Siqura FD1103M1 EI IP outdoor fixed dome camera Quick Start Guide

The Siqura FD1103M1 EI is an IP outdoor fixed dome camera with IR, offering a variety of features to enhance your security needs. It's designed for easy installation and integrates with Siqura’s Device Manager for seamless network management. This guide will help you unpack and connect your camera, setting it up for optimal performance.

PDF Download

Document

Hello! I am an AI chatbot specifically trained to assist you with the Siqura FD1103M1 EI IP outdoor fixed dome camera Quick Start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

3 MP resolution
IR night vision
SD card storage
PoE support (802.3af)
Siqura Device Manager compatibility
Fixed IP and DHCP setup options
Side conduit for cable management

Frequently asked questions

Press and hold the reset button for 10 seconds while powering on or rebooting the camera.

The camera supports up to 128 GB Micro SD/SDHC/SDXC cards.

There are three adjustments to make: (1) Pan: Rotate the camera left/right. (2) Tilt: Move the camera up/down. (3) Rotate: Position the lens to the desired angle.

You can use Siqura Device Manager to discover the camera on the network and then change its IP address via the software.