Enabling Devices 2268W User guide

Enabling Devices 2268W User guide
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Musical Fireworks Wall Panel #2262W
Do not submerge the unit, as it will damage the electrical
components.
Mounting Options:
Each Panel has 4 mounting holes for wall mounting. Please Note: Mounting
hardware is not included. You can use standard wall anchoring hardware
found at hardware stores and Home Improvement Centers. Please consult
one of their hardware associates for the proper mounting hardware based
on your wall construction. In addition we also offer our Track System when
mounting 3 or more Light Panels item No. 3116.
USER’S GUIDE
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
[email protected]
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
The Musical Fireworks panel has flashing lights, the sounds of
fireworks and an appropriate celebration tune. Panel comes with an
on/off adjustable volume and vibration control. This wall panel can be
used with our Track System (#3116) or mounted directly on a wall.
Size: 15" W x 13 ½ "L x 6 ½ "H. Requires 4 C Batteries. Weight: 4½
lbs.
1. Musical Fireworks Panel requires 4 C batteries (not included).
Use Alkaline batteries only (e.g. Duracell or Energizer brand). Do
not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. The battery compartments are located under the
magnetically held compartment on the top of the panel. To access
the compartments lift up the access door and then remove the
Phillips Head screws from each battery compartment cover. Install
the C batteries into each holder. When installing new batteries,
always be careful to observe battery polarity. Replace battery
covers and screws. Never mix old and new batteries together or
different brands or types together. (See Photo).
2. Turn the ON/OFF/VOLUME knob clockwise, you will hear an
auditable click. Adjust to knob for desired volume level.
3. Just press the big frosted dome to experience flashing lights, the
sounds of fireworks and an appropriate celebration tune. Each
press of the dome will play all the above for as long as the dome is
pressed. Once you stop pressing the dome everything will stop.
Pressing the dome again will start everything over.
Troubleshooting:
Problem: Musical Fireworks Panel’s lights or music do not work when
activated.
Action #1: Make sure the ON/OFF/VOLUME knob is turned.
Action #2:
#2: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Problem: Musical Fireworks Panel does not light up or play music.
Action #1: Make sure the ON/OFF/VOLUME knob is turned ON and
set at an auditable level.
Action #2:
#2: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Problem: Musical Fireworks Panel does not work at all.
Action: Check all Batteries for strength and for proper battery polarity.
Replace if weak or dead.
Care of the Unit:
The Musical Fireworks Panel can be wiped clean with any household
multi-purpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Rev 4/12/17
/12/17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement