Panasonic CQVX100N User manual

Add to my manuals
20 Pages

advertisement

Panasonic CQVX100N User manual | Manualzz

Model:

CQ-VX100N

Installation Instructions

Einbauanleitung

Instructions d’installation

Installatiehandleiding

Istruzioni per l’installazione

Instrucciones de instalación

TEXT

¡Please read these instructions carefully before using this product and keep this manual for future reference.

¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.

¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

Wiring/Verdrahtung/Câblage/Bedrading/Cablaggio/Conexiones eléctricas

System-up Connector/System-Upgrade-Stecker/

Connecteur de mise à niveau de système/

Systeemuitbreidingsaansluiting/

Connettore di potenziamento del sistema/

Conector de mejora del sistema

SIDE BRAKE

1

(Bright green) (Leuchtend grün) (Vert clair)

(Lichtgroen) (Verde chiaro) (Verde claro)

2

(Brown/black stripe) (Braun mit schwarzem Streifen) (Brun à rayures noires)

(Bruin met zwarte streep) (Marrone con riga nera) (Marrón con franja negra)

3

(Blue/white stripe) (Blau mit weißem Streifen) (Bleu à rayures blanches)

(Blauw met witte streep) (Blu con riga bianca) (Azul con franja blanca)

4

(Violet/white stripe) (Violett mit weißem Streifen)

(Violet à rayures blanches) (Paars met witte streep)

(Viola con riga bianca) (Violeta con franja blanca)

ACC B5

B6

B7

B8 A7

A8

A5

A4

1 Side Brake (Parking Brake) Connection Lead

2 External Remote Control Lead

3 External Amplifier Control Power Lead

4 Reverse Lead

1 Verbindungskabel für Feststellbremse (Handbremse)

2 Leitungsdraht für externe Fernbedienung

3 Stromsteuerkabel des externen Verstärkers

4 Rückwärtsgangkabel

1 Fil de connexion de frein à main (frein de stationnement)

2 Fil de la télécommande extérieure

3 Fil d’alimentation pour commande d’amplificateur

extérieur

4 Fil de marche arrière

1 Handremdraad

2 Externe afstandsbedieningsdraad

3 Externe versterker stroomstuurdraad

4 Achteruit-draad

1 Cavo di collegamento del freno a mano (freno di stazionamento)

2 Cavo di telecomando esterno

3 Cavo alimentazione controllo amplificatore esterno

4 Cavo di retromarcia

1 Cable de conexión del freno de mando (freno de estacionamiento)

2 Cable de control remoto externo

3 Cable de alimentación de control de amplificador externo

4 Cable de marcha atrás

BATTERY 15A

A4 : Battery Lead (Yellow)

A5 : Motor Antenna Relay Control Lead (Blue)

A7 : Power Lead (IGN or ACC) (Red)

A8 : Ground Lead (Black)

B4

B3

B2

B1

B

A

A4 : Batteriekabel (Gelb)

A5 : Steuerkabel für Relais der motorbetriebenen Antenne (Blau)

A7 : Versorgungskabel (IGN oder ACC) (Rot)

A8 : Massekabel (Schwarz)

A4 : Fil de batterie (Jaune)

A5 : Fil de commande de relais de moteur d’antenne (Bleu)

A7 : Fil d’alimentation (IGN ou ACC) (Rouge)

A8 : Fil de masse (Noir)

Speakers

B8 : Rear Left –

(Green/black stripe)

B7 : Rear Left + (Green)

B6 : Front Left –

(White/black stripe)

B5 : Front Left + (White)

B4 : Front Right –

(Gray/black stripe)

B3 : Front Right + (Gray)

B2 : Rear Right –

(Violet/black stripe)

B1 : Rear Right + (Violet)

Lautsprecher

B8 : Hinten Links –

(Grün mit schwarzem Streifen)

B7 : Hinten Links + (Grün)

B6 : Vorne Links –

(Weiß mit schwarzem Streifen)

B5 : Vorne Links + (Weiß)

B4 : Vorne Rechts –

(Grau mit schwarzem Streifen)

B3 : Vorne Rechts + (Grau)

B2 : Hinten Rechts –

(Violett mit schwarzem Streifen)

B1 : Hinten Rechts + (Violett)

Haut-parleurs

B8 : Arrière Gauche –

(Vert à rayures noires)

B7 : Arrière Gauche + (Vert)

B6 : Avant Gauche –

(Blanc à rayures noires)

B5 : Avant Gauche + (Blanc)

B4 : Avant Droit –

(Gris à rayures noires)

B3 : Avant Droit + (Gris)

B2 : Arrière Droit –

(Violet à rayures noires)

B1 : Arrière Droit + (Violet) luidsprekers

B8 : Achter Links –

(Groen met zwarte streep)

B7 : Achter Links + (Groen)

B6 : Voor Links –

(Wit met zwarte streep)

B5 : Voor Links + (Wit)

B4 : Voor Rechts –

(Grijs met zwarte streep)

B3 : Voor Rechts + (Grijs)

B2 : Achter Rechts –

(Paars met zwarte streep)

B1 : Achter Rechts + (Paars)

Fuse (15 A) Refer fuse replacement to your nearest authorized

Panasonic Service Centre. Do not try fuse replacement by yourself.

Sicherung (15 A) Wenden Sie sich zum Austausch der Sicherung an eine autorisierte Panasonic-Kundendienststelle in Ihrer Nähe.

Versuchen Sie nicht, den Austausch selbst vorzunehmen.

Fusible (15 A) Confier le remplacement de fusible au centre de service de service après-vente Panasonic agréé le plus proche.

N’essayez pas de remplacer le fusible tout(e) seul(e).

Zekering (15 A) Laat het vervangen van de zekering over aan uw dichtstbijzijnde Panasonic service-centrum. Probeer in geen geval zelf de zekering te vervangen.

Fusibile (15 A) Per la sostituzione del fusibile rivolgersi al più vicino Centro di Assistenza Panasonic autorizzato. Non tentare di sostituire il fusibile da sé.

Fusible (15 A) Solicite el reemplazo del fusible al centro de servicio Panasonic autorizado que le quede más cerca. No trate de reemplazar usted mismo el fusible.

Antenna/Antenne/Antenne/Antenne/Antenna/Antena

A4 : Accudraad (Geel)

A5 : Antennemotorrelais-stuurdraad (Blauw)

A7 : Stroomdraad (IGN of ACC) (Rood)

A8 : Massadraad (Zwart)

A4 : Cavo batteria (Giallo)

A5 : Cavo di controllo relé antenna motorizzata (Blu)

A7 : Cavo di alimentazione (IGN o ACC) (Rosso)

A8 : Cavo di massa (Nero)

A4 : Cable de la batería (Amarillo)

A5 : Cable de control del relé de la antena motorizada (Azul)

A7 : Cable de la alimentación (IGN o ACC) (Rojo)

A8 : Cable de masa (Negro)

Altoparlanti

B8 : Posteriore Sinistro –

(Verde con riga nera)

B7 : Posteriore Sinistro + (Verde)

B6 : Anteriore Sinistro –

(Bianco con riga nera)

B5 : Anteriore Sinistro + (Bianco)

B4 : Anteriore Destro –

(Grigio con riga nera)

B3 : Anteriore Destro + (Grigio)

B2 : Posteriore Destro –

(Viola con riga nera)

B1 : Posteriore Destro + (Viola)

Altavoces

B8 : Trasero Izquierdo –

(Verde con franja negra)

B7 : Trasero Izquierdo + (Verde)

B6 : Frontal Izquierdo –

(Blanco con franja negra)

B5 : Frontal Izquierdo + (Blanco)

B4 : Frontal Derecho –

(Gris con franja negra)

B3 : Frontal Derecho + (Gris)

B2 : Trasero Derecho –

(Violeta con franja negra)

B1 : Trasero Derecho + (Violeta)

1

Safety Information

CAUTION:

PLEASE FOLLOW THE LAWS AND REGULATIONS

OF YOUR STATE, PROVINCE OR COUNTRY FOR

INSTALLATION OF THE UNIT.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE

THIS APPLIANCE TO RAIN, SPLASHING, DRIP-

PING OR MOISTURE.

2 CQ-VX100N

Upgrade Options

TV Tuner

(CY-TUP153N, option)

CD Changer

(CX-DP880N, option)

DVD Changer

(CX-DH801N, option)

Rear Monitor Main Unit

CQ-VX100N iPod

®

Hands Free Kit with Audio

Streaming featuring Bluetooth

®

technology

(Bluetooth unit: CY-BT200N, option)

Expansion Module

(CY-EM100N, option)

2

Contents

Safety Information................................................2

Upgrade Options ..................................................3

Installation ............................................................4

Electrical Connections ......................................10

CQ-VX100N 3

Installation

Preparation

3

Caution

¡Please follow the laws and regulations of your province or country for installation of the unit.

¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers.

¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries.

¡Before installation, check the radio operation with antenna and speakers.

¡Disconnect the cable from the negative (–) battery terminal (see caution below).

¡The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.

0 – 30°

Caution

¡Do not disconnect the battery terminals of a car with trip or navigational computer since all user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent shorts.

Dashboard Installation

Installation Opening

The unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.5

mm – 6 mm thick in order to be able to support the unit.

182 mm

53 mm

Installation Precautions

This product should be installed by a professional installer, if possible.

In case of difficulty, please consult your nearest authorized Panasonic Service Centre.

1. This system is to be used only in a 12 V DC battery system (car) with negative ground.

2. Follow the electrical connections carefully ( a page

10-19). Failure to do so may result in damage to the unit.

3. Connect the power lead after all other connections are made.

4. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT) terminal.

5. Insulate all exposed wires to prevent short circuiting.

6. Secure all loose wires after installing the unit.

7. Please carefully read the operating and installation instructions of the respective equipment before connecting it to this unit.

4 CQ-VX100N

Installation Hardware

(For Installation)

No.

q Trim Plate

Item w Mounting Collar e Mounting Spring r Mounting Bolt (5 mmø)

Diagram Qty.

1

<YFC054C087CA>

1

<YFX214C433CA>

2

<YFX054C077CA>

1

<YEJV014C002N>

2 t y u

Round Head Screw

(5 mmø x 6 mm)

Flat-Head Screw

(5 mmø x 6 mm)

Round Head Screw

(4 mmø x 3 mm)

4 i Spacer o Double-Faced Adhesive Tape

4

<ZZBISVD7005B>

2

1 set

<ZZBISVD7005E>

Installation Hardware

(For Wiring )

No.

!0

Item

Power Connector

!1

Conversion Cable for AV1 IN

!2

ISO Antenna Adapter

Diagram Qty.

1

<YAJ024C128CA>

1

<YEAERA33000K>

1

(YEAA33144)

4

Note:

¡The number in parenthesis underneath each accessory part name is the part number for maintenance and service.

¡Accessories and their parts numbers are subject to modification without prior notice due to improvements.

¡Use the supplied screws for installation exclusively. In case of losing any of them, please order the specific screw.

Transportation Bracket Removal

Be sure to remove the transportation brackets before use (installation).

Use round head screws ( 5 mm ø x 6 mm) for installation. ( a page 8)

Be careful not to lose these screws.

Round Head Screw

(5 mm ø x 6 mm)

Transportation

Bracket

Round Head Screw

(5 mm ø x 6 mm)

Transportation

Bracket

CQ-VX100N 5

Installation

(continued)

5

Mounting the Main Unit

Installation Procedures (When using Mounting Collar w)

Note:

¡The car model, installation conditions and combination of the units used may impose some restrictions on opening and closing the monitor as well as on the angle and position to which the monitor can be adjusted.

1

Insert the Mounting Collar w into the dashboard, and bend the mounting tabs out with a screwdriver.

Fastening the Mounting Collar

How much to bend the tabs will vary depending on the car. Bend them with a screwdriver to fasten the

Mounting Collar w securely in the dashboard.

Dashboard

IMPORTANT

When this unit is installed in dashboard, ensure that there is sufficient air flow around the unit to prevent damage from overheating. Do not block any ventilation holes on the unit.

Tab w Mounting Collar r Mounting Bolt

(5 mmø)

!0

Power Connector e Mounting Spring

2 y Flat-Head Screw

(5 mmø x 6 mm)

3

Attach the Mounting Springs e to the unit.

Establish the rear connection of the unit.

After fixing Power Connector !0, fix the rear of the unit to the car body by either method (a) or (b) shown at right.

5

6

4 Insert the unit into Mounting Collar w.

Secure the clamp plate of Mounting Collar w to the hook of Mounting Spring e .

Clamp plate

Insert Trim Plate q.

After installation reconnect the negative

(–) battery terminal.

6 CQ-VX100N

Method for Fixing the Mounting Spring

Two holes of the mounting spring allow you to select between two mounting types as shown below.

(A) Regular installation method (B) Deeper installation method

6 y Flat-Head Screw

A few millimeters of console projecting y Flat-Head Screw

Less projecting y Flat-Head Screw y Flat-Head Screw

Caution

¡Method (B) is not available in some types of cars.

Method for Fixing the Rear of the Unit

(a) Using the Rear Support Strap (option)

Fire wall of car

3 mm ø

Rear Support Strap

(option, YEFG044C002)

Tapping Screw

(5 mmø x 16 mm)

(option, XTT5+16AFN)

Hex. Nut (5 mmø)

(option, YEJN99023) r Mounting Bolt

(5 mmø)

(b) Using the Rubber Cushion (option)

Rubber Bushing

(option)

Rear Support Bracket

(Provided on the Car) r Mounting Bolt

(5 mmø)

CQ-VX100N 7

Installation

(continued)

7

Installation Procedures (When not using Mounting Collar w)

Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.

Select mounting screws according to the hole positions and hole shape of the bracket.

t Round Head Screw (5 mmø x 6 mm) 2 pieces

Reuse the two round head screws removed from the transportation brackets.

u Round Head Screw (4 mmø x 3 mm)

4 pieces

When using these mounting holes y Flat-Head Screw (5 mmø x 6 mm) 4 pieces

Use the supplied Spacer i if mounting hole of your car is shaped like below.

Mounting Hole of a Bracket

(in section) i Spacer t Round Head Screw

(5 mmø x 6 mm)

Bracket

Existing Bracket (R) o Double-Faced

Adhesive Tape t Round Head Screw

(5 mmø x 6 mm) i Spacer o Double-Faced Adhesive Tape

Existing Bracket (L) (Bracket originally attached to the car)

To Remove the Unit

q Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself.

w After removing the right and left clamp plates, pull the unit with both hands till it comes out.

q w

Push here to remove the clamp plates.

8 CQ-VX100N

Connecting the Side Brake (Parking Brake) Connection Lead

Caution

¡For safety, be sure to ask your nearest professional installer to do this connection.

8

Hand brake Foot brake

Side brake (parking brake) switch

The side brake (parking brake) switch position varies with car model.

For details on the exact location of the side brake (parking brake) switch in your car, contact your dealer.

SIDE BRAKE

Side Brake (Parking Brake) Connection

Lead (Bright green)

When the side brake (parking brake) lever is engaged, the unit is grounded by the chassis.

Brake light

Battery

+ —

Clip Connector

(From car accessories stores) Car chassis q Attach a Clip Connector to the end of the side brake

(parking brake) connection lead.

Comes up to this point.

w The Clip Connector is connected to the power source side lead of the side brake (parking brake) lever.

Side Brake (Parking Brake) Connection Lead

(Bright green)

Power source side lead

CQ-VX100N 9

9

Electrical Connections

Wiring Diagram

Caution

¡Check the connectors provided on your car (see precaution below) before connecting the system.

¡This unit is designed for use in a car having a 12 V negative ground battery system.

¡To prevent damage to the unit, be sure to follow the connection diagram.

¡Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).

¡Do not insert the power connector into the unit until the wiring is completed.

¡Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent cable terminals from touching any metal parts.

¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may clear the memory.

¡Run the cords avoiding the spots where the temperature can be extremely high.

Precautions (ISO Connector)

¡The pin arrangement of the power connector conforms to ISO standard.

¡The pin arrangement of ISO connectors in some cars may differ from the ISO standard.

¡Please check that the pin arrangement of the connector in your car conforms to ISO standard.

¡For car types A and B, change the wiring of the red and yellow leads as shown at below.

¡After connection, insulate the portions marked ( ✽) with insulating tape.

Note:

¡For cars other than types A and B, please consult your local car shop.

ISO

Standard ISO

A7: IGN or ACC switched 12 V supply

A7 (Red) ( ✽) (Red)

ACC

BATTERY 15A

A4 (Yellow) (

✽)

(Yellow)

A4: +12 V Battery (Permanent supply)

A

Car Type A

A7: +12 V Battery (Permanent supply)

(Red)

(

✽)

(Yellow)

BATTERY 15A

ACC

(Yellow) ( ✽) (Red)

A4: IGN or ACC switched 12 V supply

B

Car Type B

A7: +12 V Battery (Permanent supply)

(Red) (

✽) (Red)

(Yellow) (

✽)

(Yellow)

ACC

BATTERY 15A

A4: No connection

!0 Power Connector

(For rear connectors, a page 12)

CQ-VX100N

(Rear)

Note:

¡To prevent from damage to the unit, be sure to follow the wiring diagrams at right.

¡Be sure to fully plug in the connectors. Secure them with clamps and tapes.

¡All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or your dealer if other methods are required.

10 CQ-VX100N

CQ-VX100N

(Rear)

!0 Power Connector

To power connector of the unit.

Side Brake (Parking Brake) Connection Lead

(Bright green)

Be sure to wire the side brake (parking brake) for safety and preventing accidents.

External Remote Control Lead

(Brown/black stripe)

When using non-Panasonic external remote control, refer to the manufacture for their product before connecting.

External Amplifier Control Power Lead

(Blue/white stripe)

To an external amplifier.

Note:

¡Use the power control lead of the TV tuner for TV tuner connection.

¡Connect both the power control lead of the TV tuner and the amplifier control connector of the external amplifier when the TV tuner and external amplifier are connected at the same time.

SIDE BRAKE Speakers

B8 : Rear Left –

B7 : Rear Left +

B6 : Front Left –

B5 : Front Left +

B4 : Front Right –

B3 : Front Right +

B2 : Rear Right –

B1 : Rear Right +

Reverse Lead (Violet/white stripe)

When connecting the rear view camera, use the reverse lead. ( a page 13)

B8 (Green/black stripe)

B6 (White/black stripe)

B4 (Gray/black stripe)

B2 (Violet/black stripe)

ACC

A7 (Red)

A5 (Blue)

Not used.

A8 (Black)

BATTERY 15A

A4 (Yellow)

B7 (Green)

B5 (White)

B3 (Gray)

B1 (Violet)

B4

Caution

¡Use ungrounded speakers only.

Allowable input : 50 W or more

Impedance : 4 – 8 Ω

Use of speakers which do not match the specifications can cause burning, smoking or damage of the speakers.

¡Distance between speaker and amplifier: 30 cm or more

¡Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter)

B5

B6

B7

B8

B3

B2

B1

B

A

A7 : Power Lead (IGN or ACC) (Red)

To ACC power, +12 V DC.

A8 : Ground Lead (Black)

To a clean, bare metallic part of the car chassis.

A5 : Motor Antenna Relay Control

Lead (Blue)

To Motor Antenna (Max. 100 mA).

This lead is not intended for use with a switch actuated power antenna.

Note:

¡The power antenna extends automatically when the power of this unit is turned on.

A4 : Battery Lead (Yellow)

To the car battery, continuous +12 V

DC.

10

CQ-VX100N 11

11

Electrical Connections

(continued)

Names and Colors of Rear Connectors

System-up Connector

To external devices equipped with system-up connector.

1

3

*Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic

Service Center. Do not try fuse replacement by yourself.

2

CQ-VX100N

(Rear)

!2 ISO Antenna

Adapter

(If needed)

!0

Power

Connector

( a page 11)

VIDEO OUT

PRE OUT FRONT

PRE OUT REAR

EXT VIDEO IN

AV2 IN

CAMERA IN

S.W OUT

(Yellow)

Video Output Terminal (VIDEO OUT)

Connect the rear monitor. ( a page 16)

(R)(Red)

(L)(White)

Pre-Out Connector (front)

To an external amplifier.

(R)(Red)

(L)(White)

(Yellow)

Pre-Out Connector (rear)

To an external amplifier.

Video Input Terminal (EXT VIDEO IN)

Connect the video output terminal of

Expansion Module (CY-EM100N, option).

(R)(Red)

(L)(White)

(Yellow)

Audio/Video Input Terminal (AV2 IN)

Connect a VCR, camcorder, other brand’s car navigation system, etc. ( a page 19)

(Yellow)

(Black)

Camera Input Terminal (CAMERA IN)

Connect a rear view camera. ( a page 15)

Pre-Out Subwoofer connector (mono)

To an external amplifier.

12 CQ-VX100N

Connection with TV Tuner (CY-TUP153N)

Note:

¡Refer to the operating instructions for the connected devices, in addition.

External Amplifier Control Power Lead

Note:

¡Connect both the power control lead of the TV tuner and the amplifier control connector of the external amplifier when the TV tuner and external amplifier are connected at the same time.

Clip connector

(From car accessories stores)

PWR-CONT

!0

Power

Connector

Power Control Lead

System-up Connector

(supplied with CY-TUP153N)

12

Power Connector

(supplied with CY-TUP153N)

CQ-VX100N

(Rear)

Video Input Terminal

(EXT VIDEO IN)

(Video)

(Yellow)

(Video)

(Yellow)

RCA Cord

(supplied with CY-TUP153N)

(Video)

(Yellow)

TV Tuner

CY-TUP153N (option)

CQ-VX100N 13

13

Electrical Connections

(continued)

Connection with DVD Changer (CX-DH801N)

Note:

¡Refer to the operating instructions for the connected devices, in addition.

DVD Changer

CX-DH801N (option)

Ground Lead (Black)

To a clean, bare metallic part of the car chassis

Battery Lead

BATTERY 5 A

(Yellow) To the car battery, continuous +12 V DC

Power Lead (Red) (not used)

ACC

(R) (Red)

(L) (White)

RCA Cord

System-up connector

Power Connector

(Supplied with CX-DH801N)

DIN Cord (Black)

DIN Connector

CHANGER IN

Conversion Cable for DVD/CD Changer

(CA-CC30N, option)

CQ-VX100N

(Rear)

(Video)

(Yellow)

Video Input

Terminal (EXT

VIDEO IN)

EXT VIDEO IN

(Yellow)

14 CQ-VX100N

Connection with CD Changer (CX-DP880N)

Note:

¡Refer to the operating instructions for the connected devices, in addition.

CD Changer

CX-DP880N (option)

Power Connector

(Supplied with CX-DP880N)

(R) (Red)

RCA Cord

(L) (White)

CHANGER IN

DIN Connector

Conversion Cable for DVD/CD

Changer (CA-CC30N, option)

System-up connector

Ground Lead (Black)

To a clean, bare metallic part of the car chassis

Battery Lead (Yellow)

To the car battery, continuous

+12 V DC

DIN Cord (Black)

14

CQ-VX100N

(Rear)

CQ-VX100N 15

15

Electrical Connections

(continued)

Connection with Expansion Module (CY-EM100N)

Note:

¡Refer to the operating instructions for the connected devices, in addition.

Head unit/Expansion Module

Connecting cable

(Supplied with CY-EM100N)

(Video) (Yellow)

(L) (White)

(R)

(Red)

System-up

Connector

CQ-VX100N

(Rear)

(R) (Red)

(L) (White)

VIDEO OUT

AUDIO OUT

Camcorder

(Video) (Yellow)

Expansion Module

CY-EM100N

(option)

DVD Changer

CX-DH801N

(option) (Video)

(Yellow)

Video Input Terminal

(EXT VIDEO IN)

RCA cord

(option)

VIDEO OUT iPod

VIDEO-CNT

(Video)

(Yellow)

(L) (White)

(R) (Red)

CHANGER IN

Conversion Cable for

DVD/CD Changer

(CA-CC30N, option)

Direct Cable for iPod with Video

(CA-VDC300N, option)

16 CQ-VX100N

Connection with Rear View Camera

Note:

¡Refer to the operating instructions for the connected devices, in addition.

Rear View Camera

Control Unit

(option)

CQ-VX100N

(Rear)

Camera Input

Rear View Camera

(CY-RC50KN) (option)

Panasonic

(Video)

(Yellow)

16

!0

Power

Connector

RCA Cord (option)

CAMERA IN

Camera Input Terminal

(Yellow)

(Video)

(Yellow)

Reverse lamp

Clip connector

(From car accessories stores)

Battery

Reverse Lead

(Violet/white stripe)

Car chassis

P

R

N

D

2

L

Transmission gear

Connecting the Reverse Lead

If using an optional rear view camera, the reverse lead must be connected.

Connect the reverse lead (violet/white stripe) to the positive (+) lead of the reverse lamp (the lamp with a clear lens that lights when the transmission gear is shifted into the reverse position).

Note:

¡Connect the reverse lead after cutting the terminal at the end.

¡Use a Reverse Extension Cord (option) if needed.

Check the reverse lamp.

Take it out of the back of the tail lamp mount.

CQ-VX100N 17

17

Electrical Connections

(continued)

Connection with Rear Monitor

Note:

¡Refer to the operating instructions for the connected devices, in addition.

¡Please observe what shapes the connectors of the connecting devices are and where each of them is connected to in order to establish a proper connection.

COLOR LCD MONITOR

Rear Monitor Caution

¡For people sitting in the front seats, please enjoy only audio during driving.

Example:

Panasonic

VM1500

Audio Right

Audio Left

Video Input

(Video) (Yellow)

CQ-VX100N

(Rear)

RCA Cord (option)

(Video) (Yellow)

VIDEO OUT

18 CQ-VX100N

Connection with VCR or Camcorder

Note:

¡Refer to the operating instructions for the connected devices, in addition.

¡Please observe what shapes the connectors of the connecting devices are and where each of them is connected to in order to establish a proper connection.

AV1 IN

AV1 IN

Note:

¡Be sure to use the Conversion Cable for AV1 IN that is supplied with this product when an external device is connected to the AV1 IN terminal. Failure to observe this results in an audio or video output error.

¡Only the pin jack of the supplied Conversion Cable for AV 1 IN or a pin jack that has the same electrode arrangement can be connected to the AV 1 IN terminal. (See Fig. 1.)

¡Use of the supplied Conversion Cable for AV 1 IN or an audio pin jack that has the same electrode arrangement also allows users to enjoy only music.

In this case, the screen background becomes black.

CQ-VX100N

(Front)

!1

Conversion Cable for AV1 IN

(Video) (Yellow)

RCA Cord (option)

18

<Fig. 1>

Audio (L)

Audio (R)

(R) (Red)

(L) (White) (L)

(White)

(R)

(Red)

(Video)

(Yellow)

Video

Ground

POWER

INTELLIGENT SYSTEM

Camcorder

BS G-CODE

VCR

Example: Video Output

Audio Left

Audio Right

AV2 IN

Camcorder

CQ-VX100N

(Rear)

(Video) (Yellow)

RCA Cord (option)

AV2 IN

POWER

BS G-CODE

VCR

(R) (Red)

INTELLIGENT SYSTEM

(L) (White)

Example:

(R)

(Red)

(L)

(White)

(Video)

(Yellow)

Video Output

Audio Left

Audio Right

CQ-VX100N 19

Matsushita Electric Industrial Co., Ltd.

Web Site : http://panasonic.net

YFM294C123CA PTW1207-1018 Printed in China

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement