sldvt direct-vent louverless gas fireplaces

sldvt direct-vent louverless gas fireplaces
SLDVT DIRECT-VENT LOUVERLESS GAS FIREPLACES
The Superior™ direct-vent family of fireplaces offer large viewing areas and
a slim firebox depth to bring the fire
closer to the room, providing a stunning
louverless presentation. SLDVT units are
heater-rated and provide efficient heat
circulation for relaxing room warmth.
SLDVT-45 shown with Traditional Buff refractory liner
™
STANDARD FEATURES
Dramatic louverless design
Flex connector with shut off and connecting pipe nipple
Wiring for optional wall switch
SLDVT-30
SLDVT-35
SLDVT-40
Millivolt (standing pilot) or electronic ignition with battery back-up
SLDVT-45
Rugged oak-style logs, burning embers and lava rock
16 (406)
E
Variable hi/lo valve (millivolt models only)
Electrical Inlet
(Right side only)
Gas Inlet
(Left side only)
A
C
Optional
Electrical
Inlet
(Both sides)
B
D
F
G
Sealed tempered glass panel
5-7/8
(149)
9-1/2
(241)
1-5/8 (41)
3 (76)
3 (76)
H
Front View
Right Side View
1/2”
(13)
9-1/4”
(235)
A
B
C
D
E
F
G
H
Inches (millimeters)
SLDVT-30
32-1/4” (819)
28-1/8” (714)
23-1/4” (590)
27” (686)
30-1/4” (768)
20” (508)
10” (254)
28” (711)
SLDVT-35
32-1/4” (819)
28-1/8” (714)
23-1/4” (590)
32” (813)
35-1/4” (895)
25” (635)
12-1/2” (317)
33” (838)
Top vent only models using Security Chimneys™ 4.5”-7.5” SecureVent™ and Secure-flex™ vent systems with up to 60’ vertical and
20’ horizontal allowed
20-year limited warranty
OPTIONAL FEATURES
Top View
DIMENSIONS
Controls hidden in low profile access compartment
SLDVT-40
37-1/4” (946)
33-1/8” (841)
28-1/4” (718)
37” (940)
40-1/4” (1022)
30” (762)
15” (381)
38” (965)
SLDVT-45
37-1/4” (946)
33-1/8” (841)
28-1/4” (718)
42” (1067)
45-1/4” (1149)
35” (889)
17-1/2” (445)
43” (1092)
Screen panel kits*
Pull Screen front panel kits
Style View™ Doors, Arched and Square Pane, in Black and Satin
Pewter finishes
Ceramic fiber refractory liners –Traditional Buff and Traditional Red
Wireless remotes including thermostatically controlled versions
Forced-air blower kits
FRAMING DIMENSIONS
SLDVT-30
SLDVT-35
SLDVT-40
SLDVT-45
WIDTH 30-1/4” (768)
35-1/4” (895)
40-1/4” (1022)
45-1/4” (1149)
HEIGHT 35-1/4” (895)
35-1/4” (895)
40-1/4” (1022)
40-1/4” (1022)
DEPTH
16” (406)
16” (406)
16” (406)
16” (406)
SLDVT-35 shown with Arched pane Satin
Pewter Style View™ doors.
SLDVT-35 shown with Screen panel kit.
BTU/HR CHART
SLDVT-30NM
SLDVT-35NM
SLDVT-40NM
SLDVT-45NM
NATURAL (HIGH-LOW)
13,500 - 10,000
16,000 - 12,750
20,000 - 15,500
23,000 - 17,500
SLDVT-35PM
SLDVT-35PM
SLDVT-40PM
SLDVT-45PM
PROPANE (HIGH-LOW)
11,500 - 9,000
15,000 - 11,400
18,000 - 14,000
22,000 - 17,000
ENERGUIDE**
A.F.U.E.
** Intermittent
SLDVT-30
NG 51
LP 54
NG 57
LP 58
ignition systems
SLDVT-45 shown with Square pane Black
Style View™ Doors and Traditional Buff
refractory liner
* Screen panel kit provides a barrier to prevent direct contact with hot glass surface
SLDVT-35 shown with Pull Screen front
panel kit and Traditional Buff refractory liner
FIREPLACE EFFICIENCY %
SLDVT-35
59
61
59
61
SLDVT-40
61
61
62
64
SLDVT-45
59
61
64
66
Large Cover Photo: SLDVT-40 shown with Traditional Red refractory liner.
IMPORTANT NOTES:
As with any heating appliance, fireplace or stove, this appliance is extremely hot during operation. Read
and understand all operating instructions before using this appliance. For further information, consult
your dealer.
Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire
and heating performance. Performance can also vary with home design and insulation, climate, condition and type of
fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated.
Diagrams, illustrations and photographs are not to scale - consult installation instructions. Product designs, materials,
dimensions, specifications, colors and prices are subject to change or discontinuance without notice.
Built to ANSI Z21.88 and CSA 2.33 standards.
Consult your distributor for local fireplace code information.
™
Portland
©Lennox Industries Inc. 2009
Visit us at www.Lennox.com, or contact us at 1-800-9-LENNOX.
785259M 11-09
US
Cert no. SCS-COC-001182
OTL Report No. 116-F-50-5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement