
SKU
458-XT248
M18™ Cordless Combo Kits
Batt. Cap.
3 A-h
Features:
• Overload protection for
preventing over-heating.
• Soft start reduces start-up
torque and improves gear life.
• Large spindle lock for quick wheel replacement.
• Tool free guard provides easy guard adjustment.
• Slide on switch reduces user fatigue.
• Fuel gauge indicates remaining run time.
Batt. Cap.: 3 A-h
Includes: (1) M28™ Cordless LITHIUM-ION Grinder / Cut-Off Tool (0725-20);
(1) M28 REDLITHIUM™ Battery Pack (48-11-2830); (1) Contractor Bag
(48-55-3490); (1) 28-Volt Charger (48-59-2819); (1) Cut-Off Wheel (Type 1)
(49-94-4500); (1) Grinding Wheel (Type 27) (49-94-4520)
SKU
495-0725-21
ORSNASCO.COM
Voltage
28 DC
Batt. Type
Lithium-Ion
© 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement