SmartRack 10U Low-Profile Switch-Depth Wall

SmartRack 10U Low-Profile Switch-Depth Wall
SmartRack 10U Low-Profile Switch-Depth
Wall-Mount Rack Enclosure Cabinet with Clear
Acrylic Window, Hinged Back
Highlights
Maximum load capacity of 200 lb.
Swings away from wall on hinge
for easy back-door access
Front door includes
MODEL NUMBER: SRW10USG
shatter-resistant clear acrylic
window
Locking steel cabinet vented at
sides, top and bottom
Secures 10U of 19 in. rack
equipment up to 20.5 in. deep
Package Includes
SRW10USG SmartRack 10U
Low-Profile Switch-Depth
Wall-Mount Rack Enclosure
Cabinet
(24) M6 screws
(24) M6 cage nuts
(24) M6 washers
Description
(24) 12-24 screws
The SRW10USG SmartRack 10U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to
house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices
(2) Keys
Owner’s manual
and other areas with limited floor space where you need equipment to be secure, organized and out of the way.
Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds.
The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the
window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.
The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The
doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to
flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports
allow easy cable routing.
The SRW10USG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack.
Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch
increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.
Features
Saves Valuable Workspace
Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be
secure, organized and out of the way
Houses EIA-standard 19 in. rack equipment in 10U of space
Maximum load capacity of 200 lb.
1/3
Hinged Cabinet for Convenient Access
Swings away from the wall to allow easy back-door access to equipment and cabling during installation and maintenance
Rotate cabinet 180° before mounting to open reversible doors left or right
Shatter-Resistant Clear Acrylic Front Window
Lets you monitor equipment without unlocking the enclosure
Prevents equipment tampering
Reduces acoustic noise
Provides extra visual flair
Keeps Important Equipment Secure
Side panels and doors lock securely to help prevent damage, tampering or theft
Vented panels allow generous airflow that keeps equipment cool
Convenient ports with removable covers allow cable routing through top and bottom
Easy Enclosure and Equipment Installation
Ships fully assembled for quick installation
Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit
Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels
Rails support square-hole or 12-24 threaded-hole mounting
Rack spaces numbered for easy reference
Meets Payment Card Industry Standards
Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance
Specifications
PHYSICAL
Rack Height (U Spaces)
10
Maximum Device Depth (in.)
20.5
Maximum Device Depth (cm)
52.07
Minimum Device Depth (in.)
3
Minimum Device Depth (cm)
7.62
Shipping Dimensions (hwd / in.)
24.25 x 26.38 x 24.13
Shipping Dimensions (hwd / cm)
61.6 x 67.01 x 61.29
Shipping Weight (lbs.)
59.22
Shipping Weight (kg)
26.64
Unit Dimensions (hwd / in.)
21.56 x 23.63 x 21.63
Unit Dimensions (hwd / cm)
54.77 x 60.02 x 59.94
2/3
Unit Weight (lbs.)
53.4
Unit Weight (kg)
24.22
Color
Black
Weight Capacity - Stationary (lbs.)
200
Weight Capacity - Stationary (kg)
91
Factory Preset Rack Depth (in.)
10.42
Factory Preset Rack Depth (cm)
26.5
Factory Preset Rack Depth (mm)
265
Maximum Device Depth (mm)
521
Minimum Device Depth (mm)
76
SPECIAL FEATURES
Grounding Lug
Front and Back door frames
CERTIFICATIONS
Approvals
UL/CSA 60950-1, EIA-310-D, IEC 60297-3-100, IP20 Protection, RoHS
WARRANTY
Product Warranty Period (Worldwide)
5-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising