SPEAKMAN
®
SE-622, SE-623, SE-625, SE-626
Installation, Maintenance & Operation Instructions
SAFE-T-ZONE® EMERGENCY SHOWER AND EYE/FACE WASH
DESCRIPTION
Floor mounted emergency deluge shower and eye or eye/face wash combination unit.
SE-622, SE-626
Shower is supplied with a 1” NPTF stay-open full flow ball valve, activated by triangular pull handle.
Eyewash is supplied with 1/2” NPTF stay-open full flow ball valve, activated by trigger bar.
SE-623, SE-625
Shower is supplied with a 1” NPTF stay-open full flow ball valve, activated by triangular pull handle.
Eye/face wash is supplied with 1/2” NPTF stay-open full flow ball valve, activated by push handle.
SE-622 SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: INTERNAL 20 GPM REGULATOR.
VALVE: 1” NPT FEMALE STAINLESS STEEL. FULL FLOW STAY-OPEN BALL VALVE.
ACTIVATOR: STAINLESS STEEL TUBE.
STANCHION: 1-1/2” STAINLESS STEEL, 18 GAUGE TUBING.
INLET & WASTE: 1-1/4” NPT MALE.
FLOOR FLANGE: STAINLESS STEEL WITH (4) 7/16” DIA. MOUNTING HOLES ON 4” CENTERS.
FINISH: STAINLESS STEEL.
EYEWASH: SE-505 (REFERENCE ADDITIONAL SE-505 IOM SHEET).
SHIPPING WEIGHT: 34 LB.
EMERGENCY SIGN: 7-7/8” X 12” PLASTIC WALL SIGN.
SE-623 SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: INTERNAL 20 GPM REGULATOR.
VALVE: 1” NPT FEMALE STAINLESS STEEL. FULL FLOW STAY-OPEN BALL VALVE.
ACTIVATOR: STAINLESS STEEL TUBE.
STANCHION: 1-1/2” STAINLESS STEEL, 18 GAUGE TUBING.
INLET & WASTE: 1-1/4” NPT MALE.
FLOOR FLANGE: STAINLESS STEEL WITH (4) 7/16” DIA. MOUNTING HOLES ON 4” CENTERS.
FINISH: STAINLESS STEEL.
EYE/FACE WASH: SE-400 (REFERENCE ADDITIONAL SE-400 IOM SHEET).
SHIPPING WEIGHT: 37 LB.
EMERGENCY SIGN: 12” X 7-7/8” PLASTIC WALL SIGN.
SE-625 SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: INTERNAL 20 GPM REGULATOR.
VALVE: 1” NPT FEMALE STAINLESS STEEL. FULL FLOW STAY-OPEN BALL VALVE.
ACTIVATOR: STAINLESS STEEL TUBE.
STANCHION: 1-1/2” STAINLESS STEEL, 18 GAUGE TUBING.
INLET & WASTE: 1-1/4” NPT MALE.
FLOOR FLANGE: STAINLESS STEEL WITH (4) 7/16” DIA. MOUNTING HOLES ON 4” CENTERS.
FINISH: STAINLESS STEEL.
EYE/FACE WASH: SE-490 (REFERENCE ADDITIONAL SE-490 IOM SHEET).
SHIPPING WEIGHT: 35 LB.
EMERGENCY SIGN: 7-7/8” X 12” PLASTIC WALL SIGN.
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747
04/28/16 speakman.com 92-SE-62X-01
SE-626 SPECIFICATIONS
SHOWER HEAD: 8” DIA. STAINLESS STEEL.
FLOW CONTROL: INTERNAL 20 GPM REGULATOR.
VALVE: 1” NPT FEMALE STAINLESS STEEL. FULL FLOW STAY-OPEN BALL VALVE.
ACTIVATOR: STAINLESS STEEL TUBE.
STANCHION: 1-1/2” STAINLESS STEEL, 18 GAUGE TUBING.
INLET & WASTE: 1-1/4” NPT MALE.
FLOOR FLANGE: STAINLESS STEEL WITH (4) 7/16” DIA. MOUNTING HOLES ON 4” CENTERS.
FINISH: STAINLESS STEEL.
EYEWASH: SE-582 (REFERENCE ADDITIONAL SE-582 IOM SHEET).
SHIPPING WEIGHT: 39 LB.
EMERGENCY SIGN: 7-7/8” X 12” PLASTIC WALL SIGN.
INSTALLATION
When assembling use wrench to tighten connection joints. Be sure and use pipe sealant on all threaded connections. Review drawing (as shown on other side) to assure proper location of inlets, outlets, and accessories.
The best method to assembling this unit is as follows:
(1) Mount the bottom stanchion section to the floor using suitable anchors. Then assemble the middle section and then the top section, making sure rubber sealing gasket is seated correctly.
(Use pipe sealant on all joints).
(2) Rest the eyewash bowl or eye/face wash bowl on the rubber washer and drain spud, making sure to get the bowl as level as possible.
(3) Once bowl is positioned correctly on spud, apply plumbers putty to drain strainer and tighten with hex tool (supplied).
(4) Take 1/2" stainless steel flexible hose and connect it to the 1/2" NPTM supply outlet located on the stanchion and the 1/2" in-line strainer on the eyewash or eye/face wash.
(5) Assemble pull rod and shower head.
(6) Once unit is completely assembled, connect potable water supply to 1-1/4” top inlet, and 1-1/4” waste to bottom outlet.
Failure to use potable water can result in emergency units producing impure or contaminated water causing possible further injury. The drain tailpiece or waste should be connected to an adequate drain in compliance with local plumbing codes.
OPERATION
The shower is activated by pulling the triangle pull handle. Once the valve is activated the head will continue to discharge water until the valve is manually closed. This is done by pushing up the pull handle to the off position.
The eyewash or eye/face wash is activated by pushing the trigger bar or the push handle back 90°. The unit will operate until the trigger bar or the push handle is manually pulled back up to the off position.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be activated on a weekly basis to flush the line and verify proper operation. Speakman Company furnishes a testing record tag (91-0635) with each unit. On this tag the date of inspection and the inspector’s initials should be noted.
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747
04/28/16 speakman.com 92-SE-62X-01
MAINTENANCE
The valve and the eyewash or eye/face wash are the only portion of the unit that may require maintenance.
Should you need parts to repair this unit, please reference the parts listing below for correct part numbers.
Reference additional technical sheets (supplied) for information on the SE-505 eyewash, SE-400 eye/face wash, SE-490 eye/face wash, SE-582 eyewash, SE-820 shower head, and the SE-911-SS valve. Before any maintenance is done
be sure to shut the water supply off
.
SHOWER AND EMERGENCY EYEWASH COMBINATIONS
SE-622 Stainless Steel SE-505 Eyewash
SE-623 Stainless Steel SE-400 Eye/Face Wash
SE-625 Stainless Steel
SE-626 Stainless Steel
SE-490 Eye/Face Wash
SE-582 Eyewash
WARNING: Use only genuine Speakman parts when repairing or replacing components
.
To order parts call 1-800-537-2107.
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747
04/28/16 speakman.com 92-SE-62X-01
SE-622 ROUGH-IN SE-623 ROUGH-IN SE-625/626 ROUGH-IN
REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP #
1 SE-911-SS
2 SE-820
DESCRIPTION
1” Ball Valve with Pull Rod
8” Stainless Steel Shower Head
3
4A
4B
4C
4D
RPG47-0043
SE-505
SE-400
SE-490
SE-582
Pull Handle
Eyewash
Eye/Face Wash
Eye/Face Wash
Eyewash
Note: All units meet existing ANSI Z358.1
Standards and OSHA Rules.
Product improvements may cause specification and dimensional changes without notice.
5 63-0027 S/S Flexible Hose
FLOW DATA
SHOWER:
FLOW PRESSURE PSI (BAR) 30 (2.07) 60 (4.14)
FLOW RATE GPM (LPM)
SE-505 EYEWASH:
20 (75) 25 (94)
SE-400 EYE/FACE WASH:
FLOW PRESSURE PSI (BAR) 30 (2.07)
FLOW RATE GPM (LPM) 3 (11)
FLOW PRESSURE PSI (BAR) 30 (2.07)
FLOW RATE GPM (LPM) 9.55 (36.6)
SE-490 EYE/FACE WASH:
FLOW RATE GPM (LPM)
FLOW PRESSURE PSI (BAR) 30 (2.07)
4.5 (17.0)
NOTE: This unit should be connected to an uninterrupted source of potable water, with a minimum flowing pressure of 30 PSI and a maximum static pressure of 80 PSI.
SE-582 EYEWASH:
FLOW PRESSURE PSI (BAR) 30 (2.07)
FLOW RATE GPM (LPM) 3.2 (12.1)
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747
04/28/16 speakman.com 92-SE-62X-01
