Product Specification

Product Specification
Product Specification
i
i
Integral M.2 SATA 6Gbps 22x60
128
GB
The Integral M.2 next generation form factor
SATA 6Gbps MLC SSD delivers all of the
advantages of flash memory technology for
SATA based computers.
M.2 SATA SSD storage solutions are designed for
Notebooks, Desktops, Ultrabooks and tablets.
They address the need for more low powered
compact
storage
without
compromising
performance and reliability of solid state drives.
FEATURES
• M.2 2260 form factor with SATA III 6Gbps interface (backwards
compatible with SATA 3Gbps and SATA 1.5Gbps)
• Supports ‘M’ & ‘B’ Key sockets
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency
• Fully compatible with devices and OS that support the SATA
standard with M.2 M and B connectors
• Non-volatile Flash Memory for outstanding data retention –
Less likely to fail than HDD
• Ultra-efficient Block Management and Static and Dynamic
Wear Leveling
• Lower Power Consumption
Rev:3
• Shock resistance – No moving parts enable the product to be
used in tougher conditions
• Silent operation - Noiseless and low heat dissipation
• Supports S.M.A.R.T. — Self-Monitoring, Analysis and Reporting
Technology
• Supports TRIM
• RoHS compliant
• CE and FCC tested
• 3 Year Warranty
Product Specification
i
PERFORMANCE Sequential Speed (up to)
128GB
Read
530MB/s (up to)*
Write
430MB/s (up to)*
Interface
NAND
MLC
M.2 22x60 ‘M’ & ‘B’ Key
connector
M.2 (previously known as Next
Generation Form Factor (NGFF))
POWER CONSUMPTION
Supply Voltage
3.3V
Read : 128G = 1640
Power Consumption (mA)
Write : 128G = 1480
Idle = <310
ECC algorithm
Supports 72bit ECC correct per
1K Byte
MTBF
>1 Million Hours
ENVIRONMENTAL
Operating Temp
0° to +70°C
Storage Temp
-40° to +85°C
Humidity
RH 90% under 40C in operation
Supports SMART Software
Yes
Supports TRIM
Yes (OS support required)
Compliancy
CE, FCC, RoHS
DIMENSIONS
Length
60mm
Width
22mm
Height
3.8mm
Weight
5g
Length (Packed)
120mm
Width (Packed)
64mm
Height (Packed)
8mm
Weight (Packed)
13g
WARRANTY
3 years
*Based on internal testing
Rev:3
128GB
PART CODE
INSSD128GM.26M2260
BARCODE (EAN)
5055288427709
This device should not be used as your sole backup.
SATA III 6Gbps
Also Compatible with SATA II
3Gbps and SATA 1.5Gbps
Standard
CAPACITY
1GB = 1,000,000,000 bytes. Formatted capacity is less.
INTERFACE
Form Factor
i
Product design and specification subject to change or modification without notice. E&OE.
All trademarks acknowledged.
For warranty information please visit www.integralmemory.com/warranty
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement