Owner's manual | Honda Fourtrax Recon ES TRX250TE ATV Owner’s manual

05/03/22 09:30:03 31HM8840_001

This manual should be considered a permanent part of the ATV and should remain with the ATV when it is resold.

This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.

No part of this publication may be reproduced without written permission.

The vehicle pictured on the front cover may not match your vehicle.

Honda Motor Co., Ltd. 2005

05/03/22 09:30:06 31HM8840_002

2006

Honda TRX250TE

FOURTRAX RECON ES

OWNER’S MANUAL

FOR OFF-ROAD USE ONLY

This vehicle is designed and manufactured for off-road use only.

USA only:

It conforms to US EPA Noise Emission regulations, but does not conform to Federal Motor Vehicle Safety Standards or US EPA On

Highway Exhaust Emission regulations, and operation on public streets, roads, or highways is illegal. The vehicle is equipped with a USDA qualified spark arrester. Obey local laws and regulations.

It conforms to US EPA and California exhaust emission regulations for

ATVs.

05/03/22 09:30:12 31HM8840_003

Introduction

Congratulations on choosing your Honda ATV.

When you own a Honda, you’re part of a worldwide family of satisfied customers − people who appreciate Honda’s reputation for building quality into every product.

Your Honda was designed as a recreational ATV for off-road use by one rider only.

Before riding, take time to get acquainted with your ATV and how it works. To protect your investment, we urge you to take responsibility for keeping your ATV well maintained. Scheduled service is a must, of course. But it’s just as important to observe the break-in guidelines, and perform all pre-ride and other periodic checks detailed in this manual.

We also recommend that you read this owner’s manual before you ride.

It’s full of facts, instructions, safety information, and helpful tips. To make it easy to use, the manual contains a detailed list of topics at the beginning of each section, and both an in-depth table of contents and an index at the back of the book.

As you read this manual, you will find information that is preceded by a symbol. This information is intended to help you avoid damage to your Honda, other property, or the environment.

Read the Warranties Booklet (page 201 ) thoroughly so you understand the coverages that protect your new Honda and are aware of your rights and responsibilities.

Whenever you ride, tread lightly. By staying on established trails and riding only in approved areas, you help protect the environment and keep off-road riding areas open for the future.

Introduction

05/03/22 09:30:16 31HM8840_004

Introduction

If you have any questions, or if you ever need special service or repairs, remember that your Honda dealer knows your ATV best and is dedicated to your complete satisfaction.

Please report any change of address or ownership to your Honda dealer so we will be able to contact you concerning important production information.

You may also want to visit our website at www.honda.com.

Happy riding!

California Proposition 65 Warning

WARNING:

This product contains or emits chemicals known to the

State of California to cause cancer and birth defects or other reproductive harm.

Introduction

05/03/22 09:30:19 31HM8840_005

A Few Words About Safety

Your safety, and the safety of others, is very important. And operating this ATV safely is an important responsibility.

To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual.

This information alerts you to potential hazards that could hurt you or others.

Of course, it is not practical or possible to warn you about all hazards associated with operating or maintaining an ATV. You must use your own good judgment.

You will find important safety information in a variety of forms, including:

Safety Labels

–– on the ATV.

Safety Messages

–– preceded by a safety alert symbol and one of three signal words:

DANGER, WARNING,

or

CAUTION

.


05/03/22 09:30:24 31HM8840_006


These signal words mean:

You WILL be KILLED or

SERIOUSLY HURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

You CAN be HURT if you don’t follow instructions.

Safety Headings

–– such as Important Safety Reminders or Important

Safety Precautions.

Safety Section

–– such as ATV Safety.

Instructions

–– how to use this ATV correctly and safely.

This entire manual is filled with important safety information –– please read it carefully.


05/03/22 09:30:30 31HM8840_007

Contents

These pages give an overview of the contents of your owner’s manual.

The first page of each section lists the topics covered in that section.

ATV Safety .......................................................................................

Important safety information you should know, plus a look at the

.

safety-related labels on your ATV.

1

Indicators & Controls ......................................................................

.

The location and function of indicators and controls on your ATV and operating instructions for various controls and features.

9

Before Riding ....................................................................................

.

27

The importance of wearing a helmet and other protective gear, how to make sure you and your ATV are ready to ride, and important information about loading.

Basic Operation & Riding ...............................................................

.

How to start and stop the engine, shift gears, and brake. Also, riding

43

precautions.

Contents

05/03/22 09:30:38 31HM8840_008

Contents

Servicing Your Honda .....................................................................

.

Why your ATV needs regular maintenance, what you need to know

77

before servicing your Honda, an owner maintenance schedule, and instructions for specific maintenance and adjustment items.

Tips ....................................................................................................

.

151

How to store and transport your ATV and how to be an environmentally-responsible rider.

Taking Care of the Unexpected ......................................................

.

161

What to do if you have a flat tire, your engine won’t start, etc.

Technical Information .....................................................................

.

181

ID numbers, technical specifications, and other technical facts.

Consumer Information ....................................................................

.

197

Information on warranties, emission controls, how to get Honda service manuals.

Table of Contents .............................................................................

.

206

Sequential listing of topics in this owner’s manual.

Index ..................................................................................................

.

212

Quick Reference

Handy facts about fuel, engine oil, tire sizes, and air pressures.

Contents

05/03/22 09:30:39 31HM8840_009

05/03/22 09:30:43 31HM8840_010

ATV Safety

This section presents some of the most important information and recommendations to help you ride your ATV safely. Please take a few moments to read these pages. This section also includes information about the location of safety labels on your ATV.

Important Safety Information ................................................................

. 2

Safety Labels ..........................................................................................

. 5

ATV Safety

1

05/03/22 09:30:49 31HM8840_011

Important Safety Information

Your ATV can provide many years of service and pleasure − if you take responsibility for your own safety and understand the challenges you can meet while riding.

There is much that you can do to protect yourself when you ride. You’ll find many helpful recommendations throughout this manual. The following are a few that we consider most important.

Follow the Age Recommendation

The minimum recommended age for this ATV model is 16. Children under age 16 should never operate this vehicle.

Always Wear a Helmet

It’s a proven fact: helmets significantly reduce the number and severity of head injuries. So always wear an approved motorcycle helmet. We also recommend that you wear eye protection, sturdy boots, gloves, and other protective gear (page 30 ).

Never Carry a Passenger

Your ATV is designed for one person only. There are no handholds, footrests, or seat for a second person − so never carry a passenger. A passenger could interfere with your ability to move around to maintain your balance and control of the ATV.

2

ATV Safety

05/03/22 09:30:53 31HM8840_012


Ride Off-Road Only

Your ATV is designed and manufactured for off-road use only. The tires are not made for pavement, and the ATV does not have turn signals and other features required for use on public roads. If you need to cross a paved or public road, get off and walk your ATV across.

Take Time to Learn & Practice

Even if you have ridden other ATVs, take time to become familiar with how this ATV works and handles. Practice in a safe area until you build your skills and get accustomed to the ATV’s size and weight.

Because many accidents involve inexperienced or untrained riders, we urge all riders to take a training course approved by the ATV Safety

Institute (ASI). See page 32 .

Contact an authorized ATV dealer or call 1-800-887-2887 (USA only) to find out about the training courses nearest you.

Be Alert for Off-Road Hazards

The terrain can present a variety of challenges when you ride off-road.

Continually ‘‘read’’ the terrain for unexpected turns, drop-offs, rocks, ruts, and other hazards. Always keep your speed low enough to allow time to see and react to hazards.

ATV Safety

3

05/03/22 09:30:58 31HM8840_013


Ride within Your Limits

Pushing limits is another major cause of ATV accidents. Never ride beyond your personal abilities or faster than conditions warrant.

Remember that alcohol, drugs, fatigue, and inattention can significantly reduce your ability to make good judgments and ride safely.

Don’t Drink and Ride

Alcohol and riding don’t mix. Even one drink can reduce your ability to respond to changing conditions, and your reaction time gets worse with every additional drink. So don’t drink and ride, and don’t let your friends drink and ride either.

Keep Your Honda in Safe Condition

It’s important to keep your ATV properly maintained and in safe riding condition. Having a breakdown can be difficult, especially if you are stranded off-road far from your base. To help avoid problems, inspect your ATV before every ride and perform all recommended maintenance.

4

ATV Safety

05/03/22 09:31:01 31HM8840_014

Safety Labels

Your ATV comes with a hang tag and several labels containing important safety information. Anyone who rides the vehicle should read and understand this information before riding.

The labels should be considered permanent parts of the vehicle. If a label comes off or becomes hard to read, contact your Honda dealer for replacements.

ATV Safety

5

05/03/22 09:31:09 31HM8840_015

Safety Labels

USA only

6

ATV Safety

05/03/22 09:31:16 31HM8840_016

Safety Labels

ATV Safety

7

05/03/22 09:31:26 31HM8840_017

Safety Labels

8

ATV Safety

05/03/22 09:31:30 31HM8840_018

Indicators & Controls

This section shows the location of all indicators and controls you would normally use before or while riding your ATV.

The items listed on this page are described in this section. Instructions for other components are presented in other sections of this manual where they will be most useful.

Operation Component Locations .........................................................

. 11

Indicators ..............................................................................................

. 14

Reverse and Neutral Indicators ........................................................

. 14

Gear Position Indicator .....................................................................

. 15

(cont’d)


9

05/03/22 09:31:33 31HM8840_019


Control and Features ............................................................................

. 16

Fuel Valve ........................................................................................

. 16

Choke Knob .....................................................................................

. 17

Ignition Switch .................................................................................

. 18

Start Button ......................................................................................

. 19

Engine Stop Switch ..........................................................................

. 19

Headlight Switch ..............................................................................

. 20

Headlight Dimmer Switch ................................................................

. 20

Recoil Starter ....................................................................................

. 21

Throttle Lever ..................................................................................

. 22

Gear Shift Switch .............................................................................

. 23

Reverse Selector Knob .....................................................................

. 23

Front Brake Lever ............................................................................

. 24

Rear Brake Lever .............................................................................

. 24

Rear Brake Pedal ..............................................................................

. 24

Parking Brake ...................................................................................

. 25

Flag Pole Bracket .............................................................................

. 26

10


05/03/22 09:31:36 31HM8840_020

Operation Component Locations

reverse selector knob headlight dimmer switch gear shift switches choke knob front brake lever rear brake lever/ parking brake lever headlight switch throttle lever ignition switch engine stop switch start button


11

05/03/22 09:31:39 31HM8840_021


flag pole bracket front cargo rack

12


rear brake pedal

05/03/22 09:31:41 31HM8840_022


fuel valve recoil starter seat lock lever rear cargo rack storage compartment


13

05/03/22 09:31:46 31HM8840_023

Indicators

Reverse and Neutral Indicators

ignition switch.

The reverse indicator will light when the transmission is in reverse and the ignition switch is ON ( ).

The neutral indicator will light when the transmission is in neutral and the ignition switch is ON ( ).

If one of these indicators does not come on when it should, have your

Honda dealer check for burned-out bulbs or other problems.

CENTER OF HANDLEBAR

(1) (2)

(1) reverse indicator

(2) neutral indicator

14


05/03/22 09:31:50 31HM8840_024

Indicators

Gear Position Indicator

ignition switch is in the ON ( ) position and the engine is running.

The indicator shows: 1 − 5 for the five forward speed gears.

CENTER OF HANDLEBAR

(1)

(1) gear position indicator


15

05/03/22 09:31:56 31HM8840_025

Controls & Features

Fuel Valve

LEFT SIDE

ON

(1)

OFF

RES

(1) fuel valve

The manual fuel valve is located on the left side of the fuel tank.

The three-way fuel valve is used to control the flow of fuel from the fuel tank to the carburetor.

ON − normal position for riding.

OFF − for parking, storing, or transportation.

RES

− for extra fuel to get to a gas supply for refueling.

Reserve Fuel

Remember to check that the fuel valve is in the ON position each time you refuel. If the fuel valve is left in the RES position, you may run out of fuel with no reserve.

For complete information about fueling your ATV, see page 93 .

16


05/03/22 09:32:00 31HM8840_026

Choke Knob

LEFT HANDLEBAR

(1)


( A )

( B )

( C )

50 .

(1) choke knob

(A) fully ON

(B) half way position

(C) fully OFF


17

05/03/22 09:32:06 31HM8840_027


Ignition Switch

(page 50 ). Insert the key and turn it to the right for the ON ( ) position.

Key Position

ON ( )

OFF ( )

Function

Electrical circuits on.

No electrical circuits function.

CENTER OF HANDLEBAR

(1)

(1) ignition switch ON

OFF

18


05/03/22 09:32:10 31HM8840_028


Start Button

LEFT HANDLEBAR

(2)

(1) start button

(2) engine stop switch

(1)

START

OFF

RUN starts the engine. See

Starting Procedure,

page 51 .

When the start button is pushed, the starter motor will crank the engine.

Engine Stop Switch

To operate, slide the switch to either OFF ( ) position. The switch must be in the RUN ( ) position to start the engine, and it should normally remain in the RUN ( ) position even when the engine is

OFF.

If your ATV is stopped with the ignition switch ON ( ) and the engine stop switch OFF ( ), the battery will discharge. Turn the ignition switch OFF ( ) to prevent battery discharge.


19

05/03/22 09:32:15 31HM8840_029


Headlight Switch

LEFT HANDLEBAR

(2)

(1)

(1) headlight switch

(2) headlight dimmer switch

ON

OFF

HI

LOW

The headlight switch ( ) is used to turn the headlight ON ( ) or OFF

( ). To operate, turn the switch to ON ( ) or OFF ( ).

Headlight Dimmer Switch

and low beams of the headlight. To operate, turn the switch to HI ( ) for high beam, LO ( ) for low beam.

20


05/03/22 09:32:18 31HM8840_030


Recoil Starter

LEFT SIDE

(1)

(1) recoil starter

See

Using the Recoil Starter,

page 55 .

Instruments & Controls

21

05/03/22 09:32:22 31HM8840_031


Throttle Lever

RIGHT HANDLEBAR

(A)

(1)

(1) throttle lever

(A) to open the throttle

The throttle controls engine rpm (speed). To increase engine rpm, press pressure on the throttle lever. The throttle will automatically return to the closed position (engine idle) when you remove your thumb.

22


05/03/22 09:32:25 31HM8840_032


Gearshift Switch

These switches are used to select the next higher or lower gear in the gear.

See

Shif ting Gears,

page 56 .

LEFT HANDLEBAR

(1)

(2)

(1) upshift switch

(2) downshift switch


23

05/03/22 09:32:29 31HM8840_033


Reverse Selector Knob

stopped and the transmission in neutral (make sure the gear position indicator shows ‘‘N’’), push in the knob, squeeze the rear brake lever/

Riding in Reverse,

page 59 .

LEFT HANDLEBAR

(1)

(2)

(3)

(1) reverse selector knob

(2) rear brake lever/ parking brake lever


24


05/03/22 09:32:33 31HM8840_034


Front Brake Lever

The front brake lever is used to slow or stop your ATV. To operate, pull the lever. For information on braking techniques, see page 61 .

Rear Brake Lever/Parking Brake Lever

The rear brake lever/parking brake lever is used to slow or stop your

ATV. To operate, pull the lever. For information on braking techniques, see page 61 .

Rear Brake Pedal

The rear brake pedal is used to slow or stop your ATV. To operate, depress the pedal. For information on braking techniques, see page 61 .


25

05/03/22 09:32:38 31HM8840_035


Parking Brake

LEFT HANDLEBAR

(A)

(1)

(2)

(1) lock lever


(A) to lock allows it to be used as a parking brake. To operate, first squeeze the rear brake lever/parking brake lever using your left hand and then lock it with the lock lever using your right hand. See

Parking

page 75 .

The brakelights are activated by applying the parking brake. When using the parking brake, be sure to turn the ignition switch OFF ( ) to avoid discharging the battery.

26


05/03/22 09:32:42 31HM8840_036


Flag Pole Bracket

RIGHT REAR

(1)

(1) flag pole bracket

Flag poles are optional equipment available from your Honda dealer. To the flag pole kit.

Flag poles are required in some riding areas. Check local regulations before riding.


27

05/03/22 09:32:43 31HM8840_037

28


05/03/22 09:32:47 31HM8840_038

Before Riding

Before each ride, you need to make sure you and your Honda are both ready to ride. To help get you prepared, this section discusses how to evaluate your riding readiness, what items you should check on your

ATV, and adjustments to make for your comfort, convenience, or safety.

This section also includes important information about loading.

Are You Ready to Ride ?

.....................................................................

. 30

Protective Apparel ............................................................................

. 30

Rider Training ..................................................................................

. 32

Age Recommendation ......................................................................

. 33

No Passengers ..................................................................................

. 33

No Alcohol or Drugs ........................................................................

. 34

Is Your ATV Ready to Ride ?

..............................................................

. 35

Pre-ride Inspection ...........................................................................

Load Limits & Guideline .....................................................................

. 35

. 38

Loading ............................................................................................

. 38

Load Limits ......................................................................................

. 39

Loading Guidelines ..........................................................................

. 40

Accessories & Modifications ...............................................................

. 41

Accessories .......................................................................................

. 41

Modifications ...................................................................................

. 42

Before Riding

29

05/03/22 09:32:54 31HM8840_039

Are You Ready to Ride?

Before you ride your ATV for the first time, we urge you to:

Read this owner’s manual and the labels on your ATV carefully.

Make sure you understand all the safety messages.

Know how to operate all the controls.

Before each ride, be sure:

You feel well and are in good physical and mental condition.

You are wearing an approved motorcycle helmet (with chin strap tightened securely), eye protection, and other protective clothing.

You don’t have any alcohol or drugs in your system.

Protective Apparel

For your safety, we strongly recommend that you always wear an approved motorcycle helmet, eye protection, boots, gloves, long pants, and a long-sleeved shirt or jacket whenever you ride.

Although complete protection is not possible, wearing proper gear can reduce the chance of injury when you ride.

Following are suggestions to help you choose the proper gear.

Helmets and Eye Protection

Your helmet is your most important piece of riding gear because it offers the best protection against head injuries. A helmet should fit your head comfortably and securely.

30

Before Riding

05/03/22 09:32:59 31HM8840_040


An open-face helmet offers some protection, but a full-face helmet offers more. Regardless of the style, look for a DOT (Department of

Transportation) sticker in any helmet you buy (USA only). Always wear a face shield or goggles to protect your eyes and help your vision.

Operating this ATV without wearing an approved motorcycle helmet, eye protection, and protective clothing could increase your chances of severe injury or death in the event of an accident.

Always wear an approved motorcycle helmet that fits properly and wear eye protection

(goggles or face shield), gloves, boots, long-sleeved shirt or jacket and long pants.

Additional Riding Gear

In addition to a helmet and eye protection, we also recommend:

Sturdy off-road motorcycle boots to help protect your feet, ankles, and lower legs.

Off-road motorcycle gloves to help protect your hands.

Riding pants with knee and hip pads, a riding jersey with padded elbows, and a chest/shoulder protector.

Before Riding

31

05/03/22 09:33:04 31HM8840_041


Rider Training

Developing your riding skills is an on-going process. Even if you have ridden other ATVs, take time to become familiar with how this ATV works and handles. Practice riding the ATV in a safe area to build your skills. Do not ride in rough terrain until you get accustomed to the

ATV’s controls, and feel comfortable with its size and weight.

We urge all riders to take a certified course approved by the ATV Safety

Institute (ASI). For information about the ASI training course nearest you, call the national toll-free number; (800) 887-2887 (USA only).

Other riding tips can be found in the

Rider

Tips & Practice Guide f or the ATV

booklet that came with your ATV (USA only).

Operating this ATV without proper instruction could increase your risk of an accident which could lead to serious injury or death.

Beginning and inexperienced operators should complete the certified training course offered by

Honda. They should then regularly practice the skills learned in the course and the operating techniques described in the owner’s manual.

32

Before Riding

05/03/22 09:33:08 31HM8840_042


Age Recommendation

The minimum recommended age for this ATV model is 16. For safety, never let children under 16 years old operate this vehicle.

A child using an ATV that is not recommended for their age could lose vehicle control while riding, resulting in severe injury or death.

A child under 16 should never operate an ATV with engine size greater than 90cc.

No Passengers

This ATV is designed as an operator-only vehicle. The long seat is designed to allow the rider to change body position, not for carrying a passenger. Never let a passenger ride on the seat or on the front or rear cargo racks.

Carrying a passenger on this ATV greatly reduces your ability to balance and control this

ATV and could cause a crash and you or your passenger could be injured or killed.

Never carry a passenger on this ATV.

Before Riding

33

05/03/22 09:33:12 31HM8840_043


No Alcohol or Drugs

Alcohol, drugs and ATVs don’t mix. Even a small amount of alcohol can impair your ability to operate an ATV safely. Likewise, drugs − even if prescribed by a physician − can be dangerous while operating an

ATV. Consult your doctor to be sure it is safe to operate a vehicle after taking medication.

Operating this ATV after consuming alcohol or drugs can seriously affect your judgement, cause you to react more slowly, affect your balance and perception, and result in serious injury or death.

Never consume alcohol or drugs before or while operating this ATV.

34

Before Riding

05/03/22 09:33:18 31HM8840_044

Is Your ATV Ready to Ride?

Before each ride, it’s important to inspect your ATV and make sure any problem you find is corrected. A pre-ride inspection is a must, not only for safety, but because having a breakdown, or even a flat tire, can be a major inconvenience.

If your ATV has overturned or been involved in a collision, do not ride the vehicle until it has been inspected by your Honda dealer. There may be damage or other problems you cannot see.

Improperly maintaining this ATV or failing to correct a problem before riding can cause a crash in which you can be seriously hurt or killed.

Always perform a pre-ride inspection before every ride and correct any problems.

Pre-ride Inspection

Check the following items before you get on the ATV:

Engine Oil

Fuel

Check the level and add oil if needed (page

99 ).

Check for leaks.

Check the level and add fuel (page 94 ) if needed. Also make sure the fuel fill cap is securely fastened.

Check for leaks.

Before Riding

35

05/03/22 13:58:16 31HM8840_045


Tires

Nuts & Bolts

Underbody &

Exhaust System

Air Cleaner Housing

Drain Tube

Leaks, Loose Parts

Cable

Use a gauge to check the air pressure. Adjust if needed. Also look for signs of damage or excessive wear (page 137 ).

Check the wheels to see that the axle nuts are tightened. Use a wrench to make sure all accessible nuts, bolts, and fasteners are tight.

Check for, and remove, any dirt, vegetation or other debris that could be a fire hazard or interfere with the proper operation of the vehicle.

Check for deposits in the drain tube. If necessary, clean the tube (page 108 ) and check the air cleaner housing.

Walk around your ATV and look for anything that appears unusual, such as a leak or loose cable.

Check the cable housings for wear. Check the fittings for looseness. Replace or tighten as needed.

Lights

Make sure the headlight, brakelight and tail light are working properly.

If you are carrying cargo, also check the following:

Loading Limits

Make sure you do not exceed the load limits

(page 39 ).

Check that all cargo is secure.

Cargo

36

Before Riding

05/03/22 13:58:26 31HM8840_046


Check these items after you get on the ATV:

Throttle

Check the freeplay and adjust if needed. Press the throttle to make sure it moves smoothly without sticking, and snaps shut automatically when it is released, in all steering positions

(page 109 ).

Brakes

Reverse Assist Lever

Squeeze the front and rear brake levers and step on the rear brake pedal to check that the controls operate normally. Check for proper freeplay (pages , ). Make sure there is no brake fluid leakage.

Check the freeplay and adjust if needed (page

113 ). Make sure the lever operates smoothly without sticking.

Check for proper function (page 20 ).

Headlight and

Headlight Dimmer

Switch

Engine Stop

Switch

Steering

Check for proper function (page 19 ).

Check that the wheels turn properly as you steer the handlebar. Move the handlebar right and left and check that there is no excessive backlash.

Remember, be sure to take care of any problem you find, or have your

Honda dealer correct it before you ride.

Before Riding

37

05/03/22 09:33:39 31HM8840_047

Load Limits & Guidelines

Your Honda was designed as a rider-only ATV. It was not designed to carry a passenger. It can carry cargo on the cargo racks, however, carrying cargo anywhere else or carrying a passenger could interfere with your balance and control of the ATV.

In addition, exceeding the weight limits or carrying an unbalanced load can seriously affect your ATV’s handling, braking and stability. Adding accessories or making modifications that change this ATV’s design and performance can also make it unsafe. Also, the weight of any accessories will reduce the maximum load the ATV can carry.

More specific information on load limits, accessories, and modifications follows.

Loading

How much weight you put on your ATV, and how you load it, are important to your safety. If you decide to carry cargo, you should be aware of the following information.

Overloading, improper loading, or carrying a passenger can cause a crash and you can be seriously hurt or killed.

Follow all load limits and other loading guidelines in this manual.

38

Before Riding

05/03/22 09:33:47 31HM8840_048


Load Limits

Following are the load limits for your ATV:

There are limits to how much weight can be carried on your ATV and be pulled in a trailer.

The following load limits apply to standard equipment only. Modifying your ATV, using non-standard equipment, or riding on terrain that is not flat and smooth could further reduce these limits.

maximum weight capacity 386 lbs (175 kg)

(includes the weight of the rider, all cargo, and accessories.) front cargo rack weight limit rear cargo rack weight limit tow weight limit

(Combined weight of the trailer and all cargo in the trailer) tongue weight

(Weight on the trailer tongue) tongue and rear cargo weight

(Combined weight on the trailer tongue, on the rear cargo rack, and in the storage area)

=

=

=

33 lbs (15 kg)

66 lbs (30 kg)

500 lbs ｛ 225 kgf ｝

(2206 N)

=

=

30 lbs ｛ 14 kgf ｝

(137 N) recommended

66 lbs (30 kg)

Tongue weight can be measured with an ordinary bathroom scale. Place the scale under the tongue, using either a tongue jack or other support to keep the trailer level.

The weight of added accessories will reduce the maximum cargo weight you can carry.

Before Riding

39

05/03/22 09:33:56 31HM8840_049


Loading Guidelines

Carrying cargo or pulling a trailer will affect how your ATV handles and greatly reduce its ability in accelerating, braking and making turns and other maneuvers.

Be sure to observe the weight limits and follow these guidelines:

Check that the tires are properly inflated.

Do not place cargo anywhere on the ATV other than on the front and rear racks. Otherwise, operating stability may be adversely affected.

Never ride with a passenger on the front or rear cargo racks. The

ATV is not designed to carry a passenger.

Load cargo on the rear rack as far forward as possible. Make sure cargo on the front rack does not interfere with handlebar movement.

Do not allow cargo to extend beyond the edges of either the front or rear racks.

Make sure all cargo is secured before riding.

Balance cargo weight evenly on both sides.

Never exceed the maximum weight limit.

When towing a trailer, take care to maintain balance and stability.

Distribute cargo between the front and rear of the trailer to obtain the recommended tongue weight.

Allow extra room for starting, stopping and turning whenever you carry cargo or pull a trailer.

Avoid riding on steep slopes when carrying cargo or pulling a trailer.

Never cross a slope when towing a trailer.

40

Before Riding

05/03/22 09:34:01 31HM8840_050

Accessories & Modifications

Modifying your ATV or using non-Honda accessories can make your

ATV unsafe.

Before you consider making any modifications or adding an accessory, be sure to read the following information.

Improper accessories or modifications can cause a crash in which you can be seriously hurt or killed.

Follow all instructions in this owner’s manual regarding accessories and modifications.

Accessories

We strongly recommend that you use only genuine Honda accessories that have been specifically designed and tested for your ATV. Because

Honda cannot test all other accessories, you must be personally responsible for proper selection, installation, and use of non-Honda accessories.

Check with your Honda dealer for assistance and always follow these guidelines:

Make sure the accessory does not obscure any lights, reduce ground clearance, limit suspension travel or steering travel, or interfere with operating any controls.

Make sure the accessory does not interfere with your ability to shift body position on the seat or operate hand and foot controls.

Do not add any electrical equipment that will exceed the vehicle’s electrical system capacity (page 186 ). A blown fuse can cause a loss of lights or engine power (page 173 ).

Before Riding

41

05/03/22 09:34:05 31HM8840_051

Accessories & Modifications

Modifications

We strongly advise you not to remove any original equipment or modify your ATV in any way that would change its design or operation. Such changes could seriously impair your ATV’s handling, stability, and braking, making it unsafe to ride.

We also advise you not to make any modifications or remove any equipment (such as the USDA qualified spark arrester or emission control system components) that would make your ATV illegal in your area.

Removing or modifying your lights, exhaust system, emission control system, or other equipment can also make your ATV illegal.

42

Before Riding

05/03/22 09:34:10 31HM8840_052

Basic Operation & Riding

This section gives basic riding instructions, including how to start and stop your engine, and how to use the throttle and brakes. It also provides important information on riding with cargo.

To protect your new engine and enjoy optimum performance and service life, refer to Break-in Guidelines (page 188 ).

For information about carburetor adjustment for riding at high altitude, see page 189 .

Safe Riding Precautions .......................................................................

. 45

Off-Road Use Only ..........................................................................

. 45

Keeps Hands and Feet on Controls ..................................................

. 46

Control Speed ...................................................................................

. 47

Use Care on Unfamiliar or Rough Terrain .......................................

. 48

Do Not Perform Stunts .....................................................................

. 49

Starting & Stopping the Engine ...........................................................

. 50

Preparation .......................................................................................

. 50

Starting Procedure ............................................................................

. 51

Flooded Engine ................................................................................

. 54

How to Stop the Engine ...................................................................

. 54

Using the Recoil Starter ...................................................................

. 55

Shifting Gears ......................................................................................

. 56

Riding in Reverse .................................................................................

. 59

(cont’d)


43

05/03/22 09:34:12 31HM8840_053


Braking .................................................................................................

. 61

Riding Your ATV ................................................................................

. 63

Making Turns ...................................................................................

. 63

Skidding or Sliding ..........................................................................

. 65

Riding Up Hills ................................................................................

. 66

Riding Down Hills ...........................................................................

. 70

Crossing or Turning on Hills or Slopes ............................................

. 71

Riding Over Obstacles .....................................................................

. 73

Riding Through Water .....................................................................

. 74

Parking .................................................................................................

. 75

44


05/03/22 09:34:18 31HM8840_054

Safe Riding Precautions

Before riding your ATV for the first time, please review the section beginning on page 1, and the

Bef ore Riding

ATV Saf ety

section beginning on page 29 .

Even if you have ridden other ATVs, take time to become familiar with how this ATV works and handles. Practice in a safe area until you build your skills and get accustomed to the ATV’s size and weight.

Off-Road Use Only

Your ATV and its tires are designed and manufactured for off-road use only, not for pavement. Riding on pavement can affect handling and control. You should not ride your ATV on pavement.

Operating this ATV on paved surfaces may seriously affect handling and control of the ATV, and may cause the vehicle to go out of control.

Never operate the ATV on any paved surfaces, including sidewalks, driveways, parking lots and streets.

When riding off-road, also remember to always obey local off-road riding laws and regulations. Obtain permission to ride on private property. Avoid posted areas and obey ‘‘no trespassing’’ signs.

(cont’d)


45

05/03/22 09:34:22 31HM8840_055


You should never ride your ATV on public streets, roads or highways, even if they are not paved. Drivers of street vehicles may have difficulty seeing and avoiding you, which could lead to a collision. In many states it is illegal to operate ATVs on public streets, roads and highways.

Operating this ATV on public streets, roads or highways could cause you to collide with another vehicle.

Never operate this ATV on any public street, road or highway, even a dirt or gravel one.

Keep Hands and Feet on Controls

Always keep both hands on the handlebars and both feet on the footpegs when riding your ATV. This is important to maintain your balance and to control the vehicle. Removing even one hand from the handlebars or one foot from the footpegs can reduce your ability to control the ATV or could cause you to lose your balance and fall off the ATV.

Removing hands from handlebars or feet from footpegs during operation can reduce your ability to control the ATV or could cause you to lose your balance and fall off of the ATV.

Always keep both hands on the handlebars and both feet on the footpegs of your ATV during operation.

46


05/03/22 09:34:27 31HM8840_056


(1)

(1) foot peg

Control Speed

Riding at excessive speed increases the chance of an accident. In choosing a proper speed, you need to consider the capability of your vehicle, the terrain, visibility and other operating conditions, plus your own skills and experience.

Operating this ATV at excessive speeds increases your chances of losing control of the

ATV, which can result in an accident.

Always go at a speed that is proper for your vehicle, the terrain, visibility and other operating conditions, and your experience.


47

05/03/22 09:34:30 31HM8840_057


Use Care on Unfamiliar or Rough Terrain

Before riding in a new area, always check the terrain thoroughly. Don’t ride fast on unfamiliar terrain or when visibility is limited. (It’s sometimes difficult to see obstructions like hidden rocks, bumps, or holes in time to react.)

Failure to use extra care when operating this

ATV on unfamiliar terrain could result in the ATV overturning or going out of control.

Go slowly and be extra careful when operating on unfamiliar terrain. Always be alert to changing terrain conditions when operating the

ATV.

48


05/03/22 09:34:35 31HM8840_058


Never ride past the limit of visibility. Maintain a safe distance between your ATV and other off-road vehicles. Always exercise caution, and use extra care on rough, slippery and loose terrain.

Failure to use extra care when operating on excessively rough, slippery or loose terrain could cause loss of traction or vehicle control, which could result in an accident, including an overturn.

Do not operate on excessively rough, slippery or loose terrain until you have learned and practiced the skills necessary to control the ATV on such terrain. Always be especially cautious on these kinds of terrain.

Do Not Perform Stunts

You should always operate your ATV in a safe and reasonable manner.

When riding, always keep all four wheels on the ground.

Attempting wheelies, jumps, and other stunts increases the chance of an accident, including an overturn.

Never attempt stunts, such as wheelies or jumps. Don’t try to show off.


49

05/03/22 09:34:42 31HM8840_059

Starting & Stopping the Engine

Always follow the proper starting procedure described below.

For your safety, avoid starting or operating the engine in an enclosed area such as a garage. Your ATV’s exhaust contains poisonous carbon monoxide gas which can collect rapidly in an enclosed area and cause illness or death.

Preparation

(1)

ON

(2)

(3)

(1) fuel valve

(2) ignition switch

(4)

(3) neutral indicator

(4) engine stop switch

1.

Before starting, select a level surface and lock the parking brake

(page 26 ).

2.

1 ).

Confirm the following:

The engine stop switch ( ) is set to RUN ( ).

50


05/03/22 09:34:48 31HM8840_060


Starting Procedure

To restart a warm engine, follow the procedure for

Temperature.’’

‘‘High Air

The starter motor will operate only when the transmission is in neutral.

Normal Air Temperature 10° − 35°C (50° − 95°F)

LEFT HANDLEBAR

(1)

( A )

( B )

( C )

(1) choke knob (A) fully ON

(B) halfway position

(C) fully OFF

1.

2.

the engine is cold.

With the throttle slightly open, press the start button.

Pressing the electric start button for more than 5 seconds at a time may cause the starter to overheat and damage the starter. Release the start button for approximately 10 seconds before pressing it again.

(cont’d)


51

05/03/22 09:34:54 31HM8840_061


3.

Immediately after the engine starts, push the choke knob down to the

4.

5.

Warm up the engine by opening and closing the throttle slightly.

After the engine has warmed up, push the choke knob down all the

6.

If idling is unstable, open the throttle slightly.

High Air Temperature 35°C (95°F) or above

LEFT HANDLEBAR

(1) start button

1.

Do not use the choke.

2.

(1)

52


05/03/22 09:34:58 31HM8840_062


Low Air Temperature 10°C (50°F) or below

1.

2.

Follow steps 1 − 2 under

‘‘Normal Air Temperature.’’

Warm up the engine by opening and closing the throttle slightly.

3.

When the engine begins to run slightly rough, push the choke knob

4.

Continue warming up the engine until it runs smoothly and responds to the throttle, then push the choke knob down all the way to fully

5.

If idling is unstable, open the throttle slightly.

If the engine doesn’t start after pushing the start button several times, use the recoil starter.

Extended use of the choke may impair piston and cylinder wall lubrication and shorten the lif e of the engine.

Do not race the engine during the warm-up period.

Racing a cold engine wastes fuel and increases engine wear.


53

05/03/22 09:35:07 31HM8840_063


Flooded Engine

If the engine fails to start after repeated attempts, it may be flooded with excess fuel. To clear a flooded engine:

1.

2.

3.

4.

Move the engine stop switch to OFF ( ).

Push the choke knob down all the way to fully OFF.

Open the throttle fully.

Press the start button for 5 seconds.

5.

6.

Wait 10 seconds, then turn the engine stop switch to RUN ( ).

Repeat the

‘‘Normal Air Temperature’’

starting procedure, but don’t use the choke.

If the engine still won’t start, refer to

Start,

page 164 .

If Your Engine Quits or Won’t

How to Stop the Engine

Normal Engine Stop

To stop the engine, make sure the transmission is in neutral by checking that the neutral indicator lights, and turn the ignition switch OFF.

The engine stop switch should normally remain in the RUN ( ) position even when the engine is OFF.

If your ATV is stopped with the engine stop switch OFF ( ) and the ignition switch ON ( ), the battery will discharge.

Emergency Engine Stop

To stop the engine in an emergency, use the engine stop switch. To operate, move the switch to either OFF ( ) position.

54


05/03/22 09:35:14 31HM8840_064


Using the Recoil Starter

The recoil starter is used to start the engine when the battery is low.

To operate the recoil starter:

1.

Check that the transmission is in neutral.

2.

3.

4.

4 in (100 mm).

Pull the grip up briskly and fully.

After the engine starts, allow the starter grip to return slowly.

Pull the recoil starter grip straight out so that the cord does not touch the side cover. Repeated contact with the side cover can damage the starter cord.

If the starter grip does not return smoothly (because of dirt in the assembly), see your Honda dealer.

LEFT SIDE

(1)

(1) recoil starter grip


55

05/03/22 09:35:21 31HM8840_065

Shifting Gears

UPSHIFTING SEQUENCE

(A)

DOWNSHIFTING SEQUENCE

(1)

(1) upshift switch

(A) (2)


(A) press

Your ATV has five forward gears: 1, 2, 3, 4, and 5.

Two gearshift switches are located next to the left handlebar grip: upshift ( ) and downshift ( ).

To select reverse, use the reverse selector knob (page 59 ).

After starting the engine and letting it warm up, follow these procedures:

1.

With the transmission in neutral, release the parking brake, but continue squeezing the rear brake lever.

2.

With the throttle closed, press the upshift switch once to shift into 1st gear.

56


05/03/22 09:35:28 31HM8840_066

Shifting Gears

3.

Release the rear brake lever/parking brake lever and increase engine speed by gradually opening the throttle.

4.

When speed increases, release the throttle and shift to 2nd gear by pressing the upshift switch once.

5.

Repeat this sequence to progressively upshift to 3rd, 4th and 5th (top) gear.

6.

To downshift, press the downshift switch once. Remember to close the throttle each time you shift to the next lower gear.

The transmission cannot be upshifted from neutral to first gear when the engine speed is above 3,000 rpm or the ground speed is above 2 mph

(3 km/h).

The transmission cannot be downshifted from 1st gear to neutral when the ground speed is above 2 mph (3 km/h).

If the electric shift system malfunctions, the transmission cannot be shifted by pressing the gearshift switches. See your Honda dealer. (In an emergency, a gear may be selected manually so you may move the vehicle. See

Emergency Gear Selection & Operation,

page 168 ).

Learning when to shift gears comes with experience. Keep the following tips in mind:

As a general rule, shift while moving in a straight line.

Close the throttle completely before shifting. Improper shifting may damage the engine, transmission, and drive train.

Upshift to a higher gear or reduce throttle before engine rpm (speed) gets too high. Learn the relationship between engine sound and the normal shifting points.


57

05/03/22 09:35:33 31HM8840_067

Shifting Gears

Downshift to a lower gear before you feel the engine laboring

(lugging) at low rpm.

Avoid downshifting to help slow your ATV when engine rpm is high.

Downshifting when engine speed is near its allowable maximum may over-rev the engine and cause possible damage.

To prevent transmission damage, do not coast or tow the ATV for long distances with the engine off.

Recommended Shift Points

Ride in the highest gear that lets the engine run and accelerate smoothly.

This will give you good fuel economy and effective emissions control.

58


05/03/22 09:35:38 31HM8840_068

Riding in Reverse

If you need to ride in reverse, make sure the area behind you is clear and only operate the ATV at low speed.

Improperly operating in reverse could cause you to hit an obstacle or person behind you, resulting in serious injury.

Make sure there are no obstacles or people behind you before selecting reverse gear. When it is safe to proceed, go slowly.

1.

Bring the vehicle to a complete stop, then make sure the transmission is in neutral.

2.

Be sure there are no obstacles or people in the way.

3.

4.

5.

once to shift into ‘‘R’’ (Reverse) gear.

Release the rear brake lever/parking brake lever.

Open the throttle gradually and ride slowly. Do not open the throttle suddenly or make abrupt turns.

LEFT HANDLEBAR

(4)

(1)

(2)

(3)

(1) reverse selector knob

(2) rear brake lever/parking brake lever


(4) upshift switch

(cont’d)


59

05/03/22 09:35:42 31HM8840_069

Riding in Reverse

6.

To stop, close the throttle and gradually apply both the front and rear brakes. Do not abruptly apply the rear brake by itself.

7.

once to shift into ‘‘N’’ (neutral) gear.

Applying only the rear brake abruptly when operating in reverse gear could cause the front wheels to lift off the ground and the ATV could overturn backwards.

Carefully apply both the front and rear brakes when stopping in reverse gear.

60


05/03/22 09:35:47 31HM8840_070

Braking

Your ATV is equipped with drum brakes on both front wheels which are hydraulically-activated by operating the front brake lever. A single drum brake on the rear axle housing is mechanically-activated by depressing the brake pedal or operating the rear brake lever/parking brake lever.

As a general rule, the front braking system provides about 70 percent of total stopping power.

For full braking effectiveness, use both the pedal and lever simultaneously. Using both braking systems will stop your ATV faster with greater stability.

To slow or stop, apply the brake lever and brake pedal smoothly, while downshifting to match your speed.

Gradually increase braking as you feel the brakes slowing your speed.

The increase in engine compression from downshifting will help slow your ATV.

Applying the brakes too hard may cause the wheels to lock and slide, reducing control of your ATV. If this happens, release the brake controls, steer straight ahead until you regain control, then reapply the brakes more gently.

When possible, reduce your speed or complete braking before entering a turn. Avoid braking or closing the throttle quickly while turning. Either action may cause one or more wheels to slip and reduce your control of your ATV.


61

05/03/22 09:35:51 31HM8840_071

Braking

Your ability to brake in a turn and to brake hard in an emergency situation are important riding skills.

When descending a long, steep grade, use engine compression braking by downshifting, with intermittent use of both brakes. Continuous brake application can overheat the brakes and reduce their effectiveness.

Riding with your foot resting on the brake pedal or your hands on the brake levers may overheat the brakes, reducing effectiveness.

For information on how to apply the brakes in various riding situations, see the following section,

Riding Your ATV

.

62


05/03/22 09:35:55 31HM8840_072

Riding Your ATV

Making Turns

Learn how to turn your ATV properly. Practice the techniques outlined in this section on level ground and at low speeds until you are confident in making turns.

Turning improperly can make the ATV to go out of control, causing a collision or overturn.

Always follow proper procedures for turning as described in this owner’s manual.

Practice turning at low speeds before attempting to turn at faster speeds.

Do not turn at excessive speeds.


63

05/03/22 09:36:00 31HM8840_073

Riding Your ATV

Lean your body to the inside of a turn and forward.

To make a turn on level ground: Steer the handlebar and lean your body toward the inside of the turn. Leaning helps balance the vehicle, and it feels more comfortable. Leaning into a turn is an important technique to master in riding an ATV.

To make a sharp turn at low speed: It helps to shift your body slightly forward on the seat, and lean inside, as you steer the handlebar. Shifting weight forward allows the rear wheels to turn easier, and it also improves front-wheel steering.

To make a turn from a full stop: Apply the throttle gradually when you turn and start up at the same time. Remember to shift your body forward to make sharp low-speed turns and whenever you turn while accelerating from a full stop.

64


05/03/22 09:36:04 31HM8840_074

Riding Your ATV

Skidding or Sliding

The terrain surface can be a major factor affecting turns. Skidding during a turn is more likely to occur on slippery surfaces, such as snow, ice, mud and loose gravel. If you skid on ice, you may lose all directional control. To avoid skidding on slippery terrain, keep your speed low and ride with caution.

Skidding or sliding improperly may cause you to lose control of this ATV. You may also regain traction unexpectedly, which may cause the

ATV to overturn.

Learn to safely control skidding by practicing at low speeds and on level, smooth terrain.

If your ATV skids sideways during a turn, steer in the direction of the skid. Avoid hard braking or accelerating until you have regained directional control.


65

05/03/22 09:36:08 31HM8840_075

Riding Your ATV

Riding Up Hills

The ATV’s ability to safely climb hills largely depends on the rider’s skill and judgment. Begin by practicing on smooth, gentle slopes. As you gain experience, you’ll learn the hazards and your own limitations.

You may then proceed to ride on more difficult terrain. However, you must be able to decide which hills or hazards might cause the ATV to overturn. Avoid excessively steep hills.

Operating on excessively steep hills can cause the vehicle to overturn more easily than operating on level surfaces or small hills.

Never operate the ATV on hills too steep for the

ATV or for your abilities.

When climbing hills, you must shift weight toward the front wheels to help keep them on the ground. To do this, shift your body slightly forward on the seat and lean forward. For greater weight shift, move your body farther forward and lean forward.

Climbing hills improperly could cause loss of control or cause the ATV to overturn.

Always follow proper procedures for climbing hills as described in this owner’s manual.

66


05/03/22 09:36:13 31HM8840_076

Riding Your ATV

Shift weight forward when climbing hills.

Always check the terrain carefully before you start up any hill.

Never climb hills with excessively slippery or loose surfaces.

To climb a hill, take a running start in an appropriate gear and speed for the conditions. Maintain a steady speed as you ascend the hill.

Never open the throttle suddenly or make sudden gear changes. The

ATV could flip over backward.

Never go over the top of any hill at high speed. An obstacle, a sharp drop, or another vehicle or person could be on the other side of the hill.


67

05/03/22 09:36:20 31HM8840_077

Riding Your ATV

Stalling the ATV and/or Rolling Backwards:

If you incorrectly estimate climbing capability or terrain conditions, the

ATV may not have enough power or traction to continue uphill. If this happen, the ATV can stall and/or roll backwards.

Stalling, rolling backwards or improperly dismounting while climbing a hill could result in the ATV overturning.

Always follow proper procedures for climbing a hill as described in this owner’s manual.

What to do if the ATV stalls or rolls backwards when climbing a hill:

If you are about to lose all forward speed:

1.

Using the front and rear brakes together, bring the ATV to a stop with the vehicle pointed straight uphill.

2.

3.

Get off the ATV while you continue holding the brakes.

Shift into neutral, set the parking brake and turn the engine off.

4.

Then assess the situation.

If the ATV starts rolling backwards before you begin braking:

1.

2.

Keep your weight uphill.

Carefully apply the front brakes first, then carefully apply the rear brake. Do not apply the rear brake only or abruptly if you are rolling backwards, or the vehicle may overturn.

If the ATV continues sliding backwards:

After you’ve applied the brakes, get off and away from the vehicle.

68


05/03/22 09:36:26 31HM8840_078

Riding Your ATV

What to do after the ATV has stalled or rolled backwards:

If the hill is too steep or too slippery, or if you have any doubt whether you can safely walk the ATV back down the hill, leave the vehicle where it is and get help. If possible, block the wheels so the vehicle doesn’t roll backwards.

If the hill is not too steep and you have good footing, you may be able to walk the ATV back down the hill. Make sure your intended path is clear in case you lose control of the ATV.

Be sure your legs are clear of the wheels.

Body position for backing down a hill.

1.

Stand with your body facing downhill, beside the vehicle so you can reach the rear brake lever with your right hand.

2.

3.

Be sure your legs are clear of the wheels.

Check your footing.

4.

Slowly and carefully back the ATV down the hill using the rear brake lever to control speed.

5.

If you lose control of the ATV, for your safety, get away from the vehicle.


69

05/03/22 09:36:31 31HM8840_079

Riding Your ATV

Riding Down Hills

It’s usually advisable to descend hills with the ATV pointed straight downhill. Avoid angles that would cause the vehicle to lean sharply to one side.

Going down a hill improperly could cause loss of control or cause the ATV to overturn.

Always follow proper procedures for going down hills as described in this owner’s manual.

On downhills, shift your weight back.

As you approach a downhill, stop and survey the terrain below. Never ride past the limit of your visibility. Never go down a hill at high speed.

70


05/03/22 09:36:36 31HM8840_080

Riding Your ATV

When you’ve selected a safe downhill path, shift into a lower gear, shift your weight back with your arms extended and braced against the handlebar, then go down slowly with the throttle closed.

Use mainly the rear brake to control speed. Avoid using either the front brake or rear brake hard or abruptly when riding down hills.

Remember, braking effectiveness is reduced on any hill with a loose surface.

Crossing or Turning on Hills or Slopes

Riding on hills or slopes is different from riding on level terrain. Be careful when riding on any hill. Make sure that you practice on gentle, smooth slopes before attempting to ride on steeper or more difficult terrain.

Improperly crossing hills or turning on hills could cause loss of control or cause the ATV to overturn.

Always follow proper procedures for crossing or turning on slopes as described in this Owner’s

Manual. Avoid crossing steep hills if possible.


71

05/03/22 09:36:42 31HM8840_081

Riding Your ATV

Crossing Hills or Slopes

To maintain balance and stability when riding across a slope, you need to shift weight toward the uphill side of the vehicle. To do this, move your body off the center of the seat and lean toward the uphill side.

On a slippery or loose surface, you may also need to steer slightly uphill to maintain a straight course across the slope.

Avoid crossing hills that are excessively steep, slippery or rough.

Shift weight uphill when crossing slopes.

Making Turns on Slopes

Compared to riding on level ground, you may need to shift more weight and lean more when making turns on slopes.

Do not make turns on any slopes until you have first mastered the techniques for making turns on level terrain.

72


05/03/22 09:36:46 31HM8840_082

Riding Your ATV

Riding Over Obstacles

Before operating in a new area, check for obstacles. Watch out for bumps, rain ruts, potholes and other obstacles in the terrain. When you approach any obstacle, reduce your speed and be prepared to stop.

Never try to ride over large obstacles, such as large rocks or fallen logs.

Improperly operating over obstacles could cause loss of control or a collision and could cause the ATV to overturn.

When you go over obstacles, always follow proper procedures as described in this owner’s manual.


73

05/03/22 09:36:53 31HM8840_083

Riding Your ATV

Riding Through Water

Your ATV is designed to travel through water up to approximately

10 inches (254 mm) deep. Before crossing a stream, make sure the water is not too deep or flowing too fast.

The ATV tires have some ability to float.

Operating this ATV through deep or fast-flowing water may cause a loss of traction and loss of control, which could lead to an accident.

Never operate this ATV in fast-flowing water or in water deeper than that specified in this

Owner’s Manual.

1.

Choose a path where both banks have gradual slopes.

2.

3.

Proceed through the water at a slow, steady speed.

Watch out for submerged obstacles and slippery rocks.

4.

5.

Avoid getting the spark plug or air cleaner wet, as this would cause the engine to stop.

After leaving the water, always test both the front and rear brakes.

Riding through water can make the brakes less effective than normal, and may reduce stopping ability.

If necessary, apply the brakes repeatedly until they dry out and operate normally.

If the brakes don’t regain effectiveness, stop your ATV and follow the procedures on page 133 .

74


05/03/22 09:37:02 31HM8840_084

Parking

1.

2.

3.

4.

5.

Look for level parking area. Make sure the ground surface is firm.

After bringing your ATV to a stop, hold the brakes while you shift into neutral.

Set the parking brake.

Turn the ignition switch OFF ( ).

If you’re through riding for the day, turn the fuel valve OFF.

If it is necessary to start the engine when your ATV is stopped on a grade in gear, rock the vehicle back and forth to allow shifting the transmission into neutral.

The brakelights are activated by applying the parking brake. When using the parking brake, be sure to turn the ignition switch OFF ( ) to avoid discharging the battery.

Parking on a Steep Incline or a Loose or Slippery Surface

If you must park your ATV on a steep incline or loose or slippery surface, use the following procedure:

1.

2.

While holding the brakes, set the parking brake.

Turn the ignition switch OFF ( ) and release the brakes.

3.

4.

If the ATV begins to move, either while sitting on it or after you dismount, find a better parking location.

If rocks or other objects are available, you can block the wheels as shown for additional security.


75

05/03/22 09:37:04 31HM8840_085

76


05/03/22 09:37:10 31HM8840_086

Servicing Your Honda

To help keep your ATV in good shape, this section includes a

Maintenance Schedule for required service and step-by-step instructions for specific maintenance tasks. You’ll also find important safety precautions, information on fuels and oils, and tips for keeping your

Honda looking good.

For information about replacing fuses, see page 174 .

For information about the exhaust emission and noise requirements of the U.S. Environmental Protection Agency (EPA) and the California Air

Resources Board (CARB), see page 190 .

USA Only

Maintenance, replacement or repair of the emission control devices and systems may be performed by any ATV repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.

Bef ore You Service Your Honda

The Importance of Maintenance ..........................................................

. 79

Maintenance Safety ..............................................................................

. 80

Important Safety Precautions ...........................................................

. 81

Maintenance Schedule .........................................................................

. 82

Maintenance Record .............................................................................

. 86

Service Preparations

Maintenance Component Locations .....................................................

. 87

Tool Kit ................................................................................................

. 90

Owner’s Manual Storage ......................................................................

. 91

Seat Removal .......................................................................................

. 92


77

05/03/22 09:37:16 31HM8840_087


Service Procedures

Fluids & Filters

Fuel ......................................................................................................

. 93

Engine Oil ............................................................................................

. 96

Gear Case Oil .....................................................................................

. 102

Air Cleaner .........................................................................................

. 104

Engine

Throttle ...............................................................................................

. 109

Carburetor Choke Cable & Knob .......................................................

. 111

Clutch System ....................................................................................

. 112

Reverse Lock System .........................................................................

. 113

Engine Idle Speed ..............................................................................

. 114

Spark Plug ..........................................................................................

. 115

Valves .................................................................................................

. 118

Spark Arrester ....................................................................................

. 119

Chassis

Brakes .................................................................................................

. 120

Tires ...................................................................................................

. 134

Engine Guard & Skid Plates ...............................................................

. 141

Electrical

Battery ................................................................................................

. 142

Appearance Care ................................................................................

. 147

78


05/03/22 09:37:21 31HM8840_088

The Importance of Maintenance

A well-maintained ATV is essential for safe, economical, and troublefree riding. It will also help reduce air pollution. Careful pre-ride inspections and good maintenance are especially important because your

ATV is designed to be ridden over rough off-road terrain.

To help you properly care for your ATV, this section of the manual provides a Maintenance Schedule. The service intervals in this schedule are based on average riding conditions.

More frequent service is needed if you subject your ATV to severe use or ride in unusually wet or dusty areas.

Improperly maintaining this ATV or failing to correct a problem before you ride can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.

Frequent servicing of the air cleaner is especially important to help you avoid a possible costly engine repair.

If your ATV overturns or is involved in a crash, be sure your Honda dealer inspects all major parts, even if you are able to make some repairs.


79

05/03/22 09:37:25 31HM8840_089

Maintenance Safety

This section includes instructions on how to perform some important maintenance tasks. If you have basic mechanical skills, you can perform many of these tasks with the tools provided with your ATV.

Other tasks that are more difficult and require special tools are best performed by professionals. Removing the wheels should normally be handled only by a Honda technician or other qualified mechanic.

Instructions are included in this manual only to assist in emergency service.

Some of the most important safety precautions follow. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner’s manual.

80


05/03/22 09:37:30 31HM8840_090

Maintenance Safety

Important Safety Precautions

Make sure the engine is off before you begin any maintenance or repairs. This will help eliminate several potential hazards:

Carbon monoxide poisoning from engine exhaust.

Be sure there is adequate ventilation whenever you operate the engine.

Burns from hot ATV parts.

Let the engine and exhaust system cool before touching.

Injury from moving parts.

Do not run the engine unless instructed to do so.

Read the instructions before you begin, and make sure you have the tools and skills required.

To reduce the possibility of a fire or explosion, be careful when working around gasoline. Use only non-flammable solvent, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from all fuel-related parts.

Remember that your Honda dealer knows your ATV best and is fully equipped to maintain and repair it. To ensure the best quality and reliability, use only new genuine Honda parts or other equivalents for repair and replacement. If you have the tools and skills required for additional maintenance jobs, you can purchase an official Honda

Service Manual (page 198 ).


81

05/03/22 09:37:34 31HM8840_091

Maintenance Schedule

The required Maintenance Schedule that follows specifies how often you should have your ATV serviced, and what things need attention. It is essential to have your ATV serviced as scheduled to maintain safe, dependable performance and proper emission control.

The service intervals in this Maintenance Schedule are based on average riding conditions. Some items will need more frequent service if you ride in unusually wet or dusty areas or at full throttle. Consult your

Honda dealer for recommendations applicable to your individual needs and use.

Some items in the Maintenance Schedule can be performed with basic mechanical skills and hand tools. Procedures for these items are provided in this manual. Other items involve more extensive procedures and may require special training, tools, and equipment. We recommend that you have your Honda dealer perform these tasks unless you have advanced mechanical skills and the required tools and equipment.

Procedures for such items in this schedule are provided in an official

Honda Service Manual available for purchase (page 198 ).

If you do not feel capable of performing a given task or need assistance, remember that your Honda dealer knows your ATV best and is fully equipped to maintain and repair it. If you decide to do your own maintenance, use only genuine Honda parts or their equivalents for repair or replacement to ensure the best quality and reliability.

82


05/03/22 09:37:40 31HM8840_092


Perform the pre-ride inspection (page 35 ) and owner maintenance on this section at each scheduled maintenance period.

Each item on the maintenance schedule requires some mechanical knowledge. Certain items (particularly those marked

＊ and

＊＊

) may require more technical information and tools. Consult your Honda dealer.

＊

＊＊

Should be serviced by your Honda dealer, unless you have the proper tools and service data and are mechanically qualified. Refer to the official Honda Service Manual (page 198 ).

In the interest of safety, we recommend these items be serviced only by your Honda dealer.

Summary of Maintenance Schedule Notes & Procedures:

NOTES:

1.

2.

Service more frequently when riding in dusty areas, sand or snow.

Service more frequently after riding in very wet or muddy conditions.

3.

Replace every 2 years. Replacement requires mechanical skill.


83

05/03/22 09:37:47 31HM8840_093


Maintenance Procedures:

I: inspect and clean, adjust, lubricate, or replace, if necessary

C: clean

A: adjust

L: lubricate

R: replace

ITEMS

FUEL LINE

FREQUENCY

THROTTLE OPERATION

CARBURETOR CHOKE

AIR CLEANER

AIR CLEANER HOUSING

DRAIN TUBE

SPARK PLUG

VALVE CLEARANCE

ENGINE OIL

ENGINE OIL STRAINER

SCREEN

ENGINE OIL

CENTRIFUGAL FILTER

ENGINE IDLE SPEED

WHICHEVER

COMES

FIRST

NOTE mi km

HOURS

NOTE 1

NOTE 2

INITIAL

MAINT.

100

150

20

REGULAR

MAINT. INTERVAL

600

1000

100

C

I

1200

2000

200

I

C

I

I

I

I

I

I

I

I

INITIAL = 100mi (150km), 20 operating hours or 1 month : R

REGULAR = Every 600mi (1000km),

100 operating hours or 12 months : R

C

I I

C

I

Refer to page

114



−

109

111

104

108

115

118

96

−

−

84


05/03/22 09:37:53 31HM8840_094


ITEMS

FREQUENCY

REAR FINAL GEAR CASE

OIL

BRAKE FLUID

BRAKE SHOE WEAR

BRAKE LIGHT SWITCH

BRAKE SYSTEM

REVERSE LOCK SYSTEM

SKID PLATES, ENGINE

GUARD

CLUTCH SYSTEM

SUSPENSION

SPARK ARRESTER

NUTS, BOLTS,

FASTENERS

WHEELS/TIRES

STEERING SHAFT

HOLDER BEARINGS

STEERING SYSTEM

WHICHEVER

COMES

FIRST

NOTE mi km

HOURS

NOTE 3

NOTE 1

INITIAL

MAINT.

100

150

20

I

I

I

REGULAR

MAINT. INTERVAL

600

1000

100

(R:EVERY 2

1200

2000

200

I

YEARS)

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

C

I

I

I

I

C

I

I

I

Refer to page

102

120

131

132

120

113

141

112

−

119

−

−

−

−




85

05/03/22 09:37:58 31HM8840_095

Maintenance Record

Keeping an accurate maintenance record will help ensure that your ATV is properly maintained. Retain detailed receipts to verify the maintenance was performed. If the ATV is sold, these receipts should be transferred with the ATV to the new owner. Make sure whoever performs the maintenance completes this record. All scheduled maintenance, including the 100 mile (150 km) or 20 hours initial maintenance, is considered a normal owner operating cost and will be charged for by your dealer. Use the space under Notes to record anything you want to remind yourself about or mention to your dealer.

Miles (km) or hours

100 (150) or

20

600 (1,000) or

100

1,200 (2,000) or

200

1,800 (3,000) or

300

2,400 (4,000) or

400

3,000 (5,000) or

500

3,600 (6,000) or

600

4,200 (7,000) or

700

4,800 (8,000) or

800

Date Performed By: Notes

86


05/03/22 09:38:01 31HM8840_096

Maintenance Component Locations

rear brake lever/ parking brake lever choke knob front brake fluid reservoir front brake lever fuel fill cap throttle lever


87

05/03/22 09:38:04 31HM8840_097


air cleaner housing drain tube battery main fuse air cleaner clutch brake pedal/lever adjusting nut rear brake pedal engine oil drain plug engine idle speed

88


05/03/22 09:38:07 31HM8840_098


engine oil filler cap/ dipstick fuel valve spark plug owner’s manual tool kit gear case oil drain plug spark arrester


89

05/03/22 09:38:14 31HM8840_099

Tool Kit

cargo rack.

The tools in the kit are sufficient to perform routine maintenance and simple repairs. Any extensive work requiring additional tools should be performed by your Honda dealer.

The tool kit includes the following items: standard/Phillips screwdriver screwdriver handle spark plug wrench air pressure gauge tool case

REAR SEAT UNDERSIDE

(2) (1)

(1) tool kit

(2) storage compartment

(3)

(3) rubber strap

(4) gear change tool

(4)

90


05/03/22 09:38:18 31HM8840_100

Owner’s Manual Storage

Your ATV provides storage for the owner’s manual so you’ll have it

Be careful not to flood this area when washing your ATV.

SEAT UNDERSIDE

(2)

(1)

(3)

(1) owner’s manual

(2) seat

(4)

(3) spare fuses

(4) plastic document bag


91

05/03/22 09:38:25 31HM8840_101

Seat Removal

Refer to

Saf ety Precautions

on page 81 .

The seat must be removed for air cleaner, battery and fuse maintenance.

(2)

(3)

(5)

(6)

(4)

(1)

(1) seat lock lever

(2) seat

(3) studs

Removal

1.

2.

3.

Slide the seat back and up.

Installation

1.

2.

the studs into the grommets.

Press down on the seat until locks.

92


(4) grommets

(5) front prongs

(6) hooks

05/03/22 09:38:31 31HM8840_102

Fuel

Refer to


on page 81 .

Fuel Recommendation

type pump octane number unleaded

86 (or higher)

We recommend that you use unleaded fuel because it produces fewer engine deposits and extends the life of exhaust system components.

Your engine is designed to use any gasoline that has a pump octane number of 86 or higher. Gasoline pumps at service stations normally display the pump octane number. For information on the use of oxygenated fuels, see page 195 .

Use of lower octane gasoline can cause persistent ‘‘pinging’’ or ‘‘spark knock’’ (a loud rapping noise) which, if severe, can lead to engine damage. Light pinging experienced while operating under a heavy load, such as climbing a hill, is no cause for concern.

If pinging or spark knock occurs at a steady engine speed under normal load, change brands of gasoline. If pinging or spark knock persists, consult your Honda dealer.

Never use stale or contaminated gasoline or an oil/gasoline mixture.

Avoid getting dirt, dust, or water in the fuel tank.


93

05/03/22 09:38:37 31HM8840_103

Fuel

Fuel Capacity

Fuel tank capacity, including reserve:

2.40 US gal (9.1 )

Reserve capacity:

0.63 US gal (2.4 )

The tank should be refilled as soon as possible after switching to reserve, and the fuel valve should be returned to the ON position after refueling to avoid running out of fuel with no reserve.

Refueling Procedure

Refer to


on page 81 .

(3)

(4)

(2)

(1)

(1) fuel fill cap

(2) breather tube

94


(3) handlebar cover hole

(4) filler neck

05/03/22 09:38:42 31HM8840_104

Fuel

1.

2.

3.

Avoid over filling the tank. There should be no fuel in the filler neck.

Gasoline is highly flammable and explosive.

You can be burned or seriously injured when handling fuel.

Stop the engine and keep heat, sparks and flame away.

Handle fuel only outdoors.

Wipe up spills immediately.

4.

After refueling, turn the fuel fill cap clockwise until it clicks.

5.

6.

If the fuel valve was set to RES, turn the fuel valve ON.

If you replace the fuel fill cap, use only a genuine Honda replacement part.


95

05/03/22 09:38:46 31HM8840_105

Engine Oil

Engine oil quality is a major factor that affects both the performance and the service life of the engine.

Using the proper oil (page 97 ) and filter, and regularly checking, adding, and changing oil will help extend your engine’s life. Even the best oil wears out. Changing oil helps get rid of dirt and deposits in the engine. Operating the engine with old or dirty oil can damage your engine. Running the engine with insufficient oil can cause serious damage to the engine and transmission.

Change the engine oil as specified in the maintenance schedule on page

84 . When running in very dusty conditions, oil changes should be performed more frequently than specified in the maintenance schedule.

96


05/03/22 09:38:56 31HM8840_106

Engine Oil

Oil Recommendation

API classification viscosity (weight)

JASO T 903 standard suggested oil

＊

SG or higher except oils labeled as energy conserving on the circular API service label

SAE 10W-40

MA

Pro Honda GN4 or HP4 (without molybdenum additives) 4-stroke oil

(USA & Canada), or Honda 4-stroke oil

(Canada only), or an equivalent motorcycle oil.

＊

Suggested oils are equal in performance to SJ oils that are not labeled as energy conserving on the circular API service label.

Your ATV does not need oil additives. Use the recommended oil.

Do not use oils with graphite or molybdenum additives. They may adversely affect clutch operation.

Do not use API SH or higher oils displaying a circular API ‘‘energy conserving’’ service label on the container. They may affect lubrication and clutch performance.

NOT RECOMMENDED OK

Do not use non-detergent, vegetable, or castor based racing oils.


97

05/03/22 09:39:01 31HM8840_107

Engine Oil

Other viscosities shown in the following chart may be used when the average temperature in your riding area is within the indicated range.

JASO T 903 standard

The JASO T 903 standard is an index for engine oils for 4-stroke motorcycle engines.

There are two classes: MA and MB.

Oil conforming to the standard is labeled on the oil container. For example, the following label shows the MA classification.

(1)

(2)

(1) code number of the sales company of the oil

(2) oil classification

98


05/03/22 09:39:09 31HM8840_108

Engine Oil

Checking & Adding Oil

Refer to


on page 81 .

Check the engine oil level each day before operating your ATV and add if needed.

1.

Park your ATV on a firm, level surface.

2.

Start the engine in a well-ventilated area and let it idle for 3 − 5 minutes. Stop the engine and wait 2

−

3 minutes.

3.

4.

and wipe it clean.

Insert the oil filler cap/dipstick without screwing it in, then remove the oil filler cap/dipstick and check the oil level. The oil level should

5.

the oil filler cap/dipstick.

If required, add the specified oil into the filler cap hole, up to the

6.

upper level mark on the oil filler cap/dipstick. Do not overfill.

Reinstall the oil filler cap/dipstick.

Running the engine with an improper oil level can cause serious engine damage.

LEFT SIDE

(1)

(1) oil filler cap/dipstick

(2)

(3)

(2) upper level mark

(3) lower level mark


99

05/03/22 09:39:15 31HM8840_109

Engine Oil

Changing Engine Oil

Refer to


on page 81 .

This procedure requires mechanical skill and professional tools such as a torque wrench as well as a means for disposing of the drained fluid

(page 160 ). If you do not have the skills or the tools, see your Honda dealer.

Drain the Engine Oil:

1.

With the ATV on the level ground, remove the oil filler cap/dipstick

2.

from the front crankcase cover.

Place an oil drain pan under the crankcase and remove the engine oil

UNDER ENGINE

(2)

(1)

(1) oil drain plug

100


(2) sealing washer

05/03/22 09:39:22 31HM8840_110

Engine Oil

3.

Pour the drained oil into a suitable container and dispose of it in an approved manner (page 160 ).

Improper disposal of drained f luids is harmf ul to the environment.

Add Engine Oil:

1.

Check that the drain plug sealing washer is in good condition. If

2.

necessary, replace the sealing washer.

Reinstall the oil drain plug and tighten it to the specified torque:

18 lbf·ft (25 N·m , 2.5 kgf·m)

3.

Fill the crankcase with the recommended grade oil approximately:

1.6 US qt (1.5 )

4.

Reinstall the oil filler cap/dipstick.

5.

6.

Start the engine and let it idle for 3 − 5 minutes.

Stop the engine and check the oil level. Make sure the oil is between the upper and lower level marks on the oil filler cap/dipstick. If

7.

necessary, add more oil but do not overfill.

Check that there are no oil leaks.

If a torque wrench is not used for installation, see your Honda dealer as soon as possible to verify proper assembly.


101

05/03/22 09:39:28 31HM8840_111

Gear Case Oil

Oil Recommendation

type viscosity (weight) suggested oil hypoid gear oil

SAE 80

Honda shaft drive oil or equivalent

Changing Oil

Refer to


on page 81 .

Changing the oil with the gear case at normal operating temperature to assure complete and rapid draining.

102


05/03/22 09:39:34 31HM8840_112

Gear Case Oil

1.

Park the ATV on level ground.

2.

3.

4.

After the oil has completely drained, reinstall the drain plug and tighten it to the specified torque:

5.

9 lbf·ft (12 N·m , 1.2 kgf·m)

Fill the gear case with the recommended oil.

2.7 US oz (80 cm )

6.

7.

Install the oil filler cap and oil level check bolt.

REAR

(2)

(3)

(4)

(1) oil drain plug

(2) oil filler cap

(1)

(3) oil level check bolt

(4) oil level check hole


103

05/03/22 09:39:40 31HM8840_113

Air Cleaner

Refer to


on page 81 .

Proper air cleaner maintenance is very important for off-road vehicles.

A dirty, water-soaked, worn-out, or defective air cleaner will allow dirt, dust, mud, and other impurities to pass into the engine.

Service the air cleaner more frequently if you ride in unusually wet or dusty areas. Your Honda dealer can help you determine the correct service interval for your riding conditions.

Your ATV’s air cleaner has very specific performance requirements.

Use a new genuine Honda air cleaner specified for your model or an air cleaner of equal quality.

Using the wrong air cleaner may result in premature engine damage.

Proper air cleaner maintenance can prevent premature engine wear or damage, expensive repairs, low engine power, poor gas mileage, and spark plug fouling.

Improper or lack of proper air cleaner maintenance can cause poor perf ormance and premature engine wear.

104


05/03/22 09:39:45 31HM8840_114

Air Cleaner

Cleaning

1.

Remove the seat by pulling the seat lock lever ( ) up (page 92 ).

UNDER SEAT (2)

2.

3.

(1)

(1) seat lock lever

(2) retainer clips

(3)

(3) air cleaner housing cover

(cont’d)


105

05/03/22 09:39:50 31HM8840_115

Air Cleaner

4.

the air cleaner housing.

5.

6.

Remove the air cleaner ( ) from the air cleaner body ( 8 ).

7.

Gently wash the air cleaner in clean, non-flammable (high flash point) solvent such as kerosene − not gasoline. After cleaning, gently squeeze out the remaining solvent. Avoid twisting or wringing the air cleaner. This can tear the foam.

8.

Inspect for tears or cracks in the foam or seams of the air cleaner.

Replace the air cleaner if it is damaged.

9.

Allow the air cleaner to dry thoroughly before applying oil. A wet air cleaner will not fully absorb the oil.

10.

Pour clean Pro Honda Foam Filter Oil or an equivalent (Canada:

Honda Foam Filter Oil or an equivalent) over the entire surface of the air cleaner. Use both hands to evenly spread the oil into the air cleaner.

Gently squeeze out any excess oil. (To keep your hands dry, place the air cleaner in a clean plastic bag before spreading the oil into the air cleaner.)

UNDER SEAT

(4) (8)

(4) screws

(5) air cleaner assembly

(6) clamp

(5)

106


(6)

(7) air cleaner

(8) air cleaner body

(7)

05/03/22 09:39:54 31HM8840_116

Air Cleaner

11.

Install the air cleaner on the air cleaner body.

12.

Apply a thin coat of grease to the sealing surface of the air cleaner assembly.

13.

Install the clamp.

14.

Insert the air cleaner assembly into the air cleaner housing.

15.

Fasten the screws.

Dust Cover

UNDER SEAT

(1)

(2)

(1) dust cover

If the dust cover is dirty, clean it.

(2) air cleaner housing


107

05/03/22 09:39:58 31HM8840_117

Air Cleaner

Air Cleaner Housing Drain Tube

The air cleaner housing drain tube should be serviced in accordance with the Maintenance Schedule. (Riding through water may require more frequent inspection.) If deposits can be seen in the drain tube, the tube must be cleaned before starting the vehicle.

REAR

(2)

(3)

(1)

(1) drain tube

(2) clip

(3) air cleaner housing

1.

2.

3.

Drain the deposits.

Reinstall the drain tube, securing it with the clip.

108


05/03/22 09:40:05 31HM8840_118

Throttle

Throttle Freeplay

Refer to


on page 81 .

RIGHT HANDLEBAR

( A )

( B )

1/8

−

5/16 in

(3

−

8 mm)

(2) (3) (4) (1)

(1) throttle lever

(2) rubber sleeve

(3) throttle cable adjuster

Inspection

Freeplay:

1/8 − 5/16 in (3 − 8 mm)

(4) lock nut

(A) decrease freeplay

(B) increase freeplay

Adjustment

1.

2.

3.

4.

5.

Turn the adjuster to obtain the correct freeplay.

Tighten the lock nut and reinstall the sleeve.

After adjustment, check for smooth operation of the throttle lever from fully closed to fully open in all steering positions.


109

05/03/22 09:40:11 31HM8840_119

Throttle

Throttle Inspection

Refer to


on page 81 .

1.

Check that the throttle assembly is positioned properly and the securing bolts are tight.

2.

Check for smooth operation of the throttle lever from fully open to fully closed in all steering positions. If there is a problem, see your

3.

Honda dealer.

Inspect the condition of the throttle cables from the throttle lever

4.

5.

down to the carburetor. If the cable is kinked or chafed, have it replaced.

Check the cables for tension or stress in all steering positions.

Lubricate the cables with a commercially-available cable lubricant to prevent premature wear and corrosion.

110


05/03/22 09:40:15 31HM8840_120

Carburetor Choke Cable & Knob

Refer to


on page 81 .

LEFT HANDLEBAR

(2)

(1)

(1) choke cable (2) choke knob

1.

2.

If the cable is damaged or kinked, have it replaced by your Honda dealer.


111

05/03/22 09:40:21 31HM8840_121

Clutch System

Your ATV’s shift-activated, wet, multiplate clutch is part of the primary drive system. Proper adjustment allows a smooth, gradual engagement when shifting gears.

Clutch Adjustment

Refer to


on page 81 .

FRONT

(1)

(2)

(1) lock nut (2) clutch adjuster

1.

Make sure the ignition switch is OFF ( ).

2.

3.

4.

resistance.

Turn the adjuster 1/4 turn clockwise, then tighten the lock nut to hold

5.

the adjuster in this position.

After adjustment, start the engine and test ride your ATV to be sure the clutch is operating properly.

If you cannot get proper adjustment, or the clutch does not work properly, the clutch friction discs may be worn. See your Honda dealer or refer to official Honda Service Manual (page 198 ).

112


05/03/22 09:40:27 31HM8840_122

Reverse Lock System

Reverse Lock System Adjustment

Refer to


on page 81 .

LEFT HANDLEBAR

(3)

( B )

( A )

1/16

−

3/16 in

(2

−

4 mm)

(1)

(2)

(4)

(1) reverse assist lever


(3) lock nut

(4) adjusting nut

(A) decrease freeplay

(B) increase freeplay

1.

1/16 − 3/16 in (2 − 4 mm)

2.

After adjustment, tighten the lock nut securely.

Other Checks

Check the reverse assist lever and cable for loose connections or other damage. If the cable is worn or kinked, have it replaced by your Honda dealer.


113

05/03/22 09:40:34 31HM8840_123

Engine Idle Speed

The best way to assure proper carburetion is to see your Honda dealer for regularly scheduled servicing, including carburetor adjustment.

Remember, idle speed adjustment is not a ‘‘cure-all’’ for other problems in your engine’s fuel-delivery system. Adjusting the idle will not compensate for a fault elsewhere.

The engine must be at normal operating temperature for accurate idle speed adjustment.

For information about high altitude carburetor adjustment, see page 189 .

Idle Speed Adjustment

Refer to


on page 81 .

RIGHT SIDE

(1)

(1) throttle stop screw

2.

3.

4.

5.

1.

If the engine is cold, start it and warm it up with ten minutes of stopand-go riding. Stop the engine.


Connect a tachometer to the engine.

Shift into neutral. Start the engine.

Idle speed (in neutral):

1,400 ± 100 rpm

114


05/03/22 09:40:43 31HM8840_124

Spark Plug

Spark Plug Recommendation

standard spark plug for cold climate

(below 5°C, 41°F) for extended high speed riding

DPR8EA-9 (NGK)

DPR7EA-9 (NGK)

DPR9EA-9 (NGK) or

X24EPR-U9 (DENSO) or

X22EPR-U9 (DENSO) or

X27EPR-U9 (DENSO)

Use only the recommended type of spark plug in the recommended heat range.

Using spark plugs with an improper heat range can cause engine damage.

Spark Plug Replacement & Inspection

Refer to


on page 81 .

1.

Clean any dirt from around the spark plug base.

2.

3.

spark plug wire when disconnecting the cap.

Using the spark plug wrench, remove the spark plug.

(1)

(1) spark plug cap

(cont’d)


115

05/03/22 09:40:47 31HM8840_125

Spark Plug

4.

Inspect the electrodes and center porcelain for deposits, corrosion, or carbon fouling. If the corrosion or deposits are heavy, replace the plug. Clean a carbon or wet-fouled plug with a plug cleaner, if available, or a wire brush. Inspect the spark plug electrodes for wear.

5.

Discard the spark plug if there is apparent wear or if the insulator is cracked or chipped.

6.

insulator tip appear unusually fouled or burned, we suggest that you contact your Honda dealer.

adjustment is necessary, bend the side electrode carefully.

The gap should be:

0.03

− 0.04 in (0.8

− 0.9 mm)

(3)

(2)

(4)

0.03

−

0.04 in

(0.8

−

0.9 mm)

(2) center electrode

(3) side electrode

(4) spark plug gap

116


05/03/22 09:40:52 31HM8840_126

Spark Plug

7.

With the plug washer attached, thread the spark plug in by hand to prevent cross-threading.

8.

Tighten the spark plug:

If the old plug is good:

1/8 turn after it seats.

If installing a new plug, tighten it twice to prevent loosening: a) First, tighten the plug:

NGK:

DENSO:

3/4


turn after it seats.

b) Then loosen the plug.

c) Next, tighten the plug again:


Improperly tightened spark plug can damage the engine. If a plug is too loose, a piston may be damaged. If a plug is too tight, the threads may be damaged.

9.

Connect the spark plug cap.


117

05/03/22 09:40:57 31HM8840_127

Valves

Valve Inspection

Refer to


on page 81 .

Valve clearance should be:

0.005 in (0.13 mm)

Excessive clearance will cause noise. Insufficient clearance will cause loss of power and possibly damage the valves.

For those who are mechanically proficient and have the proper tools, instructions on adjusting valve clearances are given in the official

Honda Service Manual. All others should have valves adjusted by your

Honda dealer.

118


05/03/22 09:41:02 31HM8840_128

Spark Arrester

Refer to


on page 81 .

The spark arrester must be serviced every 100 operating hours to maintain its efficiency.

Regular servicing prevents carbon build up (which can diminish engine performance) and also complies with USDA regulations for regular maintenance to assure proper function. The spark arrester prevents random sparks from the combustion process in your engine from reaching the environment.

The use of safety glasses is recommended for this procedure.

Because of the possible fire hazard, check that there are no combustible materials in the area before purging the spark arrester.

REAR

(1)

(1) bolt

1.

Select a well-ventilated area free of combustible materials and make sure the exhaust pipe is cool.

2.

3.

4.

5.

Start the engine and rev it up approximately twenty times while momentarily creating exhaust system back pressure by blocking the end of the muffler with a shop towel.

Stop the engine and allow the exhaust pipe to cool.

Reinstall the bolt securely.


119

05/03/22 09:41:07 31HM8840_129

Brakes

The hydraulic drum brakes (front) and single mechanical drum brake

(rear) on your ATV dissipate heat generated by the friction of the brake shoes on the drums as the wheels are slowed.

As the front brake shoes wear, brake fluid level will drop. A leak in the system will also cause the level to drop.

Inspect the system before each ride to ensure there are no fluid leaks.

Periodically inspect the brake fluid level and front and rear brake shoes for wear.

If the brake lever or brake pedal freeplay does not feel within the normal range while riding, check the brake shoes for wear (page 131 ).

Worn shoes should be replaced. If the shoes are not worn beyond the recommended limit, there is probably air in the brake system. See your

Honda dealer to have the air bled from the system.

Brake Fluid Recommendation

brake fluid Honda DOT 3 or DOT 4 Brake Fluid

The recommended brake fluid is Honda DOT 3 or DOT 4 Brake Fluid, or any brake fluid of equal quality and performance. Use fresh brake fluid from a sealed container. Be sure to read the label before opening the sealed container. An opened container may be contaminated or may have absorbed moisture from the air.

120


05/03/22 09:41:12 31HM8840_130

Fluid Level Inspection

Refer to


on page 81 .

RIGHT HANDLEBAR

Brakes

(1)

(1) LOWER level mark

If your inspection indicates a low fluid level, have your Honda dealer add the recommended fluid.

Do not add or replace brake fluid, except in an emergency. If you do add fluid, have your Honda dealer check the system as soon as possible.

Brake f luid can damage plastic and painted surf aces. Handle with care.


121

05/03/22 09:41:16 31HM8840_131

Brakes

Wipe up spills immediately. Avoid contact with skin or eyes. In case of contact, wash thoroughly and call a doctor immediately if it contacts your eyes.

Other Inspections

Make sure there are no fluid leaks.

Check for deterioration or cracks in the hoses and fittings. If the hoses are worn or cracked, have them replaced by your Honda dealer.

122


05/03/22 09:41:21 31HM8840_132

Brakes

Front Brake Lever Freeplay & Shoe Lining Clearance

RIGHT HANDLEBAR

(1)

1

−

1 3/16 in

(25

−

30 mm)

(1) front brake lever

1.

Measure the distance the brake lever moves before the brakes start to should be:

1 − 1 3/16 in (25 − 30 mm)

(cont’d)


123

05/03/22 09:41:28 31HM8840_133

Brakes

2.

3.

Standard:

Service Limit:

0.16 in (4.0 mm)

0.08 in (2.0 mm)

If either lining is worn beyond the limit, both brake shoes must be replaced by your Honda dealer.

4.

If the brake lever freeplay and the brake shoe lining thickness are within the recommended limits, reinstall the inspection hole plugs,

5.

seating them into the inspection hole as shown.

If the brake lever freeplay is excessive but the linings are not worn beyond the service limit, adjust the brake lining clearance.

(4)

(5)

(3)

(2)

(2)

(2) inspection hole plug

(3) lining thickness

(4) front brake drum

(5) front wheel rim

124


05/03/22 09:41:34 31HM8840_134

Brakes

To adjust the brake lining clearance:

1.

Squeeze the brake lever firmly two or three times, then release it.

2.

Raise the front and rear wheels off the ground by placing a support block under the vehicle.

3.

Beginning with either the left or right front wheel, remove the inspection hole plug and line up the hole with one of the brake adjusters.

4.

brake locks.

(1)

(1) brake shoe adjuster

(cont’d)


125

05/03/22 09:41:38 31HM8840_135

Brakes

5.

Back the adjuster off three clicks, then squeeze the brake lever several times. Spin the wheel manually to make sure the brake does not drag.

6.

Line up the inspection hole with the second adjuster and repeat steps

7.

8.

9.

3 through 5 .

Reinstall the inspection hole plug, seating it into the inspection hole as shown.

Follow steps 3 through 7 to adjust the other front brake.

Recheck the brake lever freeplay. If freeplay is still excessive after adjusting the brake lining clearance, there is probably air in the brake system and it must be bled out. See your Honda dealer for this service.

126


05/03/22 09:41:43 31HM8840_136

Brakes

Rear Brake Pedal Freeplay

RIGHT SIDE

9/16

−

13/16 in

(15

−

20 mm)

(1)

(1) rear brake pedal

Inspection starts to take hold. Freeplay, measurement at the tip of the end of the pedal, should be:

9/16 − 13/16 in (15 − 20 mm)

If necessary, adjust to the specified range.


127

05/03/22 09:41:46 31HM8840_137

Brakes

Adjustment

RIGHT REAR

(3)

(2)

(2) brake pedal adjusting nut

(3) brake arm pin rod at the rear of the frame. Make sure the cutout on the adjusting nut is

128


05/03/22 09:41:51 31HM8840_138

Brakes

Rear Brake Lever Freeplay

LEFT HANDLEBAR

(1)

9/16

−

13/16 in

(15

−

20 mm)

(1) rear brake lever/parking brake lever

Inspection moves before the brake starts to take hold. Freeplay, measurement at the tip of the end of the brake lever, should be:

9/16 − 13/16 in (15 − 20 mm)

If necessary, adjust to the specified range.


129

05/03/22 09:41:56 31HM8840_139

Brakes

Adjustment

RIGHT REAR

(3)

(2)

(2) brake lever adjusting nut

(3) brake arm pin rod at the rear of the frame. Make sure the cutout on the adjusting nut is

Other Inspection

Check that the brake lever and brake pedal assemblies are positioned properly and the securing bolts are tight.

Make sure that the brake cables, brake arm, spring, and fasteners are in good condition.

130


05/03/22 09:42:01 31HM8840_140

Brakes

Brake Shoe Wear

Refer to


on page 81 .

The rear brake is equipped with an external brake wear indicator that lets you check brake wear without disassembly. Application of the brake control causes the arrow on the brake arm to move toward a reference mark on the brake panel.

RIGHT REAR

(2)

(3)

(1)

(3) reference mark (1) arrow

(2) brake arm

1.

2.

Replace the brake shoe if the arrow aligns with the reference mark replacement is necessary, see your Honda dealer.


131

05/03/22 09:42:06 31HM8840_141

Brakes

Brakelight Switch Adjustment

Refer to


on page 81 .

Rear Brake Only: behind the engine from time to time. The brakelight should turn on at

0.6 in (15 mm) of pedal stroke. See

Rear Brake Pedal Freeplay

, page

127 switch operates too soon.

RIGHT SIDE

(2)

( A )

(1)

( B )

(1) brakelight switch (2) adjusting nut

132


05/03/22 09:42:12 31HM8840_142

Draining Water from Brakes

Refer to


on page 81 .

Brakes

(1)

(2)

(1) front brake inspection hole plug

(2) rear brake drain bolt

1.

Make sure the engine is off and the parking brake is set.

2.

3.

brake cover.

If any water drains, the brake seals must be replaced by your Honda dealer as soon as possible.


133

05/03/22 09:42:16 31HM8840_143

Tires

To safely operate your ATV, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated.

Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.

Follow all instructions in this owner’s manual regarding tire inflation and maintenance.

This ATV is equipped with low pressure tubeless tires. Although the tires are designed specifically for off-road use, they are not immune to punctures. Always select your riding area with care.

The following pages give detailed information on how and when to check your air pressure, how to inspect your tires for wear and damage, and our recommendations for tire repair and replacement.

134


05/03/22 09:42:20 31HM8840_144

Tires

Air Pressure

Refer to


on page 81 .

Properly inflated tires provide the best combination of handling, tread life, and riding comfort. Generally, underinflated tires wear unevenly, adversely affect handling, and are more likely to fail from being overheated. Overinflated tires make your ATV ride harshly, are more prone to damage from surface hazards, and wear unevenly.

Make sure the valve stem caps are secure. If necessary, install a new cap.


135

05/03/22 09:42:28 31HM8840_145

Tires

Always check air pressure when your tires are ‘‘cold.’’ If you check air pressure when your tires are ‘‘warm’’ − even if your ATV has only been ridden for a few miles − the readings will be higher. If you let air out of warm tires to match the recommended cold tire pressures, the tires will be underinflated. Be sure to check tire pressure at the riding site, since changes in altitude can affect air pressure.

The recommended ‘‘cold’’ tire pressures are:

RECOMMENDED

PRESSURE

MAXIMUM

PRESSURE

MINIMUM

PRESSURE

RECOMMENDED

PRESSURE

FRONT REAR

2.9 psi (20 kPa ,

0.20 kgf/cm )

2.9 psi (20 kPa ,

0.20 kgf/cm )

3.3 psi (23 kPa ,

0.23 kgf/cm )

3.3 psi (23 kPa ,

0.23 kgf/cm )

2.5 psi (17 kPa ,

0.17 kgf/cm )

2.5 psi (17 kPa ,

0.17 kgf/cm )

2.9 psi (20 kPa ,

0.20 kgf/cm )

2.9 psi (20 kPa ,

0.20 kgf/cm )

136


05/03/22 09:42:34 31HM8840_146

Tires

A manually operated tire pump should be used rather than the high pressure system found in service stations. This will minimize the possibility of tire damage from overinflation. If you use a high pressure system at a service station, add air in small amounts and check the pressure increase frequently to prevent possible tire damage from overinflation.

Operating this ATV with improper tires, or with uneven tire pressure may cause loss of control, and you could be seriously injured or killed.

Always use the size and type tires specified in this owner’s manual for this vehicle.

Always maintain proper tire pressure as described in this owner’s manual.

Inspection

Refer to


on page 81 .

Whenever you check the tire pressures, you should also look for:

Bumps or bulges in the side of the tire or the tread. Replace any tire that has a bump or bulge.

Cuts, slits, or cracks in the tires. Replace the tire if you can see fabric or cord.

Nails or other foreign objects embedded in the side of the tire or tread.

Excessive tread wear.


137

05/03/22 09:42:41 31HM8840_147

Tires

Also, if you hit a pothole or other hard object while riding, stop as soon as you safely can and carefully inspect the tires for damage.

Tread Wear

Front

Rear

(1)

3/16 in

(4 mm)

NEW

(2)

Replace

(3)

(1) groove depth

(2) wear indicator

(3) wear indicator location mark

For best performance, you should replace a tire before the tread depth at the center reaches the following limits: front rear

3/16 in (4 mm)

3/16 in (4 mm)

138


05/03/22 09:42:46 31HM8840_148

Tires

Tire Repair

Refer to


on page 81 .

A tire that is repaired, either temporarily or permanently, will have lower speed and performance limits than a new or undamaged tire.

A temporary repair can sometimes be made in an emergency situation.

However, since a temporary repair may not hold, you must ride very slowly, preferably without any cargo, and have the tire replaced or permanently repaired as soon as possible. (For more information on temporary repairs, see

If You Have a Flat Tire,

page 171 .)

A permanent repair, such as an internal plug patch, can be made if a tire has only a small puncture in the tread area. However you may not be able to safely carry as much weight. If you choose to have a tire repaired, be sure the repair work is performed by a professional.

If you have a tire professionally repaired at a non-Honda facility, we recommend that you have the work checked by your Honda dealer.


139

05/03/22 09:42:54 31HM8840_149

Tires

Tire Replacement

Refer to


on page 81 .

The tires that came on your ATV were designed to match the performance capabilities of your ATV and provide the best combination of handling, braking, and comfort.

It is best to replace all four tires, however if that is not possible, you must replace the tires in pairs (front or rear) with tires of the same size and type as the originals. Never replace just one tire.

Installing improper tires on your ATV can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed.

Always use the size and type of tires recommended in this owner’s manual.

The recommended tires for your ATV are: front rear

AT22

AT22

×

×

7-11

10-9

★

★

GOOD YEAR TRACKER HP


When you replace a tire, remember:

Have the tire replaced by your Honda dealer if possible.

If you have a tire professionally replaced at a non-Honda facility, we recommended that you have the work checked by your Honda dealer.

140


05/03/22 09:42:59 31HM8840_150

Engine Guard & Skid Plates

Refer to


on page 81 .

(1) engine guard

(1)

(2)

(2) skid plates guard and plates for cracks, damage or looseness at intervals shown in the Maintenance Schedule.

Have the skid plates replaced if they are cracked or damaged. If the plate bolts are loose, tighten them securely.


141

05/03/22 09:43:04 31HM8840_151

Battery

Your ATV has a maintenance-free type battery. You do not have to check the battery electrolyte level or add distilled water as you would with a conventional-type battery.

Your battery is a maintenance-f ree type and can be permanently damaged if the cap strip is removed.

Electrical accessories use current from the battery –– even when the ignition is OFF. Limited operation also allows the battery to discharge.

If you have electrical accessories on your ATV –– or do not ride frequently, we recommend that you charge the battery frequently (see

Battery Charging,

page 146 ).

If you do not expect to ride your ATV for at least two weeks, we recommend you remove the battery –– or at least disconnect the battery cables (negative cable first).

If you plan to store your ATV, see

Battery Storage,

page 143 .

If your battery seems weak and/or is leaking electrolyte (causing slow starting or other electrical problems), see your Honda dealer.

WARNING:

Battery posts, terminals and related accessories contain lead and lead compounds.

Wash your hands after handling.

142


05/03/22 09:43:10 31HM8840_152

Battery

Battery Storage

Refer to


on page 81 .

If you plan to store your ATV, we recommend you remove the battery and store it where it can be charged at least every 30 days to maintain its service life.

If you do not remove the battery, we recommend disconnecting the battery cables (negative cable first).

You will get the best storage results from removing the battery and slow

(trickle) charging it every 30 days (see

Battery Charging,

page 146 ).

Before you remove the battery, be sure to read all the information that follows, as well as the information on the battery label.

The battery gives off explosive hydrogen gas during normal operation.

A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you.

Wear protective clothing and a face shield, or have a skilled mechanic do the battery maintenance.


143

05/03/22 09:43:16 31HM8840_153

Battery

The battery is located in a compartment under the seat.

UNDER SEAT

(4)

(1)

(2)

(3)

(1) rubber band

(2) negative ( − ) terminal lead

(3) battery

(4) positive ( ＋ ) terminal lead

Removal

1.

Make sure the ignition switch is OFF ( ).

2.

3.

Remove the seat (page 90 ).

4.

Disconnect the negative (

−

2 first, then disconnect the positive (

＋

4

5.

Remove the battery.

3

144


05/03/22 09:43:21 31HM8840_154

Battery

6.

Charge the battery (see following section), unless you have been riding regularly.

7.

Store your battery in an easy-to-reach location off the floor, in an area protected from freezing temperature and direct sunlight.

8.

Clean the battery box after removing the battery for storage. Dry the battery box and, if paint is missing, re-paint the area.

9.

Slow charge the battery (see following section) once every 30 days.

Installation

1.

Reinstall in the reverse order of removal.

Be sure to connect the positive (

＋

) terminal first, then the negative

(

−

) terminal.

2.

Check all bolts and other fasteners are secure.


145

05/03/22 09:43:26 31HM8840_155

Battery

Battery Charging

Refer to


on page 81 .

(1)

(1) ‘‘trickle’’ charger

Be sure to read the information that came with your battery charger and follow the instructions on the battery. Improper charging may damage the battery.

units can be left connected for long periods without risking damage to the battery. However, do not intentionally leave the charger connected longer than the time period recommended in the charger’s instructions.

Avoid using an automotive-type battery charger. An automotive charger can overheat an ATV battery and cause premature damage.

146


05/03/22 09:43:33 31HM8840_156

Appearance Care

Frequent cleaning and polishing will keep your Honda looking newer longer.

Frequent cleaning also identifies you as an owner who values his ATV.

A clean ATV is also easier to inspect and service.

General Recommendations

Refer to


on page 81 .

To clean your ATV, you may use:

− water

− a mild, neutral detergent and water

− a mild spray and wipe cleaner/polisher

− a mild spray and rinse cleaner/degreaser and water

Avoid products that contain harsh detergents or chemical solvents that could damage the metal, paint, and plastic on your ATV.

If your ATV is still warm from recent operation, give the engine and exhaust system time to cool off.

Park in a shady area. Washing your ATV in bright sunlight may cause the finish to fade because water droplets intensify the sun’s brightness.

Spotting is also more likely because surface water can dry before you have time to wipe it off.

Clean your ATV regularly to protect surface finishes.

We recommend the use of a garden hose to wash your ATV. High pressure washers (like those at coin-operated car washers) can damage certain parts of your ATV.

High pressure water (or air) can damage certain parts of your ATV.

After cleaning, inspect for damage, wear, and leaks (fuel, oil and brake fluid).


147

05/03/22 09:43:40 31HM8840_157

Appearance Care

Washing Your ATV with a Mild Detergent

Refer to


on page 81 .

1.

2.

Rinse your ATV thoroughly with cool water to remove loose dirt.

Fill a bucket with cool water. Mix in a mild, neutral detergent, such as dish washing liquid or a product made especially for washing motorcycles or automobiles.

3.

Wash your ATV with a sponge or soft towel. As you wash, check for heavy grime. If necessary, use a mild cleaner/degreaser to remove the

4.

grime.

After washing, rinse your ATV thoroughly with plenty of clean water

5.

to remove any residue. Detergent residue can corrode alloy parts.

Dry your ATV with a chamois or a soft towel. Leaving water on the

6.

surface to air dry can cause dulling and water spots. As you dry, inspect for chips and scratches.

Start the engine and let it idle for several minutes. The engine heat will help dry moist areas.

7.

As a precaution, ride your ATV at a slow speed and apply the brakes several times. This will help dry the brakes and restore normal braking performance.

If the inside of the headlight lens appears clouded immediately after washing, it should clear after a few minutes of riding.

148


05/03/22 09:43:48 31HM8840_158

Appearance Care

Spray Cleaning Your ATV

Refer to


on page 81 .

Avoid using spray cleaner products on the tires or suspension components.

Suggestions for using spray cleaner(s) follow:

ATV condition

Dust and fingerprint smudges.

Light road grimes.

Heavy grime. Oil leaks.

Brake dust.

Dull, corroded chrome or aluminum.

Recommended Cleaning

Apply a spray cleaner/polish and wipe paint, chrome, glass, and clear plastic.

Spray any difficult-to-reach or very dirty areas with a spray cleaner/ degreaser.

Rinse and dry.

Apply a spray cleaner/polish and wipe with a non-abrasive cloth.

Use a spray cleaner/degreaser. If necessary, rub with a sponge.

Rinse and dry.

Apply a spray cleaner/polish and wipe with a non-abrasive cloth.

Apply a high quality chrome/ aluminum polish and wipe with a non-abrasive cloth.


149

05/03/22 09:43:53 31HM8840_159

Appearance Care

Finishing Touches

Refer to


on page 81 .

After washing your ATV, consider using a commercially-available spray cleaner/polish or quality liquid or paste wax to finish the job. Use only a non-abrasive polish or wax made specifically for motorcycles or automobiles. Apply the polish or wax according to the instructions on the container.

If a surface on your ATV is chipped or scratched, your Honda dealer has touch-up paint to match your ATV’s color. Be sure to use your

ATV’s color code (page 183 ) when you buy touch-up paint.

If the frame has a chip that exposes the metal, first apply primer (to prevent corrosion) and then apply the touch-up paint. Several thin layers of touch-up paint are better than one thick coat.

150


05/03/22 09:43:55 31HM8840_160

Tips

Here’s helpful advice on how to prepare for an off-road adventure, how to transport and store your Honda, and how to be an environmentally responsible ATV owner.

Preparing for a Ride ...........................................................................

. 152

What to Take to The Riding Area ..................................................

. 152

What to Take on The Trail .............................................................

. 153

Transporting Your Honda ..................................................................

. 154

Storing Your Honda ...........................................................................

. 156

Preparation for Storage ..................................................................

. 157

Removal from Storage ...................................................................

. 159

You & the Environment .....................................................................

. 160

Tips

151

05/03/22 09:44:02 31HM8840_161

Preparing for a Ride

A safe and enjoyable ride begins with good planning and preparation.

Always ride with at least one other person in case you have trouble, and let someone know where you’re going and when you expect to return.

Before riding in an unfamiliar area, find out in advance if you need special permits, get maps so you can study the terrain, and talk to other riders who know the area. The Forest Service and the Bureau of Land

Management (USA only), the Ministry of Natural Resources (Canada only), riding clubs, and off-road magazines are good sources of information.

What to Take to the Riding Area

Along with your ATV and riding gear, you should take along some tools and supplies in case you have a problem. For some of the difficulties you might encounter, see

Taking Care of the Unexpected,

which begins on page 161 .

We recommend that you always take water, food, a first aid kit, and your owner’s manual. Other items you should consider loading on your truck or trailer include: a tool kit tire repair supplies and tools, and tires extra parts, control levers, cables, and spark plugs wire, duct tape, and rope extra gasoline

For safety, all refueling should be done at a gas station on the way to the riding area or at your base camp.

152

Tips

05/03/22 09:44:06 31HM8840_162

Preparing for a Ride

What to Take on the Trail

What you take with you during a ride depends on the kind of terrain, how long you expect to ride, how far you might go from your base camp or help, and how experienced you or your companions are in making repairs.

If you decide to take some tools, spare parts, or other supplies on the trail, be sure you can carry them safely and know how to use them. Also, be sure to follow the loading guidelines and weight limit (page 39 ).

Tips

153

05/03/22 09:44:10 31HM8840_163

Transporting Your Honda

Do not tow your ATV behind a car or other vehicle.

When you transport your ATV, we recommend that you carry the vehicle in its normal operating position (on all four wheels). Do not incline the vehicle upright on its rear end. This can damage the vehicle, and leaking gasoline could be a hazard.

Follow these procedures:

1.

2.

Set the parking brake.

Turn the fuel valve OFF.

154

Tips

05/03/22 09:44:15 31HM8840_164

Transporting Your Honda

3.

Secure the vehicle with ‘‘tie-down straps’’ in the areas shown.

Suitable ‘‘tie-down straps’’ are available from your Honda dealer.

4.

Ordinary rope is not recommended because it can stretch under load.

Using ‘‘tie-down straps’’ in any other areas can damage your ATV.

Rock the vehicle back and forth to make sure the ‘‘tie-down straps’’ are tight and the vehicle is secure.

(1)

(4)

(2)

(1) front cargo rack

(2) right footpeg

(3) (4)

(3) left footpeg

(4) rear cargo rack or rear axle shaft

Tips

155

05/03/22 09:44:19 31HM8840_165

Storing Your Honda

If you won’t be riding for an extended period, such as during the winter, thoroughly inspect your ATV and correct any problem before storing it.

That way, needed repairs won’t be forgotten and it will be easier to get your ATV running again.

For more information about storage, refer to the

Winter Storage Guide,

Honda Motorcycle

available from your Honda dealer (USA only).

We suggest you perform the following procedures to keep your ATV in top condition. These storage procedures will reduce the deterioration that can occur during storage.

156

Tips

05/03/22 09:44:25 31HM8840_166


Preparation for Storage

Refer to


on page 81 .

This procedure requires a means for draining and disposing of drained fuel (page 160 ).

1.

2.

Change the engine oil (page 100 ).

3.

4.

Fill the fuel tank. Make sure the fuel fill cap is properly installed.

Check that the fuel valve is OFF.

Drain the carburetor into an approved gasoline container and dispose of it in an approved manner (page 160 ).

If storage will last longer than one month, carburetor draining is important, to assure proper performance after storage.

Gasoline is highly flammable and explosive.

You can be burned or seriously injured when handling fuel.

Stop the engine and keep heat, sparks and flame away.

Handle fuel only outdoors.

Wipe up spills immediately.

(cont’d)

Tips

157

05/03/22 09:44:33 31HM8840_167


5.

To prevent rusting in the cylinders, perform the following:

Remove the spark plug cap from the spark plug.

Remove the spark plug.

Do not connect the spark plug to the spark plug cap.

Pour a tablespoon (15 − 20 cc) of clean engine oil into cylinder and cover the spark plug hole with a piece of cloth.

With the engine stop switch in the OFF ( ) position, press the

6.

start button several times to crank the engine and distribute the oil.

Reinstall the spark plug and spark plug cap.

Remove the battery and charge it fully. Store it in an area protected from freezing temperatures and direct sunlight. Slow charge the battery (page 146 ) once a month.

The battery gives off explosive hydrogen gas during normal operation.

A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you.

Wear protective clothing and a face shield, or have a skilled mechanic do the battery maintenance.

7.

Wash and dry your ATV. Wax all painted surfaces.

8.

9.

Inflate the tires to their recommended pressures (page 136 ).

Store your ATV in an unheated area, free of dampness, away from sunlight, with a minimum of daily temperature variation.

10.

Place your ATV on blocks to lift all tires off the floor.

11.

Cover your ATV with a porous material. Avoid using plastic or similar non-breathing, coated materials that restrict air flow and allow heat and moisture to accumulate.

158

Tips

05/03/22 09:44:38 31HM8840_168


Removal from Storage

Refer to


on page 81 .

1.

Uncover and clean your ATV.

2.

If your ATV has been stored for more than four months − change

3.

the engine oil (page 100 ).

If your ATV has been stored for more than two months − ask your

Honda dealer to drain and replace the fuel.

4.

5.

Charge the battery (page 146 ) as required. Install the battery.

Perform a pre-ride inspection (page low speeds.

35 ), then test-ride your ATV at

Tips

159

05/03/22 09:44:43 31HM8840_169

You & the Environment

Owning and riding an ATV can be enjoyable, but you must do your part to protect nature. When you show respect for the land, wildlife, and other people, you also help preserve the sport of off-road riding.

Following are tips on how you can be an environmentally-responsible

ATV owner.

Tread Lightly.

Stay on existing roads and trails, avoid surfaces that are easily damaged, and ride only in areas approved for off-road vehicles.

Keep the Noise Down.

Loud vehicles can be offensive. Ride as quietly as possible, don’t remove your spark arrester, and don’t modify the muffler or any other part of your air intake and exhaust systems. Such modifications not only increase noise, they also reduce engine performance and may be illegal.

Choose Sensible Cleaners.

Use a biodegradable detergent when you wash your ATV. Avoid aerosol spray cleaners that contain chlorofluorocarbons (CFCs) which damage the atmosphere’s protective ozone layer. Don’t throw cleaning solvents away; see the following guidelines for proper disposal.

Recycle Wastes.

It’s illegal and thoughtless to put used engine oil in the trash, down a drain, or on the ground. Used oil, gasoline, and cleaning solvents contain poisons that can hurt refuse workers and contaminate our drinking water, lakes, rivers, and oceans. Before changing your oil, make sure you have the proper containers. Put oil and other toxic wastes in separate sealed containers and take them to a recycling center. Call your local or state office of public works or environmental services to find a recycling center in your area, and to get instructions on how to dispose of non-recyclable wastes.

160

Tips

05/03/22 09:44:46 31HM8840_170

Taking Care of the Unexpected

With all the challenges you can encounter off-road, there’s a chance that sometime something may go wrong. This section gives practical advice to help you deal with a wide range of problems. Take time to read this section before you ride. Also review the tips in

Preparing f or a Ride

(page 152 ).

General Guidelines .............................................................................

. 162

If Your Engine Quits or Won’t Start ..................................................

. 164

If the Shift Switches Do Not Function ..............................................

Emergency Gear Selection & Operation ...........................................

. 167

. 168

If You Have a Flat Tire .....................................................................

. 170

If a Fuse Blows ..................................................................................

. 173

If You Crash .......................................................................................

. 174

If You Lose Your Key .......................................................................

. 177

If the Battery Is Low (or Dead) .........................................................

. 178

If a Component Fails ..........................................................................

. 179


161

05/03/22 09:44:52 31HM8840_171


General Guidelines

Keeping your ATV well-maintained is the best way to reduce the possibility of having a problem while riding. However, problems can arise even with well-maintained machines.

Remember to take along your owner’s manual, the tool kit that came with your ATV, and any other items (such as tire repair supplies and additional tools) that might help you solve a problem on your own.

If something goes wrong during a ride, the first thing to do is stop as soon as you safely can. Do not continue riding if you have a flat tire, or you hear an unusual noise, or your ATV just doesn’t feel right. If you continue riding, you could cause more damage and endanger your own safety.

After a stop, take time to assess the situation. Carefully inspect your

ATV to identify the problem, then consider your options before you decide what to do.

If a problem is relatively minor and you have the tools, supplies, and skills to make a permanent repair, you may be able to fix it on the trail and continue riding. Or, you may be able to make a temporary repair that allows you to slowly ride back to your base where you can make a permanent repair or get help.

When a problem is more serious

− or you don’t have the tools, supplies, experience, or time to deal with it − you need to choose the safest way to get yourself and your ATV back to base. For example, if you are close enough, you (or you and another person) might be able to push it back.

162


05/03/22 09:44:56 31HM8840_172


Should you ever have a problem while riding, please follow these guidelines:

Always put personal safety first.

Take time to assess the situation and your options before deciding what to do.

If the problem is relatively minor and you have the tools, supplies, and skills to make a temporary repair, be sure to have permanent repairs made as soon as possible.

Do not continue riding if you are hurt or your ATV is not in safe riding condition.

Additional recommendations for specific problems follow.


163

05/03/22 09:45:00 31HM8840_173

If Your Engine Quits or Won’t Start

Proper operation and maintenance can prevent starting and engine performance problems. In many cases, the cause of the problem may be a simple operational oversight.

If you have a problem starting the engine − or experience poor engine performance − the following information may help you. If you can’t correct the problem, see your Honda dealer.

If your ATV won’t start, listen as you press the start button. If you don’t hear the starter motor turning, refer to the

Starter motor doesn’t operate

symptom. If you can hear the starter motor working normally, refer to the

Starter motor works, but the engine won’t start

symptom.

164


05/03/22 09:45:14 31HM8840_174


SYMPTOM:

Starter motor doesn’t operate.

POSSIBLE CAUSE WHAT TO DO ignition switch OFF transmission not in

Turn the ignition switch ON.

Shift into neutral.

neutral blown fuse battery lead loose dead battery

Replace with a new fuse of the same rating (page 173 ).

Tighten the battery lead.

Charge the battery (page 146 ).

faulty starter motor

If charging doesn’t help, see your

Honda dealer.

If all possible causes are negative, the starter motor may be faulty. See your Honda dealer.

SYMPTOM:

Starter motor works, but the engine won’t start.

POSSIBLE CAUSE engine stop switch

OFF out of fuel flooded engine

WHAT TO DO

Turn the engine stop switch to RUN.

Fill the fuel tank.

See

F looded Engine

(page 54 ).

Install the spark plug cap securely. If loose or unconnected spark plug cap loose battery cables weak battery the engine still won’t start, see your

Honda dealer.

Tighten the battery terminal bolts.

Charge the battery (page 146 ). If charging doesn’t help, see your

Honda dealer.


165

05/03/22 09:45:23 31HM8840_175


SYMPTOM:

Engine starts, but runs poorly.

POSSIBLE CAUSE WHAT TO DO idles roughly, too fast, stalls

Check engine idle adjustment (page

114 ). If the problem persists, see your Honda dealer.

Ask your Honda dealer to modify the poor engine performance at altitudes above

3,000 feet (1,000 m).

carburetion with a high altitude jet.

Refer to

High Altitude Car bur etor

Adjustment,

page 189 .

See your Honda dealer.

runs erratically, misfires blubbers (rich fuel mixture) sooty exhaust (rich fuel mixture) detonates or pings under load afterfires (backfires)



If applicable, switch to the recommended octane gasoline

(page 93 ) or change your brand of gasoline. If the problem persists, see your Honda dealer.


pre-ignition (runs on after ignition switched OFF)


166


05/03/22 09:45:29 31HM8840_176

If the Shift Switches Do Not Function

If one or both shift switches do not function, see the following instructions. If proper function cannot be restored, see your Honda dealer.

When the engine is running:

1.

Stop the ATV.

2.

3.

Turn the ignition switch to the ‘‘OFF’’ ( ) position.

After the engine stops, turn the ignition switch to the ‘‘ON’’ ( )

4.

5.

position.

Press both shift switches and check that they are functioning.

If both switches are functioning, shift into neutral and restart the engine.

If one or both switches are not functioning, see

Emergency Gear

Selection & Operation,

page 168 .

When the engine is stopped (ignition switch at ‘‘ON’’ ( )):

1.

Turn the ignition switch to the ‘‘OFF’’ ( ) position.

2.

3.

Turn the ignition switch to the ‘‘ON’’ ( ) position.

Press both shift switches and check that they are functioning.

4.

If both switches are functioning, shift into neutral and restart the engine.

If one or both switches are not functioning, see

Emergency Gear

Selection & Operation,

page 168 .

When the battery is low (or dead):

See

If the Battery is Low (or Dead),

page 170 .


167

05/03/22 09:45:33 31HM8840_177

Emergency Gear Selection & Operation

If the shift switches do not operate, use the following procedure to manually select a gear so you may drive the vehicle to a location where it can be loaded and transported to a Honda dealer.

1.


2.

3.

Remove the gear change tool from underside of the seat (page

Check the neutral indicator.

If the transmission is in neutral, go to step 4.

90 ).

If the transmission is not in neutral, use the gear change tool to shift to neutral so you will be able to start the engine, Refer to

How to Shif t

Gears Manually

(page 169

Apply the parking brake.

).

4.

5.

Press the start button to start the engine.

6.

Select the gear you want. For running on level ground: use 3rd or 4th gear. For mountainous roads: use 2nd or 3rd gear. Refer to

How to

7.

8.

Shif t Gears Manually

(page 169 ).

Store the gear change tool underside of the seat.

Get on the ATV. Drive it at a safe speed to a place where it can be repaired or serviced.

The manual shift procedure is intended for emergency use only, when the shift switches do not operate.

Continued or abusive manual shif ting using the change tool may damage the gear change mechanism.

168


05/03/22 09:45:38 31HM8840_178

Emergency Gear Selection & Operation

How to Shift Gears Manually:

( A )

( B )

(A) downshift (counterclockwise)

(B) upshift (clockwise)

With the ATV unoccupied, align the hexagonal hole of the gear change tool with the hexagonal end of the secondary spindle which is located near the left footpeg.

Use slow, steady hand pressure to turn the spindle. (Do not use foot pressure) To downshift, turn the gear change tool counterclockwise

If the transmission does not shift, rock the vehicle back and forth and try again.

Store the gear change tool underside of the seat.

Do not attempt to shift gears manually using the gear change tool while driving.

If the transmission is shifted manually when the electric shift system is functioning, the system will shutdown automatically and the shift switches will not operate. To reactivate the system, turn the ignition switch to the ‘‘OFF’’ ( ) position, then turn it back to the ‘‘ON’’

( ) position.


169

05/03/22 09:45:44 31HM8840_179

If You Have a Flat Tire

How you handle a flat tire on the trail depends on how serious the tire damage is, and what tools and supplies you have with you.

If you have a slow leak or a minor puncture, use the plug method to make a temporary repair. (The plug method is applied from the outside of the tire and is the same as that for conventional tubeless tires.)

A plug-type repair kit, available at most auto parts stores or service stations, provides a plug, an installation tool, tire cement, and an instruction sheet. Follow the instructions provided with the repair kit to make a temporary repair.

As soon as possible, have the tire permanently repaired by your Honda dealer. Any tire that cannot be repaired should be replaced.

Whenever the ATV is to be operated far from service facilities or available transportation, we recommend that you carry a tire pump and a repair kit with the vehicle.

If the leak is more serious, or a temporary repair doesn’t hold, the tire must be replaced. The tire will also need to be replaced if it is damaged

(page 140 ). Replacing a tire involves removing and re-installing the wheel (page 171 ).

If you are unable to repair a flat tire on the trail, you will need to send for help. We strongly recommend that you do not try to ride with a flat tire. The ATV will be hard to handle, and if the tire comes off the rim, it may lock up the wheel and cause you to crash.

170


05/03/22 09:45:50 31HM8840_180


Emergency Wheel Removal/Installation

Refer to


on page 81 .

(1)

(2)

(1)

(1) wheel nuts (2) wheel rim

Removal

1.

2.


Raise the front (or rear) wheels off the ground and place a support block under the vehicle.

3.

4.

Remove the wheel.


171

05/03/22 09:45:54 31HM8840_181


Installation

1.

Position the wheel.

2.

Position the wheel nuts so that the tapered sides face the wheel rim

3.

Tighten the wheel nuts in a crisscross (rather than a circular) pattern to the specified torque:

47 lbf·ft (64 N·m , 6.5 kgf·m)

If a torque wrench was not used for installation, see your Honda dealer as soon as possible to verify proper assembly. Improper assembly may lead to loss of braking capability.

172


05/03/22 09:46:01 31HM8840_182

If a Fuse Blows

All of the electrical circuits on your ATV have fuses to protect them from damage caused by excess current flow (short circuit or overload).

If something electrical on your ATV stops working, the first thing you

Check all the fuses before looking elsewhere for another possible cause of the problem. Replace any blown fuses and check component operation.

(1)

(1) blown fuse

The main fuses is located in the battery compartment.

A spare fuse is located in the owner’s manual storage area under the seat

(page 91 ).

Recommended Fuses main fuse shift motor fuse

15 A

30 A


173

05/03/22 09:46:06 31HM8840_183

If a Fuse Blows

Main and Shif t Motor Fuse Access

UNDER SEAT

(5) (4)

(2)

(3)

(1)

(1) fuse

(2) fuse holder assembly

(3) fuse holder

(4) main fuse holder assembly

(5) shift motor fuse holder assembly

1.

2.

3.

To prevent an accidental short circuit, turn the ignition switch OFF

( ) before checking or replacing the fuses.

To access the fuse ( ), remove the seat (page 92 ).

4.

5.

6.

Push the new fuse in to the fuse holder.

Install the fuse holder assembly and seat.

174


05/03/22 09:46:10 31HM8840_184

If a Fuse Blows

If you do not have a replacement fuse with the proper rating for the circuit, install one with a lower rating.

Replacing a f use with one that has a higher rating greatly increases the chance of damage to the electrical system.

If you do not have a spare fuse and you cannot ride the ATV without fixing the problem, take a fuse of the same rating or a lower rating from one of the other circuits that you can do without temporarily.

If you replace a blown fuse with a spare fuse that has a lower rating, replace the fuse with the correct rating as soon as you can. Also remember to replace any spare fuses that were installed.

If the replacement fuse of the same rating burns out in a short time, there is probably a serious electrical problem on your ATV. Leave the blown fuse in that circuit and have your ATV checked by your Honda dealer.


175

05/03/22 09:46:14 31HM8840_185

If You Crash

Personal safety is your first priority after an accident. If you or anyone else has been injured, take time to assess the severity of the injuries and whether it is safe to continue riding. If you cannot ride safely, send someone for help. Do not ride if you will risk further injury.

If you decide you are capable of riding safely, carefully inspect your

ATV for damage and determine if it is safe to ride. Check the tightness of critical nuts and bolts securing such parts as the handlebar, control levers, brakes, and wheels.

If there is minor damage, or you are unsure about possible damage but decide to try riding the ATV back to your base, ride slowly and cautiously.

Sometimes, crash damage is hidden or not immediately apparent. When you get home, thoroughly check your ATV and correct any problems you find. Also, be sure to have your Honda dealer check the frame and suspension after any serious crash.

176


05/03/22 09:46:18 31HM8840_186

If You Lose Your Key

at the rear of the manual. You’ll need this number to have a duplicate key made.

If you lose your key and aren’t carrying a duplicate, either get your spare or have one made. If you don’t know your key number, call the dealer you purchased your Honda from. They may have it listed in their records. If they don’t, transport your ATV to them or the nearest Honda dealer. The dealer will probably have to remove the ignition switch assembly to find the key number so they can make a key for you.

(1)

(1) key number


177

05/03/22 09:46:23 31HM8840_187

If the Battery Is Low (or Dead)

Your ATV will operate even if the battery is low (or dead), as long as the engine is running. If the engine is not running, it may be started using the recoil starter.

1.


2.

3.

Remove the gear change tool from underside of the seat (page 90 ).

Check if the transmission is in neutral by moving the vehicle back and forth.

4.

If the transmission is in neutral, the vehicle will move easily. Go to step 5.

If the transmission is not in neutral, the vehicle will not move. Use the gear change tool to shift to neutral so you will be able to start the engine. Refer to

How to Shif t Gears Manually

(page

5.

6.

7.

back to the ‘‘ON’’ ( ) position.

Use the recoil starter (page 55 ) to start the engine.

169 ).

Apply the parking brake.

Turn the ignition switch to the ‘‘OFF’’ ( ) position, then turn it

Jump starting is not recommended, especially if you use an automobile battery. The greater amperage of an automobile battery when the car engine is running can damage your ATV’s electrical system.

Bump starting is also not recommended.

If you can’t charge the battery or it appears unable to hold a charge, contact your Honda dealer.

178


05/03/22 09:46:27 31HM8840_188

If a Component Fails

The brake levers or pedal, control cables, and other components can be damaged as you ride in dense brush or over rocky terrain. Making a trailside repair depends on how serious the damage is and what tools and supplies you have with you.

If any component of the brake system is damaged, you may be able to ride carefully back to your base using the other brake components for slowing or stopping.

If you damage a throttle cable or other critical component, your ATV may be unsafe to ride. Carefully assess the damage and make any repairs that you can. But if there is any doubt, it’s best to be conservative and safe.


179

05/03/22 09:46:28 31HM8840_189

180


05/03/22 09:46:31 31HM8840_190

Technical Information

This section contains dimensions, capacities, and other technical data, plus information on government requirements and how to break-in your

ATV.

Vehicle Identification .........................................................................

. 182

Specifications .....................................................................................

. 184

Break-in Guidelines ...........................................................................

. 188

High Altitude Carburetor Adjustment ................................................

. 189

Emission Control Systems ..................................................................

. 190

Oxygenated Fuels ...............................................................................

. 194


181

05/03/22 09:46:36 31HM8840_191

Vehicle Identification

Serial Numbers

The frame and engine serial numbers and key number may be required when ordering replacement parts. You may record these numbers in the

Quick Reference section at the rear of this manual.

FRONT

(1) frame number

(1)

RIGHT SIDE

(2)

(2) engine number

182


05/03/22 09:46:40 31HM8840_192

Vehicle Identification

Color Label & Code

seat (page 92 ) to check the label.

The color code is helpful when ordering replacement parts. You may record the color and code in the Quick Reference section at the rear of this manual.

UNDER SEAT

(1)

(1) color label


183

05/03/22 09:46:50 31HM8840_193

Specifications

Dimensions

overall length overall width overall height wheelbase ground clearance

Fuel & Lubricants

fuel recommendation fuel tank capacity fuel tank reserve engine oil capacity engine oil recommendation

75.0 in (1,905 mm)

40.7 in (1,035 mm)

42.1 in (1,070 mm)

44.5 in (1,130 mm)

6.0 in (152 mm) unleaded gasoline, pump octane number of 86 or higher

2.40 US gal (9.1 ) including reserve

0.63 US gal (2.4 ) after disassembly:

2.0 US qt (1.9 ) after draining:

1.6 US qt (1.5 )

API Service Classification SG or higher except oils labeled as energy conserving on the circular API service label, SAE 10W-40, JASO T

903 standard MA,

Pro Honda GN4 or HP4 (without molybdenum additives) 4-stroke oil

(USA & Canada) or Honda 4-stroke oil (Canada only), or an equivalent motorcycle oil

184


05/03/22 09:47:07 31HM8840_194

Specifications

Capacities

passenger capacity maximum weight capacity operator only

386 lbs (175 kg) rider, all cargo and accessories

Engine Specifications

displacement bore & stroke compression ratio spark plug

(standard) spark plug

(cold climate) spark plug

(high speed riding) spark plug gap valve clearance

(cold) idle speed

14.0 cu-in (229 cm )

2.70

× 2.45 in (68.5

× 62.2 mm)

9.2 : 1

DPR8EA-9 (NGK) or X24EPR-U9 (DENSO)

DPR7EA-9 (NGK) or X22EPR-U9 (DENSO)

DPR9EA-9 (NGK) or

X27EPR-U9 (DENSO)

0.03

− 0.04 in (0.8

− 0.9 mm)

0.005 in (0.13 mm)

1,400 ± 100 rpm

Power Transmission

primary reduction final reduction gear ratio

1st

2nd

3rd

4th

5th reverse final drive

3.087

3.692

3.231

2.167

1.667

1.280

1.042

5.550

shaft


185

05/03/22 09:47:20 31HM8840_195

Specifications

Chassis & Suspension

caster trail tire size, front tire size, rear tire pressure, front & rear (cold) maximum tire pressure, front & rear (cold) minimum tire pressure, front & rear (cold)

Electrical

battery generator

Lights

headlight (Low/High) brake/tail light neutral indicator reverse indicator

8°

1.7 in (42 mm)

AT22 × 7-11 ★


AT22 × 10-9 ★


2.9 psi (20 kPa , 0.20 kgf/cm )

3.3 psi (23 kPa , 0.23 kgf/cm )

2.5 psi (17 kPa , 0.17 kgf/cm )

12 V − 10 AH

0.123 kW/5,000 rpm

12 V 25/25 W × 2

LED

12 V − 1.7 W

12 V − 1.7 W

186


05/03/22 09:47:25 31HM8840_196

Specifications

Fuses

main shift motor

15 A

30 A

Torque Specification

oil drain bolt rear final gear case oil drain bolt wheel nuts

18 lbf·ft (25 N·m, 2.5 kgf·m)

9 lbf·ft (12 N·m, 1.2 kgf·m)

47 lbf·ft (64 N·m, 6.5 kgf·m)


187

05/03/22 09:47:28 31HM8840_197

Break-in Guidelines

Help assure your ATV’s future reliability and performance by paying extra attention to how you ride during the first operating day or 15 miles

(25 km).

During this period, avoid full-throttle starts, rapid acceleration, and constant RPM operation.

188


05/03/22 09:47:32 31HM8840_198

High Altitude Carburetor Adjustment

At high altitude, the standard carburetor air-fuel mixture will be too rich.

Performance will decrease, and fuel consumption will increase. A very rich mixture will also foul the spark plug and cause hard starting.

Operation at an altitude that differs from that at which this engine was certified, for extended periods of time, may increase emissions.

High altitude performance can be improved by specific modifications to the carburetor. If you always operate your engine at altitudes above

6,500 feet (2,000 meters), have your servicing dealer perform this carburetor modification. This engine, when operated at high altitude with the carburetor modifications for high altitude use, will meet each emission standard throughout its useful life.

Even with carburetor modification, engine horsepower will decrease about 3.5% for each 1,000-foot (300-meter) increase in altitude. The effect of altitude on horsepower will be greater than this if no carburetor modification is made.

When the carburetor has been modif ied f or high altitude operation, the air-f uel mixture will be too lean f or low altitude use. Operation at altitudes below 5,000 f eet (1,500 meters) with a modif ied carburetor may cause the engine to overheat and result in serious engine damage. For use at low altitudes, have your servicing dealer return the carburetor to original f actory specif ications.


189

05/03/22 09:47:36 31HM8840_199

Emission Control Systems

Exhaust Emission Requirements (USA only)

The U.S. Environmental Protection Agency (EPA) and the California

Air Resources Board (CARB) require that your ATV comply with applicable exhaust emission standards during its useful life, when operated and maintained according to the instructions provided.

right side of the frame below the front fender.

FRONT

(1)

(1) vehicle emission control infomation label

190


05/03/22 09:47:40 31HM8840_200


Source of Exhaust Emissions

The combustion process produces carbon monoxide (CO), oxides of nitrogen (NOx) and hydrocarbons (HC). Control of hydrocarbons and oxides of nitrogen is very important because, under certain conditions, they react to form photochemical smog when subjected to sunlight.

Carbon monoxide does not react in the same way, but it is toxic.

Honda Motor Co., Ltd. utilizes various systems to reduce carbon monoxide, oxides of nitrogen and hydrocarbons.

Exhaust Emission Control System

The exhaust emission control system is composed of appropriate carburetor settings. No adjustments should be made except for an idle speed adjustment with the throttle stop screw or carburetor adjustment for high altitude operation.

The exhaust emission control system is separate from the crankcase emission control system.


191

05/03/22 09:47:45 31HM8840_201


Crankcase Emission Control System

The engine is equipped with a closed crankcase system to prevent discharging crankcase emissions into the atmosphere. Blow-by gas is returned to the combustion chamber through the air cleaner and the carburetor.

Problems That May Affect ATV Exhaust Emissions

If you are aware of any of the following symptoms, have the vehicle inspected and repaired by your Honda ATV dealer.

Symptoms:

1.

Hard starting or stalling after starting

2.

Rough idle

3.

4.

Misfiring or backfiring during acceleration

After-burning (backfiring)

5.

Poor performance (driveability) and poor fuel economy

Federal regulations prohibit removing or disabling a device or element of design that may affect your engine’s emission performance unless your ATV will be used exclusively in competition. If you modify your engine for use in sanctioned competition events, you must deface or destroy the emission control information label.

192


05/03/22 09:47:49 31HM8840_202


Noise Emission Control System

TAMPERING WITH THE NOISE CONTROL SYSTEM IS

PROHIBITED:

State laws prohibit, or Canadian provincial laws may prohibit the inoperative by any person, other than for purposes of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or the vehicle after such device or element of design has been removed or rendered inoperative by any person.

AMONG THOSE ACTS PRESUMED TO CONSTITUTE

TAMPERING ARE THE FOLLOWING ACTS:

1.

Removal of, or puncturing the muffler, baffles, header pipes or any

2.

3.

4.

other component which conducts exhaust gases.

Removal of, or puncturing of any part of the intake system.

Lack of proper maintenance.

Replacing any moving parts of the vehicle, or parts of the exhaust or intake system, with parts other than those specified by the manufacturer.


193

05/03/22 09:47:54 31HM8840_203

Oxygenated Fuels

Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States and

Canada use oxygenated fuels to help reduce emissions.

If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement.

Before using an oxygenated fuel, try to confirm the fuel’s contents.

Some states/provinces require this information to be posted on the pump.

The following are the EPA-approved percentages of oxygenates:

ETHANOL (ethyl or grain alcohol) 10% by volume

You may use gasoline containing up to 10% ethanol by volume.

Gasoline containing ethanol may be marketed under the name

‘‘Gasohol’’.

MTBE (Methyl Tertiary Butyl Ether) 15% by Volume

You may use gasoline containing up to 15% MTBE by volume.

METHANOL (methyl or wood alcohol) 5% by Volume

You may use gasoline containing methanol containing up to 5% methanol by volume as long as it also contains cosolvents and corrosion inhibitors to protect the fuel system. Gasoline containing more than 5% methanol by volume may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of your fuel system.

194


05/03/22 09:47:58 31HM8840_204

Oxygenated Fuels

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the percentages of oxygenates mentioned above are not covered under warranty.

Oxygenated fuels can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank. Wipe up any spills immediately.

Oxygenated f uels can damage paint and plastic. Damage caused by spilled f uel is not covered by warranty.


195

05/03/22 09:47:59 31HM8840_205

196


05/03/22 09:48:02 31HM8840_206

Consumer Information

This section contains information on your warranty and how to get an official Honda service manual.

Authorized Manuals ...........................................................................

. 198

Warranty Coverage ............................................................................

. 201

Warranty Service ................................................................................

. 202

Contacting Honda ..............................................................................

. 203

Your Honda Dealer ............................................................................

. 204

The Honda Rider’s Club (USA only) .................................................

. 205


197

05/03/22 09:48:08 31HM8840_207

Authorized Manuals

The Service Manual used by your authorized Honda dealer is available from Helm, Inc. (USA only, Canada: See your Honda dealer to order authorized manuals.)

Also available but not necessary to service your model is the Honda

Common Service Manual which explains theory of operation and basic service information for various systems common to all Honda motorcycles, motor scooters and ATVs.

These Honda manuals are written for the professional technician, but most mechanically-capable owners should find them easy to use if they have the proper tools and observe proper safety standards.

Special Honda tools are necessary for some procedures.

Publication Item No.

61HM851

61CM002

31HM8840

Description

2006 TRX250TM/TE Service Manual

Common Service Manual

2006 TRX250TE Owner’s Manual

＊

Prices are subject to change without notice and without incurring obligation.

Price Each

＊

$40.00

$48.00

$16.00

198


05/03/22 09:48:14 31HM8840_208

Order On-Line: www.helminc.com

Order Toll Free: 1-888-CYCLE93

(1-888-292-5393)

(NOTE: For Credit Card Orders Only)

Monday − Friday 8:00 AM − 6:00 PM EST

OR

By completing this form you can order the materials desired. You can pay by check or money order, or charge to your credit card. Mail to

Helm, Inc. at the address shown on the back of this order form (USA only).

Canada: See your Honda dealer to order authorized manuals.

Publication

Item No.

Item Description Qty.

Price Each

＊

Total

Price

＊

Prices are subject to change without notice and without incurring obligation.

Orders are mailed within 10 days. Please allow adequate time for delivery.

Sub Total

Purchaser’s Sales Tax

Mich. Add 6 %

Calif. Add 8.25 %

Handling Charge

Grand Total

$5.00


199

05/03/22 09:48:25 31HM8840_209

NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention the shipment should be sent.

S

H

I

P

T

O

Customer Name

Attention

Street Address

City

Daytime Telephone Number

( )

State

Apartment Number

Zip Code

Check or money order enclosed payable to Helm Inc. U. S. funds only. Do not send cash.

P

A

Y

M

E

N

T

Check here if your billing address is different from the shipping address shown above.

VISA MasterCard Discover

Account Number Expiration: Mo. Yr.

−

Customer Signature Date

These Publications cannot be returned for credit without receiving advance authorization within 14 days of delivery. On returns, a restocking fee may be applied against the original order.

HELM

P. O. BOX 07280, DETROIT, MICHIGAN 48207

200


05/03/22 09:48:29 31HM8840_210

Warranty Coverage

Your new Honda is covered by these warranties:

TRX Limited Warranty

Exhaust Emission Warranty (USA Only)

There are responsibilities, restrictions, and exclusions which apply to these warranties. Please read the Warranties Booklet given to you by your Honda dealer at the time of purchase. Be sure to keep your Honda owner’s card with your Warranties Booklet (USA only).

It is important to realize that your warranty applies to defects in material or workmanship of your Honda.

Your warranty coverage will not be voided if you choose to perform your own maintenance. However, you should have the proper tools and service information and be mechanically qualified. Failures that occur due directly to improper maintenance are not covered.

Almost all of your warranty coverage can be extended through the

Honda Protection Plan (USA only). For more information, see your

Honda dealer.


201

05/03/22 09:48:33 31HM8840_211

Warranty Service

Please remember that recommended maintenance interval servicing is not included in your warranty coverage. Additionally, your warranty does not apply to the normal wear of items (such as brakes, tires, etc.).

If you believe you have a problem with your ATV, call the service department of your Honda dealer. Make an appointment for an inspection and diagnosis. Remember, as the owner of the ATV, you will be asked to authorize that inspection. Your dealer will give you the results of the inspection. If the problem is covered under warranty, your dealer will perform the warranty repairs for you.

If you have questions about warranty coverage or the nature of the repair, it is best to talk to the service manager of your Honda dealer.

Sometimes, in spite of the best intentions of all concerned, a misunderstanding may occur. If you aren’t satisfied with your dealer’s handling of the situation, we suggest you discuss your problem with the appropriate member of the dealership’s management team. If the problem has already been reviewed with the Service Manager, Parts

Manager, Sales Manager, etc., contact the Owner of the dealership or their designated representative.

202


05/03/22 09:48:38 31HM8840_212

Contacting Honda

Your owner’s manual was written to cover most of the questions you might ask about your Honda. Any questions not answered in the owner’s manual can be answered by your Honda dealer. If your dealer doesn’t have the answer right away, they will get it for you.

If you have a difference of opinion with your dealer, please remember that each dealership is independently owned and operated. That’s why it’s important to work to resolve any differences at the dealership level.

If you wish to comment on your experiences with your Honda or with your dealer, please send your comments to the following address (USA only):

Motorcycle Division, American Honda Motor Co., Inc., P.O. Box 2220,

Torrance, CA 90509-2220, mailstop: 100-4W-5B, telephone: (866) 784-

1870.

Canada: Refer to the Warranties Booklet that was supplied with your vehicle.

Please include the following information in your letter: name, address, and telephone number product model, year, and frame number date of purchase dealer name and address

We will likely ask your Honda dealer to respond, or possibly acknowledge your comments directly.


203

05/03/22 09:48:43 31HM8840_213

Your Honda Dealer

Once you purchase your new Honda, get familiar with the organization of your Honda dealer so you can utilize the full range of services available.

The service department is there to perform regular maintenance and unexpected repairs. It has the latest available service information from

Honda. The service department will also handle warranty inspections and repairs.

The parts department offers Genuine Honda parts, Pro Honda products,

Hondaline accessories (USA only), and Honda accessories and products

(Canada only). The same quality that went into your Honda can be found in Genuine Honda replacement parts. You’ll also find comparable quality in the accessories and products available from the parts department.

The sales department offers the Honda Protection Plan to extend almost all of your warranty coverage (USA only).

Your Honda dealer can inform you about competition and other riding events in your area. You’ll also find that your dealer is a source of information about American Honda’s Rider Education Centers and the

Honda Rider’s Club of America (USA only).

We’re sure you’ll be as pleased with the service your Honda dealer continues to provide after the sale as you are with the quality and dependability of your Honda.

204


05/03/22 09:48:50 31HM8840_214

The Honda Rider’s Club (USA only)

One of the best ways to get the most enjoyment from owning and riding your Honda is through the Honda Rider’s Club of America. Your purchase of a new motorcycle, scooter, ATV or PWC from a participating U.S. Honda dealer entitles you to a complimentary oneyear membership in the Club. There are hundreds of HRCA Chapter sponsoring dealers across the USA with events and activities almost every weekend. Membership benefits include:

24 hour, toll-free roadside assistance for your new Honda (includes roadside assistance for your transport vehicle as long as your Honda is aboard or in tow).

Vehicle transport to the nearest Honda dealer or service center, if necessary.

An exclusive HRCA website complete with access to the official

Honda Common Service Manual, contests, insider information and more.

Reimbursement (up to $75) for Motorcycle Safety Foundation training. Separate free training from the Specialty Vehicle Institute of

America for ATV owners.

One full year of the

Honda Red Rider

magazine or

Honda Red Rider

ATV

(for ATV purchasers).

Discounts from HRCA partners for experienced rider courses.

Discounted vehicle insurance from the HRCA’s insurance partner.

Racing contingency programs and assistance at selected dual-sport, off-road, and motocross events.

Contact your Honda dealer for more information or call: 1-800-847-

HRCA or log on to www.hrca.honda.com.


205

05/03/22 09:48:53 31HM8840_215

Table of Contents

The following presents the contents of each section of your owner’s manual.

ATV SAFETY ......................................................................................

. 1

Important Safety Information ................................................................

. 2

Safety Labels ..........................................................................................

. 5

INDICATORS & CONTROLS ...........................................................

. 9

Operation Component Locations .........................................................

. 11

Indicators ..............................................................................................

. 14

Reverse and Neutral Indicators .........................................................

.14

Gear Position Indicator ......................................................................

.15

206


05/03/22 09:48:56 31HM8840_216


Controls & Features .............................................................................

. 16

Fuel Valve ........................................................................................

. 16

Choke Knob .....................................................................................

. 17

Ignition Switch .................................................................................

. 18

Start Button ......................................................................................

. 19

Engine Stop Switch ..........................................................................

. 19

Headlight Switch ..............................................................................

. 20

Headlight Dimmer Switch ................................................................

. 20

Recoil Starter ....................................................................................

. 21

Throttle Lever ..................................................................................

. 22

Gear Shift Switch .............................................................................

. 23

Reverse Selector Knob .....................................................................

. 24

Front Brake Lever ............................................................................

. 25

Rear Brake Lever .............................................................................

. 25

Rear Brake Pedal ..............................................................................

. 25

Parking Brake ...................................................................................

. 25

Flag Pole Bracket .............................................................................

. 26

BEFORE RIDING .............................................................................

. 29

Are You Ready to Ride ?

.....................................................................

. 30

Protective Apparel ............................................................................

. 30

Rider Training ..................................................................................

. 32

Age Recommendation ......................................................................

. 33

No Passengers ..................................................................................

. 33

No Alcohol or Drugs ........................................................................

. 34

Is Your ATV Ready to Ride ?

..............................................................

. 35

Pre-ride Inspection ...........................................................................

. 35

Load Limits & Guideline

Loading

.....................................................................

............................................................................................

. 38

. 38

Load Limits ......................................................................................

. 39

Loading Guidelines ..........................................................................

. 40

Accessories & Modifications ...............................................................

. 41

Accessories ........................................................................................

.41

Modifications ....................................................................................

.42


207

05/03/22 09:49:00 31HM8840_217


BASIC OPERATION & RIDING ....................................................

. 43

Safe Riding Precautions .......................................................................

. 45

Off-Road Use Only ..........................................................................

. 45

Keeps Hands and Feet on Controls ..................................................

. 46

Control Speed ...................................................................................

. 47

Use care on Unfamiliar or Rough Terrain ........................................

. 48

Do Not Perform Stunts .....................................................................

. 49

Starting & Stopping the Engine ...........................................................

. 50

Preparation .......................................................................................

. 50

Starting Procedure ............................................................................

. 51

Flooded Engine ................................................................................

. 54

How to Stop the Engine ...................................................................

. 54

Using the Recoil Starter ...................................................................

. 55

Shifting Gears ......................................................................................

. 56

Riding in Reverse .................................................................................

. 59

Braking .................................................................................................

. 61

Riding Your ATV ................................................................................

. 63

Making Turns ...................................................................................

. 63

Skidding or Sliding ..........................................................................

. 65

Riding Up Hills ................................................................................

. 66

Riding Down Hills ...........................................................................

. 70

Crossing or Turning on Hills or Slopes ............................................

. 71

Riding Over Obstacles .....................................................................

. 73

Riding Through Water .....................................................................

. 74

Parking .................................................................................................

. 75

208


05/03/22 09:49:07 31HM8840_218


SERVICING YOUR HONDA ...........................................................

. 77

Bef ore You Service Your Honda

The Importance of Maintenance ..........................................................

. 79

Maintenance Safety ..............................................................................

. 80

Important Safety Precautions ...........................................................

. 81

Maintenance Schedule .........................................................................

. 82

Maintenance Record .............................................................................

. 86

Service Preparations

Maintenance Component Locations .....................................................

. 87

Tool Kit ................................................................................................

. 90

Owner’s Manual Storage ......................................................................

. 91

Seat Removal .......................................................................................

. 92

Service Procedures

Fluids & Filters

Fuel ......................................................................................................

. 93

Engine oil .............................................................................................

. 96

Gear Case Oil .....................................................................................

. 102

Air Cleaner .........................................................................................

. 104

Engine

Throttle ...............................................................................................

. 109

Carburetor Choke Cable & Knob .......................................................

. 111

Clutch System ....................................................................................

. 112

Reverse Lock System .........................................................................

. 113

Engine Idle Speed ..............................................................................

. 114

Spark Plug ..........................................................................................

. 115

Valves .................................................................................................

. 118

Spark Arrester ....................................................................................

. 119

(cont’d)


209

05/03/22 09:49:12 31HM8840_219


Chassis

Brakes .................................................................................................

. 120

Tires ...................................................................................................

. 134

Engine Guard & Skid Plates ...............................................................

. 141

Electrical

Battery ................................................................................................

. 142

Appearance Care ................................................................................

. 147

TIPS ...................................................................................................

. 151

Preparing for a Ride ...........................................................................

. 152

What to Take to the Riding Area ...................................................

. 152

What to Take on the Trail ..............................................................

. 153

Transporting Your Honda ..................................................................

. 154

Storing Your Honda ...........................................................................

. 156

Preparation for Storage ..................................................................

. 157

Removal from Storage ...................................................................

. 159

You & the Environment .....................................................................

. 160

TAKING CARE OF THE UNEXPECTED ...................................

. 161

General Guidelines .............................................................................

. 162

If Your Engine Quits or Won’t Start ..................................................

. 164

If the Shift Switches Do Not Function ..............................................

Emergency Gear Selection & Operation ...........................................

. 167

. 168

If You Have a Flat Tire .....................................................................

. 170

If a Fuse Blows ..................................................................................

. 173

If You Crash .......................................................................................

. 176

If You Lose Your Key .......................................................................

. 177

If the Battery Is Low (or Dead) .........................................................

. 178

If a Component Fails ..........................................................................

. 179

210


05/03/22 09:49:15 31HM8840_220


TECHNICAL INFORMATION .....................................................

. 181

Vehicle Identification .........................................................................

. 182

Specifications .....................................................................................

. 184

Break-in Guidelines ...........................................................................

. 188

High Altitude Carburetor Adjustment ................................................

. 189

Emission Control Systems ..................................................................

. 190

Oxygenated Fuels ...............................................................................

. 194

CONSUMER INFORMATION ......................................................

. 197

Authorized Manuals ...........................................................................

. 198

Warranty Coverage ............................................................................

. 201

Warranty Service ................................................................................

. 202

Contacting Honda ..............................................................................

. 203

Your Honda Dealer ............................................................................

. 204

The Honda Rider’s Club (USA only) .................................................

. 205

TABLE OF CONTENTS .................................................................

. 206

INDEX ...............................................................................................

. 212

QUICK REFERENCE


211

05/03/22 09:49:18 31HM8840_221

Index

A

accessories ............................................................................................

. 41 age recommendation ............................................................................

. 33 air cleaner, filter ................................................................................................

. 104 housing drain tube ..........................................................................

. 108 air pressure, gauge ................................................................................................

. 90 tire ..................................................................................................

. 135 altitude, high .......................................................................................

. 189

American Honda, contacting ..............................................................

. 203 apparel, protective ................................................................................

. 30 appearance care ..................................................................................

. 147 authorized manuals .............................................................................

. 198

B

Battery ................................................................................................

. 142

Brakes, cables ..............................................................................................

. 130 draining water from ........................................................................

. 133 fluid ................................................................................................

. 120 front brake lever ...............................................................................

. 26 front brake lever freeplay ...............................................................

. 123 parking .............................................................................................

. 75

212

Index

05/03/22 09:49:22 31HM8840_222

Index

rear brake lever .................................................................................

. 25 rear brake lever freeplay ................................................................

. 129 rear brake pedal ..............................................................................

. 127 rear brake pedal freeplay ................................................................

. 127 shoe lining clearance ......................................................................

. 131 shoe wear ........................................................................................

. 131 braking ..................................................................................................

.61

break-in guidelines .............................................................................

. 188

C

capacity, fuel ........................................................................................

. 94 carburetor, altitude adjustment ...........................................................

. 189 care, appearance .................................................................................

. 147 cargo, loading and operational guidelines ...................................................

. 40 weight limit ......................................................................................

. 39 choke, cable ...............................................................................................

. 111 knob ................................................................................................

. 111 cleaning, appearance care ...................................................................

. 147 climbing hills ........................................................................................

. 66 clutch system ......................................................................................

. 112 color label ...........................................................................................

. 183 compartment, owner’s manual ................................................................................

. 91 tool kit ..............................................................................................

. 90

(cont’d)

Index

213

05/03/22 09:49:25 31HM8840_223

Index

component fails ..................................................................................

. 179 consumer information ........................................................................

. 197 crash, if you ........................................................................................

. 177 crossing or turning on hills or slops .....................................................

. 71 customer service .................................................................................

. 203

D

dimmer switch, headlight .....................................................................

. 20 dipstick .................................................................................................

. 99

214

Index

05/03/22 09:49:29 31HM8840_224

Index

E

emission control system .....................................................................

. 190 engine flooded .............................................................................................

. 54 guard ..............................................................................................

. 141 idle speed ........................................................................................

. 114 number ...........................................................................................

. 182 oil .....................................................................................................

. 96 pinging .............................................................................................

. 93 starting ..............................................................................................

. 52 stop switch ........................................................................................

. 19 stopping ............................................................................................

. 54 won’t start ......................................................................................

. 164 environment .......................................................................................

exhaust system

. 160 cleaning ............................................................................................

. 36 purging ...........................................................................................

. 119

F

flag pole bracket ...................................................................................

. 27 flat tire ................................................................................................

. 171 flooded engine ......................................................................................

. 54 frame number .....................................................................................

. 182

(cont’d)

Index

215

05/03/22 09:49:33 31HM8840_225

Index

fuel, fill cap .............................................................................................

. 94 high altitude fuel mixture adjustment .............................................

. 189 oxygenated .....................................................................................

. 193 recommendation ...............................................................................

. 93 refueling ...........................................................................................

. 94 reserve fuel supply ...........................................................................

. 16 tank capacity ....................................................................................

. 94 valve .................................................................................................

. 16 fuses ...................................................................................................

. 174

G

gap, spark plug ...................................................................................

. 116 gasohol ...............................................................................................

. 194 gasoline ................................................................................................

. 93 gear case oil ........................................................................................

. 102 gear shifting .........................................................................................

. 56

H

headlight dimmer switch ......................................................................

. 20 headlight switch ...................................................................................

. 20 high altitude carburetor adjustment ....................................................

. 189

216

Index

05/03/22 09:49:37 31HM8840_226

Index

hills, crossing or turning on slops .............................................................

. 71 riding down hills ..............................................................................

. 70 riding up hills ...................................................................................

. 66 stopping on hills ...............................................................................

. 68

Honda, contacting .......................................................................................

. 203

Rider’s Club ...................................................................................

. 205 dealer ..............................................................................................

. 203

Honda service manual ........................................................................

. 196

I

identification, vehicle .........................................................................

. 182 idle speed, engine ...............................................................................

. 114 ignition switch ......................................................................................

. 18 indicators gear position indicator ......................................................................

. 15 neutral indicator ...............................................................................

. 14 reverse indicator ...............................................................................

. 14 inspection, pre-ride ...............................................................................

. 35

K

key, lost ..................................................................................................

. 178 number ...........................................................................................

. 178 kit, tool .................................................................................................

. 90

Index

217

05/03/22 09:49:40 31HM8840_227

Index

L

labels, safety ...........................................................................................

. 5 limit, weight .........................................................................................

. 39 load limits .............................................................................................

. 39 loading guidelines ................................................................................

. 40 lubrication engine oil ..........................................................................................

. 96 gear case oil ....................................................................................

. 102

M

maintenance, component locations .........................................................................

. 87 importance ........................................................................................

. 79 precautions .......................................................................................

. 81 record ...............................................................................................

. 86 safety ................................................................................................

. 80 schedule ............................................................................................

. 82

218

Index

05/03/22 09:49:44 31HM8840_228

Index

manual, service ...................................................................................

. 198 maximum weight limit .........................................................................

. 39 modifications ........................................................................................

. 42

N

neutral indicator ...................................................................................

. 14 noise emission control systems ..........................................................

. 193 numbers, serial ...................................................................................

. 182

O

obstacles, riding over oil,

...........................................................................

. 73 engine ...............................................................................................

. 96 gear case .........................................................................................

. 102 operating controls .................................................................................

. 16 operation component locations .............................................................

. 11 owner’s manual storage ........................................................................

. 91 oxygenated fuels ................................................................................

. 194

Index

219

05/03/22 09:49:47 31HM8840_229

Index

P

parking .................................................................................................

. 75 passenger, no carrying ..........................................................................

. 33 pavement, no riding on ...........................................................................

. 2 pinging, engine .....................................................................................

. 93 plugs, spark ........................................................................................

. 115 pre-ride inspection ................................................................................

. 35 problems, unexpected .........................................................................

. 161 protective apparel .................................................................................

. 29

R

rear final gear case oil ........................................................................

. 102 recoil starter ..........................................................................................

. 21 removal, seat ........................................................................................

. 92 reverse, assist cable ......................................................................................

. 113 assist lever ......................................................................................

. 113 gear, shifting into .............................................................................

. 59 indicator ...........................................................................................

. 14 riding in ............................................................................................

. 59 selector knob ....................................................................................

. 23 rider training .........................................................................................

. 31

Rider’s Club, Honda ...........................................................................

. 205

220

Index

05/03/22 09:49:51 31HM8840_230

Index

riding, basic operations ................................................................................

. 43 clothing .............................................................................................

. 29 precautions .......................................................................................

. 81 preparing for ....................................................................................

. 35 over obstacles ...................................................................................

. 77 safety ..................................................................................................

. 2 safety precautions .............................................................................

. 45 through water ...................................................................................

. 74

S

safety, important precautions .......................................................................

. 81 labels ..................................................................................................

. 6 riding precautions .............................................................................

. 45 schedule, maintenance ..........................................................................

. 82 seat removal .........................................................................................

. 92 serial numbers ....................................................................................

. 182 service, customer .........................................................................................

. 203 manuals ..........................................................................................

. 198 warranty .........................................................................................

. 202

(cont’d)

Index

221

05/03/22 09:49:54 31HM8840_231

Index

shifting gears ........................................................................................

. 56 skid plates ...........................................................................................

. 141 skidding or sliding ................................................................................

. 65 spark arrester ......................................................................................

. 119 spark knock ..........................................................................................

. 93 spark plug ...........................................................................................

. 115 specifications ......................................................................................

. 184 stalling on a hill ....................................................................................

. 68 start button ............................................................................................

. 19 starting, engine ...............................................................................................

. 50 troubleshooting ...............................................................................

. 164 stop switch, engine ...............................................................................

. 19 stopping engine ....................................................................................

. 54 storage,

ATV ...............................................................................................

. 156 owner’s manual ................................................................................

. 91 switch, headlight ...........................................................................................

. 20 headlight dimmer .............................................................................

. 20 ignition .............................................................................................

. 18

222

Index

05/03/22 09:49:57 31HM8840_232

Index

T

throttle lever ..........................................................................................

. 22, 109 tires, air pressure .....................................................................................

. 134 flat ..................................................................................................

. 170 replacing .........................................................................................

. 140 repairing .........................................................................................

. 139 specifications ..................................................................................

. 140 thread conditions ............................................................................

. 138 tool kit ..................................................................................................

. 90 trailer towing, operational guidelines ......................................................................

. 40 weight limits .....................................................................................

. 39 training, rider ........................................................................................

. 32 transporting your ATV .......................................................................

. 154 trouble, unexpected ............................................................................

. 161 troubleshooting, starting .....................................................................

. 165 turning, on level ground .................................................................................

. 64 on hills or slopes ...............................................................................

. 71

V

valve, fuel .............................................................................................

. 16 valve clearance ...................................................................................

. 118

Index

223

05/03/22 09:50:00 31HM8840_233

Index

W

warning labels ........................................................................................

. 6 warranty, coverage .........................................................................................

. 201 extended .........................................................................................

. 201 service ............................................................................................

. 202 washing your ATV .............................................................................

. 148 water, riding through ...................................................................................

. 74 draining from brakes ......................................................................

. 134 weight limit ..........................................................................................

. 39 wheel removal ....................................................................................

. 172

224

Index

05/03/22 09:50:02 31HM8840_234

Memo

225

05/03/22 09:50:04 31HM8840_235

226

Memo

05/03/22 09:50:09 31HM8840_236

Quick Reference

The following is a brief, but important collection of information you need to know about your Honda. You’ll also find space to record important notes.

How To Avoid Costly Repairs

The engine of your Honda can be the most expensive component to repair. Proper maintenance, especially the use of the recommended fluids and filters, prevents premature wear and damage.

Frequent causes of costly repairs are:

Engine oil: insufficient quantity, improper oil.

Air cleaner: dirty, leaking because of improper installation (poor seal).

Record important information on the following page:

Quick Reference

05/03/22 09:50:11 31HM8840_237

Quick Reference

Engine No.

Frame No.

Ignition Key No.

Color Label

Owner’s Name

Address

City/State

Phone

Dealer’s Name

Address

City/State

Phone

Service Mgr.

Quick Reference

05/03/22 09:50:19 31HM8840_238

Scheduled

Maintenance

Pre-ride Inspection

Fuel/Capacity

Engine Oil

Maximum Weight

Capacity

Quick Reference

Initial: 100 miles (150 km)

Regular: every 600 miles (1,000 km)

Check the following items each time before you ride (page 35 ): engine oil, fuel, tires, nuts & bolts, underbody & exhaust system, air cleaner housing drain tube, leaks, loose parts, cargo, cables, light, throttle, brakes, switches, steering.

unleaded gasoline, pump octane number

86 or higher

2.40 US gal (9.1 ) reserve:

0.63 US gal (2.4 )

API Service Classification SG or higher except oils labeled as energy conserving on the circular API service label,

SAE 10W-40, JASO T 903 standard MA,

Pro Honda GN4 or HP4 (without molybdenum additives) 4-stroke oil or equivalent

386 lbs (175 kg) rider, all cargo and accessories

Quick Reference

05/03/22 09:50:27 31HM8840_239

Quick Reference

Tires

Tire Pressure (cold)

Spark Plugs

Fuse

Front:

Rear:

AT22 × 7-11 ★


AT22 × 10-9 ★


Front:

Rear:

2.9 psi (20 kPa , 0.20 kgf/cm )

2.9 psi (20 kPa , 0.20 kgf/cm ) maximum tire pressure:

3.3 psi (23 kPa , 0.23 kgf/cm )

(front & rear) minimum tire pressure:

2.5 psi (17 kPa , 0.17 kgf/cm )

(front & rear) standard:

DPR8EA-9 (NGK) or

X24EPR-U9 (DENSO) cold climate:

DPR7EA-9 (NGK) or

X22EPR-U9 (DENSO) high speed riding:

DPR9EA-9 (NGK) shift motor fuse: or

X27EPR-U9 (DENSO) main: 15 A

30 A

Quick Reference

Owner's manual | Honda Fourtrax Recon ES TRX250TE ATV Owner’s manual 239 Pages

Owner's manual | Honda Fourtrax Recon ES TRX250TE ATV Owner’s manual

1

2

3

4

5

6

7

8

9

10

11

12

13

Reverse and Neutral Indicators

14

Gear Position Indicator

15

Fuel Valve

16

Choke Knob

17

Ignition Switch

18

Start Button

Engine Stop Switch

19

Headlight Switch

Headlight Dimmer Switch

20

Recoil Starter

21

Throttle Lever

22

Gearshift Switch

23

Reverse Selector Knob

24

Front Brake Lever

Rear Brake Lever/Parking Brake Lever

Rear Brake Pedal

25

Parking Brake

26

Flag Pole Bracket

27

28

29

Protective Apparel

30

31

Rider Training

32

Age Recommendation

No Passengers

33

No Alcohol or Drugs

34

Pre-ride Inspection

35

36

37

Loading

38

Load Limits

39

Loading Guidelines

40

Accessories

41

Modifications

42

43

44

Off-Road Use Only

45

Keep Hands and Feet on Controls

46

Control Speed