null null

INFRASTRUCE & INTEGRATED DEVELOPVEMENT OF TOURIST FACILITITY AT PORBANDAR DIST. PORBANDA
DESCRIPTION
SR. NO.
Excavation for foundation upto 1.5 m depth including sorting
1
QTY.
2250
UNIT
Cum.
1025
Cum
40
Cum
1229
Cum.
323
Cum.
197
Cum.
670
Cum
2410
Sqm.
229600
Kgs.
229600
kgs
out and stacking of useful materials and disposing of the
excavated stuff upto 50meter lead . ' (a) Hard & dense soil
2
3
4
5
6
7
8
9
10
(B) Excavation for foundation for depth from1.5 m to 3.0m
depth including sorting out and stacking of useful materials and
disposing of the excavated stuff upto 50meter lead . ' (d) Soft
rock not required blasitng
(B) Excavation for foundation for depth from3.0 m to 5.0m
depth including sorting out and stacking of useful materials and
disposing of the excavated stuff upto 50meter lead . ' (d) Soft
rock not required blasitng
Filling available excavated earth (excluding rock) in trenches,
plinth, sides of foundations etc. in layers not exceeding 20 cm
in depth consoladating each deposited layer by ramming and
watering.
Filling in plinth with sand under floors including watering
ramming, consolidating and dressing etc. complete.
Providing and laying cement concrete 1 : 3 : 6 ( 1 cement : 3
coarse sand : 6 hand brocken stone aggregate 40 mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and plinth
Providing and laying cement concrete 1 :5 : 10 ( 1 cement : 5
coarse sand : 10 graded stone aggregate 40 mm nominal size)
and curing complete excluding cost of formwork in (A)
Foundation and plinth
Applying general insecticide pest control treatment floors,
cupboards, etc. including carrying out plinth treatment to pre /
post construction by spraying chemical solution for termite
control treatment including labour and materials consistent with
I. S. I. specification.
Providing TMT steel Fe:500 reinforcement for RCC work
including cutting bending binding and placing in postion
complete for all floor levels
Providing and applying anticarrasive treatment with polymer
base materials to the steel reinfarcement including descaling
the dust and applying the preventive coating of approved make
(for the R.C.C. structures near coastal area only ) etc complete.
11
Steel work welded, in built up sections, frame work including
cutting, hoisting, fixing in position and applying a priming coat
of red lead paint. a. In beams and joists, channels angles,
tees, flats with connecting plates or angle cleats as in main &
cross beamship & bridge work.Hip &jack rafters ,purlins
conneted toc ommon rafters and the like
7855
Kgs.
12
Providing & fixing M. S. grills of required pattern to wooden
frames of window etc. with M. S. flats at required specings &
frame alround square or round bars with round hended bolts
and nuts or by screws. (A) Plain grill
1947
kg
Providing & laying controlled cement concrete without flyash by
Ready Mixed concrete with lead of 10 Km from plant site
including all other taxes octroi, transportation, cost of pumping,
pouring, curing of concrete etc. complete excluding cost of
form work and reinforcement for RCC work (minimum cement
level as per IS 456 2000 shall be adopted for concrete grade).
C. Concrete Grade M- 250
Providing and applying anti carbonation, anti fading, mold
resistant, heat insulating, and 100% acrylic breathable
decorative external waterproof coating of approved shade
having Viscosity @ room temperature by ford cup no. b-4 (
dilute 2 parts of product with I-part of water) 18 to 30 sec. ph of
7.00 to 10.00 and sp.Gravity @room Temperature 1.30 + 0.1,
tested for carbon dioxide diffusion resistance properties for
coating materials and coating systems for exterior masonary
and concrete as per DIN EN 1062-6(2002-2010) by a NBA
Grade "A" accredited institution.
1644
cum
1741
sqm
15
Carting charges for ready mix concrete by transit mixer beyond
10 KM lead Additional lead (beyond 10 KM)
16A
Providing form work of ordinay timber planking so as to give a
rough finish including centering shuttering and propping etc.
height of propping and centering below supporting floor to
ceiling not exceeding 4.00 mt and removal of the same for in
situ reinforced concrete and plain concrete work in. (A)
Foundations, footings, bases of columns etc. and mass
concrete.
(B) Flat surfaces such as soffits of slabs landings and like (1)
floors etc. upto 200 mm thickness
(c) Vertical faces such as walls (any thickness) partitions.
(D) Columns, pillars, posts and struts (a) square, rectangular,
polygonal in plan
(e) Sides and soffits of beam, haunchings, cantilevers, girders
bracings and lintels not exceeding 1.0 mt in depth.
(Ii Edges of slabs & Breaks in floor & wall
Providing and fixing Jali block as per Kearjan bricks having size
180mm x 180mm x 110mm precast cement concrete jali or
grill 1:2:4 mix (1-Cement:2-coarse sand :4-graded stone
aggregate 6mm nominal size) reinforced with 1.6mm dia. Mild
steel wire including roughening,cleaning, fixing and finishing in
cement mortar 1:3 and curing complete.
1644 Cum./pe
r KM.
201 Sqm
13
14
16B
16C
16D
16E
16F
17
18
19
20
White stone bela maosnary block in course in super structure
with stone of approved quality in cement mortar 1 : 5 ( 1
cement : 5 course sand) including racking the joints etc.
complete.
Stone work for pergola, beam, columns, etc. sunk or moulded
or sunk and moulded upto any floor & to be fixed with bal grout
adhesive material as per manufacturer specification with an
admixture of pigment matching the stone shade. a. Jodhpur
tiwri stone
Extra for stone work sunk or moulded or sunk and moulded or
carved.
6665
Sqm
1020
3140
Sqm
Sqm
4645
Sqm
370
1650
Sqm
Sqm
893
Cum.
10
Cum.
10
Cum.
21
Providing and fixing aluminium work for doors, windows,
ventilators and partitions with extruded built up standard tubular
sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/ neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) : For
shutters of doors, windows & ventilators including providing and
fixing hinges/ pivots and making provision for fixing of fittings
wherever required including the cost of EPDM rubber /
neoprene gasket required
22
Providing and fixing 5.5mm thik clear float glass with gasket.
23
Providing and fixing 12MM thik prelamineted particla board
extrior grade.
Providing & fixing besco titan series toilet cubical system
comprising of following : Intermediate pillaster & door made
from Marino compact laminate as per IS 2046. Intermediate
panle is one continuos panel without any joints. All intermediate
panels will be 12 mm, pilaster & door shall be 18 mm thick
surface with edge core. All pilaster are supported by besco titan
series stainless steel bottom cladding. The base of the
stainless steel bottom cladding will be anchored to the floor
with a clearance height of 100 mm. Fixing of interemediate
panels to the wall shall be stainless steel `L' bracket or
stainless U channel section are fixed into wall with s. S. screw
inserts. All compartment will be equipped with the following
accessories. S. S. thumbturn C/W indicator, S. S. coat hook
C/W rubber stopper & Gravity hinges. S. S. latch indicator, S.
S. privacy thumbturn etc. All s. S. shall be grade 304 satin
finish. Complete as per manufacturer specifications.
Contractor shall provide 5 years maintenance free guar.de
once only for execution of all
items for such works.t concrete usin
24
25
26
27
28
Providing & fixing mortise latch of approved quality including 2
nos. S. S. brush finish handles of approved quality by fixing
with S. S. screws.
Providing & fixing keyless round lock of approved quality
including by fixing with S. S. screws etc. complete.
Providing & fixing 5mm thick S.S. brush finish hinges of
approved quality by fixing with S. S. screws.
Providing & fixing S. S. brush finish baby latch of approved
quality including by fixing with S. S. screws etc. complete.
1805
Kgs
80
Sqmt
150
Sqmt
340
Sqm.
60
Each
42
Each
174
Each
24
Each
29
30
Providing and fixing aluminium extruded section body tubular
type universal hydraulic door closer (having brand logo with ISI,
IS : 3564, embossed on the body, door weight upto 36 kg to 80
kg and door width from 701 mm to 1000 mm), with double
speed adjustment with necessary accessories and screws etc.
complete.
Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required)
and fitting the same with necessary stainless steel nuts and
bolts complete, i/c fixing the railing with necessary accessories
& stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist slab
with suitable arrangement as per approval of Engineer-incharge, ( for payment purpose only weight of stainless steel
members shall be considered excluding fixing accessories
such as nuts, bolts, fasteners etc.).
58
Each
6617
Kgs
31a
Providing & Laying 25 mm thick rough chiseled dressed Green
kotah stone flooring over 20 mm th. Based of C.M.(1:5) (1
cement : 5 coarse sand) including pointing with cement mortar
(1:3) complete including 10 mm thick wide groove.
1465
Sqm.
31b
Providing and laying polished kota stone slab 25mm thick in
risers of steps, Dedo and pillars laid on 10mm thick cement
mortar 1:3 (1-Cement ;3 coarse sand) and jointed with gray
cement slury including rubbing and polishing etc. complete.
50
Sqm
32
Providing & fixing at or near ground level precast cement
concrete kerbs, edging etc. setting in position with cement
mortar M - 20 including the cost of centring and shuttering and
finishing.
Providing and fixing 30 mm thick shot blasted paver tiles of
super / Vyara / Duracte brand of approved colour using M400
to be used in C. M 1 : 4 including joint filled white cement mixed
with pigment to match the sahde of tiles approved by the
architect and engineerin charge
Providing & fixing basant beton make natural rough cobble
coloured stones (in different colour combination) of the same
make to be used on cement mortar bedding 1 : 6 ( 1 cement :
6 coarse sand) including joint filled up with coloured cement to
match the shade of tiles as approved by the Architect.
1435
rmt
8250
Sqm
4465
Sqm
40 mm thick rubbed stone flooring over 20 mm (average) thick
base of cement mortar 1 : 5 ( 1 cement : 5 coarse sand) with
joints 3 mm thick side buttered with cement mortar 1 : 2 ( 1
cement : 2 storne dust) admixed with pigment to match the
shade of stone and pointing with same mortar. Red sand stone
186
Sqm.
33
34
35
36
Providing & fixing 30mm thick Red sand Stone work (machine
cut edges) for wall lining etc. (veneer work) upto 10 metre
height, backing filled with a grout of average 12 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) including
pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone shade :
125
Sqm.
37
Providing & fixing somany V.C shield Rustic digital tiles make (
special rustic series ) of anti - skid tiles flooring in Cement
mortar 1 : 4 including joint filled with white cement mixed with
pigment to match the shade of tiles, as per instruction of
Engineer incharge.
914
Sqm
38
Providing and laying cement concrete flooring 1:2:4 (1cement:2
course sand:4 graded stone aggregate 20mm nominal size )
laid in one layer finished with a floating coat of near cement a40
mm thick
Providing cement vata (10 Cm x10cm size) quarter round in
cemet mortar 1:1 including neat cement finishing watering etc.
complete.
Providing & laying ceramic tiles in skirting in riser of step and
dado in 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse
sand ) pointing in white cement & jointed with white cement
slurry.
200
Sqm
152
Rmt
1170
Sqm.
30
Sqm
507
Sqm
387
Sqm
39
40
41
42
43
Providing and laying polished Green Kota stone slab of even
shade flooring over 20 mm (average) thick base of cement
mortar 1:6 (1-cement:6 coarse sand) laid over and jointed with
grey cement slurry including rubbing and polishing etc.
complete (A) 25mm thick
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen
platforms, vanity counters, window sills , facias and similar
locations of required size, approved shade, colour and texture
laid over 20 mm thick base cement mortar 1:4 (1 cement : 4
coarse sand), joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc.
complete at all levels. Granite of any colour and shade
Providing and laying flamed finish Granite stone flooring in
required design and patterns, in linear as well as curvilinear
portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid
and jointed with cement slurry and pointing with white cement
slurry admixed with pigment of matching shade including
rubbing , curing and polishing etc. all complete as specified and
as directed by the Engineer-in-Charge
44
Providing and fixing to wall ceiling and floor 4 kg/cm2 working
pressure finolex or equvivalte.S.I. Mark PVC pipe of 110 mm
dia high density complete with special flinges, compressor type
fitting wall clips on wooden patti including making good the wall,
celling and floor on terrace rain water pipe shall be of 110mm
dia PVC horizontal pipe and bend reducer of 110mm vertical
pipe and 110 mm PVC bend at the end nearby ground level
(23.8.63 PVC)
444
Rmt.
45
Providing and laying integrated cement based proprietory water
poorfing treatment of required thickness over the roof including
20mm thick cement mortar 1:4 cement slurry and sloping out
terrace slabs with following specification laid to required slope
not flatter than 1 : 80 (the thickness of water proofing
treatement near rainwater outlet or the lowest point of the
finished slope shall not be less than 65 mm, including treating
the vertical surface of the parapet wall upto 30 cms. height
above finished level of terracing including finishing the top with
jointless water proofing plaster, curing, testing etc. complete
(area in plan shall only be measured and roundings, vatta etc.
shall not be measured). Including ten years performance of
guarantee bond to be given on stamp paper. (No extra shall be
paid for variation in thickness). a) Applying and grouting a slurry
coat of neat cement using 2.75 kg/sqm. Of cement admixed
with proprietary water proofing compound conforming to IS
2645 over the RCC slab including cleaning the surface before
treatments. b) Laying cement concrete using broken brick bats
25 mm to 100 mm size with 50% of cement mortar 1 : 5 ( 1
cement : 5 coarse sand) admixed with proprietary water
Providing and laying in situ seven course water proofing
treatment with APP (Atactic poly-propylene) modified Polymeric
memberane over roof consisting of first coat of bitumen primer
@ 0.40 Kg per sqm, 2nd, 4th & 6th courses of bonding material
@ 1.20 Kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and 5th layers of
roofing membrane APP modified Polymeric membrane 1.5 mm
thick of 2.25 Kg/sqm weight consisting of five layers
prefabricated with centre core as 20 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film.
7th, the top most layer shall be finished with brick tiles of class
designation 10 grouted with cement mortar 1:3 (1cement : 3
fine sand) mixed with 2% integral water proofing compound by
weight of cement over a 12 mm layer of cement mortar 1:3 (1
cement : 3 fine sand) and finished neat (item of laying brick
tiles shall be paid for separately).
1025
Sqm
1575
Sqm
46
47
Providing & installing integral crystaline water proofing
treatment FOR base, walls, Bottom slab, ug tank, side wall etc.
to be carrid out as per the manufacturer's specifications and as
detailed in technical specification, complete. Work shall be
carried out as per the approved method of water proofing by
pennetron, USA having speed of penetration of 31 cms in 56
days and resistance to 16 bar hydrostratic water head on
negetive side. Using penecrete slurry [email protected] 1 kg/Sqm & penetron
mortar filling in joint etc. complete.
360
Sqm
48
Providing 10 mm thick cement plaster in single coat on ceilings
for interior plasteing for all floors levels and finished even and
smooth finishing with cement slurry. (ii) Cement Mortar 1:4 (1
cement :4 Sand)
Providing 15mm thick cement plaster single coat brick
concrete wall for interior plastering for all floor levels finished
even and smooth with cement slurry. (ii) Cement Mortar 1:4 (1
cement :4 Sand)
Providing and fixing of HERITAGE Grit Finish textured
homogeneous wall fininshing system including double coat
mala cement plaster on interior brick/concrete work for
plastering comprising of base coat of 12mm thick cement
mortar (1 Cement: 4 Coarse sand) in rough finishing and 8 mm
thick top coat of cement mortar1:2 (1 Cement:2 coarse sans)
finished with trovel including scaffolding curing etc.complete.
from BAKELITE HYLAM LTD consiting of a two component
system of Dry Grit (25 Kgs per pack) made of pure natural
minerals,additives etc, and pure acrylic polymer bonding agent
(5Kgs per pack) with the applied thickness of the coating being
between 1.0mm-1.5mm tobe applided on a cured,smooth level
plaster without keying, as per the shades/combinations
approved applicator of the manufacturer, as per the
directions/supervision of the engineers in charge, all complete.
The above textured coating should conform to surface spread
of flame class on of BS 476; Part 7:1971 and Pull off strength
of the coating to meet JISA 6909
6675
Sqm
12095
Sqm
6775
Sqm
3000
Sqm
4845
Sqm
49
50
51
52
Providing & apllying waether proof Apex/Excel make
antifungus exterior wall paint2 coats as per manufacture
specification of required shade to give an even shade after
thoroughly brushing the surface, free from mortar dropping &
other foreign matter & also including preparing the surface
even & smooth upto satisfaction of Architect/Engineer-In_
Charge
Applying Two coats of brila or asian acrylic lappy (Putty) and
two coats of primer of approved brand and manufacture on
new wall surface to give an even shade including throughly
brushing the surface free from cemnt droping and other foreign
matter and sand papered smooth.
Wall painting (three coats) with plastic emulsion paint of
approved brand and manufacture on undecorateed wall
surface to give an even shade including throughly brushing the
surface free from mortar droppings and other foreign matter
and sand papered smooth. Rates including cost of providing
and applying primer and putty.
Painting two coat with enamel paint brushing interior over new
steel and other metal surface to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter
including priming coat after over and including preparing the
surface by thoroughly cleaning oil, grease, dirt and other
foreign matter and scoured with brushes and fine steel wool,
scrapers and sand paper with ready mixed priming paint
brushing red lead etc. complete as directed.
17845
Sqm
165
Sqm
55
Providing & fixing hydro pneumatic system for toilets
comprising of following. ITT Lowara make 3 pumps hydro
pneumatic system model - Aqua FS 22SV03 G030P-300, 2
working + 1 stand by set consists of : Two fixed speed electric
pumps with single phase motro, HM series. 3 K. W 4 H. P., 230
V single phase, stainless steel - 304 Two control pressure
switches connected to the delivery manifold. A mounting base
for the electric pumps equipped with vibration dampers and
made of fabricated sheet metal with powder coating. Hot
dipped galvanized suction & delivery manifold ready for the
connection of diaphragm tank and equipped with a pressure
guage. One non - returen valve for each electric pump & one
on the delivery side One on - off valve on suction & delivery
side each. Electric panel fro three phase / singel phase power
supply, with casing made of steel, fitting with main doorlock
switch, startup contactors, single phasing protection for three
phase pumps and thermal magnetic motor protectors and
programmable logicg cleaning the surface before treatments.
b) Laying cement concrete using broken brick bats 25 mm to
100 mm size with 50% of cement mortar 1 : 5 ( 1 cement : 5
coarse sand) admixed with proprietary water proofing
compound conforming to IS : 2645 over 20 mm thick layer of
cement m
4
set
56
Providing & fixing dust bin made out with S. S. pipe framing &
C. P. teak wood patti with fibre strip raping shown in drawings.
53
Nos.
57
Providing & fixing sandwitch pattern benches size 1.5mtr X 0
.60 X 0.60 mtr heightr with top of granite & bottom with polished
kotah stone & support with same pattern on cement mortar
bedding 1 :4 ( 1 cement : 4 coarse sand) including moulding of
the edges joint filled up with coloured cement to match the
shade of stone as approved by the Architect.
28
Nos.
53
54
58
Providing and fixing rolling shutters of approved make made of
80mm wide M.S. laths inter-locked together through their entire
lenghth and jointe together at the ends by end locks mounted
on specially designed pipe shft with brackect plates, guide
channels and arrangements for inside and outside locking with
push-pull operation complete but including the cost of hood
cover and spring.
164
Sqm
59
Providing and fixing in position callapsible steel shutters with
vertical channels 20x10x2 mm braced with flat iron diagonals
20x5 mm size with top and bottom rails of T_rin 40x40x6 mm
with 38mm dia, steel pulleys complete with bolts,nuts,locking
arrangements,stoppers handles including applyin a priming
coat of read lead paint.
171
Sqm
60
Providing and fixing double scaffolding system (cup lock type)
on the exterior side of building/structure, upto 25 metre height,
above ground level, including additional rows of scaffolding in
stepped manner as per equirement of site, made with 40mm
dia M.S. tube, placed 1.5 metre centre to centre, horizontal &
vertical tubes joint with cup & lock system with M.S. Tubes,
M.S. tube challis, M.S. clamps and staircase system in the
scaffolding for working platform etc. and maintaining it in a
serviceable condition for execution of work of cleaning and/ or
pointing and/ or applying chemical and removing it thereafter.
The scaffolding system shall be stiffened with bracings,
runners, connecting with the building etc, wherever required, if
feasible, for inspection of work at required locations with
essential safety features for the workmen etc., complete as per
directions and approval of Engineer-in-charge. (1) The
elevational area of the scaffolding shall be measured for
payment purpose. (2) The payment will be made once only for
execution of all
items for such works.
500
Sqm
61
Providing and applying antifungal wash treatment using 3%
solution of sodium pentachlorophenate, of reputed brand and
manufacturer, on cleaned sand stone surface at desired
locations as per direction of Engineer-in-charge (The rate is
inclusive of all materials & labours involved except scaffolding).
1000
Sqm
62
Applying two or more coat of Ethyl Silicate chemical as
approved by Archaeological Survey of India/ Engineer-incharge, of approved brand and manufacturer, with brush or
spray on the existing stone masonry surface till there is no
further absorption of chemical by stone surface, including
protecting the applied surface from direct
sunlight by suitable means during application, all complete as
per direction of the Engineer-in-Charge (The rate is inclusive of
all materials & labours involved except scaffolding).
1600
Sqm
63
Applying breathable, non-reactive, antifungal, and water
repellant Silane/ Siloxane chemical as approved by
Archaeological Survey of India/ Engineer-in-charge, of
approved brand and manufacture, diluted with solvent mineral
Turpentine oil in the ratio of 1:12 (One
part of approved chemical :12 Part of Turpentine oil), on the
existing sand stone masonry surface with two or more coats to
give uniform application of chemical on the surface, all
complete as per direction of Engineer-In-charge (The rate is
inclusive of all materials & labours involved except scaffolding).
1600
Sqm
64a
Providing & fixing Trac moudular Heritage Ground mounted
signage system consisting of alu. Extruded frame & 150 wide
double sided panels with required graphics for exterior
purpose. The panels are having coil coated finish for exterior
purpose. a. Frame considered of 5 plates - 1500 mm
11
Nos.
64b
65a
b. Frame considered of 5 plates - 2000 mm
Providing & fixing of stainless steel brush finish plate signage
with letters & graphics hitching on 0.7 mm thick plates. a. 600 x
100 mm
b. 450 x 100 mm
Providing and fixing of LED sinages with battery back up having
vinyl signage in colour background with singlr side legend. a.
452x360x80
Providing and fixing of LED sinages with battery back up having
vinyl signage in colour background with double side legend. a.
452 x 360 x 80
PLUMBING WATER SUPPLY AND SANITAYRY FITTINGS
WORK : Providing and laying in trenches galvaished mild
steel tubes (meduim grade of the following) nominal bore, and
tube fitting (earthwork in trenches to be measured and paid for
separately) joints shall be scaled by pipe sealent. (D) 40mm dia
5
27
Nos.
Nos.
12
33
Nos.
nos
23
nos
65b
66
67
68a
1150
Rmt.
68b
69a
(E) 65mm dia
Providing and fixing in consealed manner Kitec make pipes as
per manufacturer's specifications socket and screwed jointed
complete with fitttings such as tees, crosses, plugs sockets,
elbows, reducers, clamps, sleeve pieces suspenders, unions,
check nuts, bends etc., including cutting and making good the
walls floors RCC work etc. complete. b. 15 / 20 mm dia pipe
50
360
Rmt.
Rmt.
69b
69c
69d
70a
c. 20 / 25 mm dia pipe
d. 25 / 32 mm dia pipe
e. 32 / 40 mm dia pipe
Providing and fixing to wall ceiling and floor U.PVC / SWR soil
waste pipe with oring of ISI 13592/92. Rate inclusive of all
fittings like single or double `Y' with door, reducer, coupler
single `T' with door band, pipe clip on wooden patti etc.
complete and making good the wall ceiling and floor. (A)
75mm dia.
(B) 110mm dia.
Providing and fixing in position UPVC cowel went to pipes (A)
75mm dia
34
323
110
414
Rmt.
Rmt.
Rmt.
Rmt.
60
50
Rmt.
Each
70b
71a
71b
72
73
74
75
(B) 110mm dia.
Providing and fixing U PVC floor trap of the following nominal
diameters of self cleaning design with grating including cost of
cutting and making good the walls and floor 100mm inlet and
75mm outlet.
Providing and fixing concealed center point to wall ceiling &
floor CPVC (SDR 13.5) pipe having national sanitation
foundation (NSF) seal for potable water of following dia nominal
bore tube fitting and clamps including making good the wall,
ceiling and floor etc. complete. (B) 50 MM
Providing and fixing fo r610x510 mm bowl depth 200 mmsize
s,s, 304 grade stainless steel sink with swinging spout sink
cock,waste coupling, PVC wast pipe up to floor trap etc
completed directed.
Providing and fixing white glazed vitreous china integrated `P'
or `S' with or without vent) with concealled pipes M. S. CHAIR
brackets, (JAGUAR CNS/WHT/WS01 EWC) modelwith Same
make pvc sheet & cover with Jaguar Metropole flush valves
dual flow ( 2 ltr & 4 ltr) including all required labour & materials
etc complete as directed
8
80
Each
Each
103
Rmt
40
EACH
14
Each
76
Providing and fixing orissa patern water closet(Indian type W.c
pan) size 580 mm in including painting of fittings and brackets,
Earth work , bec concrete foot rests and trap etc complete as
directed. '(A) vitreous china (I) Long patten =White colour
4
Each
77
Providing and fixing JaguarURS-WHT-0702 Urinal Urinall
white glazed Urinal basin with white glazed vitreous china, 15
mm dia C. P. brass with heavy quality C. P. brass inlet
connection of required length with brass union, washer and C.
P. brass dome and spreaders with C. P. brass union and
clamps, heavy quality c. p. brass bottle trap of Jaqyar or Nelson
make and concealed connection 32 mm dia G. I. concealed
waste pipe with fittings upto the floor trap / including
constructing channel above finished floor level with required
brick work & P. C. C. work complete including cutting and
making good the walls, RCC work and floor etc., wherever
required.
Providing and fixinge wash basin Jaguar Model no. CNS-WHTWB02 with STOP COCK )including 32mm dia waste couplin,
bottel trap, 32mm dia concealled waste pipe up to floor trap, 15
mm heavy quality flexible P.V.C. inlet connection of required
length with brass union, washer and C. P. brass cap including
cutting holes and making good the same inclding fittings.
38
Nos
25
Nos
27
Each
38
Each
78
79
80
Providing & fixing SNR-51021 Sensotronic Sensor Faucet for
Wash Basin automatic water tape for wash basin of AOS
system or equi. Make.
Providing & fixing
JAGUAR SNR-51087 Sensotronic
Concealed Type Flushing Valve for Urinal Complete Set with
Installation Box with Control Cockauto flush system for urinal
conmplete concealed model etc. complete.
81
Providing & fixing kimberly clark make compact paper napkin
dispenser including necessary S.S screws etc. complete as
directed as per instruction of EIC / Architect ( Carl F / d line)
17
Each
82
Providing & fixing toilet paper holder Jaquar cat no. ACN- 1153
N as per instruction of EIC / Architect
Providing and fixing cast iron steps of size 500 mm x 150 mm x
22.5 mm and painting with two coats of anticorrosive paint etc.
complete.
Providing & fixing in position 18 mm thick mirror polished
telephone black granite slab for Urinal partitions machine cut,
120 cm high x 60 cm deep, rubbed and polished with edges,
corners, rounded off including making necessary chases in the
walls and fixing the same with cement concrete 1 : 2 : 4 ( 1
cement : 2 coarse sand : 4 graded stone aggregate of 6 mm
nominal size) and finished smooth with white cement with
mixed with pigment to match the shade.
18
Each
80
Each
43
sqmt
Providing and fixing 600 MM x 450 MM bevelled edge mirror of
superior glass mounted on 6 Mm thick A.C sheet or plywood
sheet and fixed to wooden plugs with C.P brass screws and
washers.
Providing & fixing Planet/Aadit make S. S. perforated pedal
bins dust bin 11 ltr capcity etc. complete as directed.
32
Each
55
Each
Providing and fixing 15mm dia long body bib cock of jaguar
continental series etc. Completed as directed
Providing and fixing Jaquar AQN-7721 Towel Ring Round C.
P. Napkin ring of make "Jaquar" and type approved by the
Architect.
Providing and fixing Gun Metal check or non - return full way
wheel valve. (E) 40 mm dia
Providing and laying (to level of slopes) with cement concrete
1:5:10 (1-cement : 5-Fine sand :10-Graded stone aggregate
40mm nominal size ) bedding for stoneware pipes of following
internal diameters with and jointing with stiff mixture of Cement
Mortar in proportion1:1 Salt glazed stoneware pipes including
testing of pipes and joints complete.necessary formwork and
curing complete. (A)100mm dia.(112 mm avg. bed thickness)
42
Each
18
Each
49
Each
142
meter
meter
EACH
83
84
85
86
87
88
89
90a
90b
91
(B)150mm dia.(116 mm avg. bed thickness)
Providing and fixing S.W. gully trap with C.I. grating brick
masonry chamber and water tight C.I cover with frame of
300mm x300 mm size (inside) with standard weight.(A) 100mm
x100mm size P type (B) 150mm x 100mm size P of R type
590
59
92
Providing & fixing hand shower health faucet Jaguar ALD-BLK583 Hand Shower (Health Faucet) (ABS Body) with 1 Meter
Long PVC Tube & W all Hook 1 & 1 1/2 m PVC tube &
swinging wall hook of Jaquar cat. No. cont. 553
Providing & fixing Jaquar make c. P. brass double robe hook
AKB-35761 including fixing with S. S. screws, wooden cleats
etc. complete as directed.
18
nos
20
Nos
93
94
95
Providing & fixing Jaquar make c. P. brass continental series
100mm dia shower with arm including fixing with S. S. screws,
wooden cleats etc. complete as directed.
Constructing brick masonary chamber for under ground C.I
inspection chamber and bends with bricks having crushing
strength not less than 35 kg / sqcm in cement mortar 1:5 C.I
cover with frame (light duty ) 450 mm x 610 mm internal
dimensions, total weight of cover with frame tobe not less than
38 kgs. ( weight of cover 23 kgs and wt of frame 15 kgs)
.R.C.C top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4
graded stone aggregates 20 mm size ) foundation concrete
1:5:10 insisde plaster 15 mm thick with cement mortar 1:3
finished smooth with a floating coat of neat cement on walls
and bed concrete etc. complete. '(I) Inside dimensions, 455
mm x 610 mm and 450 mm deep for single pipe line.
16
Nos.
37
Each
96
Providing & constructing B. B. masonry in C. M. 1 : 6 ( 1
cement 6 coarse sand) and cement concrete 1 : 2 : 4 ( 1
cement : 2 sand : 4 graded stone aggregare of 20 mm nominal
size B. T. kapachi) SAPTIC tank of 3 M x 0.9 m x 1.5 M internal
dimsion with necessary compartment of grit chamber and
septic tank with necessary inlet and out let connection with
cement plaster ( 15 mm thick) in C. M. 1 : 4 ( 1 cement : 4
sand) with water proofing materials 1 : 5 : 10 ( 1 cement 5 sand
: 10 brick bats aggregate 40 mm nominal size) brick bats
concrete bedding R. C. C. 1 : 2 : 4 top cover slab 12 cm. thick
with C. I. cover of 60 cm x 45 cm size (light duty) 75 mm dia C.
I. ventilating pipe 2 mtr. long with cowl vent, 40 mm thick I.P.S
flooring 10 cm thick cement vata mild steel for slab and
finishing to exposed faces in C. M. 1 : 3 ( 1 cement : 3 sand)
curing etc. complete as directed by E.I.C. sIZE : 6.80 X 2.40 X
1.1 METRE CLEAR DEPTH.
8
Each
97
Providing & construction soak well of 4.0 m dia & 6.00 m depth
dimension including Brick masonry solid and honey comb
masonry in C. M. 1 : 6 ( 1 cement : 6 sand), RCC 1 : 2 : 4 (
1cement : 2 sand 4 grade stone aggregate 20 mm nominal size
of B. T. kapchi) top slab thick with C. I. manhole cover 60 cm x
45 cm size (medium ) 75 mm C. I. ventilating pipe 2 M. long
with 75 mm dia. Cowel vent and including filling brick bats of
required size and depth including cost of reinformcement
excavation refilling finished top of slab with C. M. 1 : 3 ( 1
cement : 3 sand) curing, etc. complete as direct by E.I. C.
8
Each
98
Providing and fixing C. I. manhole cover 0.60 m x 0.45 m size
having weight not less than 35 kgs.
10
Each
99
Providing and Fixing Solid Compact Laminate Locker Series
(A5) of Merino-Besco make and it shall comprise of Doors
9MM solid compact laminate, Back and Side Dividers of 3MM
thick compact laminate, Top and Bottom of 9MM thick compact
laminate and Internal shelf will be of 9mm Thickness. Lockers
to be constructed with 4 Aluminium Interlocking Supporting
Framework which makes it strong and rigid. Concealed Hinges
of SS 304 Grade. 5 pin security cam lock or hasp lock with
plastic plate. Standard Dimension of Locker Unit shall be:
Width 300MM x Depth 450MM x Height 1800MM.
834
nos
100
Providing and placing on terrace (at all floor levels)
polyethylene water storage tank, ISI : 12701 marked, with cover
and suitable locking arrangement and making necessary holes
for inlet, outlet and overflow pipes but without fittings and the
base support for tank.
60500
litre
101
Providing and fixing half round tiled roofing with manglore tiles
including teakwood reepers of size 50mm x 35 mm
Providing and fixing c.p. brash shower 100mm dia with spout
1733
sqmt
16
each
103
Supplying and installation of water cooler of AQUAGUARD
PURE CHILL RO 80 PSS (RO+COOLER) (Cooler Capacity
60/80 LPH & R.O Capacity 50 LPH) complete as directed / EIC
/ Architect. AS PER MANUFACTURER SPECIFECTION WITH
WARRINTE.
3
Nos.
104
Providng and laying 25MM THICK marble stone slab flooring
over 20 MM (average) base of cement mortar 1:6 (1 cement :6
course sand ) or L.M. 1:15 laid and jointed with white cement
slurry including rubbing and polishing complete. Marble slab
25mm thick
95
sqmt
105
Providing & fixing Cera Crane model including One set Crane
consists:1 EWC, 1 Cistern with fittings, 1 Seat cover, 1 Wash
basin ,bottle trap), 2 Grab bars, 1 Hinged rail and 1 Faucet with
spatula lever make handicapped toilet set ( 7011 EWC P
Concealed 740 x 520 x 835 mm, 7111 Cistern 7311 Seat
Cover 7211 Fittings 7707 Wash Basin 450 x 300 mm etc.
complete as directed.
4
Set.
106
Demolition including staking of serviceable materilas and
disposal of unserviceable materials with all lead and lift.
(exsting toilet block)
1
Job.
102
107
Providing & fixing glow signages board comrising of : Flex:
Flexible substrate 3M Panagraphics II flexible substrat, Avery
or Equivalent. Vinyl: Pantone Colour 3M, Avery or Equivalent
Intense Blue Pantone 300 C 3M, Avery or Equivalent Orange
colour for STAR and the bottom line Pantone 1655 C 3M,
Avery or Equivalent Tangerine colour for STAR Pantone 151 C
3M, Avery or Equivalent including 1 tube light for every 4 sq.ft.
Along the length of the sign. 2. Tube light has to be Philips /
Wipro / Osram / Bajaj make only. 3. Overlap between 2 tube
lights must be minimum 75 mm to prevent dark bands. 4.
Copper ballast Philips / Wipro / Osram / Bajaj make only. The
box frame has to be covered from top, bottom, with 24 gauge &
back side covered with 26 gauge thick GI sheets powdercoated. Sign Cabinet 1) MS square pipe of 1” x 1” cross section
& 18 gauge thickness & MS square pipes along with 1” x 1”
cross section & 18 gauge thickness as stiffeners. Painted with
one coat of Antirust paint and 2 coats of enamel paint.
Graphics to be computer-cut with translucent cast vinyl
matching PANTONE shades incudinf P/F timer . etc comlete as
per Architects Instruction
11
sqmt
108
Providing & fixing Corner guard(HK 9090) size 90(RW) X
90LWX 1000MM HIGHT) as per specification OF Korea car
stopper co. Ltd.
Providing & fixing Colour guard(HK 1412) size140(W) X
120HX 750mm L) as per specification OF Korea car stopper
co. Ltd.
280
Nos.
176
Nos.
Providing & fixing Complex pp Speed Hump size600(W) X 50
HX free mm L) as per specification OF Korea car stopper co.
Ltd.
Providing & fixing Deck Bumper (HK 1580) size200(W) X 150
HX 750 mm L) Color: Black with 3 yellow hole capsas per
specification OF Korea car stopper co. Ltd.
Porviding & fixing precast cement concretr benches and
seating arrangement as per detail drawing in C.C. 1:2:4
including necessary shuttering and fixing the same in C.C.
1:3:6 with required excavation etc. complete as directed (Cost
of excavation and p.c.c. & reinforcement shall be paid
separately.
26.4
Rmt.
556
RMT
360
cmt
109
110
111
112
113
Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m
high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long
and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3
nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together
at site with required six numbers of 8 mm dia. and 30 mm long
bolts, including painting two coats with synthetic enamel paint
of approved brand and manufacture over a coat of primer. One
name plate of 1 mm thick M.S. sheet of size 250x100 mm shall
be welded to the tree guard near the middle height and lettered
CPWD / PWD/ any other approved name. The tree guard shall
be suitably fixed to the ground by embedding four legs of tree
guard in pits of suitable dia and to a depth of 25 cm, refilling the
pits with soil and ramming, complete in all respect as per
satisfaction and direction of Officer-in-charge.
97
each
114
Providing & fixing tensile fabric with structure with top cover of
fabric with ferrari 502 / Mehler Tivoli grade fabric make
architectural fabrics with excellent UV, Fire Retardancy, Tear
Resistant properties (Model : Airone Max - coupled) between
the two wings of the buildings. Rate also included for round /
square M. S. pipes & cables as per design of ferrari / mehler
vendors.
Providing and laying Plain Cement Concrete 1:1½:3 viz. M - 20
of 150 mm average thickness for Trimix Concrete Flooring,
using 25mm down aggregate and thoroughly washed sand,
which is free from all foreign materials as approved by
Architect/Engineer / Engineers & Poylpropelene Fibremesh of
approved make ( 125 gm/ Cement Bag of 50 Kg ). It is to be
laid in any thickness, shape or size, as per drawings and
specifications.Including all the materials required for formwork,
centering and scaffolding & reinforcement wherever required,
at all depths and heights. Consolidating the same, including
vibrating with needle of surface vibrator. The curing must be
done for a period of 7 days. It should be processed with
Vacuum Dewatering System, including of surface vibrating and
levelling the surface with screed vibrator, vacuum dewatering
the surface, power trowelling the surface to make it smooth and
finished, including groove cutting upto 20 mm deep and 5 mm
wide onstruction/Expansion joints and making a panel of
approx Graphics to be computer-cut with translucent cast vinyl
matching PANTONE shades incudinf P/F timer . etc comlete as
per Architects Instruction
144
sqmt
2007
sqmt
13.5
Rmt
115
116
Providing & fixing at site marble stone jali (50mm tick) with
moulded marble vertical supprtsincluding sunk moulding &
polishing etc comlpte & fixing the same in white cemnt as
directed as per drawing & design.
117
Automatic Boom barrier gate : Providing and fixing DITEC ,Italy
make , CE certified ,QIK , automatic barrier , comprising of soft
edge , gear motor mounted at right angle ,rounded bars ,high
perfomance and suitable for any type of installation enviroment
complete with a key operated release system . Main functions:
The system having 230 V power supply , buffer batteries ,direct
current motor with high performance in terms of speed and
number of operations, obstruction detection system which
causes the gate to stop or reverses operation when an
obstruction is detected
8
Nos.
118
Providing & fixing glow signages board comrising of : Flex:
Flexible substrate 3M Panagraphics II flexible substrat, Avery
or Equivalent. Vinyl: Pantone Colour 3M, Avery or Equivalent
Intense Blue Pantone 300 C 3M, Avery or Equivalent Orange
colour for STAR and the bottom line Pantone 1655 C 3M,
Avery or Equivalent Tangerine colour for STAR Pantone 151 C
3M, Avery or Equivalent including 1 LED light for every 2 sq.ft.
Along the length of the sign. 2. LED light has to be Philips /
Wipro / Osram / Bajaj make only. The box frame has to be
covered from top, bottom, with 24 gauge & back side covered
with 26 gauge thick GI sheets powder-coated. Sign Cabinet 1)
MS square pipe of 1” x 1” cross section & 18 gauge thickness
& MS square pipes along with 1” x 1” cross section & 18 gauge
thickness as stiffeners. Painted with one coat of Antirust paint
and 2 coats of enamel paint. Graphics to be computer-cut with
translucent cast vinyl matching PANTONE shades incudinf P/F
timer . etc comlete as per Architects Instruction.
32.4
Sqmt
119
BORE WELL : Boring/drilling bore well of 350mm dia for
casing/ strainer pipe, by suitable method prescribed in IS:
2800 (part I), including collecting samples from different
strata, preparing and submitting strata chart/ bore log,
including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per
direction of Engineer -in-charge.in rocky strata & bouklders
70
Rmt
120
Supplying, assembling, lowering and fixing in vertical position
in bore well,100mm dia unplasticized PVC medium well casing
(CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer -incharge.
40
Rmt
121
Supplying, assembling, lowering and fixing in vertical position
in bore well 150mm dia unplasticized PVC medium well
screen (RMS) pipes with ribs, conforming to IS: 12818,
including hire & labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer-incharge.
Supplying, filling, spreading & leveling stone boulders of size
range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction of
Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5
mm to 10 mm, in the recharge pit, over the existing layer of
boulders, in required thickness, for all leads & lifts, all
complete as per direction of Engineer-in-charge.
30
Rmt
3
Cum
3
Cum
Supplying, filling, spreading & leveling coarse sand of size
range 1.5 mm to 2 mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per
direction of Engineer -in-charge.
Development of tube well in accordance with IS : 2800 (part I)
and IS: 11189, to establish maximum rate of usable water
yield without sand content (beyond permissible limit), with
required capacity air compressor, running the compressor for
required time till well is fully developed, measuring yield of
well by "V" notch method or any other approved method,
measuring static level & draw down etc. by step draw down
method, collecting water samples & getting tested in
approved laboratory, i/c disinfection of tubewell, all
complete, including hire & labour charges of air compressor,
tools & accessories etc., all as per requirement and direction
of Engineer-in-charge.
3
Cum
4
Hour
126
Supplying & Installation for aquatics upaj make submersible
pump set for bore of 150 mm dia or more having 3 H. P. a. 8
stage 200 L. P. M. Head 24 mtrs. With starter & flat 4.0 sq.mm
cable with panel For 50 mm dia delivery pipe.
3
Nos.
127
submersible pump set : Providing and fixing 1.5 HP
mono block submersible pump set including starter &
pannel etc .complete as directed.
1
Nos.
FIRE WORK : Pump Room. : Pump : Main Fire Submersible
Pump 40HP @70M Head. SITC of Main Fire Submersible
Pump 40HP @70M Head. Pump mod : 2510PJF400 Discharge
in LPM : 1620 Head in MTR : 70 HP/KW : 40.0/30.0 No of
stages : Single Method of starting : Star delta Lead cable length
& size : 10 mtrs 2x3x10.0 sq mm
1
No.
122
123
124
125
128
129
130
131
132
133
134
135
136a
136b
137a
137b
138a
138b
139a
139b
140
Supply, Installation, Testing & Commissing of Jockey Fire
Submersible Pump [email protected] Head.
SITC of control Panel suitable for above 40.0 HP fire pump set
with its main contractor and over load relay of L&T or ABB
make only with all required features for fire application including
annunciation of ON-OFF switch facility:
1
No.
1
No.
Cabeling for Pump. : SITC of 3 core X 16sqmm Armored cable
for main Pump.(from pump to panel)
SITC of 2 Core X 2.5 sqmm Armoured cable for Jockey Pump
(from pump to panel)
SITC of 2 Core X 1.5 sqmm Coper Armoured cable for
Pressure switch.
Providing and fixing of dial type Pressure Guage having 100
mm dial & range of 0-15 Kg/cm2 with syphon and gauge cock.
12
Metre
12
Metre
12
Meter
3
Nos.
Providing & fixing of Pressure switch with Needle Valve.
Providing and fixing, testing and commissioning of
C.I.Butterfly valve PN10 with Flanges. Nut bolts, Gaskets
completed as required. 150 mm dia
80mm
Providing, fixing, testing and commissioning of C.I. Dual plate
type Non-Return Valve class PN 10 rating with fittings,
flanges, nutbolts, washers, gaskets etc.of sizes: 150mm dia
2
2
Nos.
Nos.
2
1
Nos.
No.
80mm dia
Providing, fixing, testing and commissioning of Above Ground
M.S. ERW Black B Class Medium Duty pipes as per IS: 1239
(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above)
including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps,
hangers etc. with painting of one coat of primer and 2 or more
coats of synthetic enamel paint of approved make / shade
complete as per specification. 150mm dia
1
12
No.
Meter
80mm dia
Providing, fixing, testing and commissioning of Above Ground
M.S. ERW Black B Class Medium Duty pipes as per IS: 1239
(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above)
including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps,
hangers etc. with painting of one coat of primer and 2 or more
coats of synthetic enamel paint of approved make / shade
complete as per specification. 150mm dia.
12
54
Meter
Meter
80mm dia
Providing, fixing, testing and commissioning of Under Ground
M.S. ERW Black B CLass Mildduty pipes as per IS: 1239 (upto
150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) with
IWL/pypecoat, 4mm thickness wrapping and coating and
providing all fittings like flanges, tees, elbow, fasteners with all
required. 150mm dia.
6
6
Meter
Meter
141a
141b
142
143
144
145
146
147
148
149
150
151
152
153
154
155
Providing and fixing, testing and commissioning of
C.I.Butterfly valve PN10 with Flanges. Nut bolts, Gaskets
completed as required. 150mm dia.
80mm dia
Providing, fixing, testing and commissioning of C.I. Dual plate
type Non-Return Valve class PN 10 rating with fittings,
flanges, nutbolts, washers, gaskets etc.of sizes: 150mm dia
2
Nos.
1
1
No.
No.
Fire Fighting Equipement : Providing, fixing, testing and
commissioning of
SS Single Headed Oblique Pattern
Hydrant Landing Valves as per IS: 5290 with 80 mm dia
flanged inlet & 63 mm dia female outlet complete with cap and
chain etc.
Providing, fixing, testing and commissioning of SS Branch
Pipe with nozzle of 25 mm nominal bore outlet suitable to fit
with standard instanteneous type 63 mm dia coupling. As per
IS:903
Providing, fixing, testing and commissioning of 63 mm dia 15m
long RRL Hose Pipe with 63 mm dia.Type A Male and female
Stainless Steel couplings duly binded with GI wire, rivets etc.
conforming to IS 636 as required.
Providing, fixing, testing and commissioning of weather proof
standard fire Hose Cabinet wall mounting type 18 Guage.
(750 x 600 x 250) having Double Opening with M.S.
fabricated stand, necessary locking arrangement by allan key.
5
Nos.
5
Nos.
10
Nos.
5
Nos.
Providing, fixing, testing and commissioning of Wall mounting
swing type first aid Fire Hose Reel with drum, hanging
bracket, 36 M x 25 mm dia high pressure hose reel tubing as
per IS:884 with shut nozzle and ball valve and all required
accessories.
Fire Brigade Inlet : Providing, fixing, testing and commissioning
of CI Two way Fire Brigade Inlet as per IS: 904 having 63
mm dia inlet with blank cap and chain with 100 mm dia Butterfly
valve necessary fittings, flanges, nutbolts, gasket and all
required accessories.
Providing, fixing, testing and commissioning of 25 mm dia Air
Release Valve and Ball Valve assembly on top of each riser
for Air release system.
Fire Extinguisher : Dry Chemical Powder cartridge type fire
extinguisher of capacity 6 Kg Confirms to IS 2171, bearing ISI
forged cap and CO2 Gas cartridge of 120 gm (IS 4947). Fitted
with 500 mm long hose, filled with Sodium Bi Carbonate based
Dry Powder (IS 4308), with wall mounting bracket.
5
Nos.
1
No.
1
No.
5
Nos.
CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2
Gas as per IS 15222 with controll discharge mechanis, fitted
with Hose & Horn applicable on Class B fire rating 21B
confirms to IS 15683 bearing ISI mark. Co2 cylinder as per IS
7285
Manual Fire Alarm System : MCP
Hooter
6 Zone Panal for Fire Alarm System.
Cable for MCP & Hooter 2 core X1.5 sqmm.
5
Nos.
5
5
1
150
Nos.
Nos.
No.
Meter
Sprinkler System for Parking Area. : Providing, fixing, testing
and commissioning of Above Ground M.S. ERW Black B
Class Medium Duty pipes as per IS: 1239 (upto 150 mm dia.)
and IS: 3589 (upto 200 mm dia. And above) including cutting,
screwing, welding etc. and providing all fittings like flanges,
bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic
enamel paint of approved make / shade complete as per
specification. 25mm dia
40mm dia
50mm dia
65mm dia.
80mm dia
Providing, fixing, testing and commissioning of C.I. Dual plate
type Non-Return Valve class PN 10 rating with fittings,
flanges, nutbolts, washers, gaskets etc.of sizes: 80mm dia
462
Meter
138
60
60
102
4
Meter
Meter
Meter
Meter
Nos.
50mm dia
Providing and fixing, testing and commissioning of UL listed
Pendent type quick response Sprinklers, of rating 57 deg.C.
pendent with required accessories. (Make: TYCO/HD)
4
175
Nos.
Nos.
Photoluminaction Autoglow Signages. : Fire Hydrant 4” X 12”
5
Nos.
Fire Hose Reel.4” X 12”
" DCP" Extinguisher 8"x 4"
"CO2 " Extinguisher 8"X 4"
Floors 8"X 4"
Charges for design, drawing, fire NOC & Liasoning for Fire
protection system.
5
5
5
4
1
Nos.
Nos.
Nos.
Nos.
Job.
165
LANDSCAPING WORK : Providing good Garden &
Planteing soil(kamp) of approved quality on site
120
Brass
166
Providing Farm Yard Manure of approved quality on
site(3” of FYM)
Labour for spreading & Mixing soil manure evenly
over excavated area
Plantation Works : Trees plantation works :
Providing and planting the specified foliage tree of
size 4’to 6’ including excavation of pit size 3’x3’x3’
and refilling of pit with sweet earth, manure and
plantation
as
directed
by
Engineer
in
charge/consultant. Coconut Palm(Nariyali) 21"
Melia Azardirachta(Bakam Limda)
Kingelia Pinnata 78'
Samanea Saman(Rain tree) 7'-8'
Cordia sebestena 7'-8'
Thespesia Popilnea(Paras piplo) 6'-7'
Causarina Equistefolia (Saru) 6'-7'
60
Brass
4500
Sq.ft.
40
No.
5
6
6
5
16
4
No.
No.
No.
No.
No.
No.
156a
156b
156c
156d
156e
157a
157b
158
159
160
161
162
163
167
167
168a
168b
168c
168d
168e
168f
168g
168h
168i
168j
168k
169a
Pongamia Pinnata(Kanji) 6'-7'
Ficus Benjamina 21*21 BAG
Cassia Fistula(Garmalo) 6'-7'
Cassia Siamea (Kasid) 7'-8'
Shrubs & Ground covers : Providing & planting the
Specified foliage shrubs & Ground covers of size 3’
to 4’ including excavation of pit size 2’x 2’x 2’ and
refilling of pit with sweet earth, manure & plantation
as directed by engineer in charge/ consultant.
Merium light pink
Punica Grantum(Phul Dadam)
Caesalpinia Pulcherima
Hibiscus Red(Lal Jasud)
Jatropha Flowering
Bauhinia Yellow
Ixora Hybrid Red
Hedges Plantation works : Providing & planting the
specified foliage hedges of size 1’ to1 ½ ‘ including
excavation of pit size 1’x1’x1’ and refilling of pit with
sweet earth, manure & plantation as directed by
engineer in charge/ consultant. Bamboo stick for
supporting of trees
4
3
2
9
107
No.
No.
No.
No.
No.
528
75
595
251
753
559
100
No.
No.
No.
No.
No.
No.
Nos.
171
ELECTRICAL WORK : MAIN PANEL, FEEDER PANEL &
DISTRIBUTION BOARD : Supply, installation, testing and
commissioning of panel as per specifications. 14/ 16 SWG
CR sheet Essar make fabricated, floor/wall mounting, Dust &
vermin proof, front operated, compartmentalised panel duly 7
tank pre treatment powder coating with siemens grey 70-80
microns. shade RAL 7032. busbar supporter, PVC sleeve,
hardware etc. 75x40x6 mm Base channel( APPROVED
SWITHGEAR : L&T / SCHNEIDER ) INCOMMER 200 A. FP
MCCB, LAMP INDICATORS, ENERGY MANAGER, COPPER
BUSBAR AND OUT GOING FEEDER AS UNDER
32 A. FP MCB-14 NO. 80A. FP MCCB -2 NOS. AS PER SLD
3
SET
172
21 NOS. OF 1 PAHSE METER PANEL INCOMMER 80 A. FP
MCCB,COPPER BUSBAR AND OUT GOING FEEDER AS
UNDER 16 A. DP MCB-21 NO. with kwh sub meter AS PER
SLD [ FOR SHOP PLAZA-2]
8 WAY SPN DOUBLE DOOR D.B. INCOMMER : 16A. DP
MCB-1
OUTGOING : 6A. SP 'B' MCB 3
NOS.
& 16A. SP 'C' MCB-2 NOS.[ for toilet Lighting ]
6 WAY TPN DOUBLE DOOR D.B. INCOMMER : 63A. elcb -1
with mcb Tpn
OUTGOING : 16A. SP 'B'
MCB - 4 NOS.10A. SP 'B' MCB - 7 NOS.
& 16A. SP 'C' MCB-2 NOS.[ for toilet Lighting ]
15
SET
31
SET
9
SET
169b
169c
169d
169e
169f
169g
170
173
174
175a
175b
175c
176a
176b
176c
177
178
179
180a
180b
180c
180d
L T CABLES : Supply,Laying, testing and commissioning of
following sizes of XLPE (IS:7098) ISI insulated Aluminium
conductor/copper conductor power/multicore control armoured
cable of 1.1 KV grade on roof, wall, or on cable tray with
clamps, cable tie,fixing hardware or directly buried in ground
etc
as
required.
( APPROVED MAKE : FINOLEX/POLYCAB) 4 C x 10 Sqmm
Alu. Arm. Cable ( for Garden Light, high mast & street
lights )
3.5 C x 25 Sqmm Alu. Arm. Cable ( for SHOP PLAZA 1 & 2
METER PANEL )
3.5 C x 120 sqmm Alu. Arm. Cable ( main cable )
Cables
&
End
Termination
: Supply and making end termination with brass Single
compression glands/PVC gland for the following XLPE/PVC
armoured/flexible 1100 V grade cable including cost of
crimping lugs/ferrules, cable sockets, insulation tape, M-seal
chemical. etc complete as per instruction of the engineer in
charge.(Approved make : Dowells/HMI) 4 C x 10 Sqmm
Alu. Arm. Cable
3.5 C x 25 Sqmm Alu. Arm. Cable
3.5 C x 120 sqmm Alu. Arm. Cable
Excavation and backfilling of cable trench 900 mm deep
complete with compacting surplus soil and making a good
finish level complete to the satisfaction of E.IC.
Supply and spreading of fine river sand in existing cable trench
minimum 100 mm badding etc. complete to the satisfaction of
E.I.C.
Supply and laying of Bricks on the cables for cable protection
complete to the satisfaction of E.I.C.
INTERNAL WIRING : Providing and making point wiring in
concealed in walls, furniture and for above false ceiling, or on
ceiling, on beams shall be fixed with saddles and spacers etc.,
with conduits taken in slab with 20/25 mm dia P.V.C. Rigid
conduits 1.5 mm thick [ Make precision / polycab / mihir ] ISI
mark with bends, tees, elbows etc., with 650/1100 V grade ISI
marked Finolex/Anchor FRLS copper conductor wires i.e. 2
Nos. of 1.5 sqmm & 1 no. of 1.o sqmm for earthing flexible
PVC insulated copper conductor wires all accessories screws
and washers Opal Clipsal / Anchor Woods / Crabtree athena
switches with its modular cover plate, switches, fan regulators,
6/16 amp sockets, flush metal box or surface PVC box or flush
PVC box for truncking system etc. of company made and outlet
boxes of 18 SWG G.I., its accessories, angle holder / batten
holder / ceiling rose, etc., electrical point to be complete in all
respect to the satisfaction of E.I.C. One 6A switch controlling
one light point
200
Mtr.
125
Mtr.
75
430
Mtr.
Nos.
Ceilling mount fan with eme step type fan regulator point.
6A socket outlet (5 pin) with 6A SP switch
(on common
board).
6A socket outlet (5 pin) with 6A SP switch (as an independent
point)
10
Nos.
10
Nos.
450 Cu.mtr.
10 Cu.mtr.
530
Nos.
115
Nos.
18
41
Nos.
Nos.
29
Nos.
6/16A ( 6 pin) switch socket with flush metal company made
box with front modular cover plate (Without wiring - it will be
included in circuit mains).
Supply, installing, testing & comm. of telephone point with
Telephone socket outlets of RJ 11 of Approved make with
concealed/surface boxes in walls / furniture’s etc complete all
respect to the satisfaction of E.I.C (without wiring)
27
Nos.
14
Nos.
180g
Supply, installing, testing & comm. of television point with
Television socket outlets of
Approved make with
concealed/surface boxes in walls / furniture’s etc complete all
respect to the satisfaction of E.I.C (without wiring)
49
Nos.
181a
CIRCUIT MAINS : Providing, installing, testing, commissioning
of CIRCUIT MAINS of following sizes PVC insulated copper
conductor multi-stranded flexible type wires with 20 / 25mm dia
P.V.C. Rigid conduits 1.5 mm thick ISI mark of above specified
make with following size of wires. (Approved make for wires :
Finolex/Anchor FRLS ) (REQUIRED
1482
Mtr.
181b
2 nos. of 2.5 sq mm and 1 no. of 1.0 sq mm (for earthing)
wires (DB TO SB & SB TO SB LOOP as per SLD).
1230
Mtr.
181c
2 nos. of 4.0 sq mm and 1 no. of 2.5 sq mm (for earthing )
wires (Meter to DB as per SLD)
2 Pair tel. main line [ Point to tel. crone box. ]
LIGHT FIXTURE & POLE : LIGHT FIXTURES Supply,
installation, excavation,foundation,testing and commissioning
of Light fixtures/ceiling fans/exhaust fans etc. incl. flexible
cords, ball sockets, hanging chain,down rods,control gear,
lamp complete as per instruction of the engineer in charge.
Decker Mast 9.75 mt height is an integrated outdoor lighting
system with swaged pole and a specially designed double ring
bracket suitable for mounting six flood lighting luminaires. The
luminaires are wide spread directional flood light and can be
rotated on its own axis and can be tilted for aiming at different
angles. The GI pole is provided with a foundation base plate
and the bracket assembly is secured on to the pole top by
means of 2 annular rings with allen grub screws. The swaged
pole with bracket, built-in cylindrical GI control box with service
door is coated with epoxy zinc phosphate primer and finished
with polyurethane based paint. The control gear tray is prewired
with MCB, terminal connectors for loop-in loop-out and suitable
for operation on 240V, 50Hz single phase ac supply.
565
Mtr.
270
1
Mtr.
Nos.
