HD7700 Electric Punch

HD7700 Electric Punch
HD7700 Electric Punch
Available in horizontal or vertical punching, the HD7700 is tops in the industry, no one
offers a more powerful table-top punch with interchangeable dies.
Features:
• Patented anti-jam feature detects punch
over load.
• Patented “QCDS”, quick change
die system, no tools, nothing to take apart. All punch pins easily disengage.
• LED diagnostic display.
• Punching capacity rated up to 50 Sheets of 20 lb.or 80gsm.
The number of sheets depends
on the paper weight and punch pattern used (15,000 to 18,000 SPH)
90 Cycles Per Minute.
• Pre-set paper stop guide for easy setup. Accu-Set” paper adjustment knob for fine adjustments on odd paper sizes.
• Easy, “Paper to Pin” sight alignment, for balanced hole to edge margins on odd-sized
applications.
• Extra high capacity chip tray.
• Die included with punch.
• HD7700 vertical punch can be upgraded to an automatic punch.
• 14” open ended punching.
• Smooth, power-on-demand operation.
• Extremely durable metal construction.
HD7700 Punching Capacities based on die pattern
Three Hole Die - Punching capacity of 50 sheets of 20# bond.
Double-O Wire Die - Punching capacity 40 sheets of 20# bond paper.
Velobind Die Chart - Punching capacity of 50 sheets of 20# bond.
Plastic Comb Binding Die - Punching capacity 40 sheets of 20# bond paper.
Spiralastic Plastic Coil Die Chart - Punching capacity 40 sheets of 20# bond
paper.
Binding machines can be added to your vertical HD7700 system.
The HD4470 for plastic comb binding, EWC 8370 , HD 8370 , HD 8000 for
wire binding or HD 4170 for plastic coil binding. Optional Mounting Brackets
allow it to be securely attached or use binding units free standing to create
separate punch and bind stations.
U
S
A
www.spiralbinding.com
800.631.3572
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement