ZTE Blade Q Mobile phone Quick start guide

ZTE Blade Q Mobile phone Quick start guide
ZTE Blade Q
Mobile phone
Quick start guide
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any
form or by any means, either electronic or
mechanical, including photocopying and
microfilm, without the prior written permission
of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modifications to print errors or update
specifications in this guide without prior
notice.
We offer self-service for our smart terminal
device users. Please visit the ZTE official
website (at www.ztedevice.com) for more
information on self-service and supported
product models. Information on the website
takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any
liability for faults and damage caused by
unauthorised modifications to the software.
Images and screenshots used in this guide
may differ from the actual product. Content in
this guide may differ from the actual product
or software.
Trademarks
ZTE and the ZTE logos are trademarks of
ZTE Corporation. Google and Android are
trademarks of Google, Inc. The Bluetooth®
trademark and logos are owned by Bluetooth
SIG, Inc. and any use of such trademarks by
ZTE Corporation is under licence.
The microSD logo is a trademark of
SD-3C, LLC.
Other trademarks and trade names are the
property of their respective owners.
Version no.: R1.0
Published: 10/2013
Manual no.:
Product safety information
Do not use hand-held while
driving
Do not use while refuelling
For body-worn operation,
maintain a separation of 15 mm
This device may produce a
bright or flashing light
Small parts may cause a choking
hazard
Do not dispose of it in a fire
This device may produce a loud
sound
To prevent possible hearing
damage, do not listen at high
volume levels for long periods
Avoid contact with magnetic
media
Avoid extreme temperatures
Keep away from pacemakers
and other personal medical
devices
Avoid any contact with liquid;
keep it dry
Switch off when instructed in
hospitals and medical facilities
Do not attempt to disassemble
Switch off when instructed on
aircraft and in airports
Only use approved accessories
Switch off in explosive
environments
Do not rely on this device for
emergency communications
Getting to know your phone
Headset
LED light
Power key
Earpiece
Front camera
Volume key
Touch screen
Menu key
Back key
Home key
Back camera
Flash
Back cover
Speaker
Charger/USB jack
Power key
• Press and hold to power on, select phone
modes, turn flight mode on/off or power
off.
• Press to turn the screen display on or off.
Home key
• Touch to return to the home screen from
any application or screen.
• Touch and hold to search or open
Google.
Menu key
• Touch to get the options for the current
screen.
• Touch and hold to see recently used
applications.
Back key
Touch to go to the previous screen.
Volume up/Volume down
Press or hold to turn the volume up or down.
Starting up
Switch off your phone before installing or
replacing the battery or the SIM card. The
microSD card is optional and can be installed
and removed while the phone is turned on.
Unmount the microSD card before removing
it.
1. Place your finger in the slot of the back
cover to lift and remove the cover.
2. Hold the SIM card with its cut corner
oriented as shown and slip it into the card
holder.
3. Hold your microSD card with the metal
contacts facing down and slide it into the
microSD card slot.
4. Align the connectors on the phone and
the battery and slide the battery into the
compartment. Then gently press the
battery down until it is secured.
5. Press the cover gently back into place
until you hear a click.
Charging the battery
1. Connect the adapter to the charging jack.
Ensure that the adapter is inserted with
the correct orientation. Do not force the
connector into the charging jack.
2. Connect the charger to a standard AC
power outlet.
3. Disconnect the charger when the battery
is fully charged.
Powering your phone on/off
Make sure the battery is charged before
powering on.
• Press and hold the Power Key to turn on
your phone.
• To turn it off, press and hold the Power
Key to open the options menu. Touch
Power off > OK.
Declaration of RoHS
compliance
To minimise the environmental impact and
take more responsibility for the earth we
live on, this document shall serve as a
formal declaration that the ZTE Blade Q
manufactured by ZTE CORPORATION is in
compliance with Directive 2011/65/EU of the
European Parliament - RoHS (Restriction of
Hazardous Substances) with respect to the
following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers (PBDEs)
The ZTE Blade Q manufactured by ZTE
CORPORATION meets the requirements of
EU Directive 2011/65/EU.
10
Disposal of your old appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product,
it means the product is
covered by European
Directive 2012/19/EU.
2. All electrical and
electronic products
should be disposed
of separately from the
municipal waste stream
via designated collection
facilities appointed by
the government or local
authorities.
3. The correct disposal of
your old appliance will
help prevent potential
negative consequences
for the environment and
human health.
For recycling information for this product
based on the WEEE directive, please send
an email to weee@zte.com.cn
11
SAR
Your mobile device is a radio transmitter
and receiver. It is designed not to exceed
the limits for exposure to radio waves
recommended by international guidelines.
These guidelines were developed by the
independent scientific organisation ICNIRP
and include safety margins designed
to ensure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement
known as Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg
and the highest SAR value for this device
when tested was 1.357 W/kg. As mobile
devices offer a range of functions, they can
be used in other positions, such as on the
body.
As SAR is measured using the device’s
highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device
to ensure it only uses the minimum power
required to communicate with the network.
12
This equipment may be
operated in:
AT
BE
CY
CZ
DK
EE
FI
FR
DE
GR
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
SK
SI
ES
SE
GB
IS
LI
NO
CH
BG
RO
TR
13
EC DECLARATION OF
CONFORMITY
It is hereby declared that the following
designated product:
Product type: WCDMA/GSM (GPRS)
Dual-Mode Digital Mobile Phone
Model no.: ZTE Blade Q
Product description: WCDMA/GSM
(GPRS) Dual-Mode Digital Mobile Phone
Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC), Restriction of Certain
Hazardous Substances in electrical and
electronic equipment (Directive 2011/65/EU)
and Eco-design Requirements for EnergyRelated Products (Directive 2009/125/EC)
and their amendments.
This declaration applies to all specimens
manufactured that are identical to the
samples submitted for testing/evaluation.
Assessment of the product's compliance with
the requirements relating to Directive 1999/5/
EC was performed by BABT (Notified Body
No.1588) and assessment of the product's
14
compliance with the requirements relating to
Directive 2011/65/EU and Directive 2009/125/
EC was performed by the ZTE Corporation
Reliability Testing Centre. The assessments
were based on the following regulations and
standards:
Requirement
Standard
EN 50360–2001;
EN 62311-2008;
Health and
safety
EMC
EN 62209-1-2006;
EN 62209-2:2010;
EN 62479-2010
EN 50332-1: 2000;
EN 50332-2: 2003
EN 60950-1:2006+EN
60950-1:2006/A11:2009+
EN 60950-1:2006/
A12:2011+
EN 60950-1:2006/A1:2010;
EN 301 489-1 V1.9.2;
EN 301 489-3 V1.4.1;
EN 301 489-7 V1.3.1;
EN 301 489-17 V2.1.1;
EN 301 489-24 V1.5.1;
EN 55013: 2001+A2:2006
EN 55020:2007+A11:2011
15
Radio
spectrum
EN 301 511 V9.0.2;
EN 301 908-1 V5.2.1;
EN 301 908-2 V5.2.1;
EN 301 908-13 V5.2.1;
EN 300 328 V1.7.1
EN 300 440-1 V1.6.1;
EN 300 440-2 V1.4.1
RoHS
IEC 62321:2008
ErP
EN 62301
This declaration is the responsibility of the
manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech,
Industrial Park,
Nanshan District, Shenzhen, Guangdong,
518057, P.R.China
Authorised person signing for the company:
Xu Feng
Corporation
Quality Director, ZTE
Name in block letters & position in the
company
Shenzhen, 27 August 2013
Place & date
Legally valid signature
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising