Gear oils for passenger cars and commercial vehicles

Gear oils for passenger cars and commercial vehicles
High-tech safety for gearboxes
Gear oils for passenger cars
and commercial vehicles
Gear oils for passenger cars.
For problem-free operation over the entire life of
the vehicle, passenger car gearboxes today need
high-performance lubricants which protect against
wear and significantly increase shifting comfort. In
addition, extending oil change intervals up to the
life of the vehicle make considerable demands on
the quality of the oils.
As the long-term development partner of the
world’s leading gearbox manufacturers, we
operate at the leading edge of technology.
For quality and reliability.
Use FUCHS.
The information contained in this product
information is based on the experience and
know-how of FUCHS EUROPE SCHMIERSTOFFE
GMBH in the development and manufacturing of lubricants and represents the current
state-of-the-art. The performance of our
products can be influenced by a series of
factors, especially the specific use, the method
of application, the operational environment,
component pre-treatment, possible external
contamination, etc. For this reason, universally
valid statements about the function of our
products are not possible. The information
given in this product information represents
general, non-binding guidelines. No warranty
expressed or implied is given concerning the
properties of the product or its suitability for
any given application.
We therefore recommend that you consult
a FUCHS application engineer to discuss
application conditions and the performance
criteria of the products before the product
is used. It is the responsibility of the user to
test the functional suitability of the product
and to use it with the corresponding care.
Our products undergo continuous improvement. We therefore retain the right to change
our product program, the products, and their
manufacturing processes as well as all details
of our product information sheets at any time
and without warning. With the publication of
this product information, all previous editions
cease to be valid.
Any form of reproduction requires express
prior written permission from FUCHS EUROPE
SCHMIERSTOFFE GMBH.
© FUCHS EUROPE SCHMIERSTOFFE GMBH.
All rights reserved. Edition 01/2016.
TITAN SINTOFLUID –
for passenger car
manual gearboxes
TITAN SINTOPOID –
for passenger car
differentials
SINTOFLUID FE
SAE 75W
Premium, low viscosity, gear oil offering increased gearbox
efficiency. Reduces fuel consumption and offers excellent low
temperature performance. Suitable as “fill for life“ fluid
according to manufacturer recommendations.
Specifications*:
API GL-4
Approvals*:
–
FUCHS recommendations:
VW TL 521 71
(G 052 171 A1/A2)
VW TL 521 78 (G 052 178 A2),
VW TL 525 12 (G 052 512 A2),
VW TL 525 27 (G 052 527 A2),
VW TL 726
(G 052 726 A2/ G 055 726 A2/
G 060 726 A2/ G 070 726 A2)
SINTOFLUID
SAE 75W-80
Premium gear oil for passenger cars offering good gearbox
efficiency. Good cold start behaviour. Suitable as fill-for-life
fluid according to manufacturer.
Specifications*:
API GL-5
Approvals*:
–
FUCHS recommendations:
MIL-L-2105 D
ALFA ROMEO
BMW 83 22 0 309 031
BMW 83 22 0 403 247
BMW 83 22 7 533 818
BMW 2300 1434 404
BMW 2300 7533 513
BMW 2300 7533 818
CITROËN
FIAT
FORD M2C200-C/ C2/ C3
LANCIA
OPEL 19 40 182,
19 40 757, 19 40 768, 19 40 776
PEUGEOT
RENAULT
VOLVO 97308
VW 501 50
(G 005 000 05/ G 005 000/
G 005 000 20/ G 052 911 A1/A2)
SINTOPOID FE
SAE 75W-85
Premium, low viscosity, gear oil offering increased gearbox
efficiency formulated from fully-synthetic base oils. Reduces
fuel consumption and offers excellent low temperature
performance. Suitable as “fill for life“ fluid according to
manufacturer recommendations.
Specifications*:
API GL-5
Approvals*:
MB-APPROVAL 235.7
ZF TE-ML 18
FUCHS recommendations:
ALFA ROMEO
BMW
FIAT
LANCIA
VW TL 521 45-X (G 052 145 A1)
VW TL 521 90 (G 052 190 A2/
G 055 190 A2)
SINTOPOID
SAE 75W-90
Premium gear oil for passenger cars offering good gearbox
efficiency. Suitable for high-offset hypoid drives. Suitable as
fill-for-life fluid according to manufacturer.
Specifications*:
API GL-5
Approvals*:
–
FUCHS recommendations:
MIL-L-2105 D
BMW
VW TL 521 45-Y
(G 052 145 A2)
SINTOPOID LS
SAE 75W-90 / 75W-140
Premium gear oils for axles, transfer boxes, formulated
from fully synthetic base oils. Both offer excellent low
temperature performance. Suitable for differentials with or
without limited slip. SINTOPOID LS 75W-90 can be used as a
rationalisation grade due to its wide specification profile.
Specifications*:
SINTOPOID LS
SAE 75W-90:
API GL-4/-5/-5 incl. LS
SINTOPOID LS
SAE 75W-140:
API GL-5
Approvals*:
–
FUCHS recommendations:
SINTOPOID LS
SAE 75W-90:
VW G50 / G51
SINTOPOID LS
SAE 75W-140:
BMW 83 22 2 282 583, 83 22 9 407 870
CHRYSLER MS-8985
FORD M2C192-A, GM 12346140
JOHN DEERE JDM J 11 G
SCANIA STO 1:0
Gear oils
for mixed fleets.
FUCHS has developed special gear oils for use in
cars, vans and trucks.
Reduces the chance of incorrect filling.
Reduces stock levels and complexity.
Ultimately reduces operating costs.
Choose FUCHS rationalisation products.
Reduce your operating
costs: By using mixed
fleet products.
SUPERGEAR MC
SAE 80W-90
Super high-performance gear oil based on MC-synthesis
technology for extended oil change intervals.
Specifications*:
API GL-4/GL-5
SCANIA STO 1:0
Approvals*:
MAN 341 TYPE E2
MAN 341 TYPE Z2
MAN 341 TYPE M2
MB-APPROVAL 235.0
ZF TE-ML 02B, 05A, 12L, 12M,
16B, 17B, 19B, 21A
FUCHS recommendations:
CASE MS 1316
FORD M2C197-A
JOHN DEERE JDM J 11 E
MAN M3343 TYPE M
NH 520 A
SDFG OP 1705
STEYR B-101
VOLVO 97310
ZF TE-ML 07, 08
SUPERGEAR MC
SAE 80W-140
Super high-performance gear oil based on MC-synthesis
technology for extended oil change intervals.
Specifications*:
API GL-4/GL-5
SCANIA STO 1:0
Approvals*:
–
FUCHS recommendations:
JOHN DEERE JDM J 11 E
OPEL 19 42 386
RENAULT VI
VOLVO 97310
ZF TE-ML 08
GEAR LS
SAE 90
High-performance LS (Limited Slip) hypoid gear oil for axles
in commercial vehicles and passenger cars with or without
limited slip differentials.
Specifications*:
API GL-5
Approvals*:
ZF TE-ML 05C, 12C, 16E, 21C
FUCHS recommendations:
MIL-L-2105 D
FORD M2C104-A
JOHN DEERE JDM J 11 F
LIEBHERR
NH 520 B
VOLVO 97310
GEAR MP
SAE 80
High-performance gear oil for synchronized and non-synchronized
manual gearboxes as well as auxiliary drives, axles and
differentials in certain commercial vehicles and passenger cars.
Specifications*:
API GL-4
Approvals*:
MAN 341 TYPE E1
MAN 341 TYPE Z2
MB-APPROVAL 235.1
ZF TE-ML 17A
FUCHS recommendations:
BMW 81 22 9 407 052
BMW 81 22 9 407 053
EATON
FORD M2C9008-A
VW TL 726
ZF TE-ML 08
GEAR MP
SAE 90
High-performance gear oil for synchronized and non-synchronized
manual gearboxes as well as auxiliary drives, axles and
differentials in certain commercial vehicles and passenger cars.
Specifications*:
API GL-4
Approvals*:
–
FUCHS recommendations:
EATON
FULLER
MB 235.1
MAN 341 TYPE E1, Z1
ZF TE-ML 02A, 16A, 17A, 19A
GEAR HYP
SAE 90
High-performance gear oil for highly-stressed differentials
in commercial vehicles and passenger cars.
Specifications*:
API GL-5
Approvals*:
MAN 342 TYPE M1
MB-APPROVAL 235.0
ZF TE-ML, 16C, 17B, 19B, 21A
FUCHS recommendations:
FORD M2C9102-A
JOHN DEERE JDM J 11 E
OPEL 19 42 387
VOLVO 97310
VW TL 727
ZF TE-ML 07, 08
Gear oils
for trucks.
Commercial vehicle gearboxes are subject to
all sorts of loads. Urban driving puts different
demands on the gearbox and its oil than longdistance haulage. Perfect and reliable operation
of is a must - down time can be very expensive
and inconvenient - the gear oil must be perfectly
matched to the gearbox and axles and its
performance requirements. Make no compromises.
Rely on the leading OEM supplier, FUCHS.
Heavy-duty gear oils for
heavy-duty applications.
Never make compromises
in the commercial sector.
CYTRAC SL
SAE 75W-90
Premium gear oil for highly-stressed hypoid axles in commercial
vehicles formulated with fully-synthetic base oils. Developed for
extended oil change intervals in commercial vehicle axle drives.
Specifications*:
API GL-5
SCANIA STO 1:0
Approvals*:
MAN 342 TYPE S1
FUCHS recommendations:
JOHN DEERE JDM J 11 E/G
VOLVO 97312
ZF TE-ML 07, 08, 05B, 12B, 16F, 17B
MB 235.8
CYTRAC MB SYNTH
SAE 75W-90
Premium gear oil for extended drain intervals in commercial
vehicles, specially developed for Mercedes-Benz Actros.
Formulated with fully-synthetic base oils. Reduces
fuel consumption by improving gearbox efficiency. Suitable
for extended oil change intervals.
Specifications*:
API GL-4
FUCHS recommendations:
ZF TE-ML 08
Approvals*:
MAN 341 TYPE MB
MB-APPROVAL 235.11
CYTRAC MAN SYNTH
SAE 75W-80
Premium gear oil for extended drain intervals in commercial
vehicles manual gearboxes, specially developed for manual
and automatic ZF-gearboxes. Formulated with fully-synthetic
base oils. Reduces fuel consumption by improving gearbox
efficiency. Suitable for extended oil change intervals.
Specifications*:
API GL-4
Approvals*:
MAN 341 TYPE Z4
ZF TE-ML 01L 02L, 16K
FUCHS recommendations:
DAF
EATON
IVECO
RENAULT
VOLVO 97307
CYTRAC LD
SAE 75W-80
Ultra high-performance gear oil for extended oil change
intervals in commercial vehicles fitted with integral intarders
or supplementary retarders.
Specifications*:
API GL-4
Approvals*:
EATON
MAN 341 TYPE E3
FUCHS recommendations:
DAF
MAN 341 TYPE Z3
VOLVO 97305
ZF TE-ML 02D, 08
CYTRAC HSY
SAE 75W-90
Ultra high-performance gear oil for commercial vehicle manual
transmissions and axle drives formulated with fully-synthetic
base oils.
Specifications*:
API GL-4/GL-5
Approvals*:
ZF TE-ML 05B, 12L, 12N, 16F,
17B, 19C, 21B
FUCHS recommendations:
DAF
MAN 341 TYPE Z2/E3
MAN 342 TYPE M3
MAN M 3343 TYPE S
JOHN DEERE JDM J 11 E/G
SCANIA STO 1:0
ZF TE-ML 07
GEAR HYP LD
SAE 80W-90
Super high-performance axle oil specially developed for
Mercedes-Benz commercial vehicles. Offering enhanced
thermal stability and fuel-economy potential.
Specifications*:
API GL-5
API MT-1
Approvals*:
MAN 342 TYPE M3
MB-APPROVAL 235.20
ZF TE ML 05A, 12L, 12M, 16B,
17B, 19B, 21A
FUCHS recommendations:
MIL-PRF-2105 E
ARVIN MERITOR AXLES
MACK GO-J
JOHN DEERE JDM J 11 E
SCANIA STO 1:0
ZF TE-ML 07A
How to find the right gear oil
API Classifications
The American Petroleum Institute (API) created a classification system for gear oils
based on application conditions and the type of gears most commonly used. The
presence of frictional systems such as clutches or synchromesh rings in gearboxes
as well as sealing material compatibility or component wear are not considered.
API gear oil classifications are now internationally recognised and used.
API
Application conditions
Gearbox type
GL-4
high rotational speed/low torque or
low rotational speed/high torque,
limited sliding portion
highly loaded manual gearboxes,
mild hypoid axle drives, moderate
axle off-sets
GL-5
high rotational speed and
shock-loading, high rotational
speed/low torque or low-rotational
speed/high torque
hypoid axle drives, highly loaded
drives with large axle off-sets, very
highly loaded manual transmissions
MT-1
valid!
spur gear, dog-engaged gearboxes
non-synchromesh manual transmissions
US Military Specifications
The US Military authorities have created their own gear oil specifications which
are sometimes also used for civilian application
MIL
Specification
Status
API
Performance
SAE
Grades
MIL-L-2105 B
Introduced in 1962. Superseded by
MIL-L-2105 C.
API GL-5
SAE 80
SAE 90
SAE 140
MIL-L-2105 C
Introduced in 1976. Superseded by
MIL-L-2105 D.
API GL-5
SAE 75W
SAE 80W-90
SAE 85W-140
MIL-L-2105 D
Introduced in the 2nd half 1987.
API GL-5
SAE 75W
SAE 80W-90
SAE 85W-140
MIL-PRF-2105 E
Introduced in 1997: As MIL-L-2105
D with additional suitability for
non-syncromesh, manual gearboxes.
Replaces A-D
API GL-5
API MT-1
SAE 75W
SAE 80W-90
SAE 85W-140
SAE J2360
Civil version of MIL-L-2105 E.
see above
see above
Approvals by manufacturers
MACK
Application area
GO-H
GO-J
GO-J Plus
TO-A Plus
Axle oils, e.g. SAE 90, SAE 140, SAE 80W-90 and SAE 85W-140
Gear oil, axle oil, normal drain interval
(up to 250,000 miles/3 years on highway operation)
Gear oil, axle oil, extended drain interval
(up to 500,000 miles/3 years on highway operation)
Manual transmission fluid (MTF), e.g. SAE 50, extended drain
interval (up to 500,000 miles/3 years on highway operation)
Approvals by manufacturers
MAN
Application area
M 3343 M
M 3343 S
MAN 341 Z1
MAN 341 Z2
MAN 341 Z3
MAN 341 Z4
MAN 341 Z5
MAN 341 E1 MAN 341 E2 MAN 341 E3 MAN 341 E4 MAN 341 ZE
MAN 341 VR
MAN 341 MB
MAN 342 M1
MAN 342 M2
MAN 342 M3
MAN 342 S1
Multifunctional oil, mineral oil-based, extended drain intervals
Multifunctional oil, synthetic, extended drain intervals
MTF, mineral oil-based, normal drain intervals
MTF, mineral oil-based, extended drain intervals
MTF, semi-synthetic, extended drain intervals
MTF, synthetic, more extended drain intervals
MTF, synthetic, maximum drain intervals
MFT, mineral oil-based, normal drain intervals
MFT, mineral oil-based, extended drain intervals
MFT, semi-synthetic, extended drain intervals
MFT, synthetic, more extended drain intervals
MTF for ZF Ecomid/Ecosplit
MTF for VOITH retarders
MTF for Mercedes-Benz manual transmissions in buses
Axle oil, mineral oil or semi-synthetic, normal drain intervals
Axle oil, mineral oil or semi-synthetic, extended drain intervals
Axle oil, mineral oil or semi-synthetic, more extended drain intervals
Axle oil, synthetic, maximum drain intervals
MB-sheet
Application area
MB 235.0
MB 235.1
MB 235.4
MB 235.5
MB 235.6
MB 235.7
MB 235.8
MB 235.10
MB 235.11
MB 235.12
MB 235.13
MB 235.15
MB 235.20
MB 235.27
MB 235.28
MB 235.29
MB 235.61
SCANIA
Hypoid gear oils SAE 85W-90, SAE 90
Gear oils SAE 80, 80W/85W
Synthetic gear oils SAE 75W/85W
Gear oils SAE 80, 80W/85W
Hypoid gear oils SAE 85W-90, SAE 90
FE-hypoid gear oils SAE 85W-90
Hypoid gear oils SAE 75W-90
MTF
FE-MTFs for extended drain intervals
Manual gearbox oils SAE 30, 40
Fully-synthetic manual gearbox oils
Hypoid gear oils SAE 75W-85
Mineral axle oils, LD, SAE 80W-90
Retarder oils NFZ, category voith A
Retarder oils NFZ, category voith B
Retarder oils NFZ, category voith C
Hypoid gear oils, AMG
STO 1:0
STO 2:0A
Axle Oil acc. to GL-5 for use in SCANIA manual transmissions,
transfer cases and rear axles.
Axle Oil acc. to SAE J 2360 for use in SCANIA manual transmissions,
transfer cases and rear axles. Improved shear and oxidation
stability and fuel efficiency potential. Increased drain interval
up to 540,000 km (proven in field test).
VOLVO
Application area
97303 97305
97307
97308
97310
97312
97315
Multifunctional oil for wet brake systems, WB 101, UTTO
Manual transmission oil, transfer case oil, GL-4, SAE 80W-90
Manual transmission oil, extended drain intervals, GL-4
Special synthetic manual transmission oil, GL-4
Gear oil for heavy rear axles, GL-5
Gear oil for heavy rear axles, extended drain intervals,GL-5
Fully-synthetic manual transmission oil, more extended drain intervals,GL-4
ZF
Application area
TE-ML 02
TE-ML 03
TE-ML 05
TE-ML 06
TE-ML 07
TE-ML 11
TE-ML 12
TE-ML 13
TE-ML 16
TE-ML 17
TE-ML 18
TE-ML 19
TE-ML 21
Manual and automatic transmissions for commercial vehicles Converter transmissions for off-road equipment
Axles for off-road vehicles Tractor transmissions and hydraulic lifts
Hydrostatic-mechanical and electric drive systems
Manual and automatic transmissions for cars
Axles for commercial vehicles and buses
ZF assemblies in special purpose vehicles
Transmissions for rail vehicles
Transmissions and axles for lift-trucks
Axles for cars
Transfer and offset transmissions for commercial vehicles
Tractor axles, transmissions for harvesters and final drives.
Application area
Contact:
0116
FUCHS LUBRICANTS (UK) PLC
New Century Street,
Hanley, Stoke-on-Trent,
ST1 5HU
Phone: +44 (0)1782 203 700
Email:[email protected]
www.fuchslubricants.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement