General Description
DIVISION 12 00 00
SECTION 12 93 00
SECTION 12 93 43
SECTION 12 93 43.13
FURNISHINGS
SITE FURNISHINGS
SITE SEATING AND TABLES
SITE SEATING
CORDIA LITTER & RECYCLING RECEPTACLE
Part 1 General
01. Summary
A. Section Includes:
1. Litter and Recycling Receptacle, 36-gallon.
02. Submittals
A. Provide submittals in accordance with Section 01 33 00 – Submittal Procedures.
B. Product data:
1. Manufacturer’s standard product literature.
2. Shop drawings.
3. Installation instructions.
4. Maintenance instructions.
C. Submit powdercoat finish samples for approval.
03. Quality Assurance
A. Manufacturer Qualifications:
1. Minimum 15 years experience in the manufacture of litter and recycling receptacles.
2. Forest Stewardship Council (FSC) Certified Supplier. Provide manufacturer’s FSC certification
number.
3. Provide reference list of at least ten major transportation authorities, municipalities,
universities, or
other high-use public environments currently using litter and recycling receptacles fabricated by
the manufacturer.
04. Delivery, Storage, and Handling
A. Handle products in accordance with manufacturer’s instructions.
B. Store products in manufacturer’s original packaging until ready for installation.
C. Protect products from impacts and abrasion during storage.
05. Warranty
A. Provide manufacturer’s standard warranty:
1. Warranty terms: one year from date of invoice against defects in materials and workmanship.
Part 2 Products
a. Manufacturer
A. Basis-of-design product: provide receptacles based on the product named:
1. Cordia Receptacle by Forms+Surfaces.
2. Manufacturer Contact:
Forms+Surfaces
30 Pine Street
Pittsburgh, PA 15223
phone: 800-451-0410
fax: 412-781-7840
email: [email protected]
website: www.forms-surfaces.com
B. Receptacles
1. Materials:
a. Body frame, lid, and optional rain cover: corrosion-resistant aluminum.
b. Container walls: corrosion-resistant aluminum.
c. Container wall inset material (Choose one below):
1) FSC 100% Jatoba hardwood slats (FSC License Code: FSC-C004453).
2) Aluminum.
2. Finishes
a. Body frame, and lid (Choose one below):
1) Aluminum Texture.
2) Argento Texture.
3) Slate Texture.
4) Other color as specified.
b. Insets (Choose one below):
1) FSC 100% Jatoba hardwood slats.
2) Aluminum inset, Aluminum Texture powdercoat.
3) Aluminum inset, Argento Texture powdercoat.
4) Aluminum inset, Slate Texture powdercoat.
5) Aluminum inset, other color as specified.
c. Rain cover (optional): polyester powdercoat to match lid and body.
3. Latch (Choose one below):
1) Standard lift latch.
2) Tool-operated security latch.
4. Dimensions (Choose model below):
a. Single-Stream receptacle:
1) 36-gallon, top opening, freestanding, without rain cover: 22.1" wide x 22.1" deep x 35.2"
high
2) 36-gallon, top opening, surface mount, without rain cover: 22.1" wide x 22.1" deep x 35.2"
high
3) 36-gallon, side opening, freestanding, with rain cover: 22.1" wide x 22.1" deep x 43.4"
high
4) 36-gallon, side opening, surface mount, with rain cover: 22.1" wide x 22.1" deep x 43.4"
high
b. Split-Stream receptacle:
1) 36-gallon, top opening, freestanding, without rain cover: 22.1" wide x 22.1" deep x 35.2" high
2) 36-gallon, top opening, surface mount, without rain cover: 22.1" wide x 22.1" deep x 35.2"
high
3) 36-gallon, side opening, freestanding, with rain cover: 22.1" wide x 22.1" deep x 43.4"
high
4) 36-gallon, side opening, surface mount, with rain cover: 22.1" wide x 22.1" deep x 43.4"
high
5. Instructional Graphics:
a. Apply instructional graphics to receptacles, as specified, to indicate the intended waste or
recycling stream.
1) Graphics type:
1. Hardwood inset: back-printed acrylic.
2. Aluminum inset: back-printed polycarbonate.
2) Letters and symbols color: White.
3) Graphics background colors:
1. Black.
2. Blue.
3. Green.
6.
Installation (Select one below):
a. Freestanding (provide levelers when freestanding is specified).
b. Surface mount (provide anchors, levelers, and stainless steel mounting screws when surface mount
is specified).
Part 3 Execution
01. Examination
A. Verify that substrates are stable and capable of supporting the weight of items covered under this
section.
B. Verify that substrates have been adequately prepared to securely anchor those items that will be
surface
mounted.
02. Installation
A. Install according to the manufacturer’s installation instructions.
B. Install in conformance to applicable ADA guidelines and End User’s established Accessibility
policies.
END OF SECTION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement