AKRAPOVIC 90505979000, 90505999000 Slip-on silencer User Manual

Below you will find brief information for Slip-on silencer 90505979000, Slip-on silencer 90505999000. This manual provides instructions on how to install the slip-on silencer on your motorcycle. It also covers important safety information and maintenance tips. The manual explains how to mount the silencer, align the entire exhaust system, and tighten all screws. It also includes information about the use of special parts, such as the cat and the retaining brackets. The manual also includes information about the use of special tools and parts that you will need to install the slip-on silencer.

PDF Download
Document
AKRAPOVIC Slip-on silencer 90505979000, 90505999000 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Slip-on exhaust silencer
  • Designed for sports activities
  • Tested under racing conditions
  • Includes installation instructions
  • Requires special mounting kit
  • May necessitate drilling and threading
  • Requires alignment and tightening of screws
  • Includes instructions for post-installation work
  • Includes maintenance and cleaning advice
  • Includes information about spare parts

Frequently asked questions

The manual instructs to keep the engine rpm low for the first 5 minutes to evenly heat the main silencer. This is to ensure that the rock wool insulation reaches its full effectiveness and maintains the required noise level.

No, the adapter for the lifting equipment (61029955244) cannot be installed on the right side in combination with the AKRAPOVIC main silencer due to a risk of collision between the adapter and the silencer.

No, the rear crash pads (90110945000) cannot be installed on the right side in combination with the AKRAPOVIC main silencer due to a risk of collision between the crash pads and the silencer.
Preparing document for printing…
0%