Jastek 250W Wire Binding Machine The Jastek 250W Wire Binder is designed for punching and closing both 3:1 and 2:1 pitch wire. It is capable of simultaneous Punch and Bind. It features a double handle to reduce amount of punching force required and comes with the wire size selector and micro adjuster for exact closing of wire. Machine Features Designed for punching and closing 3:1 and 2:1 pitch wires Manual punching system Capable of simultaneous punch and bind 25 Sheet punching capacity* Double hand reduces amount of punching force required 240 Sheet wire binding capacity (up to 32mm wires) Removable chip tray Micro adjuster for exact closing of wire First, punch the block of sheets by using the manual lever on top of the machine. Second, insert and open the required size wire. Third, insert the sheets onto the wire and then close Consumables Product Part number Wire Coil 4.8mm Black Pack 100 053L00002 Wire Coil 6.4mm Black Pack 100 053L00004 Wire Coil 8mm Black Pack 100 053L00006 Machine Specifications Wire Coil 9.5mm Black Pack 100 053L00008 Wire Coil 11mm Black Pack 100 053L00077 Part number: 053L00253 Machine dimensions: H 270mm x W 520mm x D 530mm Weight: 13.8kg Electrical Requirements: N/A Wire Coil 12.7mm Black Pack 50 053L00010 * Based on 80gsm Hints and Tips For more information or to place an order please contact your Fuji Xerox Supplies Sales Representative, call 13 14 11 or go to fxs.com.au Fuji Xerox Australia Pty Ltd. 101 Waterloo Road, Macquarie Park, NSW, 2140. Tel: (02) 9856 5000 Fax: (02) 9856 5003 www.fxs.com.au. Xerox and the sphere of connectivity design are trademarks or registered trademarks of Xerox Corporation in the U.S. and/or other countries. The contents described herein are correct as of 2011.