IR Infrared Thermometers Includes the GM300 and

IR Infrared Thermometers
Includes the GM300 and GM700, a great Value Hand Held Instrument in
hard case with battery included. Also includes the RayTemp 2 and IR Micro
Thermometer.
IR Infrared Thermometers
www.labfacility.com
IR GM300E Infrared Thermometer
XE-4000-001
This infrared thermometer is used for measuring the temperature of
the object's surface, which is applicable for various hot, hazardous or
hard-to-touch objects without contact safely and quickly.
•
•
•
•
•
•
•
•
•
•
•
•
Measuring range: -50-420°C (-58-788°F)
Accuracy: +/- 1.5°C / +/- 1.5%
Resolution: 0.1°C or 0.1°F
Distance spot ratio: 12:1
Emissivity: 0.10-1.00 Adjustable (0.95 Preset)
MAX / MIN / AVG / DIF reading
°C / °F unit selectable
Auto Power off & Data Hold
High / Low Temperature Alarm setup
Laser ON / OFF selectable
Backlight ON / OFF selectable
Requires one standard 9V battery (included)
IR Infrared Thermometers
www.labfacility.com
IR GM700 Infrared Thermometer with Hard Case
XE-4001-001
This infrared thermometer is used for measuring the temperature of
the object's surface, which is applicable for various hot, hazardous or
hard-to-touch objects without contact safely and quickly.
•
•
•
•
•
•
•
•
•
•
•
Precise non-contact thermometer, highly accurate and reliable.
Compact size, one-handed design for simple and convenient
operation.
Simply point to an object and read its temperature.
LED back light design for operation under poor illumination
°C / °F selection and laser target pointer ON /OFF selection.
Supports MAX / MIN / AVG / DIF reading.
Supports high / low temperature alarm setup.
Laser pointer for accurate target aiming.
With data store recall function and data hold function
The measure distance is 12:1, this is object distance ratio, it
means if the diameter of object tested is 10cm, the distance
between thermometer and object is 12*10=120cm.
Laser on/off switch, Auto power off & temperature data hold.
Applications
hot water pipes, hot engine parts, cooking surfaces, hot tubes
insulation, electrical connection, ballasts in electric lights, electric
motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks,
hot cold food products, heating air conditioning, etc
IR Infrared Thermometers
www.labfacility.com
IR RayTemp 2 Infrared Thermometer
XE-3941-001
Simply aim the thermometer at the target and press the measure
button to display the surface temperature over the range of -49.9 to
349.9 °C with a 0.1 °C or 1 °C resolution and assured accuracy of ±1°C
over the range 0 to 100°C.
•
•
•
Free traceable certificate of calibration
Records the max/min temperatures
Displays ambient temperature
IR Infrared Thermometers
www.labfacility.com
IR Micro Infrared Thermometer
XE-3944-001
The IR-Micro is a pocket-sized, low cost infrared thermometer. Simply
aim the unit at the target and press the button to display the surface
temperature instantly.
The distance to target ratio is 1:1 and therefore the unit should be
positioned as close to the target as possible. A fixed emissivity of 0.95
makes this thermometer suitable for a wide range of food and
industrial applications.
Each unit incorporates a °C/°F button, display hold feature and an
auto-power off facility that automatically turns the instrument off after
fifteen seconds, maximising battery life. Supplied with batteries and
integral pocket clip.
•
•
•
•
Range -50 to 260 °C
Resolution 0.1 °C/°F
Display hold
Compact, lightweight & easy to use
IR Infrared Thermometers
www.labfacility.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project