180e
180f
181d
182a
182b
SITC of Asymmetric Flood Light luminaire, rectangular model,
integral type, suitable for single 250W MH Tubular lamp
[supplied with super imposed ignitor], housing made of die-cast
aluminium of low copper content to offer high corrosion
resistance, optical system with aluminium reflector covered with
heat resistant toughened glass held in position by spring loaded
latches, continuous rubber gasket to ensure adequate sealing
against ingress of moisture, dust, insects etc., mounting
bracket with tilting feature to facilitate proper aiming of the
luminaire, prewired with control gear, suitable for operation on
240V, 50Hz single phase ac supply
6
Nos.
182c
SITC of Satellite Glider ID6666 integral type outdoor luminaire
IP65 protected, suitable for 70W MH G12 base Lamp,
luminaire aesthetically contoured with a reflector, for better
reflection, made of aluminium sheet and supported to the base
through stainless steel brackets, bracket the lamp along with
the control gear and super imposed ignitor housed inside and
covered with a toughened glass clear diffuser at the top portion
of the satellite tube 100 mm dia extruded aluminium and the
bottom portion attached to a mounting base with a HIP
decorative covering hood and suitable for operation on 240V,
50Hz single phase ac supply
20
Nos.
182d
SITC of K-lite make Ganthal ID 6062, suitable for single 70W
MH G12 base lamp [supplied with super imposed ignitor],
mounting on to 76mm dia pole, die cast aluminium spigot base
with aluminium alloy of low copper content, IP 65 powder coat,
clear diffuser, prewired with control gear and suitable for
operation on 240V, 50Hz single phase ac supply. with K-lite
make MC4278 3mt pole of 114 GI tube integra control box .the
pole is coated with epoxy zinc phospate and PU finished with
suface mounted plate and loop in loop out system.
30
Nos.
182e
SITC of Light House Midi model, outdoor type, environmental
friendly, decorative, IP65 integral, suitable for single 70W MH
lamp, mounting on to 60 mm dia pole ID MC4282 3.6mt height
made out of GI with ingeral Control box having loop in loop out
system P.U painted processed with zinc phospate promere.,the
fixture have die cast aluminium spigot base with aluminium
alloy of low copper content for effective corrosion resistance,
spun aluminium top cover with circular polycarbonate capping
spacer with ventilating knob, luminaire finished with powder
coat, translucent perspex diffuser, UV stabilized to avoid
yellowing effect, prewired with control gear with super imposed
ignitor, and suitable for operation on 240V, 50Hz single phase
ac supply.
4
Nos.
182f
SITC of Light House Midi model, outdoor type, environmental
friendly, decorative, IP65 integral, suitable for single 70W MH
lamp, mounting on to 60 mm dia pole ID MC4282 3.6mt height
made out of GI with ingeral Control box having loop in loop out
system P.U painted processed with zinc phospate promere.,the
fixture have die cast aluminium spigot base with aluminium
alloy of low copper content for effective corrosion resistance,
spun aluminium top cover with circular polycarbonate capping
spacer with ventilating knob, luminaire finished with powder
coat, translucent perspex diffuser, UV stabilized to avoid
yellowing effect, prewired with control gear with super imposed
ignitor, and suitable for operation on 240V, 50Hz single phase
ac supply.
6
Nos.
182g
SITC of Light House Midi model, outdoor type, environmental
friendly, decorative, IP65 integral, suitable for single 70W MH
lamp, mounting on to 60 mm dia pole ID MC4282 3.6mt height
made out of GI with ingeral Control box having loop in loop out
system P.U painted processed with zinc phospate promere.,the
fixture have die cast aluminium spigot base with aluminium
alloy of low copper content for effective corrosion resistance,
spun aluminium top cover with circular polycarbonate capping
spacer with ventilating knob, luminaire finished with powder
coat, translucent perspex diffuser, UV stabilized to avoid
yellowing effect, prewired with control gear with super imposed
ignitor, and suitable for operation on 240V, 50Hz single phase
ac supply.
8
Nos.
182h
SITC of Light House Midi model, outdoor type, environmental
friendly, decorative, IP65 integral, suitable for single 70W MH
lamp, mounting on to 60 mm dia Empire single arm bracket
pole ID MC 4476 4 mt height made out of GI with ingeral
Control box having loop in loop out system P.U painted
processed with zinc phospate promere.,the fixture have die
cast aluminium spigot base with aluminium alloy of low copper
content for effective corrosion resistance, spun aluminium top
cover with circular polycarbonate capping spacer with
ventilating knob, luminaire finished with powder coat,
translucent perspex diffuser, UV stabilized to avoid yellowing
effect, prewired with control gear with super imposed ignitor,
and suitable for operation on 240V, 50Hz single phase ac
supply.
16
Nos.
182i
SITC of K-lite make ID 7886 for ENTRY /EXIT Side mounting
type indoor vinyl signage in colour background, double side
legend, LED luminaire with battery back up, prewired and
suitable for operation on 240V, 50Hz single phase ac supply.
5
Nos.
182j
SITC of K-lite ID 1648 Fluorescent light fitting, cute in
appearance with coloured attractive moulded plastic end
covers, suitable for 1 x 28W T5 fluorescent lamp. The
luminaire frame is made out of heavy gauge, either pre coated
sheets or CRCA sheet steel. When the sheet is of non coated
variety, it is effectively anti-rust treated, and powder coated for
high reflection. The luminaire is prewired with 28W electronic
ballast, rotor type, bipin spring loaded push fit type holders, and
with moulded plastic end covers. The luminaire is ready for
installation on 240V, 50 Hz single phase ac supply.
631
Nos.
182k
SITC of K-lite make ID 7879 for ENTRY /EXIT Side mounting
type indoor vinyl signage in colour background, single side
legend, LED luminaire with battery back up, prewired and
suitable for operation on 240V, 50Hz single phase ac supply.
15
Nos.
182l
SITC of Pelican Orna MC 4732-A 4mt. Lighting pole is a
combination of Colombia pole, single arm decprative bracket
suitable for mounting pendent luminaire pelican fort ID 6279
made out of spun alumium body intgrated with super imposed
ignitor and 70w copper wonded ballast for G-12 base . Pole is
a decorative tubular pole, made of 60 mm dia GI tube, integral
with built-in cylindrical GI control box, service door and a
circular base plate. The single arm Pelican bracket is fabricated
with GI tube and held on to 60 mm tube with spacers. The pole
is swaged at the top to accommodate the bracket assembly,
sinage of required size secured on to the top by means of 2
annular rings with allen grub screws, sinage of appropriate size
can be customised. The pole and the bracket are coated with
epoxy zinc phosphate primer and finished with polyurethane
based paint. The control gear tray is prewired with MCB,
terminal connectors for loop-in loop-out and suitable for
operation on 240V, 50Hz single phase ac supply.
16
Nos.
182m
SITC of French street light pole ID MC 8255 is a surface
mounting, swaged decorative street light pole with a single arm
decorative bracket suitable for mounting hanging type K-lite
Make Honey drop ID 6227 Or Pelican fort ID 6266 made out of
alumium dai cast/spun , integra control gear suitable for 150 w
MH with super imposed ignitor IP 65 type decorative street
light (thread of designation FP-1). The GI pole is provided with
a foundation base plate and the bracket assembly is secured
on to the pole top by means of 2 annular rings with allen grub
screws. The swaged pole with bracket, built-in cylindrical GI
control box with service door is coated with epoxy zinc
phosphate primer and finished with polyurethane based paint.
The control gear tray is prewired with MCB, terminal
connectors for loop-in loop-out and suitable for operation on
240V, 50Hz single phase ac supply.
11
Nos.
182n
SITC of Flood Light luminaire, rectangular model, integrated
with 30W LED module, housing made of die-cast aluminium,
optical system covered with heat resistant toughened glass,
mounting bracket and a graduated disc to facilitate proper
aiming of the luminaire at desired angle, prewired with driver,
suitable for operation on 240V, 50Hz single phase ac supply.
2
Nos.
182o
SITC of Fixture VOLTA upto 65W CFL / E-27 [ GL-PT-VOLTAxxx-R065 ] with 3 mtr. Pole. Glowmac , K-lite or equiv.
95
Nos.
182p
Supply & Installation charges for ceilling fan 48" Crompton /
Orient make [ for shop & Toilet area ]
Supply & Installation charges for 400 mm EX-FAN ( CG / orient
) [ for Toilet Block ]
EARTHING SYSTEM : Supply, installation, testing and
commissioning of earthing stations making earth pits with Hot
dip G.I. plate electrode of 600 mm x 600 mm x 6.3 mm thick,
40x6mm G.I. strip including 38mm dia. B-class funnel pipe,
char-coal, salt, including excavation of earth pit,back filling,
Providing masonry enclosure with C.I. cover having locking
arrangement , disconnecting/ testing links etc as per IS –3043
complete as per directions of Engineer-in-charge
6
Nos.
57
Nos.
17
Nos.
182q
183
Total Amount
AT PORBANDAR DIST. PORBANDAR
RATE
AMOUNT

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project