10 mbps Ethernet media converter
10 Mbps Ethernet Media Converter
iMcV-PIM
PRODUCT FEATURES
•
•
•
•
•
•
Satisfying today’s networking needs while preparing for tomorrow’s
cabling requirements can make designing and installing the physical
layer of networks a daunting task. The decreasing cost of fiber optic
cabling and switching equipment makes all-optical LANs the obvious
choice when future-proofing network equipment. Replacing legacy
equipment and wiring infrastructure is a costly choice. Managed media
conversion allows implementation of new technologies on existing
networks, while monitoring all connections, to keep networks running
and up-to-date.
B&B Electronics offers a wide range of SNMP-managed Ethernet
copper to fiber media converters, with a choice of fixed rate or
rate conversion capabilities. The “iMcV-“ modules also include
troubleshooting features and LEDs to assist in network diagnostics as
well as make isolating cable breaks easier. In addition, replacing the
hot-swappable modules won’t disable other modules services running
within the same chassis during product upgrades or maintenance and
troubleshooting.
Available for multi-mode or single-mode fiber
Double fiber capacity with single-strand fiber versions
Monitor links and receive vital traffic and health information and
notification should problems occur
Modular, hot-swappable architecture reduces operational costs
associated with product installation, upgrades and maintenance
SNMP Manageable
Convert 10 Mbps Copper to 10 Mbps Fiber
Ordering Information
Fiber
Model
Fiber
Number
Ports range
iMcV-PIM 10 Mbps
2 km
850-14940 MM850-ST
1
2 km
850-14941 MM850-SC
1
2 km
850-14942 MM1300-ST
1
2 km
850-14943 MM1300-SC
1
40 km
850-14944 SM1310/PLUS-ST
1
40 km
850-14945 SM1310/PLUS-SC 1
40 km
850-14946 SM1310/LONG-ST 1
40 km
850-14947 SM1310/LONG-SC 1
80 km
850-14949 SM1550/LONG-SC 1
Ethernet
PORTS
Ethernet
Connector
1
1
1
1
1
1
1
1
11
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
iMcV-PIM also available in CWDM Fiber. Call for details.
All converters feature an RJ-45 copper port and a fiber port, with a
choice of SC or ST connectors.
iView: Windows 2000/XP/Vista/Win7
iMcV-PIM_3713ds
10 Mbps Ethernet Media Converter
iMcV-PIM
Specifications
Technical
10Base-T twisted pair
10Base-FL fiber
MDI/MDIX switch
Features LinkLoss and FiberAlert
Connectors: RJ-45 and ST, SC
50/125µm or 62.5/125µm multi-mode fiber
9/125µm single-mode fiber
Install in any iMediaChassis or MediaChassis
Support GUI-Based iView²
Support Half- and Full-Duplex operation
Include diagnostic LEDs
Include hot-swappable architecture
Mechanical
Dimensions
Shipping Weight
Environmental
Operating Temperature:
Storage Temperature:
Operating Humidity
4.19”H x 0.78”W x 2.75”D
(10.74 x 2 x 7.05 cm)
0.30 lbs (.11 kg)
+32° to +122° F (0° to +50° C)
-13° to +158° F (-25° to +70° C)
5% to 95% (non-condensing),
0 – 10,000 ft. altitude
Regulatory Approvals
FCC Class A
CE
Mechanical diagram
(dimensions in inches & millimeters)
.76
.11
3.04
2.73
1.44
2.79
3.57
4.19
.62
.57
1.32
.71
.76
.31
.42
.12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement