For Quartz Watch with Chronograph Function Center Second Hand

For Quartz Watch with Chronograph Function
Center Second Hand Chronograph 1/1 sec. Timing up to 59 minutes 59
seconds
A DISPLAY AND BUTTONS
chronograph ①
Chronograph second Hand
Hour Hand
Minute Hand
Button A
Chronograph minute Hand
Second Hand
6
24-hour Hand
Button B
Calendar
chronograph ②
Hour Hand
Minute Hand
Button A
Chronograph minute Hand
24-hour Hand
Second Hand
Chronograph second Hand
Button B
Calendar
B SETTING THE TIME
1. Pull the crown out to the ② position so that the second hand stops at 0
position.
2. Turn the crown to set the hour and minute hands.
* Before setting the time, check that the chronograph measurement is
stopped.
* Check that 24-hour hand is set correctly.
7
C SETTING THE DATE
1. Pull the crown out to the ① position.
2. Turn the crown to left to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the ⓪ position.
D USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united
up to maximum of 59 min 59 sec.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button “A” is
pressed.
2. Pressing button “B” resets the chronograph and all hands return to their
0 positions.
RESET
“A”
TIME MEASUREMENT
“B”
8
“A”
“A”
STOP
“B”
Standard Measurement
chronograph ①
START
Chronograph
Second Hand
RESET
STOP
Button A
Button A
Chronograph
minute hand
Button B
chronograph ②
Chronograph
minute Hand
Chronograph
Second Hand
Button A
Button A
Button B
9
Split Time Measurement
chronograph ①
START
SPLIT/SPLIT REREASE
Button A
RESET
STOP
Button A
Button B
Button B
chronograph ②
Button A
Button A
Button B
10
Button B
E CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand
do not return to the 0 second position after the chronograph has been
reset, and including after the battery has been replaced.
1. Pull the crown out to ② position.
2. Press button “A” to set the chronograph second hand to 0 position.
The chronograph hands can be advanced rapidly by continuously
pressing button A.
3. Once the hands have been zeroed, reset the time and return the crown
to its ⓪ position.
* Do not return crown to normal position while chronograph second
hand return to 12:00 (ZERO) position.
Hand stops on the way when crown are returned to normal position
and these positions are recognized as 12:00 (ZERO) position.
11

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project