WSM Ordering Information WSM 13” Wallpack

WSM 13” Wallpack
HOUSING / LENS / OPTICS The bronze die-cast
aluminum housing, thick prismatic glass refractor and
stainless steel hardware together make the WSM Series
resistant to weather and vandalism. Both the door and
prismatic glass lens utilize weatherproof silicone gasketing
to seal out contaminants.
50 - 150W
LAMPS /GENERATOR/BALLAST The WSM Series
comes standard with a medium base HID lamp. Induction
lamp is a tubular rectangular induction system mounted to
a heavy duty heat sink bracket for efficient cooling.
Lamp Included
Designed for 12 to 18 foot mounting heights, the
WSM Wallpack efficiently lights walkways, building
exteriors, loading docks, bridges and most security
areas with a wide light distribution.
40°C Ambient Rated
Listed for Wet Locations
Consult Factory for cUL Availability
The 50-150W pulse start metal halide fixtures utilize
a multi-tap high reactance ballast. HPS fixtures can be
ordered with a 120V NPF reactor ballast or a multi-tap
high reactance HPF ballast. 120V reactor ballasts can be
ordered with optional HPF. 150W high pressure sodium
fixtures are also available with 480V ballasts. Induction
electronic generator/ballast is 120- 277VAC, 50/60 Hz.
ACCESS / WIRING The side-hinged door opens easily
using two captive stainless steel screws to provide easy
access to internal components. Wiring options include
mounting over a 4” recessed junction box or surface
mounting using convenient conduit entries located on side
and bottom of fixture. Additional knockouts are provided
for optional photocell.
MOUNTING OPTIONS The recommended wall
mounting height is 12’ to 18’.
PHOTOMETRIC DATA
175W PSMH Wallpack at 15’ mounting height.
(Isofootcandle Plots)
60'
40'
20'
0
20'
40'
60'
60
40
20
0
10
3
20
7
1
.5
.3
40
60
.1
WSM Ordering Information
SERIES
WSM
MOUNTING
0 = Wall
LIGHT SOURCE
1 = Induction
3 = CFL
5 = HPS
8 = PSMH (Enclosed Rated)
LAMP WATTAGE
04 = 40W Induction
05 = 50W HPS, PSMH
07 = 70W HPS, PSMH
10 = 100W HPS, PSMH
15 = 150W HPS
26 = 26W CFL
32 = 32W CFL
42 = 42W CFL
52 = (2) 26W CFL
64 = (2) 32W CFL
84 = (2) 42W CFL
VOLTAGE
OPTIONS
1NPF = 120V Normal Power Factor (HPS only)
WT = White Housing
1HPF = 120V High Power Factor (HPS only)
BK = Black Housing
M = 4-Tap, HPS/PSMH (50W, 70W, 150W)
B = Button Photocell (Designate voltage)
(120, 208, 240, 277VAC 60Hz, Tapped @ 277)
5 = 480V (150W HPS only)
M5 = 5-Tap (120, 208, 240, 277, 480V 60Hz, Tapped
@ 480V)
D = Dual Tap 120V/277V (CFL & 100W PS only)
U = 120-277V 50/60Hz
Photocell Option (Designate voltage):
1 = 120V (with M, U, or D ballasts)
2 = 277V (with M, U, or D ballasts)
3 = 208V (with M, U, or D ballasts)
4 = 240V (with M, U, or D ballasts)
ACCESSORIES
WGM = Wire Guard
PGM = Polycarbonate Guard (vandal shield)
WSM–TS = Tamperproof Screws
WSM–TSD = Tamperproof Screws & screwdriver
Glare Shields
WSM–GS = Side Cutoffs
WSM–GSF = Full Cutoff
13”
7.5”
9”
Approx. ship weight 15 lbs.
212 Outdoor
SPECIFICATIONS SUBJECT TO CHANGE.
800 523-3602
www.simkar.com