Operating Instructions

Operating Instructions

Operating Instructions

Functional Manual

LCD Projector

Commercial Use

Model No.

PT-EZ770Z

PT-EW730Z

PT-EX800Z

Thank you for purchasing this Panasonic product.

This manual is common to all the models regardless of sufixes of the Model No.

z Without L : The standard zoom lens supplied

With L : The lens sold separately

Before operating this product, please read the instructions carefully and save this manual for future use.

Before using this product, be sure to read “Read this irst!” (x pages 2 to 11).

ENGLISH

TQBJ0636

Read this irst!

Read this irst!

WARNING:

THIS APPARATUS MUST BE EARTHED.

WARNING:

To prevent damage which may result in ire or shock hazard, do not expose this appliance to rain or moisture.

This device is not intended for use in the direct ield of view at visual display workplaces. To avoid incommoding relexions at visual display workplaces this device must not be placed in the direct ield of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2.

To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualiied service personnel.

3.

Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthingtype mains plug. This plug will only it an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

CAUTION:

To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modiications to this equipment could void the user’s authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic environment.

Directive 2009/125/EC

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

The lightning lash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

2 - ENGLISH

Read this irst!

CAUTION (North/Middle/South America)

Power Supply:

This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION:

The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, ire may result.

CAUTION (North/Middle/South America)

This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only it a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

f

Not for use in a computer room as deined in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

f

For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring.

f

For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

NOTICE USA only:

f

This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit

Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

ENGLISH - 3

Read this irst!

FCC NOTICE (USA)

Veriication

Model Number:

Trade Name:

PT-EZ770Z / PT-EZ770ZL / PT-EW730Z / PT-EW730ZL / PT-EX800Z / PT-EX800ZL

Panasonic

Responsible Party: Panasonic Corporation of North America

Address: Two Riverfront Plaza, Newark, NJ 07102-5490

Telephone number: (877)803-8492

E-mail: [email protected]

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized modiications.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modiications to this equipment could void the user’s authority to operate this device.

Product information (for Turkey only)

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

4 - ENGLISH

Read this irst!

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is itted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is reitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Center.

If the itted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be itted, please observe the wiring code as shown below.

If in any doubt, please consult a qualiied electrician.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

IMPORTANT:

The wires in this mains lead are coloured in accordance with the following code:

Green - and - Yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol

or coloured GREEN or GREEN -

AND - YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

B

S

13

63

/A

N

13A250V

HE-8

L

ASA

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Center

Winsbergring 15, 22525 Hamburg, Germany

ENGLISH - 5

Read this irst!

WARNING:

r POWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately.

Continued use of the projector in these conditions will result in ire or electric shock.

f

If foreign objects or water get inside the projector, cut off the power supply.

f f

If the projector is dropped or the cabinet is broken, cut off the power supply.

If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.

Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.

During a thunderstorm, do not touch the projector or the cable.

Electric shocks can result.

Do not do anything that might damage the power cord or the power plug.

If the power cord is used while damaged, electric shocks, short-circuits or ire will result.

f

Do not damage the power cord, make any modiications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.

Completely insert the power plug into the wall outlet and the power connector into the projector terminal.

If the plug is not inserted correctly, electric shocks or overheating will result.

f

Do not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not use anything other than the provided power cord.

Failure to observe this will result in ire or electric shocks. Please note that if you do not use the provided power cord to ground the device on the side of the outlet, this may result in electric shocks.

Clean the power plug regularly to prevent it from becoming covered in dust.

Failure to observe this will cause a ire.

f

If dust builds up on the power plug, the resulting humidity can damage the insulation.

f

If not using the projector for an extended period of time, pull the power plug out from the wall outlet.

Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.

Do not handle the power plug and power connector with wet hands.

Failure to observe this will result in electric shocks.

Do not overload the wall outlet.

If the power supply is overloaded (ex., by using too many adapters), overheating may occur and ire will result.

r ON USE/INSTALLATION

Do not place the projector on soft materials such as carpets or sponge mats.

Doing so will cause the projector to overheat, which can cause burns, ire or damage to the projector.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam, ex. a bathroom.

Using the projector under such conditions will result in ire, electric shocks or deterioration of components.

Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling to fall down.

Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.

Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.

6 - ENGLISH

Read this irst!

WARNING:

Do not cover the air intake/exhaust ports.

Doing so will cause the projector to overheat, which can cause ire or damage to the projector.

f

Do not place the projector in narrow, badly ventilated places.

f

Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.

f

Provide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm (20") of space between any walls or objects and the intake port.

Do not place your hands or other objects close to the air exhaust port.

Doing so will cause burns or damage your hands or other objects.

f

Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot withstand heat close to this port.

Do not look at or place your skin into the light emitted from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

f

Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.

f

Be especially careful not to let young children look into the lens. In addition, turn off the power and disconnect the power plug when you are away from the projector.

Never attempt to remodel or disassemble the projector.

High voltages can cause ire or electric shocks.

f

For any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not project an image with the lens cover attached.

Doing so can cause ire.

Do not allow metal objects, lammable objects, or liquids to enter inside of the projector. Do not allow the projector to get wet.

Doing so may cause short circuits or overheating, and result in ire, electric shock, or malfunction of the projector.

f

Do not place containers of liquid or metal objects near the projector.

f

If liquid enters inside of the projector, consult your dealer.

f Particular attention must be paid to children.

Use the ceiling mount bracket speciied by Panasonic.

Using the ceiling mount bracket other than the speciied one will result in falling accidents.

f

Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.

Installation work (such as ceiling mount bracket) should only be carried out by a qualiied technician.

If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.

f

Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the projector from falling down. (Install in a different location to the ceiling mount bracket.)

ENGLISH - 7

Read this irst!

WARNING:

r ACCESSORIES

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch ire.

f

Use AAA/R03/LR03 batteries.

f

Do not use unspeciied batteries.

f

Do not use chargeable batteries.

f

Do not disassemble dry cell batteries.

f

Do not heat the batteries or place them into water or ire.

f

Do not allow the + and – terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.

f

Do not store or carry batteries together with metallic objects.

f f

Store the batteries in a plastic bag and keep them away from metallic objects.

Make sure the polarities (+ and –) are correct when inserting the batteries.

f

Do not use a new battery together with an old battery or mix different types of batteries.

f

Do not use batteries with the outer cover peeling away or removed.

If the battery luid leaks, do not touch it with bare hands, and take the following measures if necessary.

f

Battery luid on your skin or clothing could result in skin inlammation or injury.

Rinse with clean water and seek medical advice immediately.

f

Battery luid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not remove unspeciied screws during the lamp unit replacement.

Doing so can cause electric shocks, burns, or injury.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

Lamp replacement

The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.

f

The lamp can easily explode if struck against hard objects or dropped.

f Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall outlet.

Electric shocks or explosions can result if this is not done.

f When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour before handling it otherwise it can cause burns.

Do not use the supplied power cord with devices other than this projector.

f

Using the supplied power cord with devices other than this projector may cause short circuits or overheating, and result in electric shock or ire.

Do not allow children to reach the batteries (AAA/R03/LR03).

Accidentally swallowing them can cause physical harm. f

If swallowed, seek medical advice immediately.

Remove the depleted batteries from the remote control promptly.

f

Leaving them in the unit may result in luid leakage, overheating, or explosion of the batteries.

8 - ENGLISH

Read this irst!

CAUTION:

r POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and ire, short-circuits or serious electric shocks will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall outlet.

Failure to do so may result in ire or electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.

Failure to do so may result in electric shock.

r ON USE/INSTALLATION

Do not place heavy objects on top of the projector.

Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.

Do not put your weight on this projector.

You could fall or the projector could break, and injury will result.

f Be especially careful not to let young children stand or sit on the projector.

Do not place the projector in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in ire.

f

Take particular care in locations exposed to direct sunlight or near stoves.

Do not place your hands in the openings beside the optical lens, while shifting the lens.

Failure to observe this could cause injury.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

f

Extremely strong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause damage to the object and can cause the set to malfunction.

f

Extremely strong light is emitted from the projector’s lens.

Always disconnect all cables before moving the projector.

Moving the projector with cables still attached can damage the cables, which will cause ire or electric shocks to occur.

When mounting the projector on the ceiling, keep mounting screws and power cord from contact with metal parts inside the ceiling.

Contact with metal parts inside the ceiling can cause electric shocks.

r ACCESSORIES

Do not use the old lamp unit.

If used it could cause lamp explosion.

If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces.

Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which contains nearly the same amount of mercury as luorescent lamps, and the broken pieces will cause injury.

f

If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical advice immediately.

f

Ask your dealer about replacing the lamp unit and check the inside of the projector.

When not using the projector for an extended period of time, remove the batteries from the remote control.

Failure to observe this will cause the batteries to leak, overheat, catch ire or explode, which may result in ire or contamination of surrounding area.

ENGLISH - 9

Read this irst!

CAUTION:

r MAINTENANCE

Do not attach the air ilter unit while it is wet.

Doing so may result in electric shock or malfunctions.

f

After you clean the air ilter units, dry them thoroughly before reattaching them.

Ask your dealer about cleaning inside the projector once a year.

Continuous use while dust is accumulated inside the projector may result in ire.

f

For cleaning fee, ask your dealer.

To remove the battery

Remote Control Battery

1. Press the guide and lift the cover.

(ii)

(i)

2. Remove the batteries.

10 - ENGLISH

Read this irst!

Brazil Only

Brasil Apenas

r

Manuseio de baterias usadas

BRASIL

Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada.

Cobrir os terminais positivo (+) e negativo (-) com uma ita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo. (Fig. 1)

Fig. 1

Como isolar os terminais

Fita Isolante

Fita Isolante

Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a garganta, daniicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem icar expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, daniicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente.

Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante

água. Caso haja irritação, consulte um médico.

r

Remoção das baterias

1. Pressione a guia e levante a tampa.

2. Remova as baterias.

(ii)

(i)

ENGLISH - 11

rTrademarks

f

Windows, Windows Vista, and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

f

Macintosh and Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

f PJLink TM

is a registered trademark or pending trademark in Japan, the United States, and other countries and regions.

f

HDMI, the HDMI Logo, and High-Deinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.

f

VESA and DisplayPort are trademarks or registered trademarks of the Video Electronics Standards Association.

f

RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.

Crestron Connected

TM

and Fusion RV are trademarks of Crestron Electronics, Inc.

f

Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc. in the

United Stated and/or other countries.

f

Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by Ricoh Company,

Ltd.

f

All other names, company names, and product names mentioned in this manual are trademarks or registered trademarks of their respective owners.

Please note that the

®

and

TM

symbols are not speciied in this manual.

rIllustrations in this manual

f

Illustrations of the projector, screen, and other parts may vary from the actual product.

rReference pages

f

Reference pages in this manual are indicated as (x page 00).

rTerm

f

In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

12 - ENGLISH

Features of the Projector Quick Steps

High luminance and high contrast

▶ A high luminance of 7 500 lm

*1

and a high contrast of 5 000:1 are achieved by means of a unique optical system and lamp drive system.

*1

For PT-EX800Z

7 000 lm for PT-EW730Z, and 6 500 lm for the PT-EZ770Z

For details, refer to the corresponding pages.

1. Set up the projector.

(x page 33)

2. Attach the Projection Lens.

(x page 41)

3.

Connect with external devices.

(x

page 42)

Easy and highly lexible setup

▶ Easy and highly lexible setup is achieved by DIGITAL LINK compatibility, an electric lens shift function, and a lineup of various optional lenses.

4. Connect the power cord.

(x page 47)

5. Switch on the projector.

(x page 48)

Reduced maintenance costs

▶ Maintenance costs are reduced by use of an extended-life ilter and a recommended lamp replacement interval of 4 500 H

*1

.

*1

When [LAMP POWER] is set to [ECO2]

This time is only the target for replacement and not the warranty time.

6. Make initial settings.

(x

page 24)

f Take this step when you switch on the power for the irst time after purchasing the projector.

Energy conservation achieved through the ECO function

▶ Lamp power is optimized according to the input image.

*1

Power consumption is also reduced by optimizing the lamp power according to the brightness of the setup installation location, state of the input signals and state of the video mute.

*2

*1

When [LAMP POWER] is set to [AUTO]

*2

When [ECO MANAGEMENT] is set to [ON]

7. Select the input signal.

(x

page 51)

8. Adjust the image.

(x

page 51)

ENGLISH - 13

Contents

Chapter 1 Preparation

Contents

Be sure to read “Read this irst!” from page 2.

24

24

Adjustment range by the lens position shift

52

53

53

30

30

Setting the ID number of the remote control 30

Chapter 2 Getting Started

Using the keystone distortion correction

Chapter 4 Settings

Connecting example: Twisted-pair-cable

14 - ENGLISH

Contents

102

102

106

106

109

109

[CLOSED CAPTION SETTING] (NTSC or 480i

YC

B

C

R

83

Connecting to a twisted-pair-cable transmitter

112

Chapter 5 Maintenance

129

When an indicator lights up

ENGLISH - 15

Contents

Before performing maintenance/replacement 131

Chapter 6 Appendix

16 - ENGLISH

Chapter 1

Preparation

This chapter describes things you need to know or check before using the projector.

ENGLISH - 17

Chapter 1

Preparation — Precautions for use

Precautions for use

Cautions when transporting

f

If you purchased the projector with the standard zoom lens, remove the lens cushion before use, and store it for the future use. When transporting the projector, move the lens to the home position and attach the lens cushion and the lens cover.

If you purchased the projector with the lens sold separately, remove the lens hole cover before use, and store it for the future use. When transporting the projector, move the projection lens to the home position, remove the Projection Lens, and then attach the lens hole cover.

For the steps to move the lens to the home position, refer to “Moving the lens to the home position” (x page 52).

Lens hole cover

Lens cushion f

When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They may damage the internal components and result in malfunctions.

f

Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

rDo not set up the projector outdoors.

The projector is designed for indoor use only.

rDo not set up the projector in the following locations.

f

Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal components or malfunction.

f

Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may luctuate in rare cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the projector.

f

Places with sharp temperature luctuations such as near lights (studio lamps): Doing so may shorten the life of the lamp, or result in deformation of the outer case due to heat, which may cause malfunctions.

The operating environment temperature of the projector should be between 0 °C (32 °F) and 45 °C (113 °F) when using it at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 40 °C (104 °F) when using it at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level).

f

Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.

rBe sure to ask a specialized technician or your dealer when installing the projector on

a ceiling.

The optional Ceiling Mount Bracket is required.

Model No.: ET-PKE200H (for High Ceilings), ET-PKE200S (for Low Ceilings), ET-PKE200B (Projector Mount Base)

r

Ask a qualiied technician or your dealer to install the cable wiring for DIGITAL LINK connection.

Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate installation.

r

The projector may not work properly due to strong radio wave from the broadcast station or the radio.

If there is any facility or equipment, which outputs strong radio wave, near the installation location, install the projector at a location suficiently far from the source of the radio wave. Or, wrap the LAN cable connected to the <DIGITAL LINK/LAN> terminal by using a piece of metal foil or a metal pipe, of which is grounded at both ends.

rProjection Lens

Be sure to use the standard zoom lens supplied with the projector (PT-EZ770Z, PT-EW730Z, PT-EX800Z only) or the speciied

Projection Lens (optional). The standard zoom lens supplied with PT-EZ570 series, PT-EW630 series, PT-EW530 series,

PT-EX600 series, PT-EX500 series is different from the lens of this projector. Using it may result in malfunction or damage. Do not use it.

18 - ENGLISH

Chapter 1

Preparation — Precautions for use

rFocus adjustment

The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power. Before adjusting the lens focus, wait at least 30 minutes with the image projected.

r

Do not install the projector at elevations of 2 700 m (8 858') or higher above sea level.

Doing so may shorten the life of the components and result in malfunctions.

rDo not use the projector tilted to the right or left.

Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction.

rCautions when setting up the projector

f

When installing and using the projector with a method other than the loor standing installation using the adjustable feet, ix the projector using the four screw holes for ceiling mount (as shown in the igure).

(Screw diameter: M6, tapping depth inside the set: 12 mm (15/32"), torque: 4 ± 0.5 N·m)

Prevent a gap forming between the setting surface and the screw holes for ceiling mount on the projector bottom, for example, by inserting spacers (metallic) between them.

Screw holes for ceiling mount (M6)

Adjustable feet

The positions of screw holes for ceiling mount and adjustable feet

f

Use the adjustable feet only for the loor standing installation and for adjusting the angle. Using them for other purposes may damage the projector.

f

Do not stack projectors on top of each other.

f

Do not use the projector supporting it by the top.

f

Do not use the projector tilted at an angle that exceeds ±15° from the horizontal plane.

f

Do not block the ventilation ports (intake and exhaust) of the projector.

ENGLISH - 19

Chapter 1

Preparation — Precautions for use f

Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector.

+15°

-15°

500 mm (20") or longer 1 000 mm (40") or longer

1 000 mm (40") or longer

100 mm (4") or longer f

Do not install the projector in a conined space.

When installing the projector in a conined space, provide air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

Security

When using this product, take safety measures against the following incidents.

f Personal information being leaked via this product f

Unauthorized operation of this product by a malicious third party f

Interfering or stopping of this product by a malicious third party

Take suficient security measures. (x pages 106, 123) f

Make your password dificult to guess as much as possible.

f

Change your password periodically.

f

Panasonic Corporation or its afiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries.

f

The connecting network must be secured by a irewall, etc.

f

Set a password for the web control and restrict the users who can log in.

DIGITAL LINK

“DIGITAL LINK” is a technology that uses a twisted-pair-cable to transmit video, audio, Ethernet, and serial control signals.

The projector supports the optional Digital Interface Box (Model No.: ET-YFB100G) and the “XTP transmitter” of Extron

Electronics. For the twisted-pair-cable transmitter of other manufacturers of which the operation has been veriied with this projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the veriication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veriied. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers.

Cautions on use

r

To get a good picture quality

f

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

r

Do not touch the surface of the Projection Lens with your bare hands.

If the surface of the Projection Lens becomes dirty from ingerprints or anything else, this will be magniied and projected onto the screen.

Attach the lens cover supplied with the projector or the optional Projection Lens when you do not use the projector.

20 - ENGLISH

Chapter 1

Preparation — Precautions for use

rLCD panel

f

The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual image may remain on the LCD panel. Note that the residual image may not disappear.

rOptical parts

When the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc. is present, the replacement cycle of the LCD panel, delection panel and other optical parts may be shorter even if used for less than one year. Consult your dealer for details.

r

Do not move the projector or subject it to vibration or impact while it is operating.

Doing so may shorten the life of the built-in motor.

rLamp

The light source of the projector is a high-pressure mercury lamp.

A high-pressure mercury lamp has the following characteristics.

f The luminance of the lamp will decrease by duration of usage.

f The lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or degradation due to cumulative runtime.

f

The lamp life varies greatly depending on individual differences and usage conditions. In particular, continuous use for 12 hours or more and frequent off/on switching of the power greatly deteriorate the lamp and affects the lamp life.

f

In rare cases, the lamps burst shortly after projection starts.

f

The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the lamp unit regularly.

(“When to replace the lamp unit” (x page 133), “How to replace the lamp unit” (x page 133)) f

If the lamp bursts, gas contained inside of the lamp is released in the form of smoke.

f

It is recommended that you store the Replacement Lamp Unit as a contingency.

r

Computer and external device connections

f

When connecting a computer or an external device, read this manual carefully regarding the use of power cords and shielded cables as well.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.

The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal.

ENGLISH - 21

Chapter 1

Preparation — Precautions for use

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories.

Wireless/wired remote control unit <1>

(N2QAYA000063)

Lens hole cover <1>

(Only lens optional models)

(Attached to the projector at the time of purchase)

(6103468303)

Power cord

(TXFSX01RXQZ)

(TXFSX01RWDZ)

(TXFSX01RXRZ)

Lens cover <1>

(Only models with lens)

(6103543376)

CD-ROM <1>

(TXFQB02VLM8)

(TXFSX02UTRZ)

AAA/R03 or AAA/LR03 battery <2>

(For remote control unit)

Attention

f

After unpacking the projector, discard the power cord cap and packaging material properly.

f

Do not use the supplied power cord for devices other than this projector.

f

For missing accessories, consult your dealer.

f

Store small parts in an appropriate manner, and keep them away from small children.

Note

f The type and number of the supplied power cords vary depending on the country where you purchased the product.

f The model numbers of accessories are subject to change without prior notice.

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follows.

Instruction/list (PDF) Operating Instructions – Functional Manual

Multi Projector Monitoring & Control Software Operating Instructions

Logo Transfer Software Operating Instructions

List of Compatible Projector

Models

This is a list of projectors that are compatible with the software contained in the CD-ROM and their restrictions.

22 - ENGLISH

Software

Chapter 1

Preparation — Precautions for use

Multi Projector Monitoring &

Control Software (Windows)

Logo Transfer Software

(Windows)

This software allows you to monitor and control multiple projectors connected to the LAN.

This software allows you to transfer original images, such as company logos to be displayed when projection starts, to the projector.

Optional accessories

Optional accessories

(product name)

Projection Lens

Ceiling Mount Bracket

Replacement Lamp Unit

Replacement Filter Unit

Digital Interface Box

Model No.

Zoom lens

Fixed-focus lens

ET-ELW20, ET-ELT20, ET-ELT21

ET-ELW21

ET-PKE200H (for High Ceilings), ET-PKE200S (for Low Ceilings), ET-PKE200B (Projector

Mount Base)

ET-LAE300

ET-RFE300

ET-YFB100G

Note

f The model numbers of optional accessories are subject to change without prior notice.

ENGLISH - 23

Chapter 1

Preparation — Start-up display

Start-up display

When the projector is switched on for the irst time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu

[INITIALIZE] is executed, the focus adjustment screen is displayed after projection starts, then the initial setting screen is displayed. Set them in accordance with circumstances.

In other occasions, you can change the settings by menu operations.

Focus adjustment

Adjust the focus to display the menu screen clearly.

You may also need to adjust the zoom and shift.

Refer to “Adjusting the focus, zoom, and shift” (x page 51) for details.

1) Press asqw to adjust the focus.

LENS

FOCUS

ADJUST

2) Press the <MENU> button to proceed to the initial setting.

Initial setting (display language)

Select the language to show on the screen.

After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.

1) Press as to select the display language.

INITIAL SETTING 1/4

Please select DISPLAY LANGUAGE.

ENTER

SELECT

SET

2) Press the <ENTER> button to proceed to the initial setting.

Initial setting (installation setting)

Set [PROJECTION METHOD] depending on the installation mode. Refer to “Installation mode” (x page 33) for details.

After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [PROJECTION METHOD].

1) Press qw to switch the setting.

INITIAL SETTING 2/4

PROJECTION METHOD FRONT/FLOOR

Change the projection method if the screen display is upside down or inverted.

ENTER

CHANGE

SET

2) Press the <ENTER> button to proceed to the initial setting.

24 - ENGLISH

Chapter 1

Preparation — Start-up display

Initial setting (standby mode)

Set the operation mode during standby. The default setting is [ECO] that keeps power consumption low during standby. When the network function is used during standby, set to [NORMAL]. After completed the initial setting, you can change the setting from the [PROJECTOR

SETUP] menu

→ [ECO MANAGEMENT] → [STANDBY MODE].

1) Press qw to switch the setting.

INITIAL SETTING

STANDBY MODE ECO

If STANDBY MODE is set to ECO, you cannot use network functions when the projector is standing by.

Also, you cannot use some RS-232C protocol commands.

3/4

ENTER

CHANGE

SET

2) Press the <ENTER> button to proceed to the initial setting.

Note

f

The above initial setting screen is the one displayed when the projector is switched on for the irst time after purchase. When [ALL USER

DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed.

Initial setting (screen setting)

Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu

→ [SCREEN SETTING].

1) Press as to select an item.

2) Press qw to switch the setting.

INITIAL SETTING

SCREEN FORMAT

SCREEN POSITION

Set as necessary for the screen in use.

16:10

4/4

ENTER

MENU SELECT

SET

CHANGE

3)

Press the <ENTER> button.

f

Conirm the setting value and complete the initial setting.

Note

f f

If you press the <MENU> button on the initial setting screen, you can go back to the previous screen.

To continue operations after completed the initial settings, refer to “Selecting the input signal” (x page 51).

f

By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR

SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.

ENGLISH - 25

Chapter 1

Preparation — About your projector

About your projector

Remote control

2

3

4

5

Front

1

6

7

12

6

13

Top

8

9

10

11

14

15

16

17

18

19

20

21

22

23

24

Bottom

26

25

1

Power standby <v> button

Sets the projector to the state where the projector is switched off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in the projection mode.

2 Power on <b> button

Starts projection when the <MAIN POWER> switch on the projector is set to <ON> when the power is switched off

(standby mode).

3 Remote control indicator

Flashes if any button in the remote control is pressed.

4

Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons

Adjusts the Projection Lens. (x page 51)

5 <MENU> button/<ENTER> button/asqw button

Used to navigate through the menu screen. (x page 59)

6 <VOL-

> button/<VOL+> button

Adjusts the volume of the built-in speaker or audio output.

(x page 54)

7

<ON SCREEN> button

Switches on (display)/off (hide) the on-screen display function.

(x page 54)

8

Input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>,

<VIDEO>, <DisplayPort>, <HDMI>) buttons

Switches the input signal to project. (x page 53)

9 Number (<0> - <9>) buttons

Used when the system uses multiple projectors.

Used to input ID numbers or passwords.

10 <ID ALL> button

Used to simultaneously control all the projectors with a single remote control when using multiple projectors. (x page 30)

11

<ECO> button

Displays the setting screen relating to ECO management.

(x pages 57, 89)

12 <SHUTTER> button

Used when temporarily turning off the image and audio.

(x page 53)

Attention

f

Do not drop the remote control.

26 - ENGLISH

13

<AUTO SETUP> button

Automatically adjusts the image display position while the image is projected.

[PROGRESS] is displayed on the screen while adjusting automatically. (x page 55)

14

<ID SET> button

Sets the ID number of the remote control to use for a system using multiple projectors. (x page 30)

15 <KEYSTONE> button

Displays the [KEYSTONE] menu. (x pages 55, 72)

16

<FUNCTION> button

Assigns a frequently used operation as a shortcut button.

(x page 57)

17

<FREEZE> button

Used when pausing the image and turning off the audio.

(x page 54)

18

<P-TIMER> button

Operates the presentation timer function. (x page 55)

19 <STATUS> button

Displays the status of the projector. (x pages 57, 96)

20 <DEFAULT> button

Resets the content of the sub-menu to the factory default.

(x page 60)

21 <D.ZOOM> button

Displays the [DIGITAL ZOOM] menu. (x pages 56, 86)

22 <MUTE> button

Used when temporarily turning off the audio. (x page 54)

23 <ASPECT> button

Switches the aspect ratio of the image. (x page 56)

24 <P IN P> button

Switches the [P IN P] setting. (x page 56)

25 Remote control signal transmitter

26 Remote control wired terminal

This is the terminal to connect to the projector by a cable when used as a wired remote control. (x page 31)

Chapter 1

Preparation — About your projector f

Avoid contact with liquids or moisture.

f

Do not attempt to modify or disassemble the remote control.

Note

f When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at a distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±30° vertically and horizontally, but the effective control range may be reduced.

f

If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.

f

The signal will be relected off the screen. However, the operating range may be limited from light relection loss due to the screen material.

f

If the remote control signal receiver directly receives strong light, such as luorescent light, the remote control may not operate properly. Use it in a place distant from the light source.

f

The power indicator <ON (G)/STANDBY (R)> will lash if the projector receives a remote control signal.

Projector body

Front Side

1 2 3 4 5

16 15

6

Rear

7 8 6

9 10 11 12 13 14 15

Projection direction

WARNING

Keep your hands and other objects away from the air exhaust port.

f

Keep your hands and face away.

f

Do not insert your ingers.

f

Keep heat-sensitive objects away.

Heated air from the air exhaust port can cause burns, injury, or deformations.

1 Remote control signal receiver (front)

2 Power indicator <ON (G)/STANDBY (R)>

Displays the status of the power.

3 Lamp indicator <LAMP>

You can display the status of the lamp.

4 Temperature indicator <TEMP>

Displays the status of the internal temperature.

5 Filter indicator <FILTER>

Displays the status of the air ilter unit.

17 9

6

Adjustable feet

Adjusts the projection angle.

7 Speaker

8 Projection Lens

(Only models with lens)

9 Air exhaust port

10 Remote control signal receiver (rear)

11 <MAIN POWER> switch

Turns off/on the main power.

12 <AC IN> terminal

Connect the supplied power cord.

13 Connecting terminals (x

page 29)

14 Security slot

This security slot is compatible with the Kensington security cables.

15 Air intake port

16

Air ilter cover

The air ilter unit is inside.

17 Control panel (x

page 28)

ENGLISH - 27

Bottom

Chapter 1

Preparation — About your projector

Top

19

18 20

Projection direction

18 Burglar hook port

Attaches a burglar prevention cable, etc.

19 Luminance sensor (x page 68)

Attention

f

Do not block the ventilation ports (intake and exhaust) of the projector.

20 Lens release button

21 Lamp cover

The lamp unit is inside.

r Control panel

21

1

2

3

4

1

Power standby <v/b> button

Sets the projector to the state where the projector is switched off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in the projection mode. Also starts projection when the power is switched off (standby mode).

2 <MENU> button

Displays or hides the main menu. (x page 59)

Returns to the previous menu when a sub-menu is displayed.

If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen display is turned on.

3 <VOL-

> button/<VOL+> button

Adjusts the volume of audio output. (x page 54)

5

6

3

7

8

4

<SHUTTER> button

Used when temporarily turning off the image and audio.

(x page 53)

5 <INPUT> button

Switches the input signal to project. (x page 53)

6

<ENTER> button

Determines and executes an item in the menu screen.

7

<LENS> button

Adjusts the focus, zoom, and shift (position) of the lens.

8 asqw

buttons

Used to select items in the menu screen, change settings, and adjust levels.

Also used to enter a password in [SECURITY] or enter characters.

28 - ENGLISH

r Connecting terminals

1

Chapter 1

Preparation — About your projector

2 3 4 5 6 7 8

9 10 11 12 13

1 <DIGITAL LINK/LAN> terminal

This is the LAN terminal to connect to the network. This is also used when connecting a device for transmitting video and audio signals via the LAN terminal.

2 <HDMI IN> terminal

This is the terminal to input HDMI signals.

3 <REMOTE 1 IN> terminal

This is the terminal to connect to the remote control by cable when controlling the projector by wired remote control.

4 <MONITOR OUT> terminal

This is the terminal to output analog RGB signals and YC

YP

B

P

R

B

C

signals that were input to the <RGB 1 IN> or <RGB 2

IN> terminal to an external device. When the input is switched to RGB1 or RGB2, the corresponding signals are output.

R

/

5 <RGB 1 IN> terminal

This is the terminal to input RGB signals or YC

B

C

R

/YP signals.

B

P

R

6

<RGB 2 IN> (<R/P

R

>, <VIDEO/G/Y>, <B/P

B

/C>, <SYNC/HD>,

<VD>) terminal

This is the terminal to input RGB signals or YC

B signals, Y/C signals, and video signals.

C

R

/YP

B

P

R

7 <DVI-D IN> terminal

This is the terminal to input DVI-D signals.

8 <DisplayPort IN> terminal

This is the terminal to input DisplayPort signals.

9 <VIDEO IN> terminal

This is the terminal to input video signals.

10 <AUDIO IN 1> terminal /<AUDIO IN 2> terminal/<AUDIO IN

3> terminal

This is the terminal to input audio. Left input <L> and right input

<R> are provided for the <AUDIO IN 3> terminal.

11 <VARIABLE AUDIO OUT> terminal

This is the terminal to output the input audio signal to the projector.

12 <SERIAL IN> terminal

This is the RS-232C compatible terminal to externally control the projector by connecting a computer.

13

<REMOTE 2 IN> terminal

This is the terminal to remotely control the projector using the external control circuit.

Attention

f

When a LAN cable is directly connected to the projector, the network connection must be made indoors.

ENGLISH - 29

Chapter 1

Preparation — Using the remote control

Using the remote control

Inserting and removing the batteries

(ii)

(i)

Fig. 1 Fig. 2

1) Open the cover. (Fig. 1)

2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order.

Setting the ID number of the remote control

When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector individually using single remote control, if a unique ID number is assigned to each projector.

After setting the ID number of the projector, set same ID number on the remote control.

The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID ALL> button on the remote control. Also, you can control a projector by pressing the <ID ALL> button on the remote control even if you do not know the projector ID.

How to set

1)

Press the <ID SET> button on the remote control.

2) Within five seconds, press the two-digit ID number set on the projector using the number (<0> - <9>) buttons.

f

If you press the <ID ALL> button, you can control the projectors regardless of the ID number setting of the projector.

Attention

f

Since the ID number of the remote control can be set without the projector, do not press the <ID SET> button on the remote control carelessly. If the <ID SET> button is pressed and no number (<0> - <9>) buttons are pressed within ive seconds, the ID number returns to its original value before the <ID SET> button was pressed.

f

The ID number set on the remote control will be stored unless it is set again. However, it will be erased if the remote control is left with dead batteries. Set the same ID number again when the batteries are replaced.

Note

f

Set the ID number of the projector from the [PROJECTOR SETUP] menu

→ [PROJECTOR ID].

30 - ENGLISH

Chapter 1

Preparation — Using the remote control

Connecting to the projector with a cable

When controlling the projector by wired remote control, connect the <REMOTE 1 IN> terminal on the projector to the remote control wired terminal on the remote control by a commercial M3 stereo mini jack cable.

The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.

M3 stereo mini jack cable (commercially available)

Remote control

Connecting to the remote control wired terminal

Connecting terminals

Attention

f

Use a cable that is 15 m (49'3") or shorter, with dual core shielded. The remote control may not operate when the length of the cable exceeds 15 m (49'3") or when the shielding of the cable is inadequate.

ENGLISH - 31

Chapter 2

Getting Started

This chapter describes things you need to do before using the projector such as the setup and connections.

32 - ENGLISH

Chapter 2Getting Started — Setting up

Setting up

Installation mode

There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu

→ [PROJECTION METHOD] (x page 88) depending on the installation method.

Mounting on the ceiling and projecting forward

Setting on a desk/loor and projecting from rear

(Using the translucent screen)

Menu item

[PROJECTION METHOD]

Method

[FRONT/CEILING]

Mounting on the ceiling and projecting from rear

(Using the translucent screen)

Menu item

[PROJECTION METHOD]

Method

[REAR/FLOOR]

Setting on a desk/loor and projecting forward

Menu item

[PROJECTION METHOD]

Method

[REAR/CEILING]

Menu item

[PROJECTION METHOD]

Method

[FRONT/FLOOR]

Parts for ceiling mount (optional)

You can install the projector on the ceiling using the optional Ceiling Mount Bracket (Model No.: ET-PKE200H (for High Ceilings), ET-PKE200S

(for Low Ceilings), and ET-PKE200B (Projector Mount Base)).

f

Be sure to use the Ceiling Mount Bracket speciied for this projector.

f

Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with the bracket.

Attention

f

To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualiied technician.

ENGLISH - 33

Chapter 2Getting Started — Setting up

Projected image size and throw distance

Refer to the projected image size and projection distance shown below to install the projector. The image size and image position can be adjusted in accordance with the screen size and screen position.

Projected image

L1

SD

Screen

L (LW/LT)

SW

L1

Screen

L (LW/LT)

Note

f

This illustration is prepared on the assumption that the projected image size and position have been aligned to it full inside the screen.

(Unit: m)

L (LW/LT)

*1

L1

SH

SW

H

SD

Projection distance

Lens protrusion dimension

Image height

Image width

Distance from the lens center to the lower edge of the projected image

Projected image size

*1

LW: Minimum projection distance when the Zoom Lens is used

LT: Maximum projection distance when the Zoom Lens is used

(Unit: m)

Projection Lens Model No.

Standard zoom lens

ET-ELW21

ET-ELW20

ET-ELT20

ET-ELT21

L1 dimension (approximate value)

0.059

0.050

0.080

0.081

0.080

Attention

f

Before setting up, read “Precautions for use” (x page 18).

34 - ENGLISH

Chapter 2Getting Started — Setting up

Projection distance by Projection Lens

A ±5 % error in listed projection distances may occur.

In addition, when [KEYSTONE] is used, distance is corrected to become smaller than the speciied screen size.

For PT-EZ770Z

r

When the screen aspect ratio is 16:10

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio *1

Standard zoom lens

1.7-2.8:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.538

0.862

1.36

2.35

0.673

1.077

1.71

2.95

0.808

1.292

2.06

3.55

0.942

1.506

2.42

4.15

1.077

1.723

2.77

4.76

1.212

1.939

3.12

5.36

1.346

2.154

3.48

5.96

1.615

2.585

4.18

7.16

2.019

3.231

5.24

8.96

2.692

4.308

7.01

11.96

3.365

5.385

8.77

14.96

4.039

6.462

10.54 17.97

4.712

7.539 12.30 20.97

5.385

8.616 14.07 23.97

Fixedfocus

Optional lens

Short focus zoom lens lens

ET-ELW21 ET-ELW20

0.8:1

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Fixed

Projection distance (L)

Min.

Max.

Min.

Max.

0.63

0.80

0.97

1.14

1.32

1.49

1.66

2.00

2.52

3.38

4.24

5.10

5.95

6.81

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.02

1.41

2.29

3.81

3.72

6.03

1.29

1.77

2.89

4.79

4.70

7.59

1.55

2.14

3.49

5.77

5.68

9.15

1.82

2.50

4.09

6.75

6.66

10.71

2.09

2.87

4.69

7.73

7.64

12.27

2.36

3.23

5.30

8.71

8.63

13.83

2.63

3.60

5.90

9.69

9.61

15.39

3.16

4.32

7.10

11.65 11.57 18.51

3.96

5.42

8.90

14.59 14.52 23.19

5.31

7.25

11.91 19.49 19.43 30.99

6.65

9.07

14.91 24.39 24.34 38.79

7.99

10.9

17.92 29.29 29.25 46.59

9.33

12.73

20.92 34.19 34.16 54.39

10.67

14.55 23.93 39.09 39.07 62.19

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

-

0.05 - 0.59

-0.07 - 0.74

-

0.08 - 0.89

-

0.09 - 1.04

-

0.11 - 1.18

-0.12 - 1.33

-

0.13 - 1.48

-

0.16 - 1.78

-0.20 - 2.22

-

0.27 - 2.96

-0.34 - 3.70

-0.40 - 4.44

-

0.47 - 5.18

-

0.54 - 5.92

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.27

0.34

0.40

0.47

0.54

0.61

0.67

0.81

1.01

1.35

1.68

2.02

2.36

2.69

r

When the screen aspect ratio is 16:9

(Unit: m)

Lens type

Standard zoom lens

Projection Lens Model No.

Throw ratio

*1

1.7-2.8:1

Projected image size

Diagonal (SD)

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.498

0.886

1.40

2.42

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

0.623

1.107

1.76

3.04

0.747

1.328

2.12

3.65

0.872

1.550

2.49

4.27

0.996

1.771

2.85

4.89

1.121

1.992

3.21

5.51

1.245

2.214

3.57

6.12

1.494

2.657

4.30

7.36

1.868

3.321

5.39

9.21

2.491

3.113

3.736

4.358

4.981

4.428

5.535

6.641

7.20

9.02

12.29

15.38

10.83 18.47

7.748 12.65 21.55

8.855 14.46 24.64

Fixed

0.65

0.83

1.00

1.18

1.35

1.53

1.71

2.06

2.59

3.47

4.36

5.24

6.12

7.00

Optional lens

Fixed-

Short focus focus

0.8:1 zoom lens lens

ET-ELW21 ET-ELW20

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Projection distance (L)

Min.

Max.

Min.

Max.

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.05

1.45

2.36

3.92

3.83

6.20

1.32

1.82

2.97

4.92

4.83

7.81

1.60

2.20

3.59

5.93

5.84

9.41

1.87

2.57

4.21

6.94

6.85

11.01

2.15

2.95

4.83

7.95

7.86

12.62

2.43

3.32

5.45

8.95

8.87

14.22

2.70

3.70

6.06

9.96

9.88

15.82

3.25

4.45

7.30

11.97 11.90 19.03

4.08

5.58

9.15

15.00 14.93 23.84

5.46

7.45

12.24

20.03

19.98 31.86

6.83

9.33

15.33 25.07 25.02 39.87

8.21

11.20

18.42 30.10 30.07 47.89

9.59

13.08 21.51 35.14 35.12 55.91

10.97 14.96 24.60 40.18 40.17 63.92

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

-

0.05 - 0.55

-

0.06 - 0.68

-

0.07 - 0.82

-

0.09 - 0.96

-0.10 - 1.10

-0.11 - 1.23

-0.12 - 1.37

-

0.15 - 1.64

-

0.19 - 2.05

-

0.25 - 2.74

-0.31 - 3.42

-0.37 - 4.11

-

0.44 - 4.79

-

0.50 - 5.48

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.25

0.31

0.37

0.44

0.50

0.56

0.62

0.75

0.93

1.25

1.56

1.87

2.18

2.49

ENGLISH - 35

Chapter 2Getting Started — Setting up

r When the screen aspect ratio is 4:3

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio *1

Standard zoom lens

1.9-3.3:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.610

0.813

1.54

2.67

0.762

1.016

1.94

3.35

0.914

1.219

2.34

4.03

1.067

1.422

2.74

4.71

1.219

1.626

3.14

5.39

1.372

1.829

3.54

6.07

1.524

2.032

3.94

6.75

1.829

2.438

4.74

8.11

2.286

3.048

5.94

10.15

3.048

4.064

7.94

13.55

3.810

5.080

9.94

16.95

4.572

6.096

11.94 20.34

5.334

7.112

13.93 23.74

6.096

8.128 15.93 27.14

1.30

1.50

1.69

1.89

2.28

2.86

3.83

4.81

5.78

6.75

7.72

Optional lens

Fixed-

Short focus focus zoom lens lens

ET-ELW21 ET-ELW20

0.9:1 1.5-2.0:1

Long focus zoom lens

ET-ELT20

3.3-5.4:1

Fixed

Projection distance (L)

Min.

Max.

Min.

Max.

0.72

0.91

1.11

Ultra long focus zoom lens

ET-ELT21

5.4-8.6:1

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.16

1.60

2.61

4.33

4.24

6.85

1.46

2.01

3.29

5.43

5.35

8.62

1.77

2.43

3.97

6.54

6.46

10.39

2.07

2.84

4.65

7.65

7.57

12.15

2.37

3.25

5.33

8.76

8.68

13.92

2.68

3.67

6.01

9.87

9.79

15.68

2.98

4.08

6.69

10.98 10.91 17.45

3.59

4.91

8.05

13.20

13.13

20.98

4.50

6.15

10.09 16.53 16.47 26.28

6.02

8.21

13.49 22.08 22.03 35.11

7.53

10.28 16.90 27.62 27.58 43.94

9.05

12.35 20.30 33.17 33.14 52.77

10.57 14.41 23.70 38.72 38.70 61.60

12.09 16.48 27.10 44.27 44.26 70.43

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

-0.06 - 0.67

-

0.08 - 0.84

-

0.09 - 1.01

-0.11 - 1.17

-0.12 - 1.34

-

0.14 - 1.51

-

0.15 - 1.68

-

0.18 - 2.01

-

0.23 - 2.51

-

0.30 - 3.35

-

0.38 - 4.19

-

0.46 - 5.03

-

0.53 - 5.87

-0.61 - 6.71

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.30

0.38

0.46

0.53

0.61

0.69

0.76

0.91

1.14

1.52

1.91

2.29

2.67

3.05

For PT-EW730Z

r

When the screen aspect ratio is 16:10

(Unit: m)

Lens type

Standard zoom lens

Projection Lens Model No.

Throw ratio

*1

1.7-2.8:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.538

0.862

1.38

2.38

0.673

1.077

1.74

2.99

0.808

1.292

2.09

3.60

0.942

1.506

2.45

4.21

1.077

1.723

2.81

4.82

1.212

1.939

3.16

5.42

1.346

2.154

3.52

6.03

1.615

2.585

4.24

7.25

2.019

3.231

5.31

9.07

2.692

4.308

7.09

12.11

3.365

5.385

8.88

15.16

4.039

6.462

10.67

18.20

4.712

7.539 12.45 21.24

5.385

8.616 14.24 24.28

Fixed

0.64

0.81

0.99

1.16

1.33

1.51

1.68

2.03

2.55

3.42

4.29

5.16

6.03

6.89

Optional lens

Fixed-

Short focus focus

0.8:1 zoom lens lens

ET-ELW21 ET-ELW20

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Projection distance (L)

Min.

Max.

Min.

Max.

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.03

1.42

2.32

3.85

3.76

6.10

1.30

1.79

2.93

4.85

4.76

7.68

1.57

2.16

3.54

5.84

5.75

9.26

1.85

2.53

4.15

6.83

6.75

10.84

2.12

2.90

4.75

7.82

7.74

12.42

2.39

3.27

5.36

8.81

8.73

14.00

2.66

3.64

5.97

9.80

9.73

15.58

3.21

4.38

7.19

11.79 11.72 18.73

4.02

5.48

9.01

14.76

14.70

23.47

5.38

7.33

12.05 19.72 19.67 31.36

6.74

9.17

15.10 24.68 24.64 39.26

8.10

11.02

18.14 29.64 29.61 47.15

9.46

12.86 21.18 34.59 34.58 55.04

10.82 14.71 24.22 39.55 39.55 62.94

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

-

0.05 - 0.59

-0.07 - 0.74

-

0.08 - 0.89

-

0.09 - 1.04

-

0.11 - 1.18

-0.12 - 1.33

-

0.13 - 1.48

-

0.16 - 1.78

-0.20 - 2.22

-

0.27 - 2.96

-0.34 - 3.70

-0.40 - 4.44

-

0.47 - 5.18

-

0.54 - 5.92

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.27

0.34

0.40

0.47

0.54

0.61

0.67

0.81

1.01

1.35

1.68

2.02

2.36

2.69

36 - ENGLISH

Chapter 2Getting Started — Setting up

r

When the screen aspect ratio is 16:9

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio *1

Standard zoom lens

1.7-2.8:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.498

0.886

1.42

2.45

0.623

1.107

1.79

3.08

0.747

1.328

2.15

3.70

0.872

1.550

2.52

4.33

0.996

1.771

2.89

4.95

1.121

1.992

3.25

5.58

1.245

2.214

3.62

6.20

1.494

2.657

4.35

7.45

1.868

3.321

5.46

9.33

2.491

4.428

7.29

12.45

3.113

5.535

9.13

15.58

3.736

6.641

10.96 18.70

4.358

7.748 12.80 21.83

4.981

8.855 14.63 24.95

Optional lens

Fixed-

Short focus focus

0.8:1 zoom lens lens

ET-ELW21 ET-ELW20

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Fixed

Projection distance (L)

Min.

Max.

Min.

Max.

0.66

0.84

1.01

1.19

1.37

1.55

1.73

2.09

2.62

3.52

4.41

5.30

6.19

7.09

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.06

1.46

2.39

3.96

3.87

6.28

1.34

1.84

3.01

4.98

4.90

7.90

1.62

2.22

3.64

6.00

5.92

9.52

1.90

2.60

4.26

7.02

6.94

11.15

2.18

2.98

4.89

8.04

7.96

12.77

2.46

3.36

5.51

9.06

8.98

14.39

2.74

3.74

6.14

10.08 10.00 16.01

3.30

4.50

7.39

12.12

12.05 19.26

4.14

5.64

9.27

15.18 15.11 24.13

5.53

7.53

12.39 20.27 20.22 32.24

6.93

9.43

15.52 25.37 25.33 40.35

8.33

11.33

18.64 30.46 30.44 48.47

9.72

13.22

21.77

35.56 35.55 56.58

11.12

15.12 24.90 40.66 40.66 64.69

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

-

0.05 - 0.55

-

0.06 - 0.68

-

0.07 - 0.82

-

0.09 - 0.96

-0.10 - 1.10

-0.11 - 1.23

-0.12 - 1.37

-

0.15 - 1.64

-

0.19 - 2.05

-

0.25 - 2.74

-0.31 - 3.42

-0.37 - 4.11

-

0.44 - 4.79

-

0.50 - 5.48

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.25

0.31

0.37

0.44

0.50

0.56

0.62

0.75

0.93

1.25

1.56

1.87

2.18

2.49

r When the screen aspect ratio is 4:3

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio

*1

Standard zoom lens

2.0-3.4:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height

(SH)

Width

(SW)

Min.

(LW)

Max.

(LT)

0.610

0.813

1.57

2.70

0.762

1.016

1.97

3.39

0.914

1.219

2.38

4.08

1.067

1.422

2.78

4.77

1.219

1.626

3.18

5.46

1.372

1.829

3.59

6.15

1.524

2.032

3.99

6.84

1.829

2.438

4.80

8.21

2.286

3.048

6.01

10.28

3.048

4.064

8.04

13.72

3.810

5.080 10.06 17.16

4.572

6.096 12.08 20.61

5.334

7.112

14.10

24.05

6.096

8.128 16.12 27.49

1.32

1.52

1.71

1.91

2.30

2.89

3.88

4.86

5.85

6.83

7.81

Optional lens

Fixed-

Short focus focus zoom lens lens

ET-ELW21 ET-ELW20

0.9:1 1.5-2.0:1

Long focus zoom lens

ET-ELT20

3.3-5.5:1

Fixed

0.73

0.93

1.12

Ultra long focus zoom lens

ET-ELT21

5.4-8.7:1

Projection distance (L)

Min.

(LW)

Max.

(LT)

Min.

(LW)

Max.

(LT)

Min.

(LW)

Max.

(LT)

1.18

1.62

2.64

4.38

4.29

6.94

1.48

2.04

3.33

5.50

5.41

8.73

1.79

2.45

4.02

6.62

6.54

10.51

2.10

2.87

4.71

7.75

7.67

12.30

2.41

3.29

5.40

8.87

8.79

14.09

2.71

3.71

6.08

9.99

9.92

15.87

3.02

3.64

4.56

6.10

7.64

9.18

10.72

4.12

4.96

6.21

8.30

6.77

8.15

10.22

13.66

11.11

13.36

16.73

22.34

11.04

22.30

17.66

13.29 21.24

16.67

26.60

35.53

10.39 17.10 27.95 27.92 44.47

12.48 20.55 33.57 33.55 53.40

14.57 23.99 39.18 39.18 62.34

12.25 16.66 27.43 44.79 44.80 71.28

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

0.06 - 0.67

0.08 - 0.84

0.09 - 1.01

0.11 - 1.17

0.12 - 1.34

0.14 - 1.51

0.15 - 1.68

0.18 - 2.01

0.23 - 2.51

0.30 - 3.35

0.38 - 4.19

0.46 - 5.03

0.53 - 5.87

0.61 - 6.71

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.30

0.38

0.46

0.53

0.61

0.69

0.76

0.91

1.14

1.52

1.91

2.29

2.67

3.05

ENGLISH - 37

Chapter 2Getting Started — Setting up

For PT-EX800Z

r When the screen aspect ratio is 4:3

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio *1

Standard zoom lens

1.7-2.8:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.610

0.813

1.30

2.26

0.762

1.016

1.64

2.83

0.914

1.219

1.98

3.41

1.067

1.422

2.32

3.98

1.219

1.626

2.66

4.56

1.372

1.829

3.00

5.14

1.524

2.032

3.33

5.71

1.829

2.438

4.01

6.86

2.286

3.048

5.03

8.59

3.048

4.064

6.72

11.47

3.810

5.080

8.42

14.35

4.572

6.096

10.11

17.23

5.334

7.112

11.81 20.11

6.096

8.128 13.50 22.99

Fixedfocus

Optional lens

Short focus zoom lens lens

ET-ELW21 ET-ELW20

0.8:1

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Fixed

Projection distance (L)

Min.

Max.

Min.

Max.

0.60

0.77

0.93

1.10

1.26

1.43

1.59

1.92

2.42

3.24

4.07

4.89

5.72

6.54

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

0.97

1.35

2.19

3.65

3.56

5.78

1.23

1.70

2.77

4.59

4.50

7.27

1.49

2.05

3.34

5.53

5.44

8.77

1.74

2.40

3.92

6.47

6.38

10.27

2.00

2.75

4.50

7.41

7.32

11.77

2.26

3.10

5.07

8.35

8.27

13.26

2.51

3.45

5.65

9.29

9.21

14.76

3.03

4.15

6.80

11.17

11.09 17.75

3.80

5.20

8.53

14.00

13.92 22.24

5.08

6.95

11.41

18.70 18.63 29.73

6.37

8.70

14.30

23.40

23.34

37.21

7.65

10.45 17.18 28.11 28.05 44.70

8.94

12.20

20.06

32.81 32.76 52.18

10.22

13.95 22.94 37.51 37.47 59.67

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

ET-ELT21

0.00 - 0.61

0.00 - 0.76

0.00 - 0.91

0.00 - 1.07

0.00 - 1.22

0.00 - 1.37

0.00 - 1.52

0.00 - 1.83

0.00 - 2.29

0.00 - 3.05

0.00 - 3.81

0.00 - 4.57

0.00 - 5.33

0.00 - 6.10

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.30

0.38

0.46

0.53

0.61

0.69

0.76

0.91

1.14

1.52

1.91

2.29

2.67

3.05

r

When the screen aspect ratio is 16:9

(Unit: m)

Lens type

Projection Lens Model No.

Throw ratio

*1

Standard zoom lens

1.7-2.8:1

Projected image size

Diagonal (SD)

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

6.35 (250")

7.62 (300")

8.89 (350")

10.16 (400")

Height Width Min.

Max.

(SH) (SW) (LW) (LT)

0.498

0.886

1.42

2.46

0.623

1.107

1.79

3.09

0.747

1.328

2.16

3.72

0.872

1.550

2.53

4.34

0.996

1.771

2.90

4.97

1.121

1.992

3.27

5.60

1.245

2.214

3.64

6.23

1.494

2.657

4.38

7.48

1.868

3.321

5.48

9.37

2.491

4.428

7.33

12.5

3.113

5.535

9.18

15.64

3.736

6.641

11.02

18.78

4.358

7.748 12.87 21.92

4.981

8.855 14.72 25.05

Optional lens

Fixedfocus

0.8:1

Fixed

Short focus zoom lens lens

ET-ELW21 ET-ELW20

1.3-1.7:1

Long focus zoom lens

ET-ELT20

2.8-4.6:1

Projection distance (L)

Min.

Max.

Min.

Max.

0.66

0.84

1.02

1.20

1.38

1.56

1.74

2.10

2.64

3.54

4.44

5.33

6.23

7.13

Ultra long focus zoom lens

ET-ELT21

4.6-7.2:1

Min.

Max.

(LW) (LT) (LW) (LT) (LW) (LT)

1.06

1.47

2.40

3.99

3.89

6.31

1.40

1.85

3.03

5.01

4.92

7.94

1.68

2.23

3.65

6.04

5.95

9.57

1.96

2.62

4.28

7.06

6.97

11.21

2.24

3.00

4.91

8.09

8.00

12.84

2.52

3.38

5.54

9.11

9.02

14.47

2.80

3.76

6.17

10.13

10.05 16.10

3.36

4.52

7.42

12.18

12.1

19.36

4.20

5.67

9.31

15.26 15.18 24.25

5.60

7.57

12.45 20.38 20.32 32.41

7.00

9.48

15.59 25.51 25.45 40.56

8.40

11.39 18.73 30.63 30.58 48.72

9.80

13.29 21.87 35.75 35.71 56.87

11.20

15.20 25.01 40.88 40.84 65.03

Height position (H)

Standard zoom lens/ET-ELW20/

ET-ELT20/

-

ET-ELT21

0.08 - 0.58

-0.10 - 0.73

-

0.12 - 0.87

-

0.15 - 1.02

-0.17 - 1.16

-

0.19 - 1.31

-

0.21 - 1.45

-

0.25 - 1.74

-

0.31 - 2.18

-

0.41 - 2.91

-

0.52 - 3.63

-0.62 - 4.36

-

0.73 - 5.08

-

0.83 - 5.81

*1

The throw ratio is based on the value during projection with the projected image size of 2.03 m (80").

*2

When the ixed-focus lens (Model No.: ET-ELW21) is attached, the lens shift is not possible. The height position (H) becomes SH/2.

*2

ET-ELW21

(Fixed)

0.25

0.31

0.37

0.44

0.50

0.56

0.62

0.75

0.93

1.25

1.56

1.87

2.18

2.49

38 - ENGLISH

Chapter 2Getting Started — Setting up

Formula to calculate projection distance per Projection Lens

To use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate projection distance.

The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)

For PT-EZ770Z

Lens type

Projection Lens

Model No.

Standard zoom lens

Fixed-focus lens

Short focus zoom lens

Long focus zoom lens

Ultra long focus zoom lens

ET-ELW21

ET-ELW20

ET-ELT20

ET-ELT21

Aspect ratio

16:10

16:9

4:3

16:10

16:9

4:3

16:10

16:9

4:3

16:10

16:9

4:3

16:10

16:9

4:3

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Projection distance (L) formula

L = 1.3900 x SD - 0.0549

L = 2.3640 x SD - 0.0482

L = 1.4286 x SD - 0.0549

L = 2.4297 x SD - 0.0482

L = 1.5736 x SD - 0.0549

L = 2.6763 x SD - 0.0482

L = 0.6763 x SD - 0.0577

L = 0.6951 x SD - 0.0577

L = 0.7656 x SD - 0.0577

L = 1.0557 x SD - 0.0555

L = 1.4374 x SD - 0.0534

L = 1.0851 x SD - 0.0555

L = 1.4774 x SD - 0.0534

L = 1.1952 x SD - 0.0555

L = 1.6273 x SD - 0.0534

L = 2.3662 x SD - 0.1140

L = 3.8583 x SD - 0.1129

L = 2.4320 x SD - 0.1140

L = 3.9656 x SD - 0.1129

L = 2.6788 x SD - 0.1140

L = 4.3680 x SD - 0.1129

L = 3.8667 x SD - 0.2123

L = 6.1416 x SD - 0.2108

L = 3.9742 x SD - 0.2123

L = 6.3123 x SD - 0.2108

L = 4.3775 x SD - 0.2123

L = 6.9529 x SD - 0.2108

For PT-EW730Z

Lens type

Projection Lens

Model No.

Standard zoom lens

Fixed-focus lens

Short focus zoom lens

ET-ELW21

ET-ELW20

Aspect ratio

16:10

16:9

4:3

16:10

16:9

4:3

16:10

16:9

4:3

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Projection distance (L) formula

L = 1.4062 x SD - 0.0504

L = 2.3944 x SD - 0.0497

L = 1.4452 x SD - 0.0504

L = 2.4609 x SD - 0.0497

L = 1.5919 x SD - 0.0504

L = 2.7106 x SD - 0.0497

L = 0.6842 x SD - 0.0572

L = 0.7032 x SD - 0.0572

L = 0.7746 x SD - 0.0572

L = 1.0702 x SD - 0.0554

L = 1.4530 x SD - 0.0534

L = 1.1000 x SD - 0.0554

L = 1.4934 x SD - 0.0534

L = 1.2116 x SD - 0.0554

L = 1.6449 x SD - 0.0534

ENGLISH - 39

Lens type

Long focus zoom lens

Ultra long focus zoom lens

Chapter 2Getting Started — Setting up

Projection Lens

Model No.

Aspect ratio

ET-ELT20

ET-ELT21

16:10

16:9

4:3

16:10

16:9

4:3

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Projection distance (L) formula

L = 2.3952 x SD - 0.1139

L = 3.9041 x SD - 0.1128

L = 2.4617 x SD - 0.1139

L = 4.0126 x SD - 0.1128

L = 2.7115 x SD - 0.1139

L = 4.4197 x SD - 0.1128

L = 3.9138 x SD - 0.2127

L = 6.2152 x SD - 0.2107

L = 4.0226 x SD - 0.2127

L = 6.3880 x SD - 0.2107

L = 4.4307 x SD - 0.2127

L = 7.0361 x SD - 0.2107

For PT-EX800Z

Lens type

Standard zoom lens

Fixed-focus lens

Short focus zoom lens

Long focus zoom lens

Ultra long focus zoom lens

Projection Lens

Model No.

ET-ELW21

ET-ELW20

ET-ELT20

ET-ELT21

Aspect ratio

4:3

16:9

4:3

16:9

4:3

16:9

4:3

16:9

4:3

16:9

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Min. (LW)

Max. (LT)

Projection distance (L) formula

L = 1.3346 x SD - 0.0553

L = 2.2677 x SD - 0.0480

L = 1.4541 x SD - 0.0553

L = 2.4707 x SD - 0.0480

L = 0.6496 x SD - 0.0585

L = 0.7078 x SD - 0.0585

L = 1.0118 x SD - 0.0558

L = 1.3780 x SD - 0.0540

L = 1.1024 x SD - 0.0558

L = 1.5013 x SD - 0.0540

L = 2.2693 x SD - 0.1142

L = 3.7031 x SD - 0.1129

L = 2.4724 x SD - 0.1142

L = 4.0346 x SD - 0.1129

L = 3.7091 x SD - 0.2132

L = 5.8937 x SD - 0.2109

L = 4.0339 x SD - 0.2132

L = 6.4212 x SD - 0.2109

Adjusting adjustable feet

Install the projector on a lat surface so that the front of the projector is parallel to the screen surface and the projected image is rectangular.

If the screen is tilted downward, the projected image can be adjusted to be rectangular by adjusting the front adjustable feet. The adjustable feet can also be used to adjust the projector to be level when it is tilted in the horizontal direction.

Extend the adjustable feet by rotating in the direction shown in the igure and retract by rotating in the opposite direction.

Adjustable amount

Front adjustable feet: Approx. 25 mm (31/32")

Attention

f

Heated air is expelled from the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when adjusting the adjustable feet. (x page 27)

40 - ENGLISH

Chapter 2Getting Started — Removing/attaching the Projection Lens

Removing/attaching the Projection Lens

Removing and attaching procedures of the Projection Lens are same for both standard zoom lens and optional lens.

Move the lens to the home position before replacing or removing the Projection Lens. (x page 52)

Attention

f Replace the Projection Lens after turning off the power of the projector.

f

Do not touch the electrical contact of the Projection Lens. Dust or dirt may cause defective contact.

f

Do not touch the surface of the Projection Lens with your bare hands.

f

Before attaching the Projection Lens, remove the lens hole cover (only lens options models) and lens cover attached to the Projection Lens.

Removing the Projection Lens

Remove the Projection Lens with the following procedure.

(i)

Lens release button

(iii)

(ii)

Projection Lens

1)

With the lens release button held down, turn the Projection Lens counterclockwise to the end and remove the Projection Lens.

Attention

f

Store the removed Projection Lens where it will be free from vibration and impact.

Attaching the Projection Lens

Attach the Projection Lens with the following procedure.

Projection Lens

Fig. 1 Fig. 2

1)

Align the red mark on the Projection Lens with the red mark on the projector, and insert the Projection

Lens as far as possible. (Fig. 1)

2) Turn clockwise to the end. (Fig. 2)

Attention

f

Turn the Projection Lens counterclockwise to conirm that it does not come out.

ENGLISH - 41

Chapter 2Getting Started — Connecting

Connecting

Before connecting

f

Before connecting, carefully read the operating instructions for the external device to be connected.

f Turn off the power of all devices before connecting cables.

f

Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.

g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work.

g

Do not use unnecessarily long cables to connect to a device connected to the projector or to the projector body. The longer the cable, the more it is susceptible to noise. Since using a cable while it is wound makes it act like an antenna, it is more susceptible to noise.

g

When connecting cables, connect GND irst, then insert the connecting terminal of the connecting device in a straight manner.

f

Acquire any connection cable necessary to connect the external device to the system that is neither supplied with the device nor available as an option.

f

If video signals from video equipment contain too much jitter, the images on the screen may wobble. In this case, a time base corrector

(TBC) must be connected.

f

The projector accepts video signals, Y/C signals, YC

B

C

R

/YP

B

P

R

signals, analog RGB signals (synchronization signals are TTL level), and digital signals.

f

Some computer models or graphics cards are not compatible with the projector.

f

Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image may not display properly.

f

Refer to “List of compatible signals” (x page 148) for the types of video signals that can be used with the projector.

<RGB 1 IN> terminal pin assignments and signal names

(6)

Outside view

(11)

(1)

(15)

(5)

(10)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Signal name

R/P

R

G/Y

B/P

B

GND

GND

GND

GND

<MONITOR OUT> terminal pin assignments and signal names

Pin No.

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(6)

Outside view

(11)

(1)

(15)

(5)

(10)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Signal name

R/P

R

G/Y

B/P

B

GND

GND

GND

GND

<HDMI IN> terminal pin assignments and signal names

Pin No.

(9)

(10)

(11)

(12)

(13)

(14)

(15)

Signal name

GND

GND

DDC data

SYNC/HD

VD

DDC clock

Signal name

GND

GND

SYNC/HD

VD

Outside view

Even-numbered pins of

(2) to (18)

(2) (18)

(1) (19)

Odd-numbered pins of (1) to

(19)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

Signal name

T.M.D.S data 2+

T.M.D.S data 2 shield

T.M.D.S data 2-

T.M.D.S data 1+

T.M.D.S data 1 shield

T.M.D.S data 1-

T.M.D.S data 0+

T.M.D.S data 0 shield

T.M.D.S data 0-

T.M.D.S clock+

Pin No.

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

Signal name

T.M.D.S clock shield

T.M.D.S clock-

CEC

SCL

SDA

DDC/CEC

GND

+5 V

Hot plug detection

42 - ENGLISH

Chapter 2Getting Started — Connecting

<DisplayPort IN> terminal pin assignments and signal names

Outside view

Even-numbered pins of

(2)

(1)

(2) to (20)

(20)

(19)

Odd-numbered pins of (1) to

(19)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

*1

Supplies power of +3.3 V/0.5 A Max. Use at the rated power or less.

Signal name

MainLane-3

GND

MainLane+3

MainLane-2

GND

MainLane+2

MainLane-1

GND

MainLane+1

MainLane-0

<DVI-D IN> terminal pin assignments and signal names

Pin No.

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

(16)

Outside view

(24)

(8)

(17)

(1)

(9)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

Connecting example: AV equipment

Signal name

T.M.D.S data 2-

T.M.D.S data 2+

T.M.D.S data 2/4 shield

DDC clock

DDC data

T.M.D.S data 1-

T.M.D.S clock1+

T.M.D.S data 1/3 shield

Pin No.

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

Blu-ray disc player

Signal name

GND

MainLane+0

GND

GND

Aux+

GND

Aux-

Hot plug detection

GND

DP_PWR

*1

Signal name

+5 V

GND

Hot plug detection

T.M.D.S data 0-

T.M.D.S data 0+

T.M.D.S data 0/5 shield

T.M.D.S clock shield

T.M.D.S clock+

T.M.D.S clock-

Audio device

VCR (with built-in TBC)

DVD player with HDMI terminal (HDCP)

Attention

f

Always use one of the following when connecting a VCR.

g

A VCR with built-in time base corrector (TBC) g

A time base corrector (TBC) between the projector and the VCR f

If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the projector and the external devices.

ENGLISH - 43

Chapter 2Getting Started — Connecting

Note

f

When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu

[DVI-D IN]

→ [EDID].

f

The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be displayed properly on some devices.

f

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may be interrupted or may not be displayed.

f

The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion cable, but some devices may not project the image properly or function properly.

f

The projector does not support VIERA Link (HDMI).

Connecting example: Computers

Computer

Control computer

Control computer

Computer

Computer

Computer

Attention

f

When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables.

Note

f

When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu →

[DVI-D IN] → [EDID].

f

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may be interrupted or may not be displayed.

f

The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion cable, but some devices may not project the image properly or function properly.

f

The <DVI-D IN> terminal supports single links only.

f

For the DisplayPort cable, use a DisplayPort cable that conforms to DisplayPort standards. If a cable that does not conform to DisplayPort standards is used, the image may be interrupted or may not be displayed.

f

When entering the SYNC ON GREEN signal, do not enter sync signals to the <SYNC/HD> terminal or the <VD> terminal.

f

If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate the projector.

44 - ENGLISH

Chapter 2Getting Started — Connecting

Connecting example: Twisted-pair-cable transmitter

Twisted-pair-cable transmitters such as the optional Digital Interface Box (Model No.: ET-YFB100G) use twisted-pair-cables to transmit input images, audio, Ethernet, and serial control signals, and the projector can input those digital signals to the <DIGITAL LINK/LAN> terminal.

Computer

Computer cable

(commercially available)

Example of twisted-pair-cable transmitter

Projector connecting terminals

HDMI cable

(commercially available)

Hub

VCR

(with built-in TBC)

Blu-ray disc player

Control computer

Attention

f

Always use one of the following when connecting a VCR.

g

A VCR with built-in time base corrector (TBC) g

A time base corrector (TBC) between the projector and the VCR f

If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the projector and the external devices.

f

Ask a qualiied technician or your dealer to install the cable wiring for a twisted-pair-cable transmitter and the projector. Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate installation.

f

For the LAN cable between a twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria: g

Compatible with CAT5e or higher g

Shielded type (including connectors) g

Straight-through g

Single wire f

When laying cables between a twisted-pair-cable transmitter and the projector, check that cable characteristics are compatible with CAT5e or higher using tools such as a cable tester or cable analyzer.

When using a relay connector midway, include it in the measurement.

f

Do not use a hub between a twisted-pair-cable transmitter and the projector.

f

When connecting to the projector using a twisted-pair-cable transmitter (receiver) of other manufacturer, do not place another twisted-paircable transmitter between the twisted-pair-cable transmitter of other manufacturer and the projector. This may cause image and sound to be disrupted.

f

Do not pull cables forcefully. Also, do not bend or fold cables unnecessarily.

f To reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projector without any loops.

f Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.

f When installing multiple cables, run them side by side along the shortest distance possible without bundling them together.

f

After laying the cables, conirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed in green (indicates normal quality). (x page 110)

Note

f

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may be interrupted or may not be displayed.

f

The projector does not support VIERA Link (HDMI).

f

The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance is exceeded, image and sound may be disrupted and may cause a malfunction in LAN communication. Please note that we do not support the use of the projector outside the maximum transmission distance.

f

For twisted-pair-cable transmitter of other manufacturers of which the operation has been veriied with the DIGITAL LINK compatible projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the veriication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veriied. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers.

ENGLISH - 45

Chapter 3

Basic Operations

This chapter describes basic operations to start with.

46 - ENGLISH

Chapter 3

Basic Operations — Switching on/off the projector

Switching on/off the projector

Connecting the power cord

Make sure that the supplied power cord is securely ixed to the projector body to prevent it from being removed easily.

Conirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.

For details of power cord handling, refer to “Read this irst!” (x page 2).

Attaching the power cord

1)

Check the shapes of the <AC IN> terminal on the rear of the projector body and the power cord connector, and insert the plug completely in the correct direction (until you hear the side tabs click in place).

Removing the power cord

1)

Confirm that the <MAIN POWER> switch on the rear of the projector body is on the <OFF> side, and remove the power plug from the outlet.

2) Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the side tabs.

Power indicator

Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.

Power indicator <ON (G)/STANDBY (R)>

Indicator status

Off

Red

Green

Orange

Lit

Lit

Lit

Projector status

The main power is switched off.

The power is switched off (in standby mode).

Projection will start when the power on <b

> button is pressed.

f

The projector may not operate when the lamp indicator <LAMP> or temperature indicator <TEMP> is lashing. (x page 129)

Projecting.

The projector is preparing to switch off the projector.

The power is switched off after a while. (Changes to the standby mode.)

ENGLISH - 47

Chapter 3

Basic Operations — Switching on/off the projector

Note

f f

While the power indicator <ON (G)/STANDBY (R)> is lit in orange, the fan is running to cool the projector.

For about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the power is switched on. After the power indicator <ON (G)/STANDBY (R)> lights in red, turn on the power again.

f

The projector consumes power even in standby mode (power indicator <ON (G)/STANDBY (R)> lit in red). Refer to “Power consumption”

(x page 151) for the power consumption.

f

The power indicator <ON (G)/STANDBY (R)> will lash if the projector receives a remote control signal.

f

The power indicator <ON (G)/STANDBY (R)> will lash slowly in green while the shutter is closed.

f

If the power indicator <ON (G)/STANDBY (R)> is lashing in red, consult your dealer.

Switching on the projector

When using the optional Projection Lens, attach the Projection Lens before switching on the projector.

Remove the lens cover irst.

4)

4)

3) 2) 1)

1)

Connect the power cord to the projector body.

2) Connect the power plug to an outlet.

f

(AC 100 V - 240 V, 50 Hz/60 Hz)

3) Press the <ON> side of the <MAIN POWER> switch to turn on the power.

f

After a short while, the power indicator <ON (G)/STANDBY (R)> will light in red, and the projector will enter the standby mode.

4) Press the power <v/b

> button on the control panel or the power on <b> button on the remote control. f

The power indicator <ON (G)/STANDBY (R)> lights in green and the image is soon projected on the screen.

Note

f

If the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with when [NORMAL] is set.

f

If the <MAIN POWER> switch was set to <OFF> during projection to end the projection using the direct power off function last time, and the

<MAIN POWER> switch is set to <ON> with the power plug connected to the outlet, the power indicator <ON (G)/STANDBY (R)> will light in green and the image will soon be projected on the screen.

Making adjustments and selections

It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.

2) 3)

1) 8)

2)

5)

7) 9)

6)

3)

4) 4)

1)

Press the <FOCUS> button to roughly adjust the focus of the image. (x page 51)

48 - ENGLISH

Chapter 3

Basic Operations — Switching on/off the projector

2) Change the setting of [PROJECTOR SETUP] menu

[PROJECTION METHOD] depending on the

installation mode. (x page 33) f

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.

3)

Press the <INPUT> button on the control panel or the input selection (<RGB1/2>, <DIGITAL LINK>,

<DVI-D>, <VIDEO>, <DisplayPort>, <HDMI>) buttons on the remote control to select the input.

4)

Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 40)

5) Press the <SHIFT> button to adjust the position of the image.

6)

If the input signal is an RGB signal, press the <AUTO SETUP> button.

7)

Press the <ZOOM> button to adjust the size of the image to match the screen.

8)

Press the <FOCUS> button again to adjust the focus.

9) Press the <ZOOM> button again to adjust the zoom and the size of the image to match the screen.

Note

f

When the projector is switched on for the irst time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu →

[INITIALIZE] is executed, the focus adjustment screen is displayed after projection starts, then the initial setting screen is displayed. Refer to

“Start-up display” (x page 24) for details.

Switching off the projector

3)

1)

1)

4)

2)

2)

1) Press the power <v/b

> button on the control panel or the power standby <v> button on the remote

control.

f The [POWER OFF(STANDBY)]

conirmation screen is displayed.

2) Press qw to select [OK], and press the <ENTER> button.

(Or press the power <v/b

> button on the control panel or the power standby <v> button on the

remote control again.)

f

Projection of the image will stop, and the power indicator <ON (G)/STANDBY (R)> on the projector body lights in orange. (The fan keeps running.)

3)

Wait for about 100 seconds until the power indicator <ON (G)/STANDBY (R)> on the projector body lights in red.

4) Press the <OFF> side of the <MAIN POWER> switch to turn off the power.

Note

f

Do not switch on the projector and project images immediately after switching off the projector.

Turning on the power while the lamp is still hot may shorten the lamp life.

f

For about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators will not light up even if the power is switched on. Even after 75 seconds, the lamp may not light up if the projector is switched on. In such a case, after the power indicator <ON (G)/STANDBY (R)> lights in red, switch on the projector again.

f The projector consumes power even when the power <v/b

> button on the control panel or the power standby <v> button on the

remote control is pressed and the projector is switched off if the main power of the projector is on.

When the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], use of some functions is restricted, but the power consumption during standby can be conserved.

ENGLISH - 49

Chapter 3

Basic Operations — Switching on/off the projector

Direct power off function

The projector can be turned off during projection or immediately after the luminous lamp is turned off by setting the <MAIN POWER> switch to

<OFF>. Also, when the projector is mounted on the ceiling or installed in an environment where the <MAIN POWER> switch of the projector cannot be easily turned <OFF>, the power can be turned off directly using the circuit breaker. It is also safe in case a power outage occurs or the power cord is pulled out immediately after the projector is switched off.

Note

f

If the projector was turned off by turning off the circuit breaker directly during projection last time, then the power indicator <ON (G)/

STANDBY (R)> will light in green a while after the circuit breaker is turned on, and then projection of the image will start.

f

If the power was turned off directly by turning the <MAIN POWER> switch to <OFF>, or the power was turned off by turning off the circuit breaker directly, projection may take a longer time than usual to start when the projector is switched on the next time.

50 - ENGLISH

Chapter 3

Basic Operations — Projecting

Projecting

Check the attachment of the Projection Lens (x page 41), external device connection (x page 42), power cord connection

(x page 47), and switch on the projector (x page 48) to start projecting. Select the image for projection, and adjust appearance of the projected image.

Selecting the input signal

Select an input signal.

1)

Press the <INPUT> button on the control panel or the input selection (<RGB1/2>, <DIGITAL LINK>,

<DVI-D>, <VIDEO>, <DisplayPort>, <HDMI>) buttons on the remote control.

f The image of the signal being input in the selected terminal is projected.

Attention

f

Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back.

Set the [PICTURE] menu

→ [SYSTEM SELECTOR].

f

Conirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu

[ASPECT].

Adjusting the focus, zoom, and shift

If the projected image or the position is not correct when the positioning of the projector and the screen is correctly installed, adjust the focus, zoom, and shift.

Using the control panel

1)

Press the <LENS> button on the control panel.

f

Pressing the button changes the adjustment screen in the order of [FOCUS], [ZOOM], and [SHIFT].

2) Select each item and press asqw to adjust it.

Using the remote control

1)

Press the lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons on the remote control.

f

<FOCUS> button: Adjusts focus.

f

<ZOOM> button: Adjusts zoom.

f

<SHIFT> button: Adjusts shift.

2) Select each item and press asqw to adjust it.

Caution

During the lens shift operation, do not insert your hand in any opening around the lens.

Your hand may be caught and result in injuries.

Note

f

When the Projection Lens without the zoom function is attached, the zoom adjustment screen will be displayed. However, operation is not possible.

f

Use the ixed-focus lens (Model No.: ET-ELW21) with the lens position set to the home position. (x page 52) f The adjustment can be performed quickly by pressing and holding asqw for at least three seconds.

f

It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.

f

Only [FOCUS] is shown in yellow so that the displayed menu item can be recognized by color, even when the projector is not focused and displayed characters are unreadable. (Factory default)

The display color of [FOCUS] depends on the setting of the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD DESIGN].

ENGLISH - 51

Chapter 3

Basic Operations — Projecting

Moving the lens to the home position

To move the lens to the home position, perform the following procedure.

1)

While the [SHIFT] adjustment screen is displayed, press the <DEFAULT> button on the remote control.

f The [HOME POSITION] screen is displayed.

LENS

HOME POSITION

ENTER

EXECUTE

MENU

CANCEL

2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the <ENTER> button.

f

[PROGRESS] is displayed in the [HOME POSITION] screen, and the lens returns to the home position.

Note

f The home position of the lens is the lens position when the lens is being replaced or when the projector is being stored, and it is not the optical center of the screen.

f You can also display the [HOME POSITION]

screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the remote control for at least three seconds.

Adjustment range by the lens position shift (optical shift)

Perform the lens position shift within the adjustment range.

The focus may change when the lens position is shifted out of the adjustment range. This is because the movement of the lens is restricted to protect the optical parts. Projection position can be adjusted with the optical axis shift based on the standard projection position in the respective range.

Lens type

Zoom lens

Standard zoom lens, ET-ELW20, ET-ELT20, ET-ELT21

Standard projection position

PT-EZ770Z, PT-EW730Z

0.1 H 0.1 H

Image width H

Standard projection position

PT-EX800Z

0.1 H 0.1 H

Image width H

Note

f

When the optional ixed-focus lens (Model No.: ET-ELW21) is attached, shift adjustment is not available.

52 - ENGLISH

Chapter 3

Basic Operations — Operating with the remote control

Operating with the remote control

Switching the input

The input for projection can be switched.

button

1)

Press the input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>, <VIDEO>, <DisplayPort>, <HDMI>) buttons.

f

This operation can be also performed using the <INPUT> button on the control panel.

<RGB1/2>

<DIGITAL LINK>

<DVI-D>

<VIDEO>

<DisplayPort>

<HDMI>

Switches the input to RGB1 or RGB2. Switches to another input when one input has already been chosen.

Switches the input to DIGITAL LINK.

Switches the input to DVI-D.

Switch the input to VIDEO.

Switches the input to DisplayPort.

Switch the input to HDMI.

Note

f

When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the <DIGITAL LINK/LAN> terminal, the ET-YFB100G input changes with each press of the <DIGITAL LINK> button. The input can also be changed using the control command of RS-232C.

For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on the twisted-pair-cable transmitter.

Using the shutter function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image and audio temporarily.

button

1)

Press the <SHUTTER> button.

f The image and audio disappear.

f

This operation can be also performed using the <SHUTTER> button on the control panel.

2) Press the <SHUTTER> button again.

f The image and audio reappear.

ENGLISH - 53

Chapter 3

Basic Operations — Operating with the remote control

Attention

f

When the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on

(closed)/off (open) in a short time.

Note

f

The power indicator <ON (G)/STANDBY (R)> will lash slowly in green while the shutter function is in use.

Using the mute function

Audio can be temporarily turned off.

button

1)

Press the <MUTE> button.

f The audio disappears.

2) Press the <MUTE> button again.

f The audio reappears.

Adjusting the volume

The volume of the built-in speaker or audio output can be adjusted.

button

1) Press the <VOL-

> button/<VOL+> button on the remote control.

f

This operation can be also performed using the <VOL-> button/<VOL+> button on the control panel.

<VOL+>

<VOL->

Increases the volume.

Decreases the volume.

Using the freeze function

The projected image can be paused and audio turned off regardless of the playback of the external device.

button

1)

Press the <FREEZE> button.

f The image freezes and audio disappears.

2) Press the <FREEZE> button again.

f

Freezing of the image is canceled and audio reappears.

Note

f

[FREEZE] is displayed on the screen when video is paused.

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display, such as the menu or the input terminal name.

button

1)

Press the <ON SCREEN> button.

f The on-screen display disappears.

2) Press the <ON SCREEN> button again.

f The on-screen display appears.

54 - ENGLISH

Chapter 3

Basic Operations — Operating with the remote control

Note

f

If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen display is turned on.

Using the presentation timer function

The presentation timer function can be operated.

Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.

button

1)

Press the <P-TIMER> button.

f The count is started.

f The elapsed time or the remaining time is displayed at the bottom right of the projected image.

2) Press the <P-TIMER> button again.

f The count is stopped.

3)

Press the <P-TIMER> button again.

f The count is resumed.

Note

f

The presentation timer is ended by holding the <P-TIMER> button down for at least three seconds.

f

For details such as presentation timer function settings, refer to [DISPLAY OPTION] menu

→ [P-TIMER] (x page 85).

Using the automatic setup function

The automatic setup function can be used to automatically adjust the resolution, clock phase, and image position when analog RGB signals consisting of bitmap images such as computer signals are being input, or to automatically adjust the image position when DVI-D/HDMI signals are input. Supplying images with bright white borders at the edges and high-contrast black and white characters is recommended when the system is in automatic adjustment mode. Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.

button

1)

Press the <AUTO SETUP> button.

f

[COMPLETE] is displayed when it has completed without any problem.

Note

f

The clock phase may shift even if it has completed without any incident. In such cases, adjust the [POSITION] menu → [CLOCK PHASE]

(x page 72).

f

If an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even when [COMPLETE] appears. In this case, adjust the settings in the [ADVANCED MENU] menu → [INPUT RESOLUTION] (x page 75),

[POSITION] → [CLOCK PHASE] (x page 72), and [SHIFT] (x page 70).

f

Adjust special signals according to the [DISPLAY OPTION] menu → [AUTO SETUP] (x page 78).

f

Automatic adjustment may not work depending on the model of the computer.

f

Automatic adjustment may not work for a synchronization signal of C-SY or SYNC ON GREEN.

f

Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.

f f

Adjustment is required for each input signal.

Automatic adjustment can be canceled by pressing the <MENU> button during the automatic adjustment operation.

f

If the automatic setup function is used while moving images are being input, the adjustment may not be performed properly even for an RGB signal that can use automatic setup. [INCOMPLETE] may appear, or adjustment may not be inished properly even if [COMPLETE] appears.

Using the keystone distortion correction function

The [KEYSTONE] menu can be displayed.

You can correct the keystone distortion that occurs when the projector is installed tilted or when the screen is tilted.

button

1)

Press the <KEYSTONE> button.

f The individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION]

([UPPER LEFT]) is displayed.

ENGLISH - 55

Chapter 3

Basic Operations — Operating with the remote control

2) Press the <KEYSTONE> button again.

f The other individual adjustment screen is displayed.

When the [KEYSTONE]

individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT]) is displayed.

Note

f

After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone distortion.

f

Either setting of [KEYSTONE] or [CORNER CORRECTION] is enabled. If the other item is adjusted after [KEYSTONE] or [CORNER

CORRECTION] was adjusted, the previous setting value will be reset.

f

If the <ENTER> button is pressed while the [CORNER CORRECTION] individual adjustment screen is displayed, the individual adjustment screen for the next corner is displayed.

f

Refer to the [POSITION] menu

→ [KEYSTONE] (x page 72) for details.

Using the digital zoom function

The [DIGITAL ZOOM] menu can be displayed.

You can enlarge images.

button

1)

Press the <D.ZOOM> button.

f The

[DIGITAL ZOOM] screen is displayed.

2) Press qw to adjust the magnification.

3)

Press the <ENTER> button.

4) Press asqw to move the zoom position.

Note

f

Refer to the [DISPLAY OPTION] menu → [DIGITAL ZOOM] (x page 86) for details.

Switching the aspect ratio of the image

You can switch aspect ratios according to the input signal.

button

1)

Press the <ASPECT> button.

f The setting will change each time you press the button.

Note

f

Refer to the [POSITION] menu

→ [ASPECT] (x page 70) for details.

Using the P IN P function

Locate a separate, small sub screen in the main screen to project two images simultaneously.

button

1)

Press the <P IN P> button.

f The setting will change each time you press the button.

Note

f

Refer to the menu [P IN P] menu (x page 100) for details.

56 - ENGLISH

Chapter 3

Basic Operations — Operating with the remote control

Using the function button

[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the <FUNCTION> button on the remote control so that it can be used as an easy shortcut button.

button

1)

Press the <FUNCTION> button.

Note

f

Assignment of the function is performed from the [PROJECTOR SETUP] menu

→ [FUNCTION BUTTON] (x page 94).

Using the status function

You can display the status of the projector.

button

1)

Press the <STATUS> button.

f The [STATUS] screen is displayed.

STATUS

INPUT

SIGNAL NAME

SIGNAL FREQUENCY

PROJECTOR RUNTIME

LAMP: ECO

: NORMAL

: TOTAL

INTAKE AIR TEMP.

AROUND LAMP TEMP.

RGB2

SXGA60+-A1

65.22kHz/ 59.99Hz

1h

100h

200h

300h

27°C/ 80°F

27°C/ 80°F

1/4

ENTER

SEND STATUS VIA E-MAIL

CHANGE

MENU

EXIT

Note

f

This can be displayed from the [PROJECTOR SETUP] menu

→ [STATUS] (x page 96).

Using the ECO management function

You can display the setting screen relating to ECO management.

button

1)

Press the <ECO> button on the remote control.

Note

f

Refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 89) for details.

ENGLISH - 57

Chapter 4

Settings

This chapter describes the settings and adjustments you can make using the on-screen menu.

58 - ENGLISH

Chapter 4

Settings — Menu navigation

Menu navigation

The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.

Navigating through the menu

Operating procedure

button

1)

Press the <MENU> button on the remote control or control panel.

f The [MAIN MENU] screen is displayed.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

P IN P

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

ENTER

MENU SELECT

SUB MENU

2) Press as to select an item from the main menu. f The selected item is highlighted in yellow.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

P IN P

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

ENTER

MENU SELECT

SUB MENU

3)

Press the <ENTER> button.

f The sub-menu items of the selected main menu are displayed.

POSITION

SHIFT

ASPECT

ZOOM

CLOCK PHASE

KEYSTONE

0

NORMAL

ENTER

MENU SELECT

SUB MENU

ENGLISH - 59

Chapter 4

Settings — Menu navigation

4) Press as

to select a sub-menu, and press qw or the <ENTER> button to change or adjust settings. f

Some items will switch in order as follows each time you press qw.

A B C f

For some items, press qw to display an individual adjustment screen with a bar scale as shown below.

0 CONTRAST

ADJUST

Note

f

Pressing the <MENU> button while the menu screen is displayed returns to the previous menu.

f

Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected. [DIGITAL CINEMA REALITY] may not be displayed depending on the input signal.

f

Some items can be adjusted even if signals are not input.

f

Individual adjustment screen is cleared automatically if no operation is performed for approximately ive seconds.

f

For menu items, refer to “Main menu” (x page 60) and “Sub-menu” (x page 61).

f

The cursor color depends on the settings of the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD DESIGN]. The selected item is displayed with the yellow cursor by the factory default.

Resetting adjustment values to the factory defaults

If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory default settings.

button

1)

Press the <DEFAULT> button on the remote control.

CONTRAST

ADJUST

0

Note

f You cannot reset all the settings to the factory default at a time.

f

To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP] menu →

[INITIALIZE] (x page 98).

f

Some items cannot be reset to the factory defaults by pressing the <DEFAULT> button on the remote control. Adjust each item manually.

f The triangular mark under the bar scale in the individual adjustment screen indicates the factory default setting. The position of the triangular mark varies according to the selected input signals.

Current adjustment value

Factory default setting

Main menu

The following items are in the main menu.

When a main menu item is selected, the screen changes to a sub-menu selection screen.

Main menu item

[PICTURE]

[POSITION]

[ADVANCED MENU]

[DISPLAY LANGUAGE]

[DISPLAY OPTION]

[PROJECTOR SETUP]

[P IN P]

60 - ENGLISH

76

77

88

100

Page

64

70

74

Chapter 4

Settings — Menu navigation

Main menu item

[TEST PATTERN]

[SIGNAL LIST]

[SECURITY]

[NETWORK]

Page

102

103

106

109

Sub-menu

The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.

[PICTURE]

Sub-menu item

[PICTURE MODE]

[CONTRAST]

[BRIGHTNESS]

[COLOR]

[TINT]

[COLOR TEMPERATURE]

[GAMMA]

[SHARPNESS]

[NOISE REDUCTION]

[IRIS]

[DAYLIGHT VIEW]

[SYSTEM SELECTOR]

*1

Depends on the signal input.

Note

f The factory default settings may vary depending on the picture mode.

Factory default

[STANDARD]

*1

[0]

[0]

[0]

[0]

[DEFAULT]

[0]

[+6]

*1

[OFF]

[OFF]

*1

[AUTO]

[YP

B

P

R

]

*1

Page

67

67

67

68

68

64

64

65

65

65

65

67

[POSITION]

Sub-menu item

[SHIFT]

[ASPECT]

[ZOOM]

[CLOCK PHASE]

[KEYSTONE]

*1

Depends on the signal input.

Factory default

[NORMAL]

*1

[0]

*1

Page

70

70

71

72

72

[ADVANCED MENU]

Sub-menu item

[DIGITAL CINEMA REALITY]

[BLANKING]

[INPUT RESOLUTION]

[CLAMP POSITION]

[RASTER POSITION]

*1

Depends on the signal input.

Factory default

[AUTO]

*1

[24]

*1

Note

f

Sub-menu items and factory default settings vary depending on the selected input terminal.

Page

74

74

75

75

75

ENGLISH - 61

[DISPLAY LANGUAGE]

Details (x page 76)

[DISPLAY OPTION]

Sub-menu item

[COLOR ADJUSTMENT]

[COLOR CORRECTION]

[SCREEN SETTING]

[AUTO SIGNAL]

[AUTO SETUP]

[RGB IN]

[DVI-D IN]

[HDMI IN]

[DIGITAL LINK IN]

[DisplayPort IN]

[ON-SCREEN DISPLAY]

[CLOSED CAPTION SETTING]

[BACK COLOR]

[STARTUP LOGO]

[SHUTTER SETTING]

[P-TIMER]

[FREEZE]

[DIGITAL ZOOM]

[PROJECTOR SETUP]

Sub-menu item

[PROJECTOR ID]

[PROJECTION METHOD]

[ECO MANAGEMENT]

[SCHEDULE]

[STARTUP INPUT SELECT]

[RS-232C]

[REMOTE2 MODE]

[FUNCTION BUTTON]

[AUDIO SETTING]

[STATUS]

[DATE AND TIME]

[SAVE ALL USER DATA]

[LOAD ALL USER DATA]

[INITIALIZE]

[SERVICE PASSWORD]

[P IN P]

Details (x page 100)

[TEST PATTERN]

Details (x page 102)

[SIGNAL LIST]

Details (x page 103)

62 - ENGLISH

Chapter 4

Settings — Menu navigation

Factory default

[OFF]

[OFF]

[OFF]

[BLUE]

[DEFAULT LOGO]

[1.5]

Factory default

[ALL]

[FRONT/FLOOR]

[OFF]

[LAST USED]

[DEFAULT]

Page

92

92

94

94

94

96

97

98

98

98

99

88

88

89

90

Page

77

77

80

80

81

81

81

78

78

78

79

84

85

86

86

83

84

84

Chapter 4

Settings — Menu navigation

[SECURITY]

Sub-menu item

[SECURITY PASSWORD]

[SECURITY PASSWORD CHANGE]

[DISPLAY SETTING]

[TEXT CHANGE]

[MENU LOCK]

[MENU LOCK PASSWORD]

[CONTROL DEVICE SETUP]

Factory default

[OFF]

[OFF]

[OFF]

Page

106

106

107

107

107

107

108

[NETWORK]

[DIGITAL LINK MODE]

Sub-menu item

[DIGITAL LINK SETUP]

[DIGITAL LINK STATUS]

[NETWORK SETUP]

[NETWORK CONTROL]

[NETWORK STATUS]

[DIGITAL INTERFACE BOX]

Factory default

[AUTO]

Page

109

109

110

110

111

111

111

Note

f

Some items may not be adjusted or used for certain signal formats to be input to the projector.

The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.

f

Sub-menu items and factory default settings vary depending on the selected input terminal.

ENGLISH - 63

[PICTURE] menu

Chapter 4

Settings — [PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to adjust.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1) Press as to select [PICTURE MODE].

2) Press qw or the <ENTER> button. f The [PICTURE MODE] individual adjustment screen is displayed.

3) Press qw to switch the item. f The items will switch each time you press the button.

[STANDARD]

[DYNAMIC]

[DICOM SIM.]

[CINEMA]

*1

[NATURAL]

*2

The image becomes suitable for moving images in general.

The light output is maximized for use in bright areas.

The image becomes similar to that of DICOM Part 14 Grayscale Standard.

The image becomes suitable for movie contents.

The image is sRGB compliant.

*1

Only for movie-based input signals

*2

Only for still image input signals

Note

f f

The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals.

When [PICTURE MODE] is set to [DICOM SIM.], [LAMP POWER] (x page 89) is ixed to [NORMAL].

f

DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the

DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.

[CONTRAST]

You can adjust the contrast of the colors.

1) Press as to select [CONTRAST].

2) Press qw or the <ENTER> button. f The [CONTRAST] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Adjustment

The screen becomes brighter.

The screen becomes darker.

Range of adjustment

-

31 - +31

Attention

f

Adjust [BRIGHTNESS] irst when you need to adjust the black level.

64 - ENGLISH

Chapter 4

Settings — [PICTURE] menu

[BRIGHTNESS]

You can adjust the dark (black) part of the projected image.

1) Press as to select [BRIGHTNESS].

2) Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Adjustment

Increases the brightness of the dark (black) parts of the screen.

Reduces the brightness of the dark (black) parts of the screen.

[COLOR]

You can adjust the color saturation of the projected image.

1) Press as to select [COLOR].

2) Press qw or the <ENTER> button. f The [COLOR] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Deepens colors.

Weakens colors.

Adjustment

[TINT]

You can adjust the skin tone in the projected image.

1) Press as to select [TINT].

2) Press qw or the <ENTER> button. f The [TINT] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Adjustment

Adjusts skin tone toward greenish color.

Adjusts skin tone toward reddish purple.

[COLOR TEMPERATURE]

You can switch the color temperature if the white areas of the projected image are bluish or reddish.

Adjusting with color temperature

Range of adjustment

-

31 - +31

Range of adjustment

-

31 - +31

Range of adjustment

-

31 - +31

1) Press as to select [COLOR TEMPERATURE].

2) Press qw or the <ENTER> button. f The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw to switch the item. f The items will switch each time you press the button.

[DEFAULT]

[USER]

[LOW]

[HIGH]

Factory default setting.

Adjusts white balance as desired. Refer to “Adjusting desired white balance” (x page 66) for details.

Becomes a reddish image. Select this when the white areas of the projected image are bluish.

Becomes a bluish image. Select this when the white areas of the projected image are reddish.

ENGLISH - 65

Chapter 4

Settings — [PICTURE] menu

Note

f

When [COLOR ADJUSTMENT] (x page 77) is set to other than [OFF], [COLOR TEMPERATURE] is ixed to [USER].

Adjusting desired white balance

1) Press as to select [COLOR TEMPERATURE].

2) Press qw or the <ENTER> button. f The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw

button to select [USER].

4)

Press the <ENTER> button.

f The [COLOR TEMPERATURE] screen is displayed.

5) Press as to select [WHITE BALANCE].

6)

Press the <ENTER> button.

f The [WHITE BALANCE] screen is displayed.

7) Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].

8)

Press the <ENTER> button.

f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.

9) Press as to select [RED], [GREEN], or [BLUE].

10) Press qw to adjust the level.

Item

[RED]

[GREEN]

[BLUE]

Operation

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Press the w button.

Press the q button.

Adjustment

Deepens red.

Weakens red.

Deepens green.

Weakens green.

Deepens blue.

Weakens blue.

Range of adjustment

[WHITE BALANCE HIGH]: 0 - +255 (factory default is

+255)

[WHITE BALANCE LOW]: -127 - +127 (factory default is

0)

Note

f

Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.

f

When [COLOR ADJUSTMENT] (x page 77) is set to other than [OFF], [WHITE BALANCE HIGH] cannot be adjusted.

Changing the [USER] name

1) Press as to select [COLOR TEMPERATURE].

2) Press qw or the <ENTER> button. f The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw to select [USER].

4)

Press the <ENTER> button.

f The [COLOR TEMPERATURE] screen is displayed.

5) Press as to select [COLOR TEMPERATURE NAME CHANGE].

6)

Press the <ENTER> button.

f The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.

7) Press asqw

to select the text, and press the <ENTER> button to enter the text.

8) Press asqw

to select [OK], and press the <ENTER> button.

f The name set to color temperature is changed.

66 - ENGLISH

Chapter 4

Settings — [PICTURE] menu

Note

f

When a name is changed, display of [USER] is also changed.

[GAMMA]

You can adjust contrast balance.

1) Press as to select [GAMMA].

2) Press qw or the <ENTER> button. f The [GAMMA] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press w.

Press q.

Adjustment

The midtones become brighter.

The midtones become darker.

[SHARPNESS]

You can adjust the sharpness of the projected image.

1) Press as to select [SHARPNESS].

2) Press qw or the <ENTER> button. f The [SHARPNESS] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press the w button.

Press the q button.

Contours become sharper.

Contours become softer.

Adjustment

Range of adjustment

-

8 - +7

Range of adjustment

0 - +15

Note

f

If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will become [+15].

[NOISE REDUCTION]

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

1) Press as to select [NOISE REDUCTION].

2) Press qw or the <ENTER> button. f The [NOISE REDUCTION] individual adjustment screen is displayed.

3) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[1]

[2]

[3]

No correction.

Slightly corrects the noise.

Moderately corrects the noise.

Strongly corrects the noise.

Attention

f

When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].

[IRIS]

Aperture correction is performed automatically based on the image to result in an image of optimum contrast.

1) Press as to select [IRIS].

2) Press qw or the <ENTER> button. f The [IRIS] individual adjustment screen is displayed.

ENGLISH - 67

Chapter 4

Settings — [PICTURE] menu

3) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

No correction.

Automatically corrects the aperture.

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.

1) Press as to select [DAYLIGHT VIEW].

2) Press qw or the <ENTER> button. f The [DAYLIGHT VIEW] individual adjustment screen is displayed.

3) Press qw to switch the item. f The items will switch each time you press the button.

[AUTO]

[OFF]

[1]

[2]

[3]

The brightness of the room is detected by the luminance sensor, and the vividness of the image is automatically corrected.

No correction.

Corrects the image to weaken vividness.

Corrects the image to medium vividness.

Corrects the image to high vividness.

Note

f

When [PROJECTION METHOD] (x page 88) is set to [REAR/FLOOR] or [REAR/CEILING], [AUTO] cannot be selected.

f

When objects, etc. are placed on the top of the projector, the [AUTO] mode may not function properly.

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal.

1) Press as to select [SYSTEM SELECTOR].

2) Press the <ENTER> button.

3) Press as to select a system format. f

Available system formats vary depending on the input signal.

Terminal

<VIDEO IN> terminal,

<VIDEO/G/Y>/<B/P

B terminals

/C>

<RGB 1 IN> terminal, <RGB 2

IN> terminal

<DVI-D IN> terminal

<HDMI IN> terminal, <DIGITAL

LINK/LAN> terminal,

<DisplayPort IN> terminal

System format

Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].

Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],

[PAL-M], [PAL-N], [SECAM], or [PAL60].)

Switch the setting to the signal method for the TV used.

480i, 576i, or 576p signal

VGA60 or 480p signal

Select [RGB] or [YC

B

C

R

].

Select from [VGA60], [480p YC

Other movie-based signals

Select [RGB] or [YP

B

P

R

].

B

C

R

], or [480p RGB].

480i, 576i, 480p, or 576p signal

Select [RGB] or [YC

B

C

R

].

Other movie-based signals

Select [RGB] or [YP

B

P

R

].

480i, 576i, 480p, or 576p signal

Select [AUTO], [RGB], or [YC

B

C

R

].

Other movie-based signals

Select [AUTO], [RGB], or [YP

B

P

R

].

4)

Press the <ENTER> button.

Note

f

Refer to “List of compatible signals” (x page 148) for the types of video signals that can be used with the projector.

f

This may not function properly for some connected external devices.

68 - ENGLISH

Chapter 4

Settings — [PICTURE] menu

sRGB-compliant video

sRGB is an international standard (IEC61966-2-1) for color reproduction deined by IEC (International Electrotechnical Commission).

Set according to the following steps to reproduce more faithful, sRGB compliant colors.

1) Set [COLOR ADJUSTMENT] to [OFF].

f

Refer to [COLOR ADJUSTMENT] (x page 77).

2) Set [COLOR CORRECTION] to [OFF].

f

Refer to [COLOR CORRECTION] (x page 77).

3) Display the [PICTURE] menu.

f

Refer to “[PICTURE] menu” (x page 64).

4) Press as to select [PICTURE MODE].

5) Press qw to set [NATURAL].

6) Press as to select [COLOR].

7)

Press the <DEFAULT> button on the remote control to set the factory default setting.

8)

Follow Steps 6) - 7) to set [TINT], [COLOR TEMPERATURE], and [GAMMA] to the factory default settings.

9) Display the [PICTURE] menu.

10) Press as to select [DAYLIGHT VIEW].

11) Press qw

button to set [OFF].

Note

f sRGB is available for RGB signal input only.

ENGLISH - 69

Chapter 4

Settings — [POSITION] menu

[POSITION] menu

On the menu screen, select [POSITION] from the main menu, and select an item from the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to adjust.

[SHIFT]

Move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relative position of the projector and the screen is installed correctly.

1) Press as to select [SHIFT].

2) Press the <ENTER> button.

f The [SHIFT] screen is displayed.

3) Press asqw to adjust the position.

Orientation Operation Adjustment

Press the a button.

The image position moves up.

Vertical (up and down) adjustment

Press the s button.

The image position moves down.

Press the w button.

The image position moves to the right.

Horizontal (right and left) adjustment

Press the q button.

The image position moves to the left.

[ASPECT]

You can switch the aspect ratio of the image.

The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] irst. (x page 78)

1) Press as to select [ASPECT].

2) Press qw or the <ENTER> button. f The [ASPECT] individual adjustment screen is displayed.

3) Press qw to switch the item. f The items will switch each time you press the button.

[NORMAL]

Displays images without changing the aspect ratio of the input signals.

70 - ENGLISH

Chapter 4

Settings — [POSITION] menu

[VID AUTO]

[AUTO]

[WIDE]

[4:3]

[H FIT]

[V FIT]

[FULL]

*2

[NATIVE]

*1

The projector identiies the video ID (VID) embedded in the video signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC signals.

The projector identiies the video ID (VID) embedded in the video signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p signals.

Displays images without changing the resolution of the input signals.

Displays images with the aspect ratio converted to 16:9 when standard signals are input

*3

. Display images without changing the aspect ratio when wide-screen signals are input

*4

.

Displays images without changing the aspect ratio when standard signals are input

*3

. Displays images without changing the aspect ratio so that the images will it in the 4:3 screen when wide-screen signals are input

*2

.

Displays images using the entire width of the screen. When signals have the aspect ratio vertically longer than the aspect ratio of the screen selected in [SCREEN FORMAT], the images are displayed with the top and bottom parts cut off.

Displays images using the entire height of the screen range selected in [SCREEN FORMAT]. When signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in

[SCREEN FORMAT], the images are displayed with the right and left parts cut off.

Displays images in the entire screen range selected in [SCREEN FORMAT]. When the aspect ratio of the input signals differs from that of the screen range, the images are displayed with the aspect ratio converted to that of the screen selected in [SCREEN FORMAT].

*1

For video signals (NTSC) and Y/C signals (NTSC) only

*2

During RGB signal (480i, 480p) input

*3

Standard signals are input signals with an aspect ratio of 4:3 or 5:4.

*4

Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.

Note

f

Some size modes are not available for certain types of input signals. [NORMAL] cannot be selected for video signal (NTSC), Y/C signal

(NTSC), and RGB signal (480i, 480p).

f

If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.

Be careful of this when selecting the aspect ratio.

f

If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original copyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratio adjustment and zoom function.

f

If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the images may not be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the original format intended by the creator of the images.

[ZOOM]

You can adjust the image size.

When [ASPECT] is set to other than [NORMAL] and [NATIVE]

1) Press as

to select [ZOOM].

2) Press the <ENTER> button.

f The

[ZOOM] screen is displayed.

3) Press as to select [INTERLOCKED].

4) Press qw to switch the item.

[OFF]

[ON]

Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.

Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the same magniication.

5) Press as to select [VERTICAL] or [HORIZONTAL]. f

If [ON] is selected, select [BOTH].

6) Press qw to adjust.

Note

f

When [ASPECT] is set to [NATIVE], [ZOOM] cannot be adjusted.

ENGLISH - 71

Chapter 4

Settings — [POSITION] menu

When [ASPECT] is set to [NORMAL]

1) Press as

to select [ZOOM].

2) Press the <ENTER> button.

f The

[ZOOM] screen is displayed.

3) Press as to select [MODE].

4) Press qw to switch the item.

[INTERNAL]

[FULL]

Enlarges the size within the aspect range set with [SCREEN FORMAT].

Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].

5) Press as to select [INTERLOCKED].

6) Press qw to switch the item.

[OFF]

[ON]

Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.

Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the same magniication.

7) Press as

to select [VERTICAL] or [HORIZONTAL].

f

If [ON] is selected, select [BOTH].

8) Press qw to adjust.

Note

f

When [ASPECT] is not set to [NORMAL], [MODE] is not displayed.

[CLOCK PHASE]

You can adjust to achieve an optimal image when there is a lickering image or smeared outlines.

1) Press as to select [CLOCK PHASE].

2) Press qw or the <ENTER> button. f The [CLOCK PHASE] individual adjustment screen is displayed.

3) Press qw to adjust. f

Adjustment value will change between [0] and [+31]. Adjust so that the amount of interference is at a minimum.

Note

f

Certain signals may not be adjustable.

f

Optimal value may not be achieved if the output from the input computer is unstable.

f

Optimal value may not be achieved when there is a shift in the total dot numbers.

f

[CLOCK PHASE] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.

f

[CLOCK PHASE] cannot be adjusted when a digital signal is input.

f

If you press w while the adjustment value is [+31], the value will become [0]. If you press q while the adjustment value is [0], the value will become [+31].

[KEYSTONE]

You can correct the keystone distortion that occurs when the projector is installed tilted or when the screen is tilted.

Setting [KEYSTONE]

1) Press as to select [KEYSTONE].

2) Press the <ENTER> button.

3) Press as to select [KEYSTONE].

4)

Press the <ENTER> button.

f The [KEYSTONE] individual adjustment screen is displayed.

5) Press asqw to adjust.

72 - ENGLISH

[VERTICAL]

Chapter 4

Settings — [POSITION] menu

[KEYSTONE]

[HORIZONTAL]

Setting [CORNER CORRECTION]

1) Press as to select [KEYSTONE].

2) Press the <ENTER> button.

3) Press as to select [CORNER CORRECTION].

4)

Press the <ENTER> button.

f The [CORNER CORRECTION] screen is displayed.

5) Press as to select the item to adjust, and press the <ENTER> button. f The [CORNER CORRECTION]

individual adjustment screen ([UPPER LEFT], [UPPER RIGHT], [LOWER LEFT] or [LOWER RIGHT]) is displayed.

6) Press asqw to adjust.

[UPPER LEFT] [UPPER RIGHT]

[CORNER CORRECTION]

[LOWER LEFT] [LOWER RIGHT]

Note

f

Either setting of [KEYSTONE] or [CORNER CORRECTION] is enabled. If the other item is adjusted after [KEYSTONE] or [CORNER

CORRECTION] was adjusted, the previous setting value will be reset.

f

If the <KEYSTONE> button is pressed on the remote control while the [KEYSTONE] or [CORNER CORRECTION] screen is displayed, the screen will be switched to the other adjustment screen.

f

Pressing the <ENTER> button while the [CORNER CORRECTION] individual adjustment screen is displayed will also display the individual adjustment screen for the next corner.

f

Correcting up to ±40° for the tilt in the vertical direction (maximum value when adjusting only [VERTICAL]), and up to ±30° for the tilt in the horizontal direction (maximum value when adjusting only [HORIZONTAL]) are available for adjustments with [KEYSTONE]. (Maximum correction amount may be reduced depending on the Projection Lens in use or lens position by shift adjustment.) However, the image quality will degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible.

f

Screen size will also change when [KEYSTONE] is used to perform various adjustments.

ENGLISH - 73

Chapter 4

Settings — [ADVANCED MENU] menu

[ADVANCED MENU] menu

On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to adjust.

[DIGITAL CINEMA REALITY]

You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.

1) Press as to select [DIGITAL CINEMA REALITY].

2) Press qw to switch the item. f The items will switch each time you press the button.

[AUTO]

[OFF]

[30p FIXED]

[25p FIXED]

Performs automatic detection and cinema processing. (Factory default)

Does not perform cinema processing.

Only during 480i or 1080/60i signal input

Performs forced cinema processing (2:2 pulldown).

Only during 576i or 1080/50i signal input

Note

f

In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p

FIXED]. (Vertical resolution will degrade.)

[BLANKING]

You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while an image from the VCR or other devices are projected.

1) Press as to select [BLANKING].

2) Press the <ENTER> button.

f The [BLANKING] adjustment screen is displayed.

3) Press as

to select [UPPER], [LOWER], [LEFT], or [RIGHT].

4) Press qw

to adjust the blanking width.

Blanking correction Item Range of adjustment Operation

Press the q button.

The blanking zone moves upward.

Adjustment

Top of the screen [UPPER]

Press the w button.

Press the w button.

The blanking zone moves downward.

The blanking zone moves upward.

PT-EZ770Z: Top to bottom

0 - 599

PT-EW730Z: Top to bottom

0 - 399

PT-EX800Z: Top to bottom

0 - 383

Bottom of the screen

[LOWER]

Press the q button.

The blanking zone moves downward.

74 - ENGLISH

Blanking correction

Left side of the screen

Item

Chapter 4

Settings — [ADVANCED MENU] menu

Operation

Press the w button.

The blanking zone moves to the right.

Adjustment

[LEFT]

Press the q button.

The blanking zone moves to the left.

Right side of the screen

[RIGHT]

Press the q button.

The blanking zone moves to the right.

Press the w button.

The blanking zone moves to the left.

Range of adjustment

PT-EZ770Z: Left to right

0 - 959

PT-EW730Z: Left to right

0 - 639

PT-EX800Z: Left to right

0 - 511

[INPUT RESOLUTION]

You can adjust to achieve an optimal image when there is a lickering image or smeared outlines.

1) Press as to select [INPUT RESOLUTION].

2) Press the <ENTER> button.

f The [INPUT RESOLUTION] screen is displayed.

3) Press as

to select [TOTAL DOTS], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], and press

qw to adjust each item. f

Values corresponding to the signal being input are displayed automatically for each item. Increase or decrease the displayed values and adjust to the optimal point viewing the screen when there are vertical stripes or sections are missing from the screen.

Note

f Previously mentioned vertical banding will not occur with all white signal input.

f

[INPUT RESOLUTION] can be adjusted only when an RGB signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.

f

Certain signals may not be adjustable.

[CLAMP POSITION]

You can adjust the optimal point when the black part of the image is blunt or it has turned green.

1) Press as to select [CLAMP POSITION].

2) Press qw to adjust.

Status

The black part is blunt.

The black part is green.

Rough guide for optimal value

The point where bluntness of the black part improves the most is the optimal value.

The point where the green part becomes black, and the bluntness has improved is the optimal value.

Range of adjustment

1 - 255

Note

f

[CLAMP POSITION] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.

f

Certain signals may not be adjustable.

[RASTER POSITION]

This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area.

1) Press as to select [RASTER POSITION].

2) Press the <ENTER> button.

f The [RASTER POSITION] screen is displayed.

3) Press asqw to adjust the position.

ENGLISH - 75

Chapter 4

Settings — [DISPLAY LANGUAGE] menu

[DISPLAY LANGUAGE] menu

On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f Press as

to select a language, and press the <ENTER> button to set.

Changing the display language

You can select the language of the on-screen display.

DISPLAY LANGUAGE

ENTER

SELECT

SET

f Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.

f

The language can be changed to English, German, French, Spanish, Italian, Portuguese, Japanese, Chinese, Russian, or Korean.

Note

f

The on-screen display language of the projector is set to English by default and when [ALL USER DATA] (x page 98) in [INITIALIZE] is executed.

76 - ENGLISH

Chapter 4

Settings — [DISPLAY OPTION] menu

[DISPLAY OPTION] menu

On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to set.

[COLOR ADJUSTMENT]

Correct the color difference between projectors when using multiple projectors simultaneously.

1) Press as to select [COLOR ADJUSTMENT].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[3COLORS]

[7COLORS]

Color adjustment is not carried out.

Adjusts the three colors [RED], [GREEN], or [BLUE].

Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].

3)

Select [3COLORS] or [7COLORS], and press the <ENTER> button.

f The [3COLORS] or [7COLORS] screen is displayed.

4) Press as

to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],

[YELLOW], or [WHITE] for [7COLORS]).

5) Press the <ENTER> button.

f The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.

For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],

[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.

f

Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

6) Press as

to select [RED], [GREEN], or [BLUE].

7) Press qw to adjust. f The adjustment value changes between 0

*1

and 2 048.

*1 The lower limit varies depending on the adjusting color.

Note

f

Operation when correcting the adjustment color

When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.

When correction color red is changed: Red is added to or subtracted from the adjustment color.

When correction color green is changed: Green is added to or subtracted from the adjustment color.

When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

f This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.

f

Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.

f

Pressing the <DEFAULT> button on the remote control will restore the factory default settings for all items.

f

If [COLOR ADJUSTMENT] is set to other than [OFF], [COLOR CORRECTION] is ixed to [OFF], and [COLOR TEMPERATURE] is ixed to

[USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)

[COLOR CORRECTION]

Colors can be adjusted and registered for each input signal format.

1) Press as to select [COLOR CORRECTION].

2) Press qw to switch the item. f The items will switch each time you press the button.

ENGLISH - 77

[OFF]

[USER]

Chapter 4

Settings — [DISPLAY OPTION] menu

Standard setting

For each of the following four signal formats: VIDEO, Y/C, RGB, and YP

B

P

R

/YC

B

C

R to set the details. Adjustment is possible within the range of -31 - +31.

, six colors of red, green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button

[SCREEN SETTING]

Set the screen size.

Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screen in use.

1) Press as to select [SCREEN SETTING].

2) Press the <ENTER> button.

f The [SCREEN SETTING] screen is displayed.

3) Press qw to switch the [SCREEN FORMAT] item. f The items will switch each time you press the button.

Model No.

PT-EZ770Z

PT-EW730Z

PT-EX800Z

[SCREEN FORMAT]

[16:10]

[4:3]

[16:9]

[16:10]

[16:9]

[4:3]

[16:9]

Range when [SCREEN POSITION] is selected

Cannot be adjusted.

Adjusts the horizontal position between -160 and 160.

Adjusts the vertical position between -60 and 60.

Cannot be adjusted.

Adjusts the vertical position between -40 and 40.

Cannot be adjusted.

Adjusts the vertical position between -96 and 96.

4) Press as to select [SCREEN POSITION]. f

If [SCREEN FORMAT] is set to [16:10] on PT-EZ770Z, PT-EW730Z, or [SCREEN FORMAT] is set to [4:3] on PT-EX800Z, then selection and adjustment of [SCREEN POSITION] are not available.

5) Press qw to adjust [SCREEN POSITION].

[AUTO SIGNAL]

Set whether to execute automatic setup of signals automatically.

The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.

1) Press as to select [AUTO SIGNAL].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Sets the auto signal function to off.

Executes automatic setup automatically when images are changed to unregistered signals during projection.

[AUTO SETUP]

Set this when adjusting a special signal or horizontally long (such as 16:9) signal.

Setting with [MODE]

1) Press as to select [AUTO SETUP].

2) Press the <ENTER> button.

f The [AUTO SETUP] screen is displayed.

3) Press as to select [MODE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[DEFAULT]

Standard setting.

78 - ENGLISH

Chapter 4

Settings — [DISPLAY OPTION] menu

[WIDE]

[USER]

Select when an image aspect ratio is a wide-screen signal, which does not meet the [DEFAULT] settings.

Select when receiving a signal with a special horizontal resolution (number of display dots).

f

When [DEFAULT] or [WIDE] is selected, proceed to Step 7).

f

When [USER] is selected, proceed to Step 5).

5) Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontal

resolution of the signal source.

6) Press as to select [MODE].

7)

Press the <ENTER> button.

f

Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the

[AUTO SETUP] screen.

Adjusting position automatically

1) Press as to select [AUTO SETUP].

2) Press the <ENTER> button.

f The [AUTO SETUP] screen is displayed.

3) Press as to select [POSITION ADJUST].

4) Press qw to switch the item.

[ON]

[OFF]

Adjust the screen position and size when automatic setup is executed.

Does not perform automatic adjustment.

Adjusting signal level automatically

1) Press as to select [AUTO SETUP].

2) Press the <ENTER> button.

f The [AUTO SETUP] screen is displayed.

3) Press as to select [SIGNAL LEVEL ADJUST].

4) Press qw to switch the item.

[OFF]

[ON]

Does not perform automatic adjustment.

Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu

[CONTRAST]) when automatic setup is executed.

Note

f

[SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.

[RGB IN]

Set to match the signal to input to the <RGB 1 IN> terminal and <RGB 2 IN> terminal.

Switching the slice level of an input sync signal

1) Press as to select [RGB IN].

2) Press the <ENTER> button.

f The [RGB IN] screen is displayed.

3) Press as

to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].

4) Press qw to switch the item.

[LOW]

[HIGH]

Sets the slice level to [LOW].

Sets the slice level to [HIGH].

ENGLISH - 79

Chapter 4

Settings — [DISPLAY OPTION] menu

Setting [RGB2 INPUT SETTING]

1) Press as to select [RGB IN].

2) Press the <ENTER> button.

f The [RGB IN] screen is displayed.

3) Press as

to select [RGB2 INPUT SETTING].

4) Press qw to switch the item. f The items will switch each time you press the button.

[RGB/YP

B

P

R

]

[Y/C]

[VIDEO]

Select when inputting RGB signals or YC

B

C

R

/YP

B

P

R

signals to the <RGB 2 IN> terminal.

Select when inputting luminance signals and color signals to the <RGB 2 IN> terminal.

Select when inputting video signals to the <RGB 2 IN> terminal.

[DVI-D IN]

Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.

1) Press as to select [DVI-D IN].

2) Press the <ENTER> button.

f The [DVI-D IN] screen is displayed.

3) Press as to select [EDID].

4) Press qw to switch the item. f The items will switch each time you press the button.

[EDID3]

[EDID1]

[EDID2:PC]

Recognizes movie-based video signals and still image signals automatically.

Select mainly when an external device that outputs movie-based video signals (such as a Blu-ray disc player) is connected to the <DVI-D IN> terminal.

Select mainly when an external device that outputs still image video signals (such as a computer) is connected to the <DVI-D IN> terminal.

5) Press as to select [SIGNAL LEVEL].

6) Press qw to switch the item. f The items will switch each time you press the button.

[AUTO]

[0-255:PC]

[16-235]

Automatically sets the signal level.

Select when the DVI-D terminal output of an external device (such as a computer) is connected to the

<DVI-D IN> terminal.

Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is connected to the <DVI-D IN> terminal via a conversion cable or similar cable.

Note

f

The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

f

The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 148) for a resolution that supports plug and play.

[HDMI IN]

Set the signal level when HDMI input is selected.

1) Press as to select [HDMI IN].

2) Press the <ENTER> button.

f The [HDMI IN] screen is displayed.

3) Press qw to switch the [SIGNAL LEVEL] item. f The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

80 - ENGLISH

[64-940]

[0-1023]

Chapter 4

Settings — [DISPLAY OPTION] menu

Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is connected to the <HDMI IN> terminal.

Select when the DVI-D terminal output of an external device (such as a computer) is connected to the

<HDMI IN> terminal via a conversion cable or similar cable.

Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI

IN> terminal.

Note

f

The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

f The displayed signal level is assumed when the input is 30 bits.

[DIGITAL LINK IN]

Set the signal level when DIGITAL LINK input is selected.

1) Press as to select [DIGITAL LINK IN].

2) Press the <ENTER> button.

f The [DIGITAL LINK IN] screen is displayed.

3) Press qw to switch [SIGNAL LEVEL]. f The items will switch each time you press the button.

[AUTO]

[64-940]

[0-1023]

Automatically sets the signal level.

Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.

Select when the DVI-D terminal output or HDMI terminal output of an external device (such as a computer) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.

Note

f

The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

f The displayed signal level is assumed when the input is 30 bits.

[DisplayPort IN]

Set the signal level when DisplayPort input is selected.

1) Press as to select [DisplayPort IN].

2) Press the <ENTER> button.

f The [DisplayPort IN] screen is displayed.

3) Press qw to switch [SIGNAL LEVEL]. f The items will switch each time you press the button.

[AUTO]

[64-940]

[0-1023]

Automatically sets the signal level.

Select when the dark parts of the screen rise up as black.

Select when bright parts of the screen are dropped out white and dark parts are illed in as solid black.

Note

f

The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

f The displayed signal level is assumed when the input is 30 bits.

[ON-SCREEN DISPLAY]

Set the on-screen display.

Setting [OSD POSITION]

Set the position of the menu screen (OSD).

1) Press as to select [ON-SCREEN DISPLAY].

ENGLISH - 81

Chapter 4

Settings — [DISPLAY OPTION] menu

2) Press the <ENTER> button.

f The [ON-SCREEN DISPLAY] screen is displayed.

3) Press as to select [OSD POSITION].

4) Press qw to switch the item. f The items will switch each time you press the button.

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[1]

Sets to the center left of the screen.

Sets to the bottom left of the screen.

Sets to the top center of the screen.

Sets to the center of the screen.

Sets to the bottom center of the screen.

Sets to the upper right of the screen.

Sets to the center right of the screen.

Sets to the bottom right of the screen.

Sets to the upper left of the screen.

Setting [OSD DESIGN]

Set the color of the menu screen (OSD).

1) Press as to select [ON-SCREEN DISPLAY].

2) Press the <ENTER> button.

f The [ON-SCREEN DISPLAY] screen is displayed.

3) Press as to select [OSD DESIGN].

4) Press qw to switch the item. f The items will switch each time you press the button.

[1]

[2]

[3]

[4]

[5]

[6]

Sets to yellow.

Sets to blue.

Sets to white.

Sets to green.

Sets to peach.

Sets to brown.

Setting [OSD MEMORY]

Set hold for the position of the menu screen (OSD) cursor.

1) Press as to select [ON-SCREEN DISPLAY].

2) Press the <ENTER> button.

f The [ON-SCREEN DISPLAY] screen is displayed.

3) Press as to select [OSD MEMORY].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Holds the cursor position.

Does not hold the cursor position.

Note

f

Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned

<OFF>.

Setting [INPUT GUIDE]

Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the

[OSD POSITION].

1) Press as to select [ON-SCREEN DISPLAY].

82 - ENGLISH

Chapter 4

Settings — [DISPLAY OPTION] menu

2) Press the <ENTER> button.

f The [ON-SCREEN DISPLAY] screen is displayed.

3) Press as to select [INPUT GUIDE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Displays the input guide.

Hides the input guide.

Setting [WARNING MESSAGE]

Set the display/hide of the warning message.

1) Press as to select [ON-SCREEN DISPLAY].

2) Press the <ENTER> button.

f The [ON-SCREEN DISPLAY] screen is displayed.

3) Press as to select [WARNING MESSAGE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Displays the warning message.

Hides the warning message.

[CLOSED CAPTION SETTING] (NTSC or 480i YC

B

C

R

signal input only)

Set closed captions.

Selecting the closed caption display

1) Press as to select [CLOSED CAPTION SETTING].

2) Press the <ENTER> button.

f The [CLOSED CAPTION SETTING] screen is displayed.

3) Press as to select [CLOSED CAPTION].

4) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Hides closed captions.

Displays closed captions.

f

When [ON] is selected, proceed to Step 5).

5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Setting the closed caption display

1) Press as to select [CLOSED CAPTION SETTING].

2) Press the <ENTER> button.

f The [CLOSED CAPTION SETTING] screen is displayed.

3) Press as to select [MODE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[CC1]

[CC2]

[CC3]

[CC4]

Displays CC1 data.

Displays CC2 data.

Displays CC3 data.

Displays CC4 data.

ENGLISH - 83

Chapter 4

Settings — [DISPLAY OPTION] menu

Note

f

Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed depending on the connected devices or contents being played back.

f

[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YC

B

C

R

signal is input.

f

If [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption function to be connected or contents to be used.

f

If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu

→ [DISPLAY SETTING]

(x page 107) is not displayed.

f

Closed captions are not displayed when the menu screen is displayed.

[BACK COLOR]

Set the display of the projected screen when there is no signal input.

1) Press as to select [BACK COLOR].

2) Press qw to switch the item. f The items will switch each time you press the button.

[BLUE]

[BLACK]

[DEFAULT LOGO]

[USER LOGO]

Displays the entire projection area in blue.

Displays the entire projection area in black.

Displays the Panasonic logo.

Displays the image registered by the user.

Note

f

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[STARTUP LOGO]

Set the logo display when the power is turned on.

1) Press as to select [STARTUP LOGO].

2) Press qw to switch the item. f The items will switch each time you press the button.

[DEFAULT LOGO]

[USER LOGO]

[NONE]

Displays the Panasonic logo.

Displays the image registered by the user.

Disables the startup logo display.

Note

f

The startup logo will disappear in approximately 15 seconds.

f

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[SHUTTER SETTING]

Set automatic opening and closing of the shutter when the power is turned off/on.

Setting [STARTUP]

1) Press as to select [SHUTTER SETTING].

2) Press the <ENTER> button.

f The [SHUTTER SETTING] screen is displayed.

3) Press as to select [STARTUP].

4) Press qw to switch the item.

[OPEN]

[CLOSE]

Projection begins with the shutter open when the power is turned on.

Projection begins with the shutter close when the power is turned on.

Setting [SHUT-OFF]

1) Press as to select [SHUTTER SETTING].

84 - ENGLISH

Chapter 4

Settings — [DISPLAY OPTION] menu

2) Press the <ENTER> button.

f The [SHUTTER SETTING] screen is displayed.

3) Press as to select [SHUT-OFF].

4) Press qw to switch the item.

[KEEP CURRENT STATE]

When the projector is switched off, the projector turns into standby with the shutter status as is.

[OPEN]

When the projector is switched off, the projector turns into standby with the shutter left opened.

[CLOSE]

When the projector is switched off, the projector turns into standby with the shutter left closed.

[P-TIMER]

Set and operate the presentation timer function.

Setting the mode

1) Press as to select [P-TIMER].

2) Press the <ENTER> button.

f The [P-TIMER] screen is displayed.

3) Press as to select [MODE].

4) Press qw to switch the item.

[COUNT UP]

[COUNT DOWN]

Displays the elapsed time since the count was started.

Displays the remaining time of the time set by [TIMER].

Setting the timer

1) Press as to select [P-TIMER].

2) Press the <ENTER> button.

f The [P-TIMER] screen is displayed.

3) Press as to select [TIMER].

4) Press qw to set the time. f

The time can be set in 1-minute increments from 1 to 180 minutes.

f The factory default value is 10 minutes.

Note

f

[TIMER] is enabled when [MODE] is set to [COUNT DOWN].

Using the presentation timer

1) Press as to select [P-TIMER].

2) Press the <ENTER> button.

f The [P-TIMER] screen is displayed.

3) Press as

to select the item, and press the <ENTER> button.

[START]

[STOP]

[RESTART]

[RESET]

The count is started.

The count is stopped.

The count is resumed.

The count is reset.

f

When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the projected image.

f

When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the bottom right of the projected image.

f

When [RESET] is selected, proceed to Step 4).

ENGLISH - 85

Chapter 4

Settings — [DISPLAY OPTION] menu

4)

Press the <MENU> button three times to clear.

f The start time is displayed at the bottom right of the projected image.

Note

f

Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (x page 55) f

The security message set in the [SECURITY] menu

→ [DISPLAY SETTING] (x page 107) is not displayed when the elapsed time or remaining time is displayed.

f The elapsed time or remaining time are not displayed when the menu screen is displayed.

f

The start time becomes “000:00” when [MODE] is set to [COUNT UP].

f

When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].

f

The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.

Ending the presentation timer

1) Press as to select [P-TIMER].

2) Press the <ENTER> button.

f The [P-TIMER] screen is displayed.

3) Press as to select [EXIT].

4)

Press the <ENTER> button.

[FREEZE]

The projected image is paused and audio turned off regardless of the playback of the external device.

1) Press as

to select [FREEZE].

2) Press the <ENTER> button.

f

Press the <MENU> button to release.

Note

f

[FREEZE] is displayed on the screen when video is paused.

[DIGITAL ZOOM]

Enlarge images and move the image zoom position.

ABC

ABC

ABC

ABC

ABC

Fig. 1

1) Press as

to select [DIGITAL ZOOM].

2) Press the <ENTER> button.

f The

[DIGITAL ZOOM] screen is displayed.

3) Press qw to adjust the magnification.

Operation

Press w.

Press q.

Adjustment

Raises the magniication.

Lowers the magniication.

4)

Press the <ENTER> button.

5) Press asqw to move the zoom position. (Fig. 1)

86 - ENGLISH

+1.0 - +2.0

Range of adjustment

Chapter 4

Settings — [DISPLAY OPTION] menu

Note

f

The magniication can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magniication can be adjusted up to 3.0x.

f

The digital zoom function is canceled if the <MENU> button is pressed during a digital zoom.

f The digital zoom function is canceled if the input signal changes during a digital zoom.

f

During a digital zoom, the freeze function is disabled.

ENGLISH - 87

Chapter 4

Settings — [PROJECTOR SETUP] menu

[PROJECTOR SETUP] menu

On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to set.

[PROJECTOR ID]

The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via a single remote control.

1) Press as to select [PROJECTOR ID].

2) Press qw to switch the item. f The items will switch each time you press the button.

[ALL]

[1] - [64]

Select when controlling projectors without specifying an ID number.

Select when specifying an ID number to control individual projector.

Note

f

To specify an ID number for individual control, the ID number of a remote control must match the ID number of the projector.

f

When the ID number is set to [ALL], the projector will operate regardless of the ID number speciied during remote control or computer control.

If multiple projectors are set up side by side with IDs set to [ALL], they cannot be controlled separately from the projectors with other ID numbers.

f

Refer to “Setting the ID number of the remote control” (x page 30) for how to set the ID number on the remote control.

[PROJECTION METHOD]

Set the projection method in accordance with the installation status of the projector.

Change the projection method if the screen display is upside down or inverted.

1) Press as to select [PROJECTION METHOD].

2) Press the <ENTER> button.

f The [PROJECTION METHOD] screen is displayed.

3) Press as to select the projection method.

[FRONT/FLOOR]

[FRONT/CEILING]

[REAR/FLOOR]

[REAR/CEILING]

When installing the projector on the desk, etc., in front of the screen

When installing the projector in front of the screen using the Ceiling Mount Bracket (optional)

When installing the projector on the desk, etc., behind the screen (with a translucent screen)

When installing the projector behind the screen (with a translucent screen) using the Ceiling Mount

Bracket (optional)

4)

Press the <ENTER> button.

Note

f

When [FRONT/CEILING] or [REAR/CEILING] is set, the operation direction using as on the control panel is reversed.

88 - ENGLISH

Chapter 4

Settings — [PROJECTOR SETUP] menu

[ECO MANAGEMENT]

This function optimizes lamp power according to the operating status to reduce power consumption.

Setting [LAMP POWER]

Switch the brightness of the lamp according to the operating environment of the projector or the purpose.

1) Press as to select [ECO MANAGEMENT].

2) Press the <ENTER> button.

f The [ECO MANAGEMENT] screen is displayed.

3) Press as to select [LAMP POWER].

4) Press qw to switch the item.

[AUTO]

[NORMAL]

[ECO1]

[ECO2]

Power is automatically adjusted so that optimum luminance is obtained according to the brightness of input signals.

Select when high luminance is required.

Power is lowered by about 25 % on average compared to the [NORMAL] setting.

Power is lowered by about 30 % on average compared to the [NORMAL] setting.

Note

f f

When [ECO1] and [ECO2] are set, you can reduce power consumption and operation noise, and extend the life of the lamp.

When [LAMP POWER] is set to [ECO1] or [ECO2], [AMBIENT LIGHT DETECTION] cannot be set.

f

When [PICTURE MODE] (x page 64) is set to [DICOM SIM.], [LAMP POWER] cannot be set. [LAMP POWER] is ixed to [NORMAL].

Setting [AUTO POWER SAVE]

Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [SHUTTER DETECTION].

1) Press as to select [ECO MANAGEMENT].

2) Press the <ENTER> button.

f The [ECO MANAGEMENT] screen is displayed.

3) Press as to select [AUTO POWER SAVE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Enables the energy conservation setting.

Disables the energy conservation setting.

5) Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION].

[AMBIENT LIGHT

DETECTION]

[SIGNAL DETECTION]

[SHUTTER DETECTION]

Adjusts the power of the lamp according to the brightness of the installation location.

Lowers the power of the lamp when there is no signal.

Lowers the power of the lamp when the shutter is closed.

6) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Enables the setting.

Disables the setting.

Note

f

When [AUTO POWER SAVE] is set to [OFF], settings of [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], [SHUTTER DETECTION] are unavailable.

f

When objects, etc. are placed around the luminance sensor on the top of the projector, [AMBIENT LIGHT DETECTION] may not function properly.

ENGLISH - 89

Chapter 4

Settings — [PROJECTOR SETUP] menu

Setting [NO SIGNAL SHUT-OFF]

A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set.

1) Press as to select [ECO MANAGEMENT].

2) Press the <ENTER> button.

f The [ECO MANAGEMENT] screen is displayed.

3) Press as to select [NO SIGNAL SHUT-OFF].

4) Press qw to switch the item. f The items will switch each time you press the button.

[DISABLE]

[10MIN.] - [90MIN.]

Disables the No signal shut-off function.

Allows you to set in ten minutes intervals.

Setting [STANDBY MODE]

Set the power consumption during the standby.

1) Press as to select [ECO MANAGEMENT].

2) Press the <ENTER> button.

f The [ECO MANAGEMENT] screen is displayed.

3) Press as to select [STANDBY MODE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ECO]

[NORMAL]

Use this setting to reduce power consumption during standby.

Use this setting to use the network function during standby.

Note

f

When [ECO] is set, the network function and some RS-232C commands become inoperable during standby. When [NORMAL] is set, the network function becomes operable during standby.

f

When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with when [NORMAL] is set.

f

The [STANDBY MODE] settings are not reset to their factory defaults when [ALL USER DATA] in [PROJECTOR SETUP] menu →

[INITIALIZE] (x page 98) is executed.

[SCHEDULE]

Set the command execution schedule for each day of the week.

Enabling/disabling the schedule function

1) Press as to select [SCHEDULE].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Disables the schedule function.

Enables the schedule function. Refer to “How to assign a program” (x page 90) or “How to set a program” (x page 91) for how to set the schedule.

Note

f

When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed.

Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].

How to assign a program

1) Press as to select [SCHEDULE].

90 - ENGLISH

Chapter 4

Settings — [PROJECTOR SETUP] menu

2) Press qw to select [ON], and press the <ENTER> button. f The [SCHEDULE] screen is displayed.

3) Select and assign program to each day of week.

f Press as to select the day of week, and press qw to select a program number.

f

You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.

How to set a program

Set up to 16 commands to each program.

1) Press as to select [SCHEDULE].

2) Press qw to select [ON], and press the <ENTER> button. f The [SCHEDULE] screen is displayed.

3) Press as to select [PROGRAM EDIT].

4) Press qw

to select a program number, and press the <ENTER> button.

5) Press as to select a command number, and press the <ENTER> button. f You can change the page using qw.

6) Press asqw

to select [TIME], and press the <ENTER> button.

7) Press qw

to select “hour” or “minute”, and press as or the number (<0> - <9>) buttons to set a

time, and then press the <ENTER> button.

8) Press asqw to select [COMMAND].

9) Press the <ENTER> button.

f The [COMMAND] detailed screen is displayed.

10) Press as to select a [COMMAND]. f

For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.

f

When [INPUT] is selected, press the <ENTER> button, and then press asqw to select the input to set.

[COMMAND]

[POWER ON]

[STANDBY]

[SHUTTER]

[INPUT]

[LAMP POWER]

[P IN P]

[IN STANDBY MODE(AUDIO)]

[VOLUME]

Detailed settings of

[COMMAND]

[OPEN]

[CLOSE]

[VIDEO]

[RGB1]

[RGB2]

[DVI-D]

[HDMI]

[DIGITAL LINK]

[DisplayPort]

[INPUT1] - [INPUT10]

[AUTO]

[NORMAL]

[ECO1]

[ECO2]

[OFF]

[USER1]

[USER2]

[USER3]

[OFF]

[ON]

[0] - [63]

*1

Switches on the projector.

Enters standby.

Description

Opens the shutter.

Closes the shutter.

Switches the input to VIDEO.

Switches the input to RGB1.

Switches the input to RGB2.

Switches the input to DVI-D.

Switches the input to HDMI.

Switches the input to DIGITAL LINK.

Switches the input to DisplayPort.

Switches the input to DIGITAL LINK, and switch the input of the

Panasonic twisted-pair-cable transmitter to the speciied input.

Sets [LAMP POWER] to [AUTO].

Sets [LAMP POWER] to [NORMAL].

Sets [LAMP POWER] to [ECO1].

Sets [LAMP POWER] to [ECO2].

P IN P function is not used.

Lays out the sub-screen with the settings of [USER1].

Lays out the sub-screen with the settings of [USER2].

Lays out the sub-screen with the settings of [USER3].

Audio output is stopped during standby.

Audio is output during standby.

Sets the volume.

*1

When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is relected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not relected is selected, it is disabled.

ENGLISH - 91

Chapter 4

Settings — [PROJECTOR SETUP] menu

11)

Press the <ENTER> button.

f

The command is ixed and n is displayed at the left of the selected command.

f

After the command is ixed, press the <MENU> button to close the detailed setting screen.

12) Press asqw to select [STORE], and press the <ENTER> button.

Note

f

If you attempt to register the setting that would make the lamp turn on for a short time during the same day, an error message will be displayed on the screen. Set the time and command again. If you set a schedule that would make the lamp turn on for a short time across two or more days, an error message will not be displayed. When executing a command for turning the projector on, provide an interval of at least four minutes between the [STANDBY] and the [POWER ON] command. When executing a command for setting the projector to standby, provide an interval of at least 31 minutes between the [POWER ON] command and the [STANDBY] command.

f

To delete a command already set, press the <DEFAULT> button on the remote control at the screen in Step 5), or select [DELETE] at the screen in Step 6) and press the <ENTER> button.

f

If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command number.

f

The operating time will be the local time. (x page 97) f

If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in

[SCHEDULE] is executed, the command set with this function may not be executed.

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.

1) Press as to select [STARTUP INPUT SELECT].

2) Press the <ENTER> button.

f The [STARTUP INPUT SELECT] screen is displayed.

3) Press asqw to select an input. f The items will switch each time you press the button.

[LAST USED]

[VIDEO]

[RGB1]

[RGB2]

[DVI-D]

[HDMI]

[DIGITAL LINK]

[DisplayPort]

[INPUT1] - [INPUT10]

*1

Keeps the input selected last.

Sets the input to VIDEO.

Sets the input to RGB1.

Sets the input to RGB2.

Sets the input to DVI-D.

Sets the input to HDMI.

Sets the input to DIGITAL LINK.

Sets input to DisplayPort.

Sets the input to DIGITAL LINK, and switch the input of Panasonic twisted-pair-cable transmitter to the speciied input.

*1

When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is relected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not relected is selected, it is disabled.

4)

Press the <ENTER> button.

[RS-232C]

Set the communication conditions of the <SERIAL IN> terminal.

Setting the communication condition of the <SERIAL IN> terminal

1) Press as

to select [RS-232C].

2) Press the <ENTER> button.

f The

[RS-232C] screen is displayed.

3) Press as to select [INPUT SELECT].

4) Press qw to switch the item.

[PROJECTOR]

[DIGITAL INTERFACE BOX]

Use the <SERIAL IN> terminal of the projector to execute RS-232C communication.

Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET-YFB100G) and the <DIGITAL LINK/LAN> terminal.

5) Press as to select [BAUDRATE].

92 - ENGLISH

Chapter 4

Settings — [PROJECTOR SETUP] menu

6) Press qw to switch the item. f The items will switch each time you press the button.

[9600]

[19200]

[38400]

Select the proper speed.

7) Press as to select [PARITY].

8) Press qw to switch the item. f The items will switch each time you press the button.

[NONE]

[EVEN]

[ODD]

Select the parity condition.

Setting the control commands of an existing projector

When controlling the projector on a computer, set use of control commands on a previously purchased Panasonic projector. This allows the control software for an existing Panasonic projector to be inherited and used.

1) Press as

to select [RS-232C].

2) Press the <ENTER> button.

f The

[RS-232C] screen is displayed.

3) Press as to select [EMULATE].

4)

Press the <ENTER> button.

5) Press as to select an item.

[DEFAULT]

[D3500]

[D4000]

[D/W5k SERIES]

[D/W/Z6k SERIES]

[L730 SERIES]

[L780 SERIES]

[L735 SERIES]

[L785 SERIES]

[F/W SERIES]

[LZ370]

[LB/W SERIES]

[VX500 SERIES]

[EZ570 SERIES]

[VW431D]

EZ770 series, EW730 series, EX800 series, RZ475 series, RZ470 series, RW430 series, RZ370 series, RW330 series

D3500 series

D4000 series

D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series

DZ770 series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730 series, DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series,

DZ570 series, DW530 series, DX500 series

L730 series, L720 series, L520 series

L780 series, L750 series

L735 series

L785 series

FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series

LZ370 series

LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78 series, LB75 series

VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX501U, VX405KEA,

VX45KEA, VX500 series, VW330 series, VX400NT series, VX400 series, VX41 series

EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series

VW431D series

6)

Press the <ENTER> button.

7)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

f

When [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication using that serial terminal is available only when the corresponding device (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN> terminal.

f

When transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set to “OFF” to avoid cutting off communication.

f

When [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication speed is ixed to 9 600 bps.

ENGLISH - 93

Chapter 4

Settings — [PROJECTOR SETUP] menu

[REMOTE2 MODE]

Set the <REMOTE 2 IN> terminal.

1) Press as

to select [REMOTE2 MODE].

2) Press qw to switch the item. f The items will switch each time you press the button.

[DEFAULT]

[USER]

[F/W SERIES]

The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the projector.

Used to change the setting of the <REMOTE 2 IN> terminal.

The setting of the <REMOTE 2 IN> terminal is used for the F/W series compatibility.

f

When [USER] is selected, proceed to Step 3).

3)

Press the <ENTER> button.

4) Press as

to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the functions of the <FUNCTION> button on the remote control.

1) Press as to select [FUNCTION BUTTON].

2) Press the <ENTER> button.

f The [FUNCTION BUTTON] screen is displayed.

3) Press as to select a function.

[DISABLE]

[SUB MEMORY]

[SYSTEM SELECTOR]

[DAYLIGHT VIEW]

[TEST PATTERN]

Disables the <FUNCTION> button.

Displays the sub memory list. (x page 105)

Switches the [SYSTEM SELECTOR] setting. (x page 68)

Switches the [DAYLIGHT VIEW] setting. (x page 68)

Displays the test pattern built-in to the projector. (x page 102)

4)

Press the <ENTER> button.

[AUDIO SETTING]

Set audio functions in detail.

Adjusting the volume

1) Press as to select [AUDIO SETTING].

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select [VOLUME].

4) Press qw to adjust the level.

Operation

Press w.

Press q.

Increases the volume.

Decreases the volume.

Adjusting the left to right audio balance

1) Press as to select [AUDIO SETTING].

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select [BALANCE].

Adjustment Range of adjustment

0 - 63

94 - ENGLISH

Chapter 4

Settings — [PROJECTOR SETUP] menu

4) Press qw to adjust the level.

Operation

Press w.

Press q.

Adjustment

Increases the volume on the right.

Increases the volume on the left.

Setting audio output of the built-in speaker

1) Press as to select [AUDIO SETTING].

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select [BUILT-IN SP].

4) Press qw to switch the item. f The items will switch each time you press the button.

[ON]

[OFF]

Audio is output from the built-in speaker.

Audio is not output from the built-in speaker.

Range of adjustment

L16 - R16

Note

f

Audio is output from the built-in speaker even if the cable is connected to the <VARIABLE AUDIO OUT> terminal. To output audio from external audio devices connected to the <VARIABLE AUDIO OUT> terminal and not from the built-in speaker, set [BUILT-IN SP] to [OFF].

Setting audio output in the standby mode

1) Press as to select [AUDIO SETTING].

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select [IN STANDBY MODE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Audio is not output during standby.

Audio is output during standby.

Note

f

When [STANDBY MODE] (x page 90) in [PROJECTOR SETUP] menu → [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.

Setting to mute mode

1) Press as to select [AUDIO SETTING].

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select [MUTE].

4) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Audio is not output.

Audio is output.

Setting audio input from a connected device

1) Press as to select [AUDIO SETTING].

ENGLISH - 95

Chapter 4

Settings — [PROJECTOR SETUP] menu

2) Press the <ENTER> button.

f The [AUDIO SETTING] screen is displayed.

3) Press as to select the audio input.

4) Press qw to switch the item. f The items will switch each time you press the button.

[AUDIO IN 1]

[AUDIO IN 2]

[AUDIO IN 3]

Audio connected to the <AUDIO IN 1> terminal is output at projection of images from a preset input terminal.

Audio connected to the <AUDIO IN 2> terminal is output at projection of images from a preset input terminal.

Audio connected to the <AUDIO IN 3> terminal is output at projection of images from a preset input terminal.

[HDMI AUDIO IN] *1

HDMI audio is output.

[DIGITAL LINK AUDIO IN]

*2

DIGITAL LINK audio is output.

[DisplayPort AUDIO IN]

*3

DisplayPort audio is output.

*1

Only when the input terminal is HDMI

*2

Only when the input terminal is DIGITAL LINK

*3

Only when the input terminal is DisplayPort

[STATUS]

Display the status of the projector.

1) Press as to select [STATUS].

2) Press the <ENTER> button.

f The [STATUS] screen is displayed.

3) Press qw to switch the pages. f The page will change each time you press the button.

[INPUT]

[SIGNAL NAME]

[SIGNAL FREQUENCY]

[PROJECTOR RUNTIME]

[LAMP : ECO] *1

[LAMP : NORMAL]

[LAMP : TOTAL]

*1

Displays the input terminal currently selected.

Displays the input signal name.

Displays the frequency of the input signal.

Displays the operation times of the projector.

Converts the total lamp runtime when [LAMP POWER] is set to [ECO1] and [ECO2] into the runtime when set to [ECO2], and displays the converted runtime.

Displays the lamp runtime when [LAMP POWER] is set to [AUTO] and [NORMAL] by actual time.

Converts the cumulative lamp runtime into the runtime when set to [NORMAL], and displays the converted runtime.

[INTAKE AIR TEMP.]

[AROUND LAMP TEMP.]

Displays the status of the air intake temperature of the projector.

Displays the status of the temperature around the lamp of the projector.

[PROJECTOR TYPE]

Displays the type of the projector.

[SERIAL NUMBER]

Displays the serial number of the projector.

[LAMP UNIT MODEL NO.]

Displays the model no. of the lamp unit.

[LAMP SERIAL NUMBER]

Displays the serial number of the lamp.

[MAIN VERSION]

Displays the main version of the irmware of the projector.

[SUB VERSION]

[NETWORK VERSION]

[EMULATE]

[ON COUNT]

Displays the sub version of the irmware of the projector.

Display the network version of the projector.

Displays the [EMULATE] settings.

[POWER ON TIMES]

[LAMP ON]

[SHUTTER]

Displays the number of times the power is turned on.

Displays the number of times the lamp is turned on.

Displays the number of times the shutter is closed.

[NUMBER OF REGISTERED

SIGNAL]

[REMOTE2 STATUS]

Displays the number of registered signals.

Displays the control status of the REMOTE2.

96 - ENGLISH

Chapter 4

Settings — [PROJECTOR SETUP] menu

[SIGNAL INFORMATION]

[MEMORY NO.]

[INPUT]

[SIGNAL NAME]

[SIGNAL FREQUENCY]

[SYNC.STATE]

[V.SYNC WIDTH]

[SCAN TYPE]

[TOTAL DOTS]

[DISPLAY DOTS]

[TOTAL LINES]

[DISPLAY LINES]

[SAMPLING]

[SIGNAL LEVEL]

Displays the memory number of the input signal.

Displays the input terminal currently selected.

Displays the input signal name.

Displays the frequency of the input signal.

Displays the synch polarity of the input signal.

Displays the vertical sync signal pulse width of the input signal.

Displays the scan type of the input signal.

Displays the total dot count of the input signal.

Displays the number of input signal display dots.

Displays the total line count of the input signal.

Displays the number of input signal display lines.

Displays the sampling information of the input signal.

Displays the signal level of the input signal.

*1 The lamp runtime displayed is calculated internally by the following conversions.

Lamp runtime displayed in

[LAMP : ECO]

Lamp runtime displayed in

[LAMP : TOTAL]

Formula for lamp replacement time (rough estimate)

(A x 9 + B x 8) ÷ 8 f A

: Runtime when [LAMP POWER] is set to [ECO1] f B

: Runtime when [LAMP POWER] is set to [ECO2]

(C x 3 + D x 2) ÷ 3 f C

: Actual runtime when [LAMP POWER] is set to [AUTO] and [NORMAL] ( = Runtime displayed in [LAMP : NORMAL]) f D

: Actual runtime when [LAMP POWER] is set to [ECO1] and [ECO2] ( = Runtime displayed in

[LAMP : ECO])

Note

f

The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the [STATUS] screen.

f

Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.

Setting the time zone

1) Press as to select [DATE AND TIME].

2) Press the <ENTER> button.

f The [DATE AND TIME] screen is displayed.

3) Press as

to select [TIME ZONE].

4) Press qw

to switch [TIME ZONE].

Setting the date and time manually

1) Press as to select [DATE AND TIME].

2) Press the <ENTER> button.

f The [DATE AND TIME] screen is displayed.

3) Press as to select [ADJUST CLOCK].

4)

Press the <ENTER> button.

f The [ADJUST CLOCK] screen is displayed.

5) Press as to select an item, and press qw to set the local date and time.

6) Press as

to select [APPLY], and press the <ENTER> button.

f The setting of the date and time will be completed.

Setting the date and time automatically

1) Press as to select [DATE AND TIME].

ENGLISH - 97

Chapter 4

Settings — [PROJECTOR SETUP] menu

2) Press the <ENTER> button.

f The [DATE AND TIME] screen is displayed.

3) Press as to select [ADJUST CLOCK].

4)

Press the <ENTER> button.

f The [ADJUST CLOCK] screen is displayed.

5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].

6) Press as

to select [APPLY], and press the <ENTER> button.

f The setting of the date and time will be completed.

Note

f To set the date and time automatically, the projector must be connected to the network.

f

If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned

[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].

f

Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 119) for details.

[SAVE ALL USER DATA]

Save the various setting values as a backup in the built-in memory of the projector.

1) Press as to select [SAVE ALL USER DATA].

2) Press the <ENTER> button.

f The [SECURITY PASSWORD] screen is displayed.

3)

Enter a security password and press the <ENTER> button.

4)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. f

[PROGRESS] is displayed while saving data.

Note

f

Data set from the computer application is not included in [ALL USER DATA].

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.

1) Press as to select [LOAD ALL USER DATA].

2) Press the <ENTER> button.

f The [SECURITY PASSWORD] screen is displayed.

3)

Enter a security password and press the <ENTER> button.

4)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

f

The projector will go into the standby mode to relect the setting values when [LOAD ALL USER DATA] is executed.

f

Data registered from a computer is not included in [ALL USER DATA].

[INITIALIZE]

Return various setting values to their factory default settings.

1) Press as

to select [INITIALIZE].

2) Press the <ENTER> button.

f The [SECURITY PASSWORD] screen is displayed.

3)

Enter a security password and press the <ENTER> button.

f The

[INITIALIZE] screen is displayed.

4) Press as to select an item to initialize.

[ALL USER DATA]

Returns all setting items including [REGISTERED SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER LOGO] to the factory default settings.

The projector will go into the standby status to relect the setting values.

98 - ENGLISH

[REGISTERED SIGNAL]

[NETWORK/E-MAIL]

[LOGO IMAGE]

Chapter 4

Settings — [PROJECTOR SETUP] menu

Deletes all the setting values saved for each input signal.

To delete only a part of a registered signal, perform the procedure described in “Deleting the registered signal” (x page 104).

Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.

Deletes the image registered in [USER LOGO].

5) Press the <ENTER> button.

6)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[SERVICE PASSWORD]

This function is used by a service person.

ENGLISH - 99

Chapter 4

Settings — [P IN P] menu

[P IN P] menu

On the menu screen, select [P IN P] from the main menu, and select an item from the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to set.

Using P IN P function

Locate a separate, small sub screen in the main screen to project two images simultaneously.

1) Press as to select [P IN P MODE].

2) Press the <ENTER> button.

f The [P IN P MODE] screen is displayed.

3) Press as to select a function.

P IN P function is not used.

[OFF]

[USER1]

[USER2]

[USER3]

The items set in “Setting P IN P function” (x page 100) are used in P IN P function.

4)

Press the <ENTER> button.

Setting P IN P function

P IN P function settings can be saved to [USER1], [USER2], and [USER3].

1) Press as to select [P IN P MODE].

2) Press the <ENTER> button.

f The [P IN P MODE] screen is displayed.

3) Press as

to select the desired mode from [USER1], [USER2], and [USER3], and press the <ENTER> button.

4)

Press the <MENU> button.

5) Press as to select [MAIN WINDOW] or [SUB WINDOW], and press the <ENTER> button.

6) Press as

to select the input terminal to be displayed in the window, and press the <ENTER> button.

7)

Press the <MENU> button.

8) Press as to select an item.

[SIZE]

[POSITION]

[CLOCK PHASE]

Set the window display size between 10 % and 100 %.

Set the display position of the window within the screen.

When the sub window is input from the <RGB 1 IN> terminal or the <RGB 2 IN> terminal and a lickering image or smeared outline appears, set between 0 and +31.

9) If [SIZE] is selected in Step 8), press the <ENTER> button.

f The sub-menu is displayed.

10) Press as to select an item.

11) Press qw

to make adjustment, and press the <MENU> button.

12) If [POSITION] is selected in Step 8), press the <ENTER> button.

13) Press asqw

to adjust the position, and press the <MENU> button.

100 - ENGLISH

Chapter 4

Settings — [P IN P] menu

14)

If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.

15) Press as to select [FRAME LOCK].

16) Press qw to switch the item.

[MAIN WINDOW]

[SUB WINDOW]

Set frame lock to the input signal set in the main window.

Set frame lock to the input signal set in the sub window.

17) Press as to select [TYPE].

18) Press qw to switch the item.

[MAIN WINDOW]

[SUB WINDOW]

The main window has display priority.

The sub window has display priority.

Note

f

The P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display combination list” (x page 146) for details.

f

The main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR

TEMPERATURE].

f

On the normal screen (when no menu is displayed), press as to switch the size and position of the main window and sub window while P

IN P is operating.

f

If the signals from the <RGB 1 IN> or <RGB 2 IN> terminal are input to either the main window or the sub window, and those input signals are analog RGB or YC

B

C

R

/YP

B

P

R

signals, the signals are output from the <MONITOR OUT> terminal. If input combination of the main window and sub window is RGB1 and RGB2, the signals of the main window take priority for output.

ENGLISH - 101

Chapter 4

Settings — [TEST PATTERN] menu

[TEST PATTERN] menu

On the menu screen, select [TEST PATTERN] from the main menu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f Press qw to switch.

[TEST PATTERN]

Display the test pattern built-in to the projector.

Settings of position, size, and other factors will not be relected in test patterns. Make sure to display the input signal before performing various adjustments.

1) Press qw to switch the [TEST PATTERN] item. f The items will switch each time you press the button.

Menu screen + Color bar

(vertical)

Menu screen + Color bar

(horizontal)

Menu screen + 16 gradations

(vertical 1)

Menu screen + 16 gradations

(vertical 2)

Menu screen + 16 gradations

(horizontal 1)

Menu screen + 16 gradations

(horizontal 2)

Menu screen + Cross hatch

Menu screen + Aspect frame

Menu screen + All white

Menu screen + All black

Displays test patterns with the menu screen. Select a test pattern so that it is easy to make various adjustments.

Note

f

Press the <ON SCREEN> button on the remote control while the test pattern is displayed to hide the menu screen.

102 - ENGLISH

Chapter 4

Settings — [SIGNAL LIST] menu

[SIGNAL LIST] menu

On the menu screen, select [SIGNAL LIST] from the main menu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.

r Registered signal details

Memory number: A1 (1-2)

Sub memory number

When the address number (A1, A2, ... L7, L8) signal is registered

f

A name can be set for each sub memory (x page 105).

Registering new signals

After a new signal is input and the <MENU> button on the remote control or the control panel is pressed, the registration is completed and the

[MAIN MENU] screen is displayed.

Note

f

Up to 96 signals, including sub memories, can be registered to the projector.

f

There are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and the signal is registered to the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.

f The names to be registered are automatically determined by the input signals and memory numbers.

f

If a menu is being displayed, the new signals will be registered at the instant they are input.

Renaming the registered signal

Registered signals can be renamed.

1) Press asqw

to select the signal of which name is to be changed.

2) Press the <ENTER> button.

f The [REGISTERED SIGNAL STATUS] screen is displayed.

f The memory number, input terminal, input signal name, frequency, synch polarity, etc., are displayed.

f

Press the <MENU> button to return to the [SIGNAL LIST] screen.

3)

Press the <ENTER> button.

f The [REGISTERED SIGNAL SETUP] screen is displayed.

4) Press as to select [SIGNAL NAME CHANGE].

5) Press the <ENTER> button.

f The [SIGNAL NAME CHANGE] screen is displayed.

6) Press asqw

to select the text, and press the <ENTER> button to enter the text.

7)

After the name is changed, press asqw to select [OK], and press the <ENTER> button. f The registration is completed and the [REGISTERED SIGNAL SETUP] screen returns.

f When pressing asqw

to select [CANCEL] and pressing the <ENTER> button, the changed signal name will not be registered and an automatically registered signal name will be used.

Expanding signal lock-in range

1) Press asqw to select the signal to set.

2) Press the <ENTER> button.

f The [REGISTERED SIGNAL STATUS] screen is displayed.

ENGLISH - 103

Chapter 4

Settings — [SIGNAL LIST] menu

3)

Press the <ENTER> button.

f The [REGISTERED SIGNAL SETUP] screen is displayed.

4) Press as to select [LOCK-IN RANGE].

5) Press qw to switch the item. f The items will switch each time you press the button.

[NARROW]

[WIDE]

Select in most cases.

Widens the lock-in range.

Note

f f

Switch the range that determines that a signal to be input is the same signal that is already registered.

To prioritize the determination that it is the same signal that is already registered, set to the [WIDE] setting.

f

Use in cases such as when the synchronizing frequency of a signal to be input has changed slightly, or multiple signal lists are registered.

f

Can only be used when a signal is input from the <RGB 1 IN> terminal, <RGB 2 IN> terminal, <DVI-D IN> terminal, <HDMI IN> terminal,

<DIGITAL LINK/LAN> terminal, and <DisplayPort IN> terminal.

f

When [WIDE] is set, the image may appear distorted because a signal is determined to be the same signal even if a synchronizing frequency changes slightly.

f

When a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority.

Example: a signal to be input that corresponds to memory numbers A2, A4, and B1 will be determined to be B1.

f When a registration signal is deleted, the settings are also deleted.

f

In an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the setting is set to [WIDE].

Protecting the registered signal

1) Press asqw to select the signal to protect.

2) Press the <ENTER> button.

f The [REGISTERED SIGNAL STATUS] screen is displayed.

3)

Press the <ENTER> button.

f The [REGISTERED SIGNAL SETUP] screen is displayed.

4) Press as to select [LOCK].

5) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

The signal is not protected.

The signal is protected.

Note

f

When [LOCK] is set to [ON], signal deletion, image adjustment, and automatic setup are not available. To perform these operations, set

[LOCK] to [OFF].

f

A signal can be registered to the sub memory even if it is protected.

f

Even a protected signal will be deleted if [INITIALIZE] is executed.

Deleting the registered signal

Registered signals can be deleted.

1) Press asqw to select the signal to delete.

2) Press the <DEFAULT> button on the remote control.

f The [REGISTERED SIGNAL DELETE] screen is displayed.

f

To cancel the deletion, press the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.

3)

Press the <ENTER> button.

f The selected signal will be deleted.

Note

f

A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.

104 - ENGLISH

Chapter 4

Settings — [SIGNAL LIST] menu

Sub memory

The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source.

Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such as the screen aspect ratio and data adjusted in the [PICTURE] item ([CONTRAST], [BRIGHTNESS], etc.).

Registering to the sub memory

1) Press as on the normal screen (when the menu is not displayed). f

The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3).

f

A list of sub memories registered to the signal currently input is displayed.

f

By selecting [SUB MEMORY] in the [PROJECTOR SETUP] menu

→ [FUNCTION BUTTON], the <FUNCTION> button on the remote control can be used instead of qw.

2) Press asqw to select the sub memory number to register in [SUB MEMORY LIST].

3)

Press the <ENTER> button.

f The [SIGNAL NAME CHANGE] screen is displayed.

4) Press asqw

to select [OK], and press the <ENTER> button.

f

To rename the registered signal, follow the procedure in Steps 6) and 7) in “Renaming the registered signal” (x page 103).

Switching to the sub memory

1) Press as on the normal screen (when the menu is not displayed). f

A list of sub memories registered to the signal currently input is displayed.

2) Press asqw to select the signal to switch in [SUB MEMORY LIST].

3)

Press the <ENTER> button.

f

This switches to the signal selected in Step 2).

Deleting the sub memory

1) Press as on the normal screen (when the menu is not displayed). f The [SUB MEMORY LIST] screen is displayed.

2) Press asqw to select the sub memory to delete, and press the <DEFAULT> button on the remote

control.

f The [REGISTERED SIGNAL DELETE] screen is displayed.

f

To cancel the deletion, press the <MENU> button to return to the [SUB MEMORY LIST] screen.

3)

Press the <ENTER> button.

f The selected sub memory will be deleted.

ENGLISH - 105

Chapter 4

Settings — [SECURITY] menu

[SECURITY] menu

On the menu screen, select [SECURITY] from the main menu, and select an item from the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

When the projector is used for the irst time

Initial password: Press awsqawsq in order, and press the <ENTER> button.

f

After selecting the item, press asqw to set.

Attention

f

When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and then continue operations of the [SECURITY] menu.

f

When the password has been changed previously, enter the changed password, and press the <ENTER> button.

Note

f The entered password is displayed with*marks on the screen.

f

An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be restricted to the power <v

/b> button on the control panel and the power standby <v> button, <SHUTTER> button, and <LENS> (<FOCUS>,

<ZOOM>, and <SHIFT>) buttons on the remote control.

1) Press as to select [SECURITY PASSWORD].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Disables the security password entry.

Enables the security password entry.

Note

f

In the factory default setting of after [ALL USER DATA] in [INITIALIZE] (x page 98) is executed, the [SECURITY PASSWORD] setting is set to [OFF].

f

Change the password periodically that is hard to guess.

f

The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.

[SECURITY PASSWORD CHANGE]

Change the security password.

1) Press as to select [SECURITY PASSWORD CHANGE].

2) Press the <ENTER> button.

f The [SECURITY PASSWORD CHANGE] screen is displayed.

3) Press asqw

and the number (<0> - <9>) buttons to set the password.

f

Up to eight button operations can be set.

4)

Press the <ENTER> button.

5) Re-enter the password for the confirmation.

6)

Press the <ENTER> button.

Note

f The entered password is displayed with*marks on the screen.

106 - ENGLISH

Chapter 4

Settings — [SECURITY] menu

[DISPLAY SETTING]

Overlap the security message (text or image) over the projecting image.

1) Press as to select [DISPLAY SETTING].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[TEXT]

[USER LOGO]

The text display is disabled.

The text display is enabled.

Displays the image registered by the user.

Note

f

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[TEXT CHANGE]

Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].

1) Press as to select [TEXT CHANGE].

2) Press the <ENTER> button.

f The [TEXT CHANGE] screen is displayed.

3) Press asqw

to select the text, and press the <ENTER> button to enter the text.

4) Press asqw

to select [OK], and press the <ENTER> button.

f

The text is changed.

[MENU LOCK]

Display the menu by the <MENU> button and set whether or not to enable menu operations.

1) Press as to select [MENU LOCK].

2) Press qw to switch the item. f The items will switch each time you press the button.

[OFF]

[ON]

Unlocks menu operations.

Locks menu operations.

Note

f

When the entered password is incorrect after setting [MENU LOCK] to [ON], the <MENU> button cannot be operated.

f

[MENU LOCK] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed.

f The unlock state is held until the projector enters the standby mode.

[MENU LOCK PASSWORD]

The menu lock password can be changed.

1) Press as to select [MENU LOCK PASSWORD].

2) Press the <ENTER> button.

f The [MENU LOCK PASSWORD] screen is displayed.

3) Press asqw

to select the text, and press the <ENTER> button to enter the text.

4) Press asqw

to select [OK], and press the <ENTER> button.

f

To cancel, select [CANCEL].

Attention

f

The initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed.

f

Change the password periodically that is hard to guess.

ENGLISH - 107

Chapter 4

Settings — [SECURITY] menu

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.

1) Press as to select [CONTROL DEVICE SETUP].

2) Press the <ENTER> button.

f The [CONTROL DEVICE SETUP] screen is displayed.

3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

[CONTROL PANEL]

[REMOTE CONTROL]

You can set the limitation on the control from the control panel.

You can set the limitation on the control from the remote control.

4)

Press the <ENTER> button.

f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.

5) Press as to select [ENABLE] or [DISABLE]. f You can set the operation restriction from the control panel or the remote control.

[ENABLE]

[DISABLE]

Enables all button operations.

Disables all button operations.

6)

Press the <ENTER> button.

f

The conirmation screen is displayed.

7) Press qw

to select [OK], and press the <ENTER> button.

Note

f

When a button operation is performed on the device set to [DISABLE], the [MENU LOCK PASSWORD] screen is displayed.

Enter the menu lock password.

f The [MENU LOCK PASSWORD]

screen will disappear when there is no operation for approx. 10 seconds.

f

If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot enter standby).

f

When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main menu.

f

Even when you set button operations on the remote control to be disabled, operations of the <ID ALL> and <ID SET> buttons on the remote control are enabled.

108 - ENGLISH

Chapter 4

Settings — [NETWORK] menu

[NETWORK] menu

On the menu screen, select [NETWORK] from the main menu, and select an item from the submenu.

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f

After selecting the item, press asqw to set.

[DIGITAL LINK MODE]

Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.

1) Press as to select [DIGITAL LINK MODE].

2) Press qw to switch the item. f The items will switch each time you press the button.

[AUTO]

[DIGITAL LINK]

[ETHERNET]

Switches the communication method automatically to DIGITAL LINK or Ethernet.

Fixes the communication method to DIGITAL LINK.

Fixes the communication method to Ethernet.

Possible communication modes

Setting

[AUTO]

[DIGITAL LINK]

[ETHERNET]

For DIGITAL LINK

For Ethernet

l

: Communication possible

―: Communication not possible

[DIGITAL LINK SETUP]

Set the communication method of DIGITAL LINK or Ethernet.

Image transmission

l

― l

Communication possible

Ethernet

l l l l

When the projector is connected directly via Ethernet

RS-232C

l

― l

1) Press as to select [DIGITAL LINK SETUP].

2) Press the <ENTER> button.

f The [DIGITAL LINK SETUP] screen is displayed.

3) Press as to select [DUPLEX(ETHERNET)].

4) Press qw to switch the communication method. f The items will switch each time you press the button.

[AUTONEGOTIATION]

[100BaseTX-Full]

[100BaseTX-Half]

The communication method is set automatically.

Full-duplex communication method is set.

Half-duplex communication method is set.

5) Press as to select [STORE].

6)

Press the <ENTER> button.

ENGLISH - 109

Chapter 4

Settings — [NETWORK] menu

7)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

f

The projector does not support 10BaseT Full/Half.

When the projector is connected to a twisted-pair-cable transmitter

1) Press as to select [DIGITAL LINK SETUP].

2) Press the <ENTER> button.

f The [DIGITAL LINK SETUP] screen is displayed.

3) Press as to select [DUPLEX(DIGITAL LINK)].

4) Press qw to switch the communication method. f The items will switch each time you press the button.

[100BaseTX-Full]

[100BaseTX-Half]

[AUTONEGOTIATION]

Full-duplex communication method is set.

Half-duplex communication method is set.

The communication method is set automatically.

5) Press as to select [STORE].

6)

Press the <ENTER> button.

7)

When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[DIGITAL LINK STATUS]

Display DIGITAL LINK connection environment.

1) Press as to select [DIGITAL LINK STATUS].

2) Press the <ENTER> button.

f The [DIGITAL LINK STATUS] screen is displayed.

[LINK STATUS]

[HDCP STATUS]

[SIGNAL QUALITY]

Either [NO LINK], [DIGITAL LINK], or [ETHERNET] is displayed.

Either [NO SIGNAL], [OFF], or [ON] is displayed.

[SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to green, yellow, or red depending on that value.

Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter.

f

MAX/MIN: Maximum/minimum value of the amount of error.

f

Green (-12 dB or lower)

→ Normal signal quality level.

f

Yellow (-11 to -8 dB)

→ Warning level where there is the possibility of noise introduced on the screen.

f

Red (-7 dB or higher) → Abnormal level where synchronization may be interrupted or a signal may not be received.

[NETWORK SETUP]

Perform the initial setting of the network before using the network function.

1) Press as to select [NETWORK SETUP].

2) Press the <ENTER> button.

f The [NETWORK SETUP] screen is displayed.

3) Press as

to select an item, and change the settings according to the operation instructions of the menu.

[PROJECTOR NAME]

[DHCP]

[IP ADDRESS]

[SUBNET MASK]

[DEFAULT GATEWAY]

[STORE]

Change the setting when using a DHCP server.

Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not using a DHCP server.

Enter the IP address when not using a DHCP server.

Enter the subnet mask when not using a DHCP server.

Enter the default gateway address when not using a DHCP server.

Save the current network settings.

110 - ENGLISH

Chapter 4

Settings — [NETWORK] menu

4) Press as

to select [STORE], and press the <ENTER> button.

5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

f

When using a DHCP server, conirm that the DHCP server is running.

f

Consult your network administrator regarding the IP address, subnet mask, and default gateway.

[NETWORK CONTROL]

Set up the control method of the network.

1) Press as to select [NETWORK CONTROL].

2) Press the <ENTER> button.

f The [NETWORK CONTROL] screen is displayed.

3) Press as

to select an item, and press qw to change the setting.

[WEB CONTROL]

[PJLink CONTROL]

Set to [ON] to control with the web browser.

Set to [ON] to control with the PJLink protocol.

[COMMAND CONTROL]

[COMMAND PORT]

Set to [ON] to control with the <SERIAL IN> terminal control command format (x page 144). Refer to “Control commands via LAN” (x page 140).

Set the port number used for command control.

[Crestron Connected(TM)]

Set to [ON] to control with Crestron Connected

TM

of Crestron Electronics, Inc.

[AMX D.D.]

Set to [ON] to control with the controller of AMX Corporation.

Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX Corporation.

URL http://www.amx.com/

[EXTRON XTP]

[STORE]

Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the <DIGITAL LINK/LAN> terminal.

The [EXTRON XTP] setting must be set to [OFF] when connecting the optional Digital Interface Box

(Model No.: ET-YFB100G).

For details of the “XTP transmitter”, refer to the website of Extron Electronics.

URL http://www.extron.com/

Save the current network control settings.

4) Press as

to select [STORE], and press the <ENTER> button.

5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[NETWORK STATUS]

Display the status of the projector network.

1) Press as to select [NETWORK STATUS].

2) Press the <ENTER> button.

f The [NETWORK STATUS] screen is displayed.

[DIGITAL INTERFACE BOX]

When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the <DIGITAL LINK/LAN> terminal, the main menu of

ET-YFB100G is displayed. Refer to the Operating Instructions of ET-YFB100G for details.

Note

f

When [EXTRON XTP] is set to [ON], [DIGITAL INTERFACE BOX] cannot be selected.

f

The operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box. The projector does not have the “RETURN” button, but same operation is available with the <MENU> button.

Network connections

The projector has a network function, and the following operations are available from the computer using the web control.

f

Setting and adjustment of the projector f

Display of the projector status f

Sending of E-mail messages when there is a problem with the projector

The projector supports “Crestron Connected

TM

”, and the following application software of Crestron Electronics, Inc. can be used.

f

RoomView Express f

Fusion RV

ENGLISH - 111

Chapter 4

Settings — [NETWORK] menu f

RoomView Server Edition

Attention

f

When a LAN cable is directly connected to the projector, the network connection must be made indoors.

Note

f

“Crestron Connected

TM

” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems connected to a network using a computer.

f

For details of “Crestron Connected

TM

”, refer to the website of Crestron Electronics, Inc. (English only)

URL http://www.crestron.com

To download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only)

URL http://www.crestron.com/getroomview f

A LAN cable is required to use the network function.

r

Example of a normal network connection

Computer

Projector

LAN cable (straight) LAN cable (straight)

Hub f

A web browser is required to use this function. Conirm that the web browser can be used beforehand.

Compatible OS: Windows XP/Windows Vista/Windows 7/Windows 8, Mac OS X v10.4/v10.5/v10.6/v10.7/v10.8

Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0, Safari 4.0/5.0/6.0 (Mac OS) f

Communication with an E-mail server is required to use the E-mail function. Conirm that the E-mail can be used beforehand.

f

Use a LAN cable that is compatible with category 5 or higher.

f

Use a LAN cable of 100 m (328'1") or shorter.

Connecting to a twisted-pair-cable transmitter

The projector has a function that can receive Ethernet signals from a twisted-pair-cable transmitter together with video and audio signals via a

LAN cable. Connect a LAN cable to the <DIGITAL LINK/LAN> terminal of the projector. (x pages 20, 29)

r

Example of network connections via a twisted-pair-cable transmitter

Computer

Projector

LAN cable (straight)

Hub

LAN cable (straight) LAN cable (straight)

Twisted-pair-cable transmitter

112 - ENGLISH

Chapter 4

Settings — [NETWORK] menu f

For the LAN cable between a twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria: g

Compatible with CAT5e or higher g

Shielded type (including connectors) g

Straight-through g

Single wire f

The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance is exceeded, image and sound may be disrupted and may cause a malfunction in LAN communication.

f

When laying cables between a twisted-pair-cable transmitter and the projector, check that cable characteristics are compatible with CAT5e or higher using tools such as a cable tester or cable analyzer.

When using a relay connector midway, include it in the measurement.

f

Do not use a hub between a twisted-pair-cable transmitter and the projector.

f

Do not pull cables forcefully. Also, do not bend or fold cables unnecessarily.

f To reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projector without any loops.

f Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.

f When installing multiple cables, run them side by side along the shortest distance possible without bundling them together.

f

After laying the cables, conirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu

→ [DIGITAL LINK STATUS] is displayed in green (indicates normal quality). (x page 110) f

For twisted-pair-cable transmitter of other manufacturers of which the operation has been veriied with the DIGITAL LINK compatible projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the veriication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veriied. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers.

Accessing from the web browser

1)

Start up the web browser on the computer.

2) Enter the IP address set on the projector into the URL entry field of the web browser.

3) Enter the user name and the password.

f

The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case).

4) Click OK.

f

The [Projector status] page is displayed.

Note

f

If you use a web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL] (x page 111).

ENGLISH - 113

Chapter 4

Settings — [NETWORK] menu f

Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers.

f

Change the password irst. (x page 123) f

The administrator rights allow use of all functions. The user rights allow use of only the following functions: [Projector status] (x page 114), viewing of the error information page (x page 115), [Network status] (x page 116), [Access error] (x page 116), [Mail error]

(x page 116), [Basic control] (x page 117), [Advanced control] (x page 117), [Change password] (x page 123) f

Access will be locked for few minutes when an incorrect password is entered three times consecutively.

f

Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled properly if it is set with a browser that does not have this function enabled.

f

If the screen for the web control is not displayed, consult your network administrator.

f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.

f

The subsequent web control screens show examples for PT-EZ770Z. Screen content may differ from that for the model you are using.

Descriptions of items

1

2

3

4

5

6

1

Page tab

Pages are switched by clicking this item.

2 [Status]

The status of the projector is displayed by clicking this item.

3 [Projector control]

The [Projector control] page is displayed by clicking this item.

[Projector status] page

Click [Status] → [Projector status].

Display the status of the projector for the following items.

3

4

1

2

5

4 [Detailed set up]

The [Detailed set up] page is displayed by clicking this item.

5 [Change password]

The [Change password] page is displayed by clicking this item.

6 [Crestron Connected(TM)]

The control page of Crestron Connected

TM

is displayed by clicking this item.

10

11

12

13

14

15

16

8

9

6

7

1 [PROJECTOR TYPE]

Displays the type of the projector.

2 [MAIN VERSION]

Displays the irmware version of the projector.

3 [POWER]

Displays the status of the power.

4 [SHUTTER]

Displays the status of the shutter (ON: closed, OFF: open).

5 [PICTURE MODE]

Displays the setting status of [PICTURE MODE].

6 [SERIAL NUMBER]

Displays the serial number of the projector.

114 - ENGLISH

7 [NETWORK VERSION]

Displays the version of the irmware of the network.

8

[REMOTE2 STATUS]

Displays the control status of the <REMOTE 2 IN> terminal.

9 [LAMP POWER]

Displays the setting status of [LAMP POWER] (x page 89).

10 [VOLUME]

Display the volume status.

11 [INPUT SELECT]

Displays the status of the selected input.

12 [INTAKE AIR TEMPERATURE]

Displays the status of the air intake temperature of the projector.

Chapter 4

Settings — [NETWORK] menu

13 [AROUND LAMP TEMPERATURE]

Displays the status of the temperature around the lamp of the projector.

14 [LAMP RUNTIME]

Displays the runtime of the lamps (converted value).

15 [SELF TEST]

Displays the self-diagnosis information.

16 [PROJECTOR RUNTIME]

Displays the runtime of the projector.

Error information page

When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.

f The projector may go into the standby status to protect the projector depending on the contents of the error.

1

1 Self-diagnosis result display

Displays the item check results.

[OK]:

Indicates that operation is normal.

[FAILED]:

Indicates that there is a problem.

r [FAILED] items

Item

[MAIN CPU BUS]

[FAN]

[INTAKE AIR TEMPERATURE]

[AROUND LAMP TEMPERATURE]

[LAMP REMAIN TIME]

[LAMP STATUS]

[APERTURE(CONTRAST-SHUTTER)]

[SHUTTER(MUTE-SHUTTER)]

[INTAKE AIR TEMP.SENSOR]

[AROUND LAMP TEMP.SENSOR]

[BATTERY]

[AIRFLOW SENSOR]

[LENS MOUNTER]

[COVER OPEN]

[PRESSURE SENSOR]

[ANGLE SENSOR]

[FILTER UNIT]

[AIR FILTER]

Description

There is a problem with the microcomputer circuitry. Consult your dealer.

There is a problem with the fan or the fan drive circuit. Consult your dealer.

The air intake temperature is too high. The projector may be used in an environment where the temperature is high, such as near a heating appliance.

The temperature around the lamp is high. The air exhaust port may be blocked.

The runtime of the lamp has exceeded the speciied time, and it is time to replace the lamp.

The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then turn on the power.

There is a problem in the contrast shutter circuit for iris. Consult your dealer.

There is a problem with the shutter circuitry. Consult your dealer.

There is a problem with the sensor used to detect intake temperature. Consult your dealer.

There is a problem with the sensor used to detect exhaust air temperature. Consult your dealer.

Battery replacement is required. Consult your dealer.

There is a problem with the airlow sensor. Consult your dealer.

There is a problem in the lens mounter. Consult your dealer.

Installation of the lamp cover is incomplete. Check the installation of the lamp cover.

(x page 133)

There is a problem with the sensor that detects air pressure. Consult your dealer.

There is a problem with the sensor that detects angle. Consult your dealer.

The air ilter unit is not attached. Check the installation of the air ilter unit. (x page 132)

There is too much dust accumulated in the air ilter unit. Turn the <MAIN POWER> switch to <OFF> (x page 49), and clean the air ilter. (x page 132)

ENGLISH - 115

Chapter 4

Settings — [NETWORK] menu

[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

[Access error] page

Click [Status]

→ [Access error].

The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.

[Mail error] page

Click [Status]

→ [Mail error].

Display E-mail error information if failed to send periodic E-mails.

Note

f

[Access error] and [Mail error] display the recent few hundred accesses/requests. All information may not be displayed when many accesses/requests are made at a time.

f

When information in [Access error] and [Mail error] exceeds a certain amount, older information is erased.

f

Check [Access error] and [Mail error] periodically.

116 - ENGLISH

[Basic control] page

Click [Projector control] → [Basic control].

Chapter 4

Settings — [NETWORK] menu

1 [INPUT]

Switches the input signal.

2 [VOLUME]

Adjusts the volume.

3 [PICTURE MODE]

Switches the picture mode.

[Advanced control] page

Click [Projector control] → [Advanced control].

1

2

3

4

5

6

4 [SHUTTER]

Switches the setting whether to use the shutter function

(closing/opening of the shutter).

5 [POWER]

Turns on/off the power.

6 [CLOSED CAPTION]

Switches the closed caption setting.

1

2

1 [POSITION]

Operates ield angle-related settings.

2 [PICTURE]

Operates picture quality settings.

ENGLISH - 117

Chapter 4

Settings — [NETWORK] menu

[Network conig] page

Click [Detailed set up] → [Network conig].

f

Click [Network conig] to display the

[CAUTION!] screen.

f

Click the [Next] button to display the current settings.

f

Click the [Change] button to display the setting change screen.

1

2

3

4

5

6

7

8

1 [PROJECTOR NAME]

Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc.

2 [DHCP ON], [DHCP OFF]

To enable the DHCP client function, set to [DHCP ON].

3 [IP ADDRESS]

Enter the IP address when not using a DHCP server.

4 [SUBNET MASK]

Enter the subnet mask when not using a DHCP server.

5 [DEFAULT GATEWAY]

Enter the default gateway address when not using a DHCP server.

6 [DNS1]

Enter the DNS1 server address.

Permissible characters for the entry of DNS1 server address

(primary):

Numbers (0 - 9), period (.)

(Example: 192.168.0.253)

7

[DNS2]

Enter the DNS2 server address.

Available characters for the entry of DNS2 server address

(secondary):

Numbers (0 - 9), period (.)

(Example: 192.168.0.254)

8

[Back], [Change]

Click the [Back] button to return to the original screen. The screen for conirming the current settings is displayed by clicking the [Change] button. Click the [Submit] button to update the settings.

Note

f

When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click

[Network conig] again since the following operation will not be guaranteed.

f

Changing LAN settings while connected to the LAN may cause the connection to cut out.

[Ping test] page

Check whether the network is connected to the E-mail server, POP server, DNS server, etc.

Click [Detailed set up]

→ [Ping test].

1

2

3

4

3

Example of display when the connection has succeeded

4

Example of display when the connection has failed

1 [Input IP address]

Enter the IP address of the server to be tested.

2 [Submit]

Executes the connection test.

118 - ENGLISH

[Adjust clock] page

Click [Detailed set up] → [Adjust clock].

Chapter 4

Settings — [NETWORK] menu

1

2

5

6

3

4

7

1 [Timezone]

Selects the time zone.

2 [Set time zone]

Updates the time zone setting.

3

[NTP SYNCHRONIZATION]

Sets to [ON] to adjust the date and time automatically.

4 [NTP SERVER NAME]

Enter the IP address or server name of the NTP server when you set to adjust the date and time manually.

(To enter the server name, the DNS server needs to be set up.)

5 [Date]

Enter the date to be changed.

6 [Time]

Enter the time to be changed.

7 [Set date and time]

Updates the date and time settings.

Note

f

The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult your dealer.

ENGLISH - 119

Chapter 4

Settings — [NETWORK] menu

[E-mail set up] page

When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two addresses).

Click [Detailed set up]

→ [E-mail set up].

3

4

1

2

5

6

1 [ENABLE]

Select [Enable] to use the E-mail function.

2 [SMTP SERVER NAME]

Enter the IP address or the server name of the E-mail server

(SMTP). To enter the server name, the DNS server needs to be set up.

3 [MAIL FROM]

Enter the E-mail address of the projector. (Up to 63 characters in single byte)

4 [MEMO]

Enter information such as the location of the projector that notiies the sender of the E-mail. (Up to 63 characters in single byte)

5 [MINIMUM TIME]

Change the minimum interval for the temperature warning

E-mail. The default value is 60 minutes. In this case, another

E-mail will not be sent for 60 minutes after sending the temperature warning E-mail even if it reaches the warning temperature.

6 [INTAKE AIR TEMPERATURE]

Change the temperature setting for the temperature warning mail. A temperature warning E-mail is sent when the temperature exceeds this value.

7

7

8

8

7

[E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]

Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS

2] blank when two E-mail addresses are not to be used.

9

8 Settings of the conditions to send E-mail

Selects the conditions to send E-mail.

[MAIL CONTENTS]:

Selects either [NORMAL] or [SIMPLE].

[ERROR]:

Sends an E-mail when an error occurred in the self-diagnosis.

[LAMP RUNTIME]:

Sends an E-mail when the remaining time for the lamp has reached the value set at the right ield.

[INTAKE AIR TEMPERATURE]:

Sends an E-mail when the air intake temperature has reached the value set at the above ield.

[PERIODIC REPORT]:

Places a check mark on this to send an E-mail periodically.

It will be sent on the days and time with the check mark.

9 [Submit]

Updates the settings.

120 - ENGLISH

Chapter 4

Settings — [NETWORK] menu

[Authentication set up] page

Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.

Click [Detailed set up]

→ [Authentication set up].

1

2

3

4

7

8

5

6

1 [Auth]

Selects the authentication method speciied by your Internet service provider.

2 [SMTP Auth]

Set when the SMTP authentication is selected.

3 [POP Server name]

Enter the POP server name.

Allowed characters:

Alphanumerics (A - Z, a - z, 0 - 9)

Minus sign (-) and period (.)

4 [User name]

Enter the user name for the POP server or the SMTP server.

[ECO management set up] page

Settings related to the ECO management function of the projector can be made.

Click [Detailed set up]

→ [ECO management set up].

5 [Password]

Enter the password for the POP server or the SMTP server.

6 [SMTP server port]

Enter the port number of the SMTP server.

(Normally 25)

7 [POP server port]

Enter the port number of the POP server.

(Normally 110)

8

[Submit]

Updates the settings.

4

5

6

1

2

3

7

1 [LAMP POWER]

Selects the [LAMP POWER] setting.

2 [AUTO POWER SAVE]

Set to [ON] when setting [AMBIENT LIGHT DETECTION],

[SIGNAL DETECTION] and [SHUTTER DETECTION].

3 [AMBIENT LIGHT DETECTION]

Selects enable ([ON])/disable ([OFF]) of the environmental luminance interlock function.

4 [SIGNAL DETECTION]

Selects enable ([ON])/disable ([OFF]) of the no signal interlock function.

5 [SHUTTER DETECTION]

Selects enable ([ON])/disable ([OFF]) of the shutter interlock function.

6 [NO SIGNAL SHUT-OFF]

When the No signal shut-off function is used, select the time until the standby mode is entered.

7

[Submit]

Updates the settings.

Note

f

For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 89) on the projector.

ENGLISH - 121

Chapter 4

Settings — [NETWORK] menu

Contents of E-mail sent

Example of E-mail sent when E-mail is set

The following E-mail is sent when the E-mail settings have been established.

=== Panasonic projector report(CONFIGURE) ===

Projector Type : EZ770

Serial No : SN9250024

----- E-mail setup data -----

TEMPERATURE WARNING SETUP

MINIMUM TIME at [ 30] minutes interval

INTAKE AIR TEMPERATURE Over [ 36 degC / 96 degF ]

ERROR [ ON ]

LAMP RUNTIME

LAMP RUNTIME

[ ON ] at REMAIN [ 400] H

[ ON ] at REMAIN [ 500] H

INTAKE AIR TEMPERATURE [ ON ]

PERIODIC REPORT

Sunday [ OFF ] Monday [ OFF ] Tuesday [ OFF ] Wednesday [ OFF ]

Thursday [ OFF ] Friday [ OFF ] Saturday [ OFF ]

00:00 [ OFF ] 01:00 [ OFF ] 02:00 [ OFF ] 03:00 [ OFF ]

04:00 [ OFF ] 05:00 [ OFF ] 06:00 [ OFF ] 07:00 [ OFF ]

08:00 [ OFF ] 09:00 [ OFF ] 10:00 [ OFF ] 11:00 [ OFF ]

12:00 [ OFF ] 13:00 [ OFF ] 14:00 [ OFF ] 15:00 [ OFF ]

16:00 [ OFF ] 17:00 [ OFF ] 18:00 [ OFF ] 19:00 [ OFF ]

20:00 [ OFF ] 21:00 [ OFF ] 22:00 [ OFF ] 23:00 [ OFF ]

----- check system -----

MAIN CPU BUS

FAN

INTAKE AIR TEMPERATURE

[ OK ]

[ OK ]

[ OK ]

AROUND LAMP TEMPERATURE

LAMP REMAIN TIME

[ OK ]

[ OK ]

LAMP STATUS [ OK ]

APERTURE(CONTRAST-SHUTTER) [ OK ]

SHUTTER(MUTE-SHUTTER)

INTAKE AIR TEMP.SENSOR

AROUND LAMP TEMP.SENSOR

BATTERY

AIRFLOW SENSOR

LENS MOUNTER

COVER OPEN

[ OK ]

[ OK ]

[ OK ]

[ OK ]

[ OK ]

[ OK ]

[ OK ]

PRESSURE SENSOR

ANGLE SENSOR

FILTER UNIT

AIR FILTER

[ OK ]

[ OK ]

[ OK ]

[ OK ]

(Error code00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00)

Intake air temperature

Around lamp temperature

PROJECTOR RUNTIME

LAMP ECO

LAMP NORMAL

LAMP REMAIN

2500 H

100 H

200 H

: 45 degC / 113 degF

: 42 degC / 107 degF

1900 H

-------- Current status --------

MAIN VERSION 1.00

NETWORK VERSION

SUB VERSION

LAMP STATUS

INPUT SIGNAL

1.00

1.00

LAMP=ON

HDMI

SIGNAL NAME XGA60

SIGNAL FREQUENCY 65.4kHz / 54.4Hz

REMOTE2 STATUS ENABLE

----- Wired Network configuration -----

DHCP Client OFF

IP address 192.168.0.8

MAC address cc:7e:e8:00:00:00

Tue Jun 04 22:30:14:2013

----- Memo -----

122 - ENGLISH

Chapter 4

Settings — [NETWORK] menu

Example of the E-mail sent for an error

The following E-mail is sent when an error has occurred.

=== Panasonic projector report(ERROR) ===

Projector Type : EZ770

Serial No : SN9250024

----- check system -----

MAIN CPU BUS

FAN

INTAKE AIR TEMPERATURE

AROUND LAMP TEMPERATURE

[ OK ]

[ OK ]

[ OK ]

[ OK ]

LAMP REMAIN TIME

LAMP STATUS

[ OK ]

[ OK ]

APERTURE(CONTRAST-SHUTTER) [ OK ]

SHUTTER(MUTE-SHUTTER) [ OK ]

INTAKE AIR TEMP.SENSOR

AROUND LAMP TEMP.SENSOR

BATTERY

AIRFLOW SENSOR

[ OK ]

[ OK ]

[ OK ]

[ OK ]

LENS MOUNTER

COVER OPEN

PRESSURE SENSOR

[ OK ]

[ FAILED]

[ OK ]

ANGLE SENSOR

FILTER UNIT

[ OK ]

[ OK ]

AIR FILTER [ OK ]

(Error code00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00)

Intake air temperature

Around lamp temperature

PROJECTOR RUNTIME

LAMP ECO

LAMP NORMAL

LAMP REMAIN

: 45 degC / 113 degF

: 42 degC / 107 degF

2500 H

100 H

200 H

1900 H

-------- Current status --------

MAIN VERSION 1.00

NETWORK VERSION 1.00

SUB VERSION

LAMP STATUS

INPUT SIGNAL

SIGNAL NAME

1.00

LAMP=ON

HDMI

XGA60

SIGNAL FREQUENCY 65.4kHz / 54.4Hz

REMOTE2 STATUS ENABLE

----- Wired Network configuration -----

DHCP Client OFF

IP address 192.168.0.8

MAC address cc:7e:e8:00:00:00

Tue Jun 04 22:29:33:2013

----- Memo -----

[Change password] page

Click [Change password].

1

2

3

1 [Administrator]

Used to change the setting of the [Administrator].

2 [User]

Used to change the setting of the [User].

3

[Next]

Used to display the screen for changing the password.

ENGLISH - 123

[Administrator] account

Chapter 4

Settings — [NETWORK] menu

1

2

3

4

1 [Account]

Displays the account to change.

2 [Current]

[User name]:

Enter the user name before the change.

[Password]:

Enter the current password.

[User] account

3 [New]

[User name]:

Enter the desired new user name. (Up to 16 characters in single byte)

[Password]:

Enter the desired new password. (Up to 16 characters in single byte)

[Password(Retype)]:

Enter the desired new password again.

4 [OK]

Determines the change of password.

1

2

3

1 [Account]

Displays the account to change.

2 [New]

[User name]:

Enter the desired new user name. (Up to 16 characters in single byte)

[Password]:

Enter the desired new password. (Up to 16 characters in single byte)

[Password(Retype)]:

Enter the desired new password again.

3 [OK]

Determines the change of password.

124 - ENGLISH

Chapter 4

Settings — [NETWORK] menu

[Change password] (For user rights)

Only the change of password is enabled under the user rights.

1

2

3

4

1 [Old Password]

Enter the current password.

2 [New Password]

Enter the desired new password. (Up to 16 characters in single byte)

3 [Retype]

Enter the desired new password again.

4 [OK]

Determines the change of password.

Note

f

To change the account of the administrator, you must enter the [User name] and [Password] in [Current].

[Crestron Connected(TM)] page

The projector can be monitored/controlled with Crestron Connected

TM

.

To start the control page of Crestron Connected

TM

from the web control screen, you need to access with the administrator rights. (For user rights, the [Crestron Connected(TM)] button is not displayed on the web control screen.)

The control page of Crestron Connected

TM

is displayed by clicking [Crestron Connected(TM)].

It is not displayed if Adobe

®

Flash

®

Player is not installed on the computer used, or the browser used does not support Flash. In that case, click

[Back] on the control page to go back to the previous page.

Control page

1

2

3

4

5

1

[Tools], [Info], [Help]

Tabs for selecting the setting, information, or help page of the projector.

2 [POWER]

Turns off/on the power.

3

[VOL DOWN], [VOL UP]

Adjusts the volume.

[SHUTTER]

Switches the setting whether to use the shutter function

(closing/opening of the shutter).

6

7

4 [Input Select]

Controls input selection.

Not available when the power of the projector is turned off.

5 Menu screen control buttons

Navigates the menu screen.

6

Freeze/image quality adjustment

Controls items related to freeze/image quality.

7 [Back]

Performs return to the previous page.

ENGLISH - 125

Chapter 4

Settings — [NETWORK] menu

[Tools] page

Click [Tools] on the control page.

1 [Control System]

Set the information required for communicating with the controller to be connected with the projector.

2 [User Password]

Set the user rights password for the Crestron Connected

TM control page.

3 [Admin Password]

Set the administrator rights password for the Crestron

Connected

TM

control page.

1

2

3

4

5

4 Network status

Displays the settings of wired LAN.

[DHCP]

Displays the current setting.

[IpAddress]

Displays the current setting.

[SubnetMask]

Displays the current setting.

[DefaultGateway]

Displays the current setting.

[DNSServer]

Displays the current setting.

5 [Exit]

Returns to the control page.

[Info] page

Click [Info] on the control page.

1

2

3

1 [Projector Name]

Displays the projector name.

2 [Mac Address]

Displays the MAC address.

3 [Lamp Hours]

Displays the runtime of the lamps (converted value).

4 [Power Status]

Displays the status of the power.

6

7

8

4

5

5 [Source]

Displays the selected input.

6 [Lamp Mode]

Displays the setting status of [LAMP POWER] (x page 89).

7 [Error Status]

Displays the error status.

8

[Exit]

Returns to the control page.

126 - ENGLISH

[Help] page

Click [Help] on the control page.

The [Help Desk] window is displayed.

Chapter 4

Settings — [NETWORK] menu

1

1 [Help Desk]

Send/receive messages to/from an administrator who uses

Crestron Connected

TM

.

ENGLISH - 127

Chapter 5

Maintenance

This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units.

128 - ENGLISH

Chapter 5Maintenance — Lamp/temperature/ilter indicators

Lamp/temperature/ilter indicators

When an indicator lights up

If a problem should occur inside the projector, the lamp indicator <LAMP>, the temperature indicator <TEMP>, and the ilter indicator

<FILTER> will inform you by lighting or lashing. Check the status of the indicators and remedy the indicated problems as follows.

Attention

f

When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector” (x page 49).

Lamp indicator <LAMP>

Filter indicator <FILTER>

Temperature indicator <TEMP>

Lamp indicator <LAMP>

Indicator status

Status

Cause

Solution

Lighting in red

Time to replace the lamp unit. (x page 133) f

Was [REPLACE LAMP] displayed when you turned on the power?

f The indicator lights up when the runtime of the lamp unit reaches

2 800 hours (when

[LAMP POWER] is set to

[NORMAL]).

Flashing in red

(1 time)

The lamp unit is not installed.

f

Is the lamp unit attached?

the lamp.

Flashing in red

(3 times)

A problem is detected in the lamp or the power supply for f

Have you turned on the power again immediately after turning it off?

f

Some error has occurred in the lamp circuit. Check for luctuation (or drop) in the source voltage.

f Replace the lamp unit.

f

Install the lamp unit if it is not installed.

f

If the indicator is still lashing in red even when having installed the lamp unit, consult your dealer.

f Wait a while until the luminous lamp cools off, and then turn on the power.

f

Turn the <MAIN POWER> switch to <OFF>

(x page 49), and consult your dealer.

Note

f

If the lamp indicator <LAMP> is still lit or lashing after taking the preceding measures, ask your dealer for repair.

ENGLISH - 129

Chapter 5Maintenance — Lamp/temperature/ilter indicators

Temperature indicator <TEMP>

Indicator status

Lighting in red

Flashing in red

(2 times)

Flashing in red

(3 times)

Status

The cooling fan has stopped.

Cause

Solution

f

Is the air intake/exhaust port blocked?

f

Is the room temperature high?

f

Is the ilter indicator <FILTER> lit?

f

Remove any objects that are blocking the air intake/exhaust port.

f

Install the projector in a location with the operating environment temperature between 0 °C (32 °F) and 45 °C (113 °F)

*1 .

f

Do not install the projector at high altitudes of 2 700 m (8 858') or higher above sea level.

f

Clean or replace the air ilter unit. (x page 131)

― f

Turn the <MAIN POWER> switch to

<OFF> (x page 49), and consult your dealer.

*1

When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F).

Note

f

If the temperature indicator <TEMP> is still lit or lashing after taking the preceding measures, ask your dealer for repair.

f

If you use the projector with the following function set, [LAMP POWER] may be set to [ECO2] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 °C (95 °F) or higher when using the projector at high altitudes).

g

When [LAMP POWER] is set to [AUTO] or [NORMAL] from the menu

Filter indicator <FILTER>

Indicator status

Status

Cause

Solution

f

Is the air ilter unit dirty?

Lighting in red

The ilter is clogged.

The temperature inside or outside the projector is abnormally high.

f

Is the air intake/exhaust port blocked?

f

Clean or replace the air ilter unit.

(x page 131) f Remove any objects that are blocking the air intake/exhaust port.

Flashing in red

The air ilter unit is not attached.

f

Is the air ilter unit attached?

f

Attach the air ilter unit.

Note

f

If the ilter indicator <FILTER> is still lit or lashing after taking the preceding measures, ask your dealer for repair.

130 - ENGLISH

Chapter 5Maintenance — Maintenance/replacement

Maintenance/replacement

Before performing maintenance/replacement

f

Make sure to turn off the power before maintaining the projector or replacing the unit. (x pages 47, 49) f

When switching off the projector, make sure to follow the procedures in “Switching off the projector” (x page 49).

Maintenance

Outer case

Wipe off dirt and dust with a soft, dry cloth.

f

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth.

f

Do not use benzene, thinner, or rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case.

f When using chemically treated dust cloths, follow the instructions written on its packaging.

Lens front surface

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

f

Do not use a cloth that is luffy, dusty, or soaked with oil/water.

f

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

f

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Handle with care.

Air ilter unit

Perform maintenance of the air ilter in the following case.

f

The air ilter is clogged with dust, causing the ilter replacement message to appear on the screen and the ilter indicator <FILTER> to light in red.

Attention

f

Make sure to turn off the power before performing maintenance on the air ilter unit.

f

Make sure that the projector is stable, and perform the maintenance in a safe place where the unit will not be damaged even if you drop the air ilter unit.

Removing the air ilter unit

Air filter cover Tabs on the projector Air filter unit

Air filter cover fixing screw

Fig. 1

Air filter unit compartment and the projector’s air intake port

Fig. 3 Fig. 2

1) Remove the air filter cover. (Fig. 1)

f

Use a Phillips screwdriver to turn the air ilter cover ixing screw (x1) counterclockwise until it turns freely, and gently pull open in the direction of the arrow with your inger placed on the indent of the air ilter cover and remove the cover.

f

When pulling open the air ilter cover, be sure to irmly hold the air ilter cover with your hand. Opening the air ilter cover quickly may result in the cover falling.

2) Remove the air filter unit.

f

Pull out the air ilter unit from the tabs of the projector while slightly pressing the tab at the center of the frame at the connecting terminal side (rear side) inward as shown by the arrow, and remove the air ilter unit. (Fig. 2) f

After pulling out the air ilter unit, remove foreign objects and dust from the air ilter unit compartment and the projector’s air intake port if there are any. (Fig. 3)

ENGLISH - 131

Chapter 5Maintenance — Maintenance/replacement

Cleaning the air ilter unit

Remove the air ilter unit beforehand according to the previously described procedure in “Removing the air ilter unit”.

Fig. 1 Fig. 2

1) Wash the air filter unit. (Fig. 1)

i)

Soak the air filter unit in cold or warm water and then lightly rinse it.

f

Do not use cleaning tools such as brushes.

f

When rinsing, hold the frame of the air ilter unit without putting strong pressure on the ilter.

ii) Rinse the air filter unit two to three times using fresh water each time.

f

Insuficient rinsing may result in odors.

2) Dry the air filter unit. (Fig. 2)

f

Let the air ilter unit naturally dry off in a well-ventilated place where there is little dust and is not exposed to direct sunlight.

f

Do not dry using drying devices such as dryers.

f

After the air ilter unit is dried, proceed to “Attaching the air ilter unit” (x page 132).

Attaching the air ilter unit

1) Attach the air filter unit to the projector.

f

Perform Step 2) in “Removing the air ilter unit” in the reverse order.

f

Push in the air ilter unit securely until it clicks into place.

2) Attach the air filter cover.

f

Perform Step 1) in “Removing the air ilter unit” in the reverse order to close the air ilter cover, and push in the air ilter cover securely until it clicks into place.

f

Use a Phillips screwdriver to irmly tighten the air ilter cover ixing screw (x1).

Attention

f

After washing the air ilter unit, dry it thoroughly before attaching it back to the projector. Attaching a wet unit will cause an electric shock or malfunction.

f

Do not disassemble the air ilter unit.

f

Make sure that the air ilter unit is properly attached before using the projector. If it is not attached, the projector will suck in dirt and dust causing a malfunction.

Note

f

If you use the projector without attaching the air ilter unit, the ilter indicator <FILTER> lashes in red and the message appears on the projected image for approximately 30 seconds.

f

Replace the air ilter unit with the new optional Replacement Filter Unit (Model No.: ET-RFE300) if it is damaged or if the dirt does not come off even after washing.

f

Air ilter replacement is recommended after cleaning the unit two times.

f The dust-proof properties may be reduced after each cleaning.

132 - ENGLISH

Chapter 5Maintenance — Maintenance/replacement

Replacing the unit

Lamp unit

The lamp unit is a consumable component. Refer to “When to replace the lamp unit” (x page 133) for details about the replacement cycle.

When purchasing the optional Replacement Lamp Unit (Model No.: ET-LAE300), consult your dealer.

It is recommended that you request a qualiied technician to replace the lamp unit. Consult your dealer.

Warning

Replace the lamp unit after the lamp has cooled (after waiting at least one hour).

The high temperature inside the cover will cause burns.

Notes on the replacement of the lamp unit

f

A Phillips screwdriver is necessary when replacing the lamp unit.

f

Since the luminous lamp is made of glass, it may burst if dropped or hit with a hard object. Handle with care.

f

Do not disassemble or modify the lamp unit.

f When replacing the lamp unit, be sure to hold it by the handle because its surface is pointed and its shape is protruded.

f The lamp may rapture. Replace the lamp unit carefully so the glass fragments of the lamp do not scatter. While attaching the projector to the ceiling, do not work right under the lamp unit or do not conduct work while your face is near the lamp unit.

f The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal.

Attention

f Panasonic takes no responsibility for any damage or malfunction of the product resulting from use of lamp units which are not manufactured by Panasonic. Use only speciied lamp units.

Note

f The model numbers of accessories and optional accessories are subject to change without prior notice.

When to replace the lamp unit

The lamp unit is a consumable component. Since its brightness gradually decreases over time, it is necessary to replace the lamp unit regularly. The estimated duration before replacement is 3 000 hours, but the lamp may go off before reaching to 3 000 hours, depending on the characteristics of the individual lamp, usage conditions, and the installation environment. It is recommended that the Replacement Lamp

Unit be prepared earlier.

If you continue to use the lamp unit after 3 000 hours has elapsed, the lamp turns off automatically after approximately 10 minutes, as it may cause malfunction of the projector.

On-screen display

REPLACE LAMP

Lamp indicator

Over 2 800 hours

Over 3 000 hours

The message is displayed for 30 seconds. Pressing any button on the control panel or remote control within 30 seconds will clear the message.

The message remains displayed until you press any button.

The indicator lights in red even during the standby mode.

Note

f

To predict when to replace the lamp, check the lamp runtime displayed at [LAMP : TOTAL] in [STATUS] (x page 96).

f 3 000 hours is only the target for replacement and not the warranty time.

How to replace the lamp unit

Attention

f While attaching the projector to the ceiling, do not work right under the lamp unit or do not conduct work while your face is near the lamp unit.

f

Do not remove or loosen the screws other than speciied ones when replacing the lamp unit.

f

Make sure to attach the lamp unit and the lamp cover securely.

ENGLISH - 133

Chapter 5Maintenance — Maintenance/replacement f

If the lamp unit is not installed properly, remove it and then push it in slowly. Pushing it in quickly or forcibly may break the connector.

Lamp unit fixing screws

Lamp cover

Lamp cover fixing screw

Lamp unit

Handles

Fig. 1 Fig. 2

1) Set the <MAIN POWER> switch to <OFF> and disconnect the power plug from the power outlet.

f Wait at least one hour and check if the lamp unit has cooled down.

2) Remove the lamp cover. (Fig. 1)

f

Use a Phillips screwdriver to turn the lamp cover ixing screw (x1) counterclockwise until it turns freely, and slide the lamp cover slowly in the direction of the arrow to remove it.

f

Opening the lamp cover quickly may result in falling.

3)

Remove the lamp unit. (Fig. 2)

f

Use a Phillips screwdriver to turn the lamp unit ixing screws (x3) counterclockwise until they turn freely, and remove the lamp unit.

f

Hold the handles of the lamp unit and remove it straight.

4) Push in the new lamp unit while paying attention to the insertion position.

f

If the lamp unit is not installed properly, remove it and then push it in slowly. Pushing it in quickly or forcibly may break the connector.

5) Use a Phillips screwdriver to firmly tighten the lamp unit fixing screws (x3).

f

Make sure to attach the lamp unit securely.

6) Attach the lamp cover.

i)

Perform Step 2) in the reverse order to attach the lamp cover.

ii)

Use a Phillips screwdriver to firmly tighten the lamp cover fixing screw (x1).

f

Make sure to attach the lamp cover slowly and securely.

Note

f When you replace the lamp unit with new one, the projector resets the runtime of the lamp unit automatically.

Air ilter unit

When the dust remains after cleaning, the ilter replacement timing has come.

The Replacement Filter Unit (Model No.: ET-RFE300) is an optional accessory. To purchase the product, consult your dealer.

How to replace the air ilter unit

Attention

f

Make sure to turn off the power before replacing the air ilter unit.

f

Make sure that the projector is stable, and perform the replacement in a safe place where the unit will not be damaged even if you drop the air ilter unit.

1) Remove the air filter unit.

f

Refer to “Removing the air ilter unit” (x page 131).

2) Attach the optional Replacement Filter Unit (Model No.: ET-RFE300) to the projector.

f

Refer to “Attaching the air ilter unit” (x page 132).

Attention

f

When using the projector, be sure to attach the air ilter unit. If it is not attached, the projector will suck in dirt and dust causing a malfunction.

134 - ENGLISH

Chapter 5Maintenance — Maintenance/replacement

Note

f

If you use the projector without attaching the air ilter unit, the ilter indicator <FILTER> lashes in red and the message appears on the projected image for approximately 30 seconds.

ENGLISH - 135

Chapter 5Maintenance — Troubleshooting

Troubleshooting

Review the following points. For details, see the corresponding pages.

Problems

Power does not turn on.

No image appears.

Image is fuzzy.

Color is pale or grayish.

Audio is not output.

Audio is not output from the built-in speaker.

Remote control does not respond.

Menu screen does not appear.

Buttons on the control panel do not operate.

Image does not display correctly.

Image from a computer does not appear.

Image output from DVI-D of the computer does not appear.

Points to be checked

f

Is the power plug irmly inserted into the outlet?

f

Is the <MAIN POWER> switch set to <OFF>?

f

Is the wall outlet supplying electricity?

f

Have the circuit breakers tripped?

f

Is the lamp indicator <LAMP> or the temperature indicator <TEMP> lit or lashing?

f

Is the lamp cover attached securely?

f

Are connections to external devices correctly performed?

f

Is the input selection setting correct?

f

Is the [BRIGHTNESS] adjustment setting at a minimum?

f

Is the external device that is connected to the projector working properly?

f

Is the shutter function in use?

f

If the power indicator <ON (G)/STANDBY (R)> is lashing in red, consult your dealer.

f

Is the lens cover still attached to the lens?

f

Is the lens focus set correctly?

f

Is the projection distance appropriate?

f

Is the lens dirty?

f

Is the projector installed perpendicular to the screen?

f

Is [COLOR] or [TINT] adjusted correctly?

f

Is the external device connected to the projector adjusted correctly?

f

Is the RGB cable damaged?

f

Is the external device connected correctly to the audio input terminal?

f

Is [MUTE] in [AUDIO SETTING] set to [ON]?

f

Is the audio input selection in [AUDIO SETTING] set correctly?

f

Is [BUILT-IN SP] in [AUDIO SETTING] set to [OFF]?

f

Is the audio input selection in [AUDIO SETTING] set correctly?

f

Are the batteries depleted?

f

Is the polarity of the batteries set correctly?

f

Are there any obstructions between the remote control and the remote control signal receiver of the projector?

f

Is the remote control being used beyond its effective operation range?

f

Are other forms of light, such as luorescent light, affecting the projection?

f

Is the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] set to

[DISABLE]?

f

Is the <REMOTE 2 IN> terminal used for contact control?

f

Is the ID number setting operation correct?

f

Is the cable that is connected to the <REMOTE 1 IN> terminal connected to the remote control wired terminal?

f

Is the on-screen display function turned off (hidden)?

f

Is the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] set to

[DISABLE]?

f

Is the <REMOTE 2 IN> terminal used for contact control?

f

Is the [SYSTEM SELECTOR] selection set correctly?

f

Is there a problem with the video tape or other image sources?

f

Is a signal which is not compatible with the projector being input?

f

Is the cable too long? (For D-Sub cables, the cable length should be 10 m (32'10") or shorter.) f

Is the external video output on the laptop computer set correctly? (Ex.: The external output settings may be switched by pressing “Fn” + “F3” or “Fn” + “F10” simultaneously. Since the method varies depending on the computer type, refer to the user manual provided with your computer.) f

Is the [DVI-D IN] setting [EDID3] or [EDID2:PC]?

f The graphics accelerator driver of the computer may need to be updated to the latest version.

f

The computer may need to be restarted after performing the [DVI-D IN] setting.

136 - ENGLISH

80

80

81

108

145

68

148

27

27

108

145

30

31

42

95

95

95

29

95

30

20

65

48

51

34

Page

49

129

133

42

53

65

53

27

Chapter 5Maintenance — Troubleshooting

Problems

Video from HDMI compatible device does not appear or it appears jumbled.

Image output from

DisplayPort of the computer does not appear.

The DIGITAL LINK input image or sound is not output.

Points to be checked

f

Is the HDMI cable connected securely?

f

Turn off and on the power of the projector and the external device.

f

Is a signal which is not compatible with the projector being input?

f

If connecting the projector to a computer that uses an early-type chipset or graphics card compatible with DisplayPort, the projector or computer may not be operated properly.

f The graphics accelerator driver of the computer may need to be updated to the latest version.

f

Turn off and on the power of the projector and the external device.

f

Is a signal which is not compatible with the projector being input?

f

Are the connections between the twisted-pair-cable transmitter and the projector or an external device correctly done?

f

Is [DIGITAL LINK MODE] set to [AUTO] or [DIGITAL LINK]? Is it set to

[ETHERNET]?

f

Is a signal which is not compatible with a twisted-pair-cable transmitter being input?

Attention

f

If problems persist even after checking the preceding points, consult your dealer.

Page

42

148

150

109

ENGLISH - 137

Chapter 6

Appendix

This chapter describes speciications for the projector.

138 - ENGLISH

Chapter 6

Appendix — Technical information

Technical information

PJLink protocol

The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer.

Control commands

The following table lists the PJLink protocol commands that can be used to control the projector.

f x characters in tables are non-speciic characters.

Command

POWR

POWR?

INPT

INPT?

AVMT

AVMT?

ERST?

Control details

Power supply control

Power supply status query

Input selection

Input selection query

Shutter control

*1

Shutter status query

Error status query

0

1

2

3

0

1

11

12

21

31

32

33

34

30

31

Parameter/return string

xxxxxx

Lamp status query xxxxxx

Input selection list query 11 12 21 31 32 33 34

Remark

Standby

Power on

Standby

Power on

Preparing for switching off the projector

Warm-up

RGB1

RGB2

VIDEO

DVI-D

HDMI

DIGITAL LINK

DisplayPort

Shutter function off (shutter open)

Shutter function on (shutter closed)

1st byte

Indicates fan errors, and returns

0 - 2.

2nd byte

3rd byte

4th byte

5th byte

6th byte

Indicates lamp errors, and returns 0 - 2.

Indicates temperature errors, and returns 0 - 2.

Indicates cover open errors, and returns 0 or 2.

Indicates ilter errors, and returns 0 - 2.

Indicates other errors, and returns 0 - 2.

1st digit (1 - 5 digits): Lamp runtime

2nd digit: 0 = Lamp off, 1 = Lamp on f

0 = No error is detected f 1 = Warning f 2 = Error

LAMP?

INST?

NAME?

INF1?

INF2?

INF0?

CLSS?

Projector name query

Manufacturer name query

Model name query

Other information queries xxxxx

Panasonic

EZ770

EW730

EX800 xxxxx

Class information query 1

Returns the name set in [PROJECTOR NAME] of [NETWORK

SETUP].

Returns manufacturer name.

Returns model name.

Returns information such as version number.

Returns class for PJLink.

*1

When the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch on/off in a short time.

PJLink security authentication

The password used for PJLink is the same as that of the password set for web control.

When using the projector without security authentication, do not set a password for web control.

f

For speciications related to PJLink, refer to the website of Japan Business Machine and Information System Industries Association.

URL http://pjlink.jbmia.or.jp/english/

ENGLISH - 139

Chapter 6

Appendix — Technical information

Control commands via LAN

When web control administrator rights password is set (Protect mode)

Connecting

1)

Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector.

f

You can obtain both the IP address and the port number from the menu screen of the projector.

IP address

Port number

Obtain from the main menu

→ [NETWORK] → [NETWORK STATUS]

Obtain from the main menu

→ [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]

2) Check the response from the projector.

Command example

Data length

f

Mode: 1 = Protect mode

3)

Generate a 32-byte hash value from the following data using MD5 algorithm.

f

“xxxxxx:yyyyy:zzzzzzzz”

xxxxxx yyyyy zzzzzzzz

Data section

“NTCONTROL”

(ASCII string)

9 bytes

Blank

‘ ’

0x20

1 byte

Mode

‘1’

0x31

1 byte

Blank

‘ ’

0x20

1 byte

Random number section

“zzzzzzzz”

(ASCII code hex number)

8 bytes

Administrator rights user name for the web control (default user name is “admin1”)

Password of above administrator rights user (default password is “panasonic”)

8-byte random number obtained in Step

2)

Termination symbol

(CR)

0x0d

1 byte

Command transmission method

Transmit using the following command formats.

r Transmitted data

Command example

Data length

Header

Hash value

(Refer to “Connecting” above)

32 bytes

‘0’

0x30

1 byte

r Received data

Header

Command example

Data length

r Error response

‘0’

0x30

1 byte

‘0’

0x30

1 byte

‘0’

0x30

1 byte

Message

Data length

String

“ERR1”

“ERR2”

“ERR3”

“ERR4”

“ERR5”

“ERRA”

4 bytes

Undeined control command

Out of parameter range

Busy state or no-acceptable period

Timeout or no-acceptable period

Wrong data length

Password mismatch

Details

140 - ENGLISH

Data section

Control command

(ASCII string)

Undeined length

Data section

Control command

(ASCII string)

Undeined length

Termination symbol

(CR)

0x0d

1 byte

Termination symbol

(CR)

0x0d

1 byte

Termination symbol

(CR)

0x0d

1 byte

Chapter 6

Appendix — Technical information

When web control administrator rights password is not set (Non-protect mode)

Connecting

1)

Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector.

f

You can obtain both the IP address and the port number from the menu screen of the projector.

IP address

Port number

Obtain from the main menu

→ [NETWORK] → [NETWORK STATUS]

Obtain from the main menu → [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]

2) Check the response from the projector.

Command example

Data length

Data section

“NTCONTROL”

(ASCII string)

9 bytes f

Mode: 0 = Non-protect mode

Blank

‘ ’

0x20

1 byte

Mode

‘0’

0x30

1 byte

Termination symbol

(CR)

0x0d

1 byte

Command transmission method

Transmit using the following command formats.

r Transmitted data

Command example

Data length

‘0’

0x30

1 byte

Header

‘0’

0x30

1 byte

Data section

Control command

(ASCII string)

Undeined length

Termination symbol

(CR)

0x0d

1 byte

r Received data

Command example

Data length

‘0’

0x30

1 byte

Header

‘0’

0x30

1 byte

Data section

Control command

(ASCII string)

Undeined length

Termination symbol

(CR)

0x0d

1 byte

r Error response

Termination symbol

Message

Data length

String

“ERR1”

“ERR2”

“ERR3”

“ERR4”

“ERR5”

“ERRA”

4 bytes

Undeined control command

Out of parameter range

Busy state or no-acceptable period

Timeout or no-acceptable period

Wrong data length

Password mismatch

Details

(CR)

0x0d

1 byte

ENGLISH - 141

Chapter 6

Appendix — Technical information

<SERIAL IN> terminal

The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer.

Connection

When connecting directly

Projector connecting terminals

D-Sub 9p (female)

Computer

D-Sub 9p (male)

Communication cable (straight)

When connecting with DIGITAL LINK compatible devices

Projector connecting terminals

DIGITAL LINK

DIGITAL LINK compatible device

DIGITAL LINK D-Sub 9p (female)

Computer

D-Sub 9p (male)

LAN cable (straight) Communication cable (straight)

Note

f

The destination of [RS-232C] (x page 92) must be set according to the connection method.

f

When connecting by a DIGITAL LINK compatible device, set the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY

MODE] (x page 90) to [NORMAL] to control the projector in standby mode.

When [STANDBY MODE] is set to [ECO], the projector cannot be control during standby.

Pin assignments and signal names

D-Sub 9-pin (female)

Outside view

(5)

(9)

(1)

(6)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Signal name

TXD

RXD

GND

CTS

RTS

Details

NC

Transmitted data

Received data

NC

Earth

NC

Connected internally

NC

Communication conditions (Factory default)

Signal level

Sync. method

Baud rate

Parity

Character length

Stop bit

X parameter

S parameter

RS-232C-compliant

Asynchronous

9 600 bps

None

8 bits

1 bit

None

None

142 - ENGLISH

Chapter 6

Appendix — Technical information

Basic format

Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control.

ID designate

ZZ, 01 to 64

(2 bytes)

3 command characters (3 bytes)

Semi-colon (1 byte)

Colon (1 byte)

2 ID characters (2 bytes)

End (1 byte)

Parameter (undefined length)

Start (1 byte)

Basic format (has subcommands)

Same as the basic format

Sub command (5 bytes) Parameter (6 bytes) *1

Symbol “+” or “-” (1 byte) and setting or adjustment value (5 bytes)

Operation (1 byte) *1

“=” (Set the value specified using parameter)

*1

When transmitting a command which does not need a parameter, an operation (E) and parameter are not necessary.

Attention

f

If a command is transmitted after the lamp starts illuminating, there may be a delay in response or the command may not be executed. Try sending or receiving any command after 60 seconds.

f

When transmitting multiple commands, be sure to wait until 0.5 seconds has elapsed after receiving the response from the projector before sending the next command. When transmitting a command which does not need a parameter, a colon (:) is not necessary.

Note

f f

If a command cannot be executed, the “ER401” response is sent from the projector to the computer.

If an invalid parameter is sent, the “ER402” response is sent from the projector to the computer.

f

ID transmission in RS-232C supports ZZ (ALL) and 01 to 64.

f

If a command is sent with a speciied ID, a response will be sent to the computer only in the following cases.

g

It matches the projector ID g

When [PROJECTOR ID] (x page 88) on the projector is [ALL] f

STX and ETX are character codes. STX shown in hexadecimal is 02, and ETX shown in hexadecimal is 03.

ENGLISH - 143

Chapter 6

Appendix — Technical information

Cable speciication

When connected to a computer

Projector

(<SERIAL IN> terminal)

1

NC NC

1

2 2

3 3

4

NC NC

4

5 5

6

NC NC

6

7 7

8 8

9

NC NC

9

Computer

(DTE specifications)

Control command

The following table lists the commands that can be used to control the projector using a computer.

r Projector control command

Command

PON

POF

Power on

Details

Power standby

QPW

IIS

Power query

Switching the input signal

Parameter/return string

000

001

VID

RG1

RG2

DVI

HD1

DL1

DP1

Remark (parameter)

To check if the power is on, use the “Power query” command.

STANDBY

Power on

VIDEO

RGB1

RGB2

DVI-D

HDMI

DIGITAL LINK

DisplayPort

Q$L

OSH

QSH

VSE

QSE

OPP

QPP

Lamp cumulative runtime query

Shutter

*1

Shutter status query

Aspect ratio switch

Aspect ratio settings query

P IN P execution

P IN P setting query

0

1

0

1

2

5

6

9

10

2

3

0

1

Returned with 0000 to 4000

Shutter off (open)

Shutter on (closed)

NORMAL/VID AUTO/AUTO

4:3

WIDE

NATIVE

FULL

H FIT

V FIT

OFF

USER1

USER2

USER3

OCS

QSB

Sub memory switch

Sub memory status query

01 - 96 Sub memory number

*1

When the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch on/off in a short time.

r

Projector control command (with sub command)

Command

VXX

VXX

Sub command

LPWI1

RYCI2

Details

Lamp power selection

RGB2 input setting

Remark

+00001=NORMAL, +00020=ECO1, +00021=ECO2, +00030=AUTO

+00000=RGB/YP

B

P

R

, +00001=Y/C, +00002=VIDEO

144 - ENGLISH

Chapter 6

Appendix — Technical information

r Lens control command

Command

VXX

VXX

VXX

VXX

Sub command

LNSI2

LNSI3

LNSI4

LNSI5

Details

Lens H shift

Lens V shift

Lens focus

Lens zoom

Remark

+00000=Fine adjustment 1+, +00001=Fine adjustment 1-,

+00100=Fine adjustment 2+, +00101=Fine adjustment 2-,

+00200=Coarse adjustment+, +00201=Coarse adjustment-

<REMOTE 2 IN> terminal

It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach.

Use the <REMOTE 2 IN> terminal on the connecting terminals of the projector to connect to the control panel.

Remote control Contact control

Remote control/contact control

Standby Lit

Lamp

RGB1

RGB2

VIDEO

HDMI

DVI-D

Remote control board in another location

Installation locations in meeting rooms, etc.

Pin assignments and signal names

D-Sub 9-pin

Outside view

(5)

(9)

(1)

(6)

Pin No.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Signal name

GND

POWER

RGB1

RGB2

VIDEO

HDMI

DVI-D

SHUTTER

RST/SET

Open (H)

OFF

Other

Other

Other

Other

Other

OFF

Controlled by remote control

Short (L)

GND

ON

RGB1

RGB2

VIDEO

HDMI

DVI-D

ON

Controlled by external contact

Attention

f

When controlling, make sure to short-circuit pins (1) and (9).

f

When pins (1) and (9) are short-circuited, the following buttons on the control panel and the remote control are disabled. Commands for

RS-232C and network functions corresponding to these functions are also disabled.

g Power <v

/b> button on the control panel or the power on <b> button, power standby <v> button, and <SHUTTER> button on the remote control f

When pins (1) and (9) are short-circuited, and then any pins from (3) to (7) and the pin (1) are short-circuited, the following buttons on the control panel and the remote control are disabled. Commands for RS-232C and network functions corresponding to these functions are also disabled.

g Power <v

/b> button on the control panel or the power on <b> button, power standby <v> button, <RGB1/2> button, <DVI-D> button,

<VIDEO> button, <HDMI> button, <DIGITAL LINK> button, <DisplayPort> button, and <SHUTTER> button on the remote control

Note

f

For pin (2) to pin (8) settings, you can make changes if you set [REMOTE2 MODE] to [USER]. (x page 94)

ENGLISH - 145

Chapter 6

Appendix — Technical information

Two-window display combination list

Main window

RGB1 input

RGB2 input

Still image signal

Movie-based signal

*1

Still image signal

Movie-based signal *1

Y/C signal

Video signal

VIDEO input

DVI-D input

HDMI input

DIGITAL LINK input

DisplayPort input

Still image signal

*2

Movie-based signal

*3

Still image signal

*2

Movie-based signal

*3

Still image signal

*2

Movie-based signal *3

Still image signal

*2

Movie-based signal

*3

l l l l l

Still image

RGB1

Movie

*1

― ― l l a

― a l l l l l l l l a l a l a l a l l l

Still image

l l

― l l

Sub window

RGB2

Movie

*1

Y/C

l l a

― a

― l a

― l l l l l a l a l a l a l a l a a l a

Main window

RGB1 input

RGB2 input

Still image signal

Movie-based signal

*1

Still image signal

Movie-based signal

*1

Y/C signal

Video signal

VIDEO input

DVI-D input

Still image signal

*2

Movie-based signal

*3

HDMI input

DIGITAL LINK input

DisplayPort input

Still image signal

*2

Movie-based signal *3

Still image signal

*2

Movie-based signal

*3

Still image signal

*2

Movie-based signal

*3

Still image

*2

DVI-D

Movie *3

l l l a l l l l l

― l a a a a

― ― l l l l

― l a l a

― l

― l

Sub window

Still image

*2

HDMI

Movie *3

DIGITAL LINK

Still image

*2

Movie *3

l l l l l a l a l l l a l l l a l l l l a a a l l l l l a a a l l a

― l a l

― l l a a

― l a l a

Video

l a

― l a l a l l l

DisplayPort

Still image

*2

Movie *3

l l l a l l l l l

― l a a a a

― ― l l l a l a

VIDEO

a l a a l l a l a

― l a l

146 - ENGLISH

Chapter 6

Appendix — Technical information l

: P IN P (picture in picture) combination is possible a

: P IN P combination is possible on the following conditions. (Image on a sub window may be disrupted.) f

The P IN P signals have the same vertical scanning frequency.

f

P IN P combination has signals other than the combination of Interlace signals by Interlace signals.

―: P IN P (picture in picture) combination is not possible

*1

480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24sF, 1080/24p, 1080/25p, 1080/30p, 1080/50p, 1080/60p

*2

VGA (640 x 480) - WUXGA (1 920 x 1 200)

Non-interlace signal, dot clock frequency: 25 MHz to 162 MHz (The WUXGA signal is only compatible with VESA CVT RB (Reduced Blanking) signals.)

*3

Only supports 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24sF, 1080/24p, 1080/25p, 1080/30p, 1080/50p, and 1080/60p

[MENU LOCK PASSWORD] operations

To initialize your password, consult your distributor.

ENGLISH - 147

Chapter 6

Appendix — Technical information

List of compatible signals

The following table speciies the video signals compatible with the projector.

f

Symbols that indicate formats are as follows.

g

V: VIDEO, Y/C g

R: RGB g

Y: YC

B

C

R

/YP

B

P

R g

D: DVI-D g

H: HDMI g

DP: DisplayPort

Mode

NTSC/NTSC4.43/

PAL-M/PAL60

PAL/PAL-N/SECAM

525i (480i)

625i (576i)

525i (480i)

625i (576i)

525p (480p)

625p (576p)

750 (720)/60p

750 (720)/50p

1125 (1080)/60i

*3

1125 (1080)/50i

1125 (1080)/24p

1125 (1080)/24sF

1125 (1080)/25p

1125 (1080)/30p

1125 (1080)/60p

1125 (1080)/50p

VESA400

VGA

SVGA

MAC16

XGA

MXGA

MAC21

Resolution

(Dots)

Scanning freq.

Horizontal

(kHz)

Vertical

(Hz)

720 x 480i 15.7

720 x 576i

720 x 480i

720 x 576i

15.6

15.7

15.6

720 (1440) x 480i

*2

15.7

720 (1440) x 576i

*2

15.6

720 x 483 31.5

720 x 576

1 280 x 720

31.3

1 280 x 720

1 920 x 1 080i

1 920 x 1 080i

45.0

37.5

33.8

28.1

1 920 x 1 080

1 920 x 1 080i

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

1 920 x 1 080

27.0

640 x 400

640 x 400

640 x 480

640 x 480

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

832 x 624

27.0

28.1

33.8

67.5

56.3

37.9

31.5

31.5

35.0

37.9

37.5

43.3

35.2

37.9

48.1

46.9

53.7

49.7

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 152 x 864

1 152 x 864

1 152 x 864

1 152 x 864

1 152 x 870

39.6

48.4

56.5

60.0

64.0

67.5

77.1

68.7

65.5

68.7

81.4

98.8

53.7

59.9

50.0

59.9

50.0

59.9

50.0

59.9

50.0

60.0

50.0

60.0

50.0

24.0

48.0

25.0

30.0

66.7

72.8

75.0

85.0

56.3

60.3

60.0

50.0

85.1

70.1

59.9

72.2

75.0

85.1

74.6

50.0

60.0

70.1

75.0

81.6

85.0

100.0

120.0

60.0

70.0

74.9

85.0

75.1

Dot clock freq.

(MHz)

Format

V

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

V

R/Y

R/Y

D/H

D/H

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

R/Y/D/H/DP

13.5

13.5

27.0

27.0

27.0

27.0

74.3

74.3

74.3

74.3

74.3

74.3

74.3

74.3

148.5

148.5

31.5

25.2

25.2

30.2

31.5

31.5

36.0

36.0

113.3

139.1

81.6

94.2

108.0

119.7

100.0

40.0

50.0

49.5

56.3

57.3

51.9

65.0

75.0

78.8

86.0

94.5

l l l

― l

― l

― l

― l l

― l l l

― l

― l

RGB2

Plug and play

*1

DVI-D

EDID1

EDID2 EDID3

HDMI DP

― ― ― ― ― ― l l l

― l

― l

― l

― l l

― l l l

― l

― l

― l l l l l l l

― l

― l l

― l

― l l l

― l

― l l

― l

― l l

― l

― l l l l l l l

― l

― l l l

― l

― l l l l

― l l

― l

― l l

― l

― l l l l l l l

― l

― l l l

― l

― l l l l

― l l

― l

― l l

― l

― l l l l l l l

― l

― l l l

― l

― l

148 - ENGLISH

Chapter 6

Appendix — Technical information

Mode

1280 x 720

1280 x 768

1280 x 800

MSXGA

SXGA

1366 x 768

SXGA+

WXGA+

1600 x 900

UXGA60

WSXGA+

1920 x 1080

WUXGA

Resolution

(Dots)

1 280 x 1 024

1 366 x 768

1 366 x 768

1 400 x 1 050

1 400 x 1 050

1 400 x 1 050

1 400 x 1 050

1 400 x 1 050

1 400 x 1 050

1 440 x 900

1 600 x 900

1 600 x 900

1 600 x 1 200

1 680 x 1 050

1 680 x 1 050

1 920 x 1 080

1 920 x 1 080

*4

1 920 x 1 080

*6

1 920 x 1 200

1 920 x 1 200

*4

1 920 x 1 200

*6

1 280 x 720

1 280 x 720

1 280 x 720

1 280 x 720

1 280 x 768

1 280 x 768

1 280 x 768

*4

1 280 x 768

1 280 x 768

1 280 x 800

1 280 x 800

1 280 x 800

*4

1 280 x 800

1 280 x 800

1 280 x 960

1 280 x 1 024

1 280 x 1 024

1 280 x 1 024

1 280 x 1 024

1 280 x 1 024

Scanning freq.

Horizontal

(kHz)

Vertical

(Hz)

37.1

44.8

76.3

92.6

39.6

47.8

47.4

60.3

68.6

41.3

49.7

49.3

62.8

71.6

60.0

52.4

64.0

72.3

78.2

80.0

91.1

39.6

47.7

54.1

64.0

65.2

65.3

78.8

82.2

55.9

46.3

55.9

75.0

54.1

65.3

55.6

66.6

67.2

61.8

74.0

74.6

49.8

59.9

100.0

120.0

49.9

59.9

60.0

74.9

84.8

50.0

59.8

59.9

74.9

84.9

60.0

50.0

60.0

66.3

72.0

75.0

85.0

49.9

59.8

50.0

60.0

60.0

60.0

72.0

75.0

60.0

50.0

60.0

60.0

50.0

60.0

49.9

59.9

60.0

49.9

60.0

59.9

Dot clock freq.

(MHz)

60.5

74.5

131.8

161.6

65.3

79.5

68.3

102.3

117.5

68.0

83.5

122.6

121.8

149.3

155.9

106.5

97.0

119.0

71.0

106.5

122.5

108.0

88.0

108.0

125.0

135.1

135.0

157.5

69.0

85.5

99.9

108.0

162.0

119.5

146.3

141.5

138.5

173.0

158.3

154.0

193.3

Format

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R/D/H/DP

R

R/D/H/DP

R/D/H/DP

R l

― l

― l *5

― l

― l

― l

RGB2

Plug and play *1

DVI-D

EDID1

EDID2 EDID3

― ― ―

― l *5

― l *5

HDMI

― l *5

DP

― l *5

― l l l l

― l

― l l

― l

― l

― l l

― l

*7

― l

― l l

― l

*7 l l

― l

*7 l

*1

Signals with l in the Plug and play columns are signals described in EDID (extended display identiication data) of the projector. A signal, which has no l

in the Plug and play columns but has an entry in the Format column, can be input. For signals without l in the Plug and play columns, resolution may not be selected in the computer even though the projector supports them.

*2

Pixel-Repetition signal (dot clock frequency 27.0 MHz) only

*3

When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.

*4

VESA CVT-RB (Reduced Blanking)-compliant

*5 Only for PT-EW730Z

*6

Samples the pixels in the image processing circuit and displays the image.

*7

Only for PT-EZ770Z

Note

f

The number of display dots for PT-EZ770Z is 1 920 x 1 200. The number of display dots for PT-EW730Z is 1 280 x 800. The number of display dots for PT-EX800Z is 1 024 x 768. A signal with a different resolution is converted to the number of display dots.

f

The “i” at the end of the resolution indicates an interlaced signal.

f

When interlaced signals are connected, lickering may occur on the projected image.

f

DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.

ENGLISH - 149

Chapter 6

Appendix — Technical information f

If connecting the projector to a computer that uses an early-type chipset or graphics card compatible with DisplayPort, the projector or computer may not be operated properly when the signal output from DisplayPort on the computer is input to the projector. In such a case, switch off the projector or computer and then switch it on.

If the signal output from DisplayPort is input to the projector, use of the computer equipped with the latest chipset or graphics card is recommended.

150 - ENGLISH

Chapter 6

Appendix — Speciications

Speciications

The speciications of the projector are as follows.

Power supply

Power consumption

LCD panel

AC 100 V - 240 V, 50 Hz/60 Hz

PT-EZ770Z

PT-EW730Z, PT-EX800Z

590 W (6.7 A - 2.5 A)

575 W (6.5 A - 2.4 A)

0.3 W when [STANDBY MODE] is set to [ECO]

10 W when [STANDBY MODE] is set to [NORMAL]

37 W when [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON]

Size

PT-EZ770Z

PT-EW730Z

1.9 cm (0.76") (aspect ratio 16:10)

1.9 cm (0.76") (aspect ratio 16:10)

PT-EX800Z

2.0 cm (0.79") (aspect ratio 4:3)

Display system

Translucent screen LCD panel 3 panels, 3 primary color system

Drive system

Active matrix

Lens *1

Number of pixels

Electric zoom

Electric focus

Luminous lamp

PT-EZ770Z

PT-EW730Z

PT-EX800Z

1.7 - 2.8:1

F = 1.7 - 2.3

f = 26.9 mm - 45.4 mm

400 W, UHM lamp

2 304 000 pixels (1 920 x 1 200 dots) x 3 panels

1 024 000 pixels (1 280 x 800 dots) x 3 panels

786 432 pixels (1 024 x 768 dots) x 3 panels

Light output

Speaker

Outer case

Dimensions

Weight

Noise level

*3

*2*3

Contrast ratio

Color system

*3

Projected image size

Screen aspect ratio

Projection method

Max. effective audio output

Power cord length

Width

Height

Depth

PT-EZ770Z

PT-EW730Z

PT-EX800Z

6 500 lm

7 000 lm

7 500 lm

5 000:1 (when [IRIS] is set to [ON], and [LAMP POWER] is set to [AUTO])

7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)

1.02 m (40") - 10.16 m (400")

PT-EZ770Z, PT-EW730Z

PT-EX800Z

16:10

4:3

[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]

3.7 cm, round, x 1

10 W (monaural)

3.0 m (118-1/8")

Molded plastic

530 mm (20-7/8")

177 mm (6-31/32") (with legs at shortest position)

PT-EZ770Z, PT-EW730Z,

PT-EX800Z

PT-EZ770ZL, PT-EW730ZL,

PT-EX800ZL

PT-EZ770Z, PT-EW730Z,

PT-EX800Z

445 mm (17-17/32") (including standard zoom lens)

385 mm (15-5/32") (excluding optional lens)

Approx. 10.6 k] (23.4 lbs.)

*4

(including standard zoom lens)

PT-EZ770ZL, PT-EW730ZL,

PT-EX800ZL

Approx. 9.8 k] (21.6 lbs.)

37 dB when [LAMP POWER] is set to [NORMAL]

31 dB when [LAMP POWER] is set to [ECO1]

29 dB when [LAMP POWER] is set to [ECO2]

*4

(excluding optional lens)

*1

For PT-EZ770ZL, PT-EW730ZL, PT-EX800ZL, the lens is sold separately.

*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.

*3

Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.

*4

Average value. Weight varies for each product.

ENGLISH - 151

Chapter 6

Appendix — Speciications

Operating environment temperature *1

0 °C (32 °F) - 45 °C (113 °F)

Operating environment

Remote control

Operating environment

10 % - 80 % (No condensation)

humidity

Power supply

DC 3 V (AAA/R03/LR03 battery x 2)

Operating range

Within approx. 30 m (98'5") (when operated directly in front of signal receiver)

Weight

Dimensions

102 ]

(3.6 ozs.) (including batteries)

Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")

*1

When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F).

If the [PROJECTOR SETUP] menu

→ [ECO MANAGEMENT] → [LAMP POWER] is set to [AUTO] or [NORMAL], [LAMP POWER] may be set to

[ECO2] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 °C (95 °F) or higher when using the projector at high altitudes).

r

Applicable scanning frequency

Refer to “List of compatible signals” (x page 148) for the types of video signals that can be used with the projector.

For video signal

For Y/C signal

For RGB signal

For YC

B

C

R

/YP

B

P

For DVI-D signal

For HDMI signal

R

signal

For DisplayPort signal

Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz

Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz

Horizontal: 15 kHz - 100 kHz, Vertical: 24 Hz - 120 Hz

PIAS (Panasonic Intelligent Auto Scanning) system f

Dot clock frequency: 162 MHz or less f

525i (480i)

Horizontal: 15.75 kHz, Vertical: 60 Hz f

525p (480p)

Horizontal: 31.5 kHz, Vertical: 60 Hz f

750 (720)/60p

Horizontal: 45 kHz, Vertical: 60 Hz f

1125 (1035)/60i

Horizontal: 33.75 kHz, Vertical: 60 Hz f

1125 (1080)/50i

Horizontal: 28.13 kHz, Vertical: 50 Hz f

1125 (1080)/24sF

Horizontal: 27 kHz, Vertical: 48 Hz f

1125 (1080)/30p

Horizontal: 33.75 kHz, Vertical: 30 Hz f

1125 (1080)/50p

Horizontal: 56.25 kHz, Vertical: 50 Hz f

625i (576i)

Horizontal: 15.63 kHz, Vertical: 50 Hz f

625p (576p)

Horizontal: 31.25 kHz, Vertical: 50 Hz f

750 (720)/50p

Horizontal: 37.5 kHz, Vertical: 50 Hz f

1125 (1080)/60i

Horizontal: 33.75 kHz, Vertical: 60 Hz f

1125 (1080)/24p

Horizontal: 27 kHz, Vertical: 24 Hz f

1125 (1080)/25p

Horizontal: 28.13 kHz, Vertical: 25 Hz f

1125 (1080)/60p

Horizontal: 67.5 kHz, Vertical: 60 Hz f

The SYNC/HD and VD terminals do not support 3 value SYNC.

525i (480i)

*1

, 625i (576i)

*1

, 525p (480p), 625p (576p), 750 (720)/60p,

750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,

1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,

1125 (1080)/60p, 1125 (1080)/50p f

Displayable resolution: VGA - WUXGA (non-interlaced) f

Dot clock frequency: 25 MHz - 162 MHz

525i (480i)

*1

, 625i (576i)

*1

, 525p (480p), 625p (576p), 750 (720)/60p,

750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,

1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,

1125 (1080)/60p, 1125 (1080)/50p f

Displayable resolution: VGA - WUXGA (non-interlaced) f

Dot clock frequency: 25 MHz - 162 MHz

525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,

1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,

1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,

1125 (1080)/60p, 1125 (1080)/50p f

Displayable resolution: VGA - WUXGA (non-interlaced) f

Dot clock frequency: 25 MHz - 162 MHz

*1

Pixel-Repetition signal (dot clock frequency 27.0 MHz) only

Note

f

DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.

152 - ENGLISH

Chapter 6

Appendix — Speciications

r Terminal

<RGB 1 IN> terminal

<RGB 2 IN> terminal

1 set, high-density D-Sub 15 p (female)

RGB signal

0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)

SYNC/HD

TTL high impedance, automatic positive/negative polarity compatible

VD

TTL high impedance, automatic positive/negative polarity compatible

YP

B

P

R

signal

Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

1 set (BNC x 5 (RGB/YP

B

P

R

/YC

B

C

R

/YC/VIDEO x 1))

RGB signal

0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)

SYNC/HD

TTL high impedance, automatic positive/negative polarity compatible

VD

TTL high impedance, automatic positive/negative polarity compatible

<MONITOR OUT> terminal

<DVI-D IN> terminal

<HDMI IN> terminal

<VIDEO IN> terminal

<DisplayPort IN> terminal

YP

B

P

R

signal

Y/C signal

Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω

Video signal

Y: 1.0 V [p-p] 75 Ω

1 set, high-density D-Sub 15 p (female)

RGB signal

0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)

SYNC/HD TTL high impedance, positive/negative polarity

VD TTL high impedance, positive/negative polarity

YP

B

P

R

signal

Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible

1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible

Audio signal

Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)

1 set, pin jack 1.0 V [p-p] 75 Ω

1 set, DisplayPort 20 pin, HDCP compatible

Audio signal

Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)

<AUDIO IN 1>/<AUDIO IN 2> terminals

1 set each, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more

<AUDIO IN 3> terminal

<VARIABLE AUDIO OUT> terminal

1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more

1 set, M3 stereo mini jack (monitor output, stereo compatible)

0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less

<SERIAL IN> terminal

<REMOTE 1 IN> terminal

D-Sub 9 p, 1 set, RS-232C compliant, for computer control

M3 stereo mini jack cable, 1 set, for remote control (wired)

<REMOTE 2 IN> terminal

1 set, D-Sub 9 p, for external control

<DIGITAL LINK/LAN> terminal

1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX

Note

f The model numbers of accessories and optional accessories are subject to change without prior notice.

ENGLISH - 153

Dimensions

Unit: mm

Chapter 6

Appendix — Dimensions

225.5 (8-7/8")

265 (10-7/16")

451 (17-3/4")

530 (20-7/8")

* The above dimensions are obtained when the standard zoom lens is attached.

*

Dimensions vary for each product.

281.9 (11-3/32")

154 - ENGLISH

Chapter 6

Appendix — Precautions for Ceiling Mount Bracket

Precautions for Ceiling Mount Bracket

f

When installing the projector to a ceiling, be sure to use the speciied optional Ceiling Mount Bracket (Model No.: ET-PKE200H (for High

Ceilings), ET-PKE200S (for Low Ceilings), ET-PKE200B (Projector Mount Base)). Ceiling Mount Bracket (Model No.: ET-PKE200H (for High

Ceilings), ET-PKE200S (for Low Ceilings)) is used in combination with Ceiling Mount Bracket (Model No.: ET-PKE200B (Projector Mount

Base)).

f

When installing the projector, attach the drop-prevention wire supplied with the Ceiling Mount Bracket (Model No.: ET-PKE200B (Projector

Mount Base)).

f

Ask a qualiied technician to do the installation work such as mounting the projector on the ceiling.

f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by

Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.

f

Unused products must be removed promptly by a qualiied technician.

f

Use a torque screwdriver or Allen torque wrench to tighten bolts to their speciied tightening torques. Do not use electric screwdrivers or impact screwdrivers.

f

Read the Installation Instructions for the Ceiling Mount Bracket for details.

f The model numbers of accessories and optional accessories are subject to change without prior notice.

Bottom view

Model No. of Ceiling Mount Bracket: ET-PKE200H (for High Ceilings)

ET-PKE200S (for Low Ceilings)

ET-PKE200B (Projector Mount Base)

M6

12 mm (15/32")

Torque: 4 ± 0.5 N·m

ENGLISH - 155

Index

Index

A

<ASPECT> button

<AUTO SETUP> button

B

C

D

E

F

22

61, 74

70

26

78

78

84

74

20

75

77

31

125

I

<FUNCTION> button

Adjusting adjustable feet

Adjusting the volume

G

Air ilter unit compartment

H

<HDMI> button

[AUDIO SETTING]

Automatic setup function

Remote control

<ID SET> button

54

57

94

80

26

26, 30

98

Projector body

[PROJECTOR ID]

[PROJECTOR SETUP]

[P-TIMER]

<P-TIMER> button

26

R

<REMOTE 1 IN> terminal

Initial setting

[BRIGHTNESS]

N

O

P

Projector body

75

Installation mode

Cautions when installing

Cautions when transporting

Ceiling Mount Bracket

[CLOCK PHASE]

[CLOSED CAPTION SETTING]

[COLOR]

[COLOR CORRECTION]

[COLOR TEMPERATURE]

Connecting the power cord

Connection

[CONTRAST]

[CONTROL DEVICE SETUP]

Crestron RoomView

<MENU> button

67

28

89

28

148

98

60

27, 48

131

S

T

V

Z

88

104

75

2

103

[RGB IN]

[RS-232C]

[KEYSTONE]

<KEYSTONE> button

63, 106

106

Selecting the input signal

<SERIAL IN> terminal

[SERVICE PASSWORD]

Setting the ID number of the remote control

Setting up

Main power switch

Maintenance

Projector body

Remote control

Menu item

29

<REMOTE 2 IN> terminal

[REMOTE2 MODE]

Remote control

Remote control operations

Removing/attaching the Projection Lens

103

134

Resetting values to factory defaults

26, 53

92, 142

98

[SCHEDULE]

[SCREEN SETTING]

Security

[SECURITY]

[SECURITY PASSWORD]

[SECURITY PASSWORD CHANGE]

99

[SHARPNESS]

70

<DEFAULT> button

97

68

Remote control

104

[DIGITAL CINEMA REALITY]

[DIGITAL INTERFACE BOX]

<DIGITAL LINK> button

20

26, 53

[DIGITAL LINK IN]

[DIGITAL LINK MODE]

[DIGITAL LINK SETUP]

110

[DIGITAL ZOOM]

Dimensions

Display language

62, 77

61

107

59

[NETWORK]

Network connections

[NETWORK CONTROL]

110

[NETWORK STATUS]

67

90

<SHUTTER> button

Projector body

Remote control

[MENU LOCK]

107

<MUTE> button

26

<SHIFT> button

26, 51

<STATUS> button

26, 53

[SIGNAL LIST]

Speciications

69

[STANDBY MODE]

[STARTUP INPUT SELECT]

[STARTUP LOGO]

96

26, 57

105

49

Switching on the projector

53

68

62, 76

[DISPLAY OPTION]

<DisplayPort> button

<DVI-D> button

26, 53

[DisplayPort IN]

107

Disposal

26, 53

80

On-screen menu

[DVI-D IN]

<D.ZOOM> button

26

81

23

129

62, 102

[TEXT CHANGE]

65

Troubleshooting

<ECO> button

<ENTER> button

89

Projector body

26

103

61, 64

64

[P IN P]

Remote control

[POSITION]

Power on button

62, 100

26

100

<VOL-> button

P IN P function

61, 70

<VIDEO> button

<VOL+> button

26, 53

28

26

Projector body

Filter indicator

<FOCUS> button

26, 51

86

<FREEZE> button

26, 54

28

Remote control

Precautions for Ceiling Mount Bracket

18

51

28

26

<VOL->/<VOL+> button

54

[ZOOM]

<ZOOM> button

Projecting

156 - ENGLISH

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the

Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Panasonic Corporation

Web Site : http://panasonic.net/avc/projector/

© Panasonic Corporation 2013 W

1113TI0 -YI

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents