TIBCO iProcess Workspace (Windows) Installation

TIBCO iProcess Workspace (Windows) Installation
TIBCO iProcess® Workspace
(Windows)
Installation
Software Release 11.3.1
July 2012
Important Information
SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED
OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED
ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED
SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR
ANY OTHER PURPOSE.
USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A
LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE
AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER
LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE
SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE
LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED
IN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS
AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN
AGREEMENT TO BE BOUND BY THE SAME.
This document contains confidential information that is subject to U.S. and international copyright laws and
treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO
Software Inc.
TIBCO, The Power of Now, TIBCO ActiveMatrix BusinessWorks, TIBCO iProcess, TIBCO iProcess Suite and
TIBCO Enterprise Message Service are either registered trademarks or trademarks of TIBCO Software Inc. in the
United States and/or other countries.
EJB, Java EE, J2EE, and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
All other product and company names and marks mentioned in this document are the property of their
respective owners and are mentioned for identification purposes only.
THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL
OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME
TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC
OPERATING SYSTEM PLATFORM.
THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE
INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE
IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN
THIS DOCUMENT AT ANY TIME.
THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR
INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING
BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.
Copyright © 1994-2012 TIBCO Software Inc. ALL RIGHTS RESERVED.
TIBCO Software Inc. Confidential Information
| iii
Contents
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
TIBCO iProcess Workspace (Windows) Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Other TIBCO Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Third-party Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Connecting with TIBCO Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Join TIBCOmmunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Access TIBCO Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Contact TIBCO Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xiv
xiv
xiv
xiv
Chapter 1 Installation Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Supported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Basic System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
POSIX Threads (pthreads) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Chapter 2 Installing TIBCO iProcess Workspace (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation in GUI Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation in Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Creating a Response File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Performing a Silent Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Chapter 3 Uninstalling TIBCO iProcess Workspace (Windows) . . . . . . . . . . . . . . . . . . . . . . . . .17
Pre-removal Consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Uninstalling iProcess Workspace (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TIBCO iProcess Workspace (Windows) Installation
iv
| Contents
Appendix A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
The Installer Encounters an Error Trying to Locate pthread.dll. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
TIBCO iProcess Workspace (Windows) Installation
Figures v
|
Figures
Figure 1
Choose Destination Location Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Figure 2
Setup Type Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Figure 3
Select Components Dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Figure 4
Select TIBCO iProcess Engine Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
TIBCO iProcess Workspace (Windows) Installation
vi
| Figures
TIBCO iProcess Workspace (Windows) Installation
Tables vii
|
Tables
Table 1
General Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Table 2
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table 3
Installed Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 4
Response Result Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
TIBCO iProcess Workspace (Windows) Installation
viii
| Tables
TIBCO iProcess Workspace (Windows) Installation
| ix
Preface
This software may be available on multiple operating systems. However, not
all operating system platforms for a specific software version are released at the
same time. Please see the readme file for the availability of this software
version on a specific operating system platform.
This manual describes how to install TIBCO iProcess Workspace (Windows).
Topics
•
Related Documentation, page x
•
Typographical Conventions, page xii
•
Connecting with TIBCO Resources, page xiv
TIBCO iProcess Workspace (Windows) Installation
x
| Related Documentation
Related Documentation
This section lists documentation resources you may find useful.
TIBCO iProcess Workspace (Windows) Documentation
The following documents form the TIBCO iProcess Workspace (Windows) and
TIBCO iProcess Modeler documentation set, which are supplied with the TIBCO
iProcess Workspace (Windows) software:
•
TIBCO iProcess Workspace (Windows) Installation Guide Read this manual for
instructions on site preparation and installation.
•
TIBCO iProcess Workspace (Windows) Release Notes Read the release notes for a
list of new and changed features. This document also contains lists of known
issues and closed issues for this release.
•
TIBCO iProcess Suite Documentation Library This library contains all the
manuals for TIBCO iProcess Workspace (Windows), TIBCO iProcess Modeler,
and other TIBCO products in TIBCO iProcess Suite. The manuals for TIBCO
iProcess Workspace (Windows) and TIBCO iProcess Modeler are the
followings:
— TIBCO iProcess Workspace (Windows) User’s Guide
— TIBCO iProcess Modeler Getting Started
— TIBCO iProcess Modeler Procedure Management
— TIBCO iProcess Modeler Basic Design
— TIBCO iProcess Modeler Advanced Design
— TIBCO iProcess Modeler Integration Techniques
— TIBCO iProcess Expressions and Functions Reference Guide
— TIBCO iProcess Workspace (Windows) Manager’s Guide
Other TIBCO Product Documentation
You may find it useful to read the documentation for the following TIBCO
products:
•
TIBCO ActiveMatrix BusinessWorks™
•
TIBCO Business Studio™
•
TIBCO Enterprise Message Service™
TIBCO iProcess Workspace (Windows) Installation
Preface xi
|
•
TIBCO Hawk®
•
TIBCO Rendezvous®
Third-party Documentation
You may find it useful to read the documentation for the following third-party
products:
•
Microsoft® Windows®
TIBCO iProcess Workspace (Windows) Installation
xii
| Typographical Conventions
Typographical Conventions
The following typographical conventions are used in this manual.
Table 1 General Typographical Conventions
Convention
Use
code font
Code font identifies commands, code examples, filenames, pathnames, and
output displayed in a command window. For example:
Use MyCommand to start the foo process.
bold code
font
Bold code font is used in the following ways:
•
In procedures, to indicate what a user types. For example: Type admin.
•
In large code samples, to indicate the parts of the sample that are of
particular interest.
•
In command syntax, to indicate the default parameter for a command. For
example, if no parameter is specified, MyCommand is enabled:
MyCommand [enable | disable]
italic font
Key
combinations
Italic font is used in the following ways:
•
To indicate a document title. For example: See TIBCO ActiveMatrix
BusinessWorks Concepts.
•
To introduce new terms For example: A portal page may contain several
portlets. Portlets are mini-applications that run in a portal.
•
To indicate a variable in a command or code syntax that you must replace.
For example: MyCommand PathName
Key name separated by a plus sign indicate keys pressed simultaneously. For
example: Ctrl+C.
Key names separated by a comma and space indicate keys pressed one after the
other. For example: Esc, Ctrl+Q.
The note icon indicates information that is of special interest or importance, for
example, an additional action required only in certain circumstances.
The tip icon indicates an idea that could be useful, for example, a way to apply
the information provided in the current section to achieve a specific result.
TIBCO iProcess Workspace (Windows) Installation
Preface xiii
|
Table 1 General Typographical Conventions (Cont’d)
Convention
Use
The warning icon indicates the potential for a damaging situation, for example,
data loss or corruption if certain steps are taken or not taken.
TIBCO iProcess Workspace (Windows) Installation
xiv
| Connecting with TIBCO Resources
Connecting with TIBCO Resources
How to Join TIBCOmmunity
TIBCOmmunity is an online destination for TIBCO customers, partners, and
resident experts. It is a place to share and access the collective experience of the
TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety
of resources. To register, go to http://www.tibcommunity.com.
How to Access TIBCO Documentation
You can access TIBCO documentation here:
http://docs.tibco.com
How to Contact TIBCO Support
For comments or problems with this manual or the software it addresses, contact
TIBCO Support as follows:
•
For an overview of TIBCO Support, and information about getting started
with TIBCO Support, visit this site:
http://www.tibco.com/services/support
•
If you already have a valid maintenance or support contract, visit this site:
https://support.tibco.com
Entry to this site requires a user name and password. If you do not have a user
name, you can request one.
TIBCO iProcess Workspace (Windows) Installation
|1
Chapter 1
Installation Introduction
This chapter explains installation modes, requirements, and other options you
need to be aware of before the installation.
Topics
•
Installation Overview, page 2
•
Installation Requirements, page 4
TIBCO iProcess Workspace (Windows) Installation
2
| Chapter 1
Installation Introduction
Installation Overview
This section provides an overview of the TIBCO iProcess Workspace (Windows)
installer.
•
Installation Modes, page 2
•
Installation Types, page 2
Installation Modes
The installer can run in the following modes on Microsoft Windows platforms.
•
GUI Mode
•
Silent Mode
GUI Mode
In GUI mode, the installer presents panels that allow you to make choices about
product selection, product location, and so on.
To invoke the installer in GUI mode, double-click the executable.
For detailed information, see Installation in GUI Mode on page 7.
Silent Mode
In Silent mode, the installer uses a response file that was saved during an earlier
installation. Silent mode installs without prompting you for information.
For detailed information, see Installation in Silent Mode on page 14.
Installation Types
The following four installation types are available for TIBCO iProcess Workspace
(Windows) installation.
•
Administrator The Administrator installation type installs TIBCO iProcess
Workspace (Windows) and TIBCO iProcess Administrator.
•
Custom The Custom installation type is recommended for advanced users.
Choosing this installation type allows you to specify which components to
install, such as TIBCO iProcess Workspace (Windows), TIBCO iProcess
Modeler, iProcess Workspace Plug-ins, TIBCO iProcess Administrator, and so
on. This option also enables you to uninstall existing installed components.
TIBCO iProcess Workspace (Windows) Installation
Installation Overview 3
|
•
Modeler The Modeler installation type installs TIBCO iProcess Workspace
(Windows), TIBCO iProcess Administrator, and TIBCO iProcess Modeler.
•
User The User installation type installs TIBCO iProcess Workspace
(Windows) only.
TIBCO iProcess Workspace (Windows) Installation
4
| Chapter 1
Installation Introduction
Installation Requirements
This section describes the installation requirements for this product.
•
Supported Platforms, page 4
•
Basic System Requirements, page 4
•
POSIX Threads (pthreads), page 5
Supported Platforms
The following Microsoft Windows (x86) platforms are supported:
•
Microsoft Windows Server 2008 (64-bit)
•
Microsoft Windows Server 2008 R2 (64-bit)
•
Microsoft Windows Server 2003 (64-bit)
•
Microsoft Windows XP Professional SP3
•
Microsoft Windows 7 Professional SP1 (32-bit and 64-bit)
Microsoft has discontinued standard support for Windows XP. Extended support
is still available, but must be purchased from Microsoft.
TIBCO will continue to support iProcess Workspace (Windows) on Windows XP.
However, if a problem with iProcess Workspace (Windows) is reported to TIBCO
Support, and the problem is traced to Windows XP, TIBCO Support will not be
able to assist further with the resolution of that problem.
TIBCO therefore recommends that you install iProcess Workspace (Windows) on
Windows Server 2008 or Windows 7 instead of Windows XP.
Basic System Requirements
Before installing TIBCO iProcess Workspace (Windows), make sure your system
meets the system requirements listed in Table 2. See Microsoft Windows
documentation for more information about system requirements.
Table 2 System Requirements
Component
Requirement
Printer memory
64 MB of printer memory is required to print procedures.
Disk space
56 MB of free space on the hard disk is required.
TIBCO iProcess Workspace (Windows) Installation
Installation Requirements 5
|
Table 2 System Requirements
Component
Requirement
File system
NTFS
FAT partitions are not supported by iProcess Workspace (Windows).
POSIX Threads (pthreads)
On a Windows system, version 2.7.0 of the POSIX Threads (pthreads) library must
be available on the system PATH of the computer where you intend to install
TIBCO iProcess Workspace (Windows), before installation begins.
TIBCO has validated Version 2.7.0 with iProcess Workspace (Windows). If you
want to use a later version of the library, contact TIBCO Support to confirm
whether or not that version is supported by your iProcess Engine version.
If you do not already have a POSIX Threads (pthreads) library, you can obtain the
POSIX Threads (pthreads) for Windows distribution set from TIBCO Software
Inc. by downloading it as follows:
1. Go to the TIBCO Software Product Download Site
(http://download.tibco.com/tibco/Index.jsp) website. Entry to this site
requires a username and password. If you do not have a username, you can
request one.
2. Select Products Home > TIBCO iProcess Workspace (Windows)-Version
11.3.1 > TIBCO iProcess Workspace (Windows) Software Version 11.3.1.
From the list of files displayed, select the pthreads item.
— For Windows (32-bit), copy the pthread.dll file from the POSIX Threads
(pthreads) for Win32 distribution set to the %systemroot%\system32
folder on the computer where you intend to install iProcess Workspace
(Windows) and make sure that the computer’s PATH system environment
variable includes the %systemroot%\system32 folder.
— For Windows (64-bit), copy the pthread.dll file from the POSIX Threads
(pthreads) for Win32 distribution set to the C:\WINDOWS\SysWOW64 folder
on the computer where you intend to install iProcess Workspace
(Windows) and make sure that the computer’s PATH system environment
variable includes the C:\WINDOWS\SysWOW64 folder.
If a supported version of the pthread.dll library is not available on the system
PATH when you run the installer, the installer immediately exits with an error
message. See The Installer Encounters an Error Trying to Locate pthread.dll on
page 21 for details.
TIBCO iProcess Workspace (Windows) Installation
6
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
Chapter 2
Installing TIBCO iProcess Workspace
(Windows)
This chapter explains how to install or upgrade TIBCO iProcess Workspace
(Windows).
You must log on to Microsoft Windows as a user who is a member of the
Administrators group. Otherwise, you are not able to run the installer.
Topics
•
Installation in GUI Mode, page 7
•
Installation in Silent Mode, page 14
TIBCO iProcess Workspace (Windows) Installation
Installation in GUI Mode 7
|
Installation in GUI Mode
To install TIBCO iProcess Workspace (Windows) in GUI mode, complete the
following steps:
1. Log on to Microsoft Windows as a user who is a member of the Administrators
group.
2. Open the physical media or download the TIBCO iProcess Workspace
(Windows) installation package from a network server.
3. Extract the product’s file to a temporary directory and navigate to the
temporary directory.
Check if you have already copy the Pthread.dll file to the appropriate
directory. For detailed information, see POSIX Threads (pthreads) on page 5.
4. Run Setup.exe. The Choose Setup Language dialog is displayed.
5. Select the language you want displayed in the text of the installation from the
drop-down list and click the OK button. The Welcome dialog appears.
6. Review the information in the Welcome dialog and click the Next button. The
Software License Agreement dialog appear.
7. Review the entire TIBCO Software Inc. End User License Agreement.
— Click the No button if you do not agree to the terms of the license
agreement, and then exit from the installation process.
— Click the Yes button if you agree to the terms of the license agreement. The
Choose Destination Location dialog appears, as shown in Figure 1.
TIBCO iProcess Workspace (Windows) Installation
8
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
Figure 1 Choose Destination Location Dialog
8. Click the Browse... button to specify a Destination Folder where you want to
install iProcess Workspace (Windows).
— If this is a new installation, go to step 9.
— If you have installed an iProcess Workspace (Windows) in your chosen
destination folder, a dialog appears and displays a message asking if you
want to upgrade your previous installed iProcess Workspace (Windows).
Click the Yes button to upgrade your installation. The Select TIBCO
iProcess Configuration dialog appears. You can either select an existing
configuration set from the TIBCO iProcess Configurations list to update, or
enter a new configuration name.
9. Click the Next button, the Setup Type dialog appears, as shown in Figure 2.
TIBCO iProcess Workspace (Windows) Installation
Installation in GUI Mode 9
|
Figure 2 Setup Type Dialog
10. Select one of the following installation types in the Setup Type dialog:
— Administrator Select this setup type to install TIBCO iProcess Workspace
(Windows) and TIBCO iProcess Administrator.
— Modeler Select this setup type to install TIBCO iProcess Workspace
(Windows), TIBCO iProcess Administrator, and TIBCO iProcess Modeler.
— User Select this setup type to install TIBCO iProcess Workspace (Windows)
only.
— Custom Select this setup type if you want to specify which components to
install, such as TIBCO iProcess Workspace (Windows), TIBCO iProcess
Modeler, iProcess Workspace Plug-ins, TIBCO iProcess Administrator, and
so on. This option also enables you to uninstall the existing installed
components.
Click the Next button, the Select Components dialog appears, as shown in
Figure 3. Check the checkbox in front of the component that you want to
install. See Table 3 for detailed information.
TIBCO iProcess Workspace (Windows) Installation
10
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
Figure 3 Select Components Dialog
Table 3 Installed Components
Component
Description
TIBCO iProcess
Workspace (Windows)
Check the TIBCO iProcess Workspace (Windows) checkbox to install TIBCO
iProcess Workspace (Windows) and Utility Server.
Note: This option is grayed out. You cannot uncheck this checkbox.
TIBCO iProcess
Administrator
Check the TIBCO iProcess Administrator checkbox to install TIBCO iProcess
Administrator.
Case Close & Purge
Facilities
Check the Case Close and Purge facilities checkbox to install the Case
Administration features.
TIBCO iProcess Plug-in
SDK
Check the TIBCO iProcess Plug-in SDK checkbox to install the SDK for
developing your own EAI plug-ins.
TIBCO iProcess Open
Forms SDK
Check the TIBCO iProcess Open Forms SDK checkbox to install the SDK that
allows you to create your own Forms application for use with the iProcess.
TIBCO iProcess Modeler
Check the TIBCO iProcess Modeler checkbox to install the iProcess Modeler.
Note: This option is greyed out if you have selected the EAI Plug-ins option,
because the EAI Plug-ins option is dependent on the TIBCO iProcess Modeler
option.
TIBCO iProcess Workspace (Windows) Installation
Installation in GUI Mode 11
|
Table 3 Installed Components
Component
Description
EAI Plug-ins
Check the EAI Plug-ins checkbox to install all the available iProcess Workspace
Plug-ins.
Click the Change button in the Description area, the Select Sub-components
dialog appears. You can check the checkboxes in front of the following
sub-components if you want to install it.
—EAI COM - TIBCO iProcess COM Client Plug-in
—EAI MAIL - TIBCO iProcess Email Client Plug-in
—EAI SCRIPT - TIBCO iProcess Script Client Plug-in
—EAI DB - TIBCO iProcess Database Client Plug-in
11. Click the Next button, the Select TIBCO iProcess Engine dialog appears, as
shown in Figure 4.
Figure 4 Select TIBCO iProcess Engine Dialog
Enter the details of the iProcess Engine that you want to connect to by default
when you start the iProcess Workspace (Windows):
— Enter the Machine Name of the computer where the iProcess Engine has
been installed.
If you do not fill in any Machine Name here, the installer uses the value of
the COMPUTERNAME environment variable by default, that is, uses the
TIBCO iProcess Workspace (Windows) Installation
12
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
name of the computer on which you are installing iProcess Workspace
(Windows).
— Enter the RPC Program Number of the iProcess Engine that you want to
connect to.
Most iProcess Engines use RPC numbers in the range from 391875 to
391879 inclusive, and using numbers in this range needs to prevent clashes
with other applications. If you enter a number outside this range, a
warning message appears. You can choose to use the number you have
entered, or to enter another.
Alternatively, you can change the RPC program number using the iProcess
Preference Editor swpref.exe after installation, if you know that your
iProcess Engine uses a different RPC program number. For detailed
information, see “Using the iProcess Preference Editor” in TIBCO iProcess
Workspace (Windows) Manager’s Guide.
12. Click the Next button, the Select Program Folder dialog appears. You can
specify a folder name for TIBCO iProcess Workspace (Windows) in the
Program Folders field or select an existing folder from the Existing Folders
list. After installation, you can see this specified folder when selecting All
Programs from the Start menu.
If you want to keep an earlier version of TIBCO iProcess Workspace
(Windows) on the same computer, TIBCO suggests that you use a different
folder to avoid conflicts.
13. Click the next button, the Start Copying Files dialog appears. Review your
installation options in this dialog.
— If you want to change any of your choices, click Back to move back to the
appropriate dialog.
— If you are satisfied with your choices, click the Next button. The installer
then installs TIBCO iProcess Workspace (Windows) on your computer.
TIBCO iProcess Workspace (Windows) Installation
Installation in GUI Mode 13
|
14. Complete the installation. After completing the installation, the Install
Complete dialog appears.
If the installer has installed any system files, you need to restart your
computer before using the iProcess Workspace (Windows). A dialog appears
to inform you of this and gives you the option to restart either now or later.
15. Click the Finish button to exit the installation program.
No program folders or shortcuts are created for TIBCO iProcess Modeler. You can
only start TIBCO iProcess Modeler from TIBCO iProcess Workspace (Windows).
See TIBCO iProcess Workspace (Windows) User’s Guide for more information.
TIBCO iProcess Workspace (Windows) Installation
14
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
Installation in Silent Mode
If you want to install TIBCO iProcess Workspace (Windows) in silent mode, you
must have installed it in GUI mode on a computer and generated a response file
that provides all the configuration information. You can subsequently use this
response file as a script to run a similar installation automatically, without having
to manually enter values in the dialogs. Installation in silent mode makes it easier
to roll out TIBCO iProcess Workspace (Windows) across a network, using either
simple batch files or network management software.
Make sure that the machine you use to create the response file is in the same state
as the machines where you want to perform the installations in silent mode.
Otherwise, you may have a problem with extra dialogs.
For example, if you create the response file on a machine that has a previous
installation of iProcess Workspace (Windows) then an extra dialog is displayed
asking if you want to upgrade this installation. If you then try and perform a
silent installation with this response file on a machine that does not have a
previous installation of iProcess Workspace (Windows) then the responses in the
response file will not match the dialogs displayed in the installation program.
The following procedure explains how to install TIBCO iProcess Workspace
(Windows) in silent mode.
•
Creating a Response File, page 14
•
Performing a Silent Installation, page 15
Creating a Response File
To generate a response file, complete the following steps:
1. Open a command prompt and type the following command:
setupDir\setup.exe -r -f1responseFileDir:\setup.iss
where:
— setupDir is the directory where you run the installer in GUI mode.
— responseFileDir is the directory where you want to store your generated
response file.
For example:
E:\TIBCO\setup.exe -r -f1C:\setup.iss
TIBCO iProcess Workspace (Windows) Installation
Installation in Silent Mode 15
|
2. Run setup.exe, entering the required values to all the prompts as normal. See
Installation in GUI Mode on page 7. The installer records your responses in a
Setup.iss file that creates in the responseFileDir directory.
3. Start TIBCO iProcess Workspace (Windows) to make sure that it has been
correctly installed.
Performing a Silent Installation
To perform an installation in silent mode, complete the following steps:
1. Prepare a response file Setup.iss. For detailed information, see Creating a
Response File on page 14.
2. Log on to Windows as a user who is a member of the Administrators group.
3. Open a command prompt and type the following command:
setupDir\setup.exe -s -f1"responseFileDir:\setup.iss"
-f2"logfileDir:\setup.log" /SMS
where:
— setupDir is the directory from which you run the installer in GUI mode.
— responseFileDir is the full path of the response file.
— logfileDir is the full path of a log file you want to create. Through reviewing
the log file, you can know the result of the silent installation. For detailed
information of the log file, see Viewing the Log File. If you do not use the
-f2 parameter, the Setup.log file will be created in the directory where
Windows is installed by default.
—
SMS is used to make sure that the silent installation is complete before the
installer and any network connections close.
Strings must be included in quotes, for example “c:\setup.iss”.
4. Press the Enter key on the keyboard. The installer installs iProcess Engine,
automatically getting the necessary information from the response file.
5. Start iProcess Engine to make sure that it has been correctly installed.
Viewing the Log File
The log file contains three sections:
•
[InstallShield Silent] identifies the version of InstallShield Silent used in the
silent installation. It also identifies the file as a log file.
TIBCO iProcess Workspace (Windows) Installation
16
| Chapter 2
Installing TIBCO iProcess Workspace (Windows)
•
[Application] identifies which application and version have been installed.
This section is only created if the [ResponseResult] section contains the result
code 0, indicating that the installation was successful.
•
[ResponseResult] contains one of the following result codes shown in Table 4,
indicating whether or not the silent installation succeeded.
Table 4 Response Result Codes
Value
Description
0
Success.
-1
General error.
-2
Invalid mode.
-3
Required data not found in the response file.
-4
Not enough memory available.
-5
File does not exist.
-6
Cannot write to the response file.
-7
Unable to write to the log file.
-8
Invalid path to the response file.
-9
Not a valid list type (string or number).
-10
Data type is invalid.
-11
Unknown error during setup.
-12
Dialogs are out of order.
-51
Cannot create the specified folder.
-52
Cannot access the specified file or folder.
-53
Invalid option selected.
TIBCO iProcess Workspace (Windows) Installation
Uninstalling TIBCO iProcess Workspace (Windows) 17
|
Chapter 3
Uninstalling TIBCO iProcess Workspace
(Windows)
This chapter describes how to uninstall TIBCO iProcess Workspace (Windows).
Topics
•
Pre-removal Consideration, page 18
•
Uninstalling iProcess Workspace (Windows), page 19
TIBCO iProcess Workspace (Windows) Installation
18
| Chapter 3
Uninstalling TIBCO iProcess Workspace (Windows)
Pre-removal Consideration
Before uninstalling your iProcess Workspace (Windows), TIBCO reminds you:
•
The uninstalltion procedure is going to uninstall any of the components that
have been installed by the iProcess Workspace (Windows) installation, such as
TIBCO iProcess Modeler or TIBCO iProcess Workspace Plug-ins.
•
The components not installed by the iProcess Workspace (Windows)
installation, for example, TIBCO iProcess Java Plug-in or plug-ins that you
have created) must be uninstall before performing the iProcess Workspace
(Windows) uninstallation. For detailed information a bout how to uninstall
these components, see the installation guides for them.
TIBCO iProcess Workspace (Windows) Installation
Uninstalling iProcess Workspace (Windows) 19
|
Uninstalling iProcess Workspace (Windows)
To uninstall TIBCO iProcess Workspace (Windows) from your computer,
complete the following steps:
1. Open the Control Panel window on your computer.
2. Double-click the Add or Remove Programs button and select the TIBCO
iProcess Workspace (Windows) version item from the list, where version is the
version number of your iProcess Workspace (Windows) installation. Then
click the Change/Remove button to perform the uninstallation process.
On Windows 7, double-click the Programs and Features button and
double-click TIBCO iProcess Workspace (Windows) version from the list,
where version is the version number of your iProcess Workspace (Windows)
installation to perform the uninstallation process.
TIBCO iProcess Workspace (Windows) Installation
20
| Appendix A
Troubleshooting
Appendix A
Troubleshooting
This appendix describes how to deal with errors that you may encounter when
installing TIBCO iProcess Workspace (Windows).
If the information in this appendix does not help you to resolve the problem, or if
you are in any way unsure as to how to proceed, contact TIBCO Support for
further assistance.
Topics
•
The Installer Encounters an Error Trying to Locate pthread.dll, page 21
TIBCO iProcess Workspace (Windows) Installation
The Installer Encounters an Error Trying to Locate pthread.dll 21
|
The Installer Encounters an Error Trying to Locate pthread.dll
Problem
Description
When you run the installer, the installer exits immediately with one of the
following error messages:
•
Failed to locate the 'pthread.dll' component
•
The minimum 'pthread.dll' component version required is 2.7.0.
The version available on the system is 2.6.0
•
Failed to load the 'pthread.dll' component as no version
information could be found in it
•
Failed to determine the version of the 'pthread.dll'
component.
accompanied by the following message:
POSIX Threads (pthreads) for Win32 is required in order for the
software to run correctly. Please refer to the Installation
Guide for information on where to get hold of this component and
how to install it.
What to Do
To resolve this problem:
1. Obtain the POSIX Threads (pthreads) library for Windows distribution set
library from TIBCO Software Inc. and make it available on your system PATH.
For detailed information, see POSIX Threads (pthreads) on page 5.
2. Run the installer again.
TIBCO iProcess Workspace (Windows) Installation
22
| Appendix A
Troubleshooting
TIBCO iProcess Workspace (Windows) Installation
| 23
Index
B
R
basic system requirements 4
response file 14
C
S
creating a response file 14
customer support xiv
support, contacting xiv
supported platforms 4
system requirement 4
I
T
installation in GUI Mode 7
installation in Silent Mode 14
installation mode
GUI Mode 2
Silent Mode 2
installation modes 2
installation overview 2
installation types
administrator 2
custom 2
modeler 3
user 3
technical support xiv
third-party documentation xi
U
uninstalling iProcess Workspace (Windows) 19
P
performing a silent installation 15
POSIX Threads (pthreads) 5
pre-removal consideration 18
TIBCO iProcess Workspace (Windows) Installation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement