STEP 13 - Acuity Brands

WIN NA
®
solutions
forms
WIN NA
®
light
solutions
SPECIFICATIONS
®
WIN NA
solutions
forms
®
forms
light
WIN NA
STEP 13
Project:
6-LONG
Qty:
forms
light
8.50"
WIN NA
5.50"
solutions
Exposed fasteners for
Wet Location Only
forms
GREY CMYK:
C-0
M-0
Y-0
K - 50
Construction
BLACK
CMYK:
WHITE CMYK:
C - 0 Die-cast housing
C - 0 with solid aluminum, brass, or
M-0
M-0
Step13-6 is a surface mount
Y - 0 stainless steel
Y -faceplate.
0
K - 100
0
step light thatK -mounts
over a Steel City 2-1/8” deep,
GREEN RGB:
GREY RGB:
R - 147
G - 149
B - 152
BLACK RGB:
WHITE RGB:
Interior optionR -faceplate
R - 35
255
G - 31
G - 255
fasteners.
B - 32
B - 255
- 109 with
LED Rmodule
G - 157 optic
concealed
Ribbed design
withlight
matte
black finish
reduces glare
B - 49
Integral
driver
WIN NA
solutions
GREEN CMYK:
C - 50
M-0
Y - 100
K - 25
2.125" box min.
®
forms
color
Accepted color combinations
®
solutions
light
Type:
light
WIN NA
solutions
forms
STEP
rectangular box 4G4D or equivalent (by others).
mounts with no visible
Source
Light source consists of four powerful LEDs available
in five white color temperatures & six colored LED
choices.
CROSS SECTION
®
light
18"
Optics
A concealed optic provides a long light distribution for
illumination of large areas.
L
Approx
10'-0"
Steel City 4G4D
or equivalent
(by others)
Typical Distribution Based on WHT30K
Grid in 1' increments
Electrical
Integral electronic drivers are multi volt input 120277V, and available in standard or 0-10V dimming.
Non-dimming units consume 5.53W. Dimming units
consume 12W.
0.1
0.5
1.0
2.0
4.0
8.0
Ribbed design
with matte black finish
reduces glare
Finish
Recessed surfaces have a ribbed design with matte
black finish to reduce glare. Faceplates are available
in five metal finishes with protective clear coat or one
of seven polyester powder coat painted finishes. A
primer only finish is also available for field painting.
Warranty
5-year limited warranty. Complete warranty
terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user
environment and application.
All values are design or typical values, measured
under laboratory conditions at 25 °C.
Assembled in America (Buy American Act Compliant)
Performance Data
Size
Dist.
Lumens
Watts
LPW
6LONG
Long
202
5.53
36.5
Performance data based on WHT30K non dimming.
Environment
ETL / cETL listed dry location or optional wet location.
6 inch - Long Distribution
See page 3 for lighting facts labels.
CATALOG NUMBER
Example: STEP13 INT 6LONG L LST2A WHT30K MVOLT BA
Series
STEP13
Environment
WL
INT
Step 13
Voltage
Wet Location
Interior
Driver
MVOLT Multi Volt 120V thru 277V
(Blank) Standard Driver
DMD
Dimming Driver
Length
Distribution
6LONG 6 inch nominal length
L
Source
Color Temperature
LST2A LED Step 2
Long
WHT27K
WHT30K
WHT35K
WHT40K
WHT50K
AMB
Finish
BA
BB
BSS
PB
PSS
BLU
GRN
RED
CYN
RDO
White (27K)
White (30K)
White (35K)
White (40K)
White (50K)
Amber
Blue
Green
Red
Cyan
Red-Orange
Special
Brushed Aluminum
Brushed Brass
Brushed Stainless Steel
Polished Brass
Polished Stainless Steel
ABP
BBP
LBPS
LSP
PGP
Antique Brass Paint
Brushed Brass Paint
Light Bronze Paint Smooth
Light Silver
Pale Gold
Describe Modification:
SGB
SGW
PRM
CPF*
CMF*
Semi Gloss Black
Semi Gloss White
Primer Only
Custom Paint Finish
Custom Metal Finish
MOD* Modification / Consult Factory
Notes
• *Available by modification only. Consult factory.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/23/15
STEP13_6LONG
1
WIN NA
®
solutions
forms
WIN NA
®
light
solutions
SPECIFICATIONS
®
forms
STEP
WIN NA
light
Type:
STEP13
solutions
forms
light
Project:
6-LONG
WIN
NA
®
solutions
forms
Qty:
light
WIRING & DIMMING
color
Accepted color combinations
POWER SUPPLY / DIMMING ®
Dimming drivers require a 0-10V fluorescent-type dimming
control.GREY CMYK: BLACK CMYK:
GREEN CMYK:
WIN NA
solutions
forms
light
C - 50
M-0
Y - 100
K - 25
C-0
M-0
Y-0
K - 50
C-0
M-0
Y-0
K - 100
WHITE CMYK:
C-0
M-0
Y-0
K-0
GREEN RGB:
R - 109
G - 157
B - 49
GREY RGB:
R - 147
G - 149
B - 152
BLACK RGB:
R - 35
G - 31
B - 32
WHITE RGB:
R - 255
G - 255
B - 255
Read all instructions before installation. Do not make live connections!
WIN NA
®
NON-DIMMING INSTALLATIONS
solutions forms light
Connect
STEP WHITE wire to power NEUTRAL.
Connect STEP BLACK wire to power HOT.
®
Connect STEP GREEN wire to power GROUND.
WIN NA
light
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
To other
STEP
fixtures
WHITE
BLACK
GREEN
forms
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
or
277V
WHITE
BLACK
GREEN
solutions
120V
DIMMING INSTALLATIONS
The integral dimming driver is designed to the 0-10V IEC dimming specification 60929 and is compatible with common 0-10V dimmers and dimming systems.
Do NOT connect line voltage to dimming input wires.
Connect STEP WHITE wire to power NEUTRAL.
Connect STEP BLACK wire to power HOT.
Connect STEP VIOLET wire to POSITIVE INPUT of Dimming Control.
Connect STEP GREY wire to NEGATIVE INPUT of Dimming Control.
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
VIOLET
GREY
VIOLET
GREY
VIOLET
GREY
To other
STEP
fixtures
VIOLET
GREY
VIOLET
GREY
VIOLET
GREY
0-10V (+)
Dimmer (-)
To other
STEP
fixtures
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
120V
or
277V
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/23/15
STEP13_6LONG
2
WIN NA
®
solutions
forms
light
SPECIFICATIONS
®
WIN NA
WIN NA
®
solutions
forms
STEP
light
Type:
STEP13
solutions
forms
light
Project:
6-LONG
WIN
NA
®
solutions
forms
Qty:
light
LIGHTING FACTS
WIN NA
color
Accepted color combinations
®
solutions
forms
light
WIN NA
GREEN CMYK:
C - 50
M-0
Y - 100
K - 25
GREY CMYK:
C-0
M-0
Y-0
K - 50
BLACK CMYK:
C-0
M-0
Y-0
K - 100
WHITE CMYK:
C-0
M-0
Y-0
K-0
GREEN RGB:
R - 109
G - 157
B - 49
GREY RGB:
R - 147
G - 149
B - 152
BLACK RGB:
R - 35
G - 31
B - 32
WHITE RGB:
R - 255
G - 255
B - 255
®
solutions
forms
light
WIN NA
®
solutions
forms
light
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/23/15
STEP13_6LONG
3