zacuto universal base plate
Operating your Universal Baseplate
1 Align the 1/4”-20 screw and the locking pin to the holes
underneath the camera and tighten the camera to the
Included Parts:
x2 12” Iris Rod
x1 Universal Baseplate
x1 5/32” Allen
Slideable 1/4”-20 Camera
Screw (Included)
Camera Locking Pin
Adjustable Iris
Additional T-Slides
are available for
cameras that
require them
Vertical Adjustability
Horizontal Adjustability
2 Center the camera lens between the iris rods
Tig h te n
Adjustable rods for
optional accessory
1/4”-20 and 3/8”-16 Tripod Holes
loosen to adjust red plate horizontally
3 Adjust the height of the plate
Use optional matte box to center height of lens
4 Attach tripod quick release plate to the baseplate with 1/4”-20 holes
Optional Zeddie Wedgie is available
for use with VCT-U14 camera plates
For more information,
watch our tutorial video
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF