Fixed Type H.264 1.3 Mega Pixel Wired/Wireless IP Camera

Add to my manuals
9 Pages

advertisement

Fixed Type H.264 1.3 Mega Pixel Wired/Wireless IP Camera | Manualzz

Fixed Type H.264

1.3 Mega Pixel

Wired/Wireless

IP Camera

Quick Installation Guide

Version 1.0

1

Getting Started

Package Contents

Check the items contained in the package carefully. You should have the following items. Once any item contained is damaged or missing, contact the authorized dealer of your locale.

One ICS2200/ICS2230

One AC Power Adapter

One External Antenna (for wireless model)

One Camera Stand

One Ethernet Cable (RJ-45 type)

One Installation CD-ROM

One Quick Installation Guide

System Requirement

Networking

LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.

WLAN: IEEE 802.11b/g/n (for wireless model).

Accessing the Camera using Web Browser

CPU: Intel Pentium III 800MHz or above

RAM: 512MB

Resolution: 800x600 or above

User Interface: Microsoft® Internet Explorer 6.0 or above;

Apple Safari 2 or above; Mozilla Firefox 2.00 or above; Google Chrome

- 1 -

2

Setting Up the Camera

Installing the Camera Stand

The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera’s screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand.

The Camera Stand

- 2 -

Connecting the Camera to LAN

Use the provided Ethernet cable to connect the camera to your local area network (LAN).

When you connect the AC power adapter, the camera is powered on automatically. You can verify the power status from the Power

LED on the front panel of the camera.

Once connected, the Link LED starts flashing green light and the camera is on standby and ready for use now.

Connecting the Ethernet cable

- 3 -

Connecting the Camera to WLAN (for wireless model)

If you use a wireless network in your application environment, you need to attach the included external antenna to the camera.

When the camera is powered on, the camera will automatically search any access point with “default” SSID.

Attaching the external antenna

NOTE If the camera cannot connect to your wireless network, you need to install the camera in LAN and proceed with WLAN settings.

- 4 -

3

Accessing the Camera

Using IP Finder

1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program.

2. Click the IP Finder item to launch the utility. The control panel will appear as below.

Display the connected camera(s). Double click to link the Camera.

Click About to get the Version information of IPFinder.

Click Link to connect the selected camera.

Click Change IP to modify the IP address of the selected camera.

Click Search to find the IP address of the connected camera(s).

Click Exit to close the utility.

3. Once you get the IP address of the camera, launch the Web browser or UltraView Pro to access your camera.

TIP The Installation CD-ROM provides a setup program that allows you to install IPFinder on your computer. To install

IPFinder, click Install Software on the Auto-Run screen.

Both IPFinder shortcut and UltraView Pro shortcut will be installed on the computer desktop.

- 5 -

Accessing to the Camera

1. Since the default configuration of the camera is DHCP mode enabled, you are recommended to launch IPFinder to search the IP address that is assigned to the camera by the DHCP server, and then click Link to access the camera via the Web browser.

2. If Network Camera can't get IP Address under DHCP mode, the default IP Address will be 192.168.0.30

.

3. When the login window appears, enter the default User name

( admin ) and password ( admin ) and press OK to access to the main screen of the camera’s Web Configuration.

Enter the User name and Password.

- 6 -

4. Click Setup and then Smart Wizard to set up your camera quickly. The Smart Wizard will guide you through the necessary settings with detailed instructions on each step.

- 7 -

4

Tips

For more information, please refer to the Advanced Installation

Guide on the provided Installation CD-ROM.

For details of operating UltraView Pro, please refer to the

Software User Guide on the provided Installation CD-ROM.

If you have any problem on the product(s), please contact your local authorized dealer.

- 8 -

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement