null  null
FOOD MACHINE
YOUR BEST ASSISTANT
MEAT MINCER
Qualification certification 1SO 9001
MADE IN CHINA
FOOD MACHINE FACTORY
INSTRUCTION MANUALS:
|.Description
The Model BEM-8# Meat mincer is made by us are designed basing on
model BSM-8# advanced technology and our creative concept, It is driven
through worm Wheel. The machine is compact in construction of smooth
and reliable running The motor is easy to maintain and install. The stainless
steel meat mincing unit to meet maximum-hygiene standard, and good
looking and easy clean The'machines are suitable for meat mincing In
household use only.
II. Technicl specifications
Model Bsm—8#
Voltage 110V
Cycle 50Hz
Input Power 1/3Hp
Productivity 80-110kgh
Dimensions 50028. 5*I50M
Weight 14/13KGS
III.Operation and notes
1.Before use, please check that the power supply corresponds to that
required by the machine and that the external grounding means is
reliable connected
2.The machine which 3 phase motor must be checked that the machine
rotates in the direction indicated by the rotation mark. If the rotation
direction is wrong, change the two of the three line-wires each other.
3.Remove the cutting group and wash them with clean water reassemble
them as directed in figure and screw the latch
(2)
SPECIAL NOTICE
Before taking any further step,please pay attention to the following
SPECIAL NOTICE:
A) For the Switch partwe have adopted sell-lock switch After turning
off the switch,please pull out the yellow locking pin on the switch.
Without this locking pin,nobody can turn on the machine.
B) When using for next time just insert Whe pin into the switch.
C) Te further guarantee you r safety on the left of the switch, there is a
Current breaker button.
D) When the machine is over-load orthe machine has problem of leak
electricity the Current breaker will automatically cut off the
power supply.
E) Altor the problem is solved, plese makesure the switch is in off
position:push the Curent breaker button and turn on the switch.
INSTRUCTION MANUALS:
|. Description
The Model BSM-124 Meal mincer are designed basing on model BSM-124
advanced technology and our creative concepllt is driven through worm
wheel, The machine is compact in construction of smooth and reliable
running . The motor is easy to maintain and install. The full stainless steel
meal mincing unit is to meet maximum hygiene standard ,and good looking, and
easy clean The machines are suitable for meat mincing in household use only.
Il. Technical specifications
Voltage 110V ol
Cycle 60HZ
“Input power 1HP =
Output power 500W
Productivity 120-150KG/H
Weight — 26K0
ll|.Operation and notes
1.Befor use please check that the power supply correspondsto that of
required by the machine and that the external grounding means Is reliable
connected.
2 The machine which 3 phase motor must be checked thal the machine
rotates in the direction indicated by the rotation mark. If the rotation
direction is wrong,change the two of Ihe three line-wires each other.
3.Remove the cutting group and wash them with clean cloth reassemble them
as directed in figure and screw the latch,
(1) (2) |
4 Remove skin and bone from the meat (0 be minced cut them into pieces.
Suit the feed-siza. |
5.Feed the pieces into mincing Chamber with the feed-slick Supplied don” |
use other materials.
6. Alter used.dismantiing the cutting group immediately and wash them as to
avoid bacteria growth. EAS
E 1
ИЕ
7. If the miced meat is not discharged smoothly or in the form of post, the
causes and remedies could ba:
1).8crew ring is lightened too much thus. the mincing blade does not
contact properly with the discharge plate. Readjust it.
2).The discharge plate is blocked. Clean it.
3). Blade edges are dull. Grind or replace it.
IMPORTANT SAFEGUARDS
When using electrical appliances basic safely precautions should always be
followed including the following;
A) Read all instructions.
B) Alter the job.clean carefully the machine till it's enough to dry bya cloth,
С) То protect against risk of electrical shock do not put the appliance in
water other liquid.
D) Close supervision is necessary when any appllance is used by or near
children.
E) Unplug from outlet when not in use before pulting on or taking off parts,
and before cleaning.Make sure appliance is “off when not in use.
F) Avoid contacting Moving parts. Never leed meat by hand.Always use food
pusher,
G) Do nol operate any appliance with a damaged cord or plug or after Ihe
appliance maliunction,or is droppded or damaged in any mannar.Returmn
appliance to the nearest authorized service facility for examination, repair
or electrical or mechanical adjustment.
H) The use of attachments not recommended or sold by the manufacturer
may cause fire electric shock or injury.
|) Do not use outdoors.
J) Do not let cord hang over edge of table or counter,
K) Do not use fingers to scrape food away from discharge disc while appliance
is operating. Cut type injury may result.
I) Lubricate the gears at regular intervals by putting cil(0.3kg.anproxjinto
gearbox-case about six-monthly.
M} The meal cutter should be carefully to handle Il is necessary to replace
it If not sharp enough.
My Don'trepeatedly starting the machine.
0) SAVE THESE INSTRUCTIONS
p) HOUSEHOLD USE ONLY
Fy CIRCUIT DIAGRAM
1.Parts List
Parts 4 | Name of Part ey
! Зегем {МУХ 32) 6
2 Stabilizer 4
3 Turning over Board 1
4 Serew'MAX8) I
1 Capacitor Support 1
b Capacitor(20uF,450V) 1
1 Morar 1
ñ Kevi4X17} 1
g Shaft 1
ia Dual Gonc{I[: HIT 11:18 i
Li Gear I{13T) 1
12 Gear IV{40T) 1
13 Genrbox-Cust 1
14 Screw{MéX401 4
16 Case 1
I8 Combine Switch |
19 Cable Clips 1
28 |Sponge Pad 2
2.Technical Specifications
У
Power SA
г.
Place Siar
Met
J.CIRCUIT DIAGRAM
hide
АК по
I Anke
"35h
r hour
„WHITE
Parts $
31
21
33
34
25
Mame of Part
Motor
Dil st
FOTW
seat
Screw(MóX20)
Latch
e r ring
Key (3X 1]
5 E
cal= С
cer head
row
Arbor
Meat Cutter
Plate
Hand wheel
Feed pan
stick
= == | | a | | = | = [об
ARTS LIST
t NO. of Part
M16#16
3|Rub
over
5|Screw (M5#10
6/Nut
11
12
Y
14|Tee joint and front cover of gear box
r
lá spring washer (6
1 rm
21 her
Ц r cover
24irear cover
in(5*12
Je|flexiable ri
th de
Е
к)
5
>. =
oO
a |
LU e
a 13 /
Le 8
ÖL {| =
с)! | =
O | = E
E EN
a 3 |
li 847
- в Nu
Е
Lr
„| |® x a
Е Е © "E
E? £ §
uo т =
= | 5 = $
Ф
= 5
ale SR
Y Y =
а.
y #5
©
n°
>
-
=) —
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement