HALO DESCRIPTION A series of understated, balanced luminaires. The Stasis family of luminaires feature die-cast and extruded bodies with elegant free flowing lines. Ideal for accent and display lighting applications. This Stasis LED Large luminaire is perfect for those applications where performance is required from a discreet source. Catalog # Type Project Date Comments Prepared by SPECIFICATION FEATURES Quick-Lock Adapter* Heat Sink Labels Attaches electrically and mechanically anywhere along track. Includes discreet locking tab that locks luminaire on track and allows for easy removal and repositioning. Two position conductor allows use in single circuit and either circuit of two circuit track. Aluminum die-cast heat sink provides exceptional thermal management to yield 70% lumen maintenance after 50,000 hours of operation. UL/c-UL Listed for use with Halo Architectural Power-Trac and Lazer Track. UL/c-UL classified for use with Juno 1, Lightolier 2 and Global TEK/HTEK 3 Track. Luminaire Arm Warranty Arm allows the housing tilt to adjust +/-90°. It also pivots +/-90° around the ballast housing. This enables the ballast housing to remain static on the track creating a clean look, while providing full aiming capabilities. The arm employs graduations every 15° for precise and repeatable tilt aiming. Indicator mark on the bottom ensures perfect luminaire housing alignment with track. Subject to all of the limitations set forth in Cooper Lighting’s Terms and Conditions of Sale, for HALO TRACK LED products, the limited warranty set forth shall have a period of 5 years from the date of shipment of products. Lockable Aiming Luminaire tilt and rotation can be locked in place easily with the included 0.5mm allen wrench. Switch On/off switch allows power to be turned off during installation on individual luminaires. Optics Optical distributions are field changeable and designed with patented IMS optics. Ships with Solite lens installed. Driver Housing Die-cast and extruded aluminum housing incorporates the lamp control circuit. LED Light Engine Equipped with (16) 3 Watt white LEDs. Factory configurable optics allow for 3 optical distributions. High CRI of 85 with excellent color consistency of +/-50˚K color temperature. Dimming The Stasis LED LRG WW (18W) is dimmable down to 15% with electronic low voltage equipment (ELV dimmers need a neutral connection in the wall box.) The Stasis LED LRG WW HO (38W) is dimmable down to 5% using triac dimmers. 5-13/16" [148mm] 4-13/16" [122mm] 3-1/4" [82mm] L805LRG Stasis LED Wall Wash High Output 3000KCBCP Spot 15˚ 27741 Narrow Flood 25˚ 12898 Flood 37˚ 5669 4000K Multiplier= 1.25 2-3/8" [60mm] 6-13/16" [173mm] Lighting Data 3000K Spot Lumens:2399 Lumens per watt: 64.1 Energy Data: High Output Input Power: 38W Power Factor: >0.90 Input Current: 0.4 Amps *Note: Fixture to only be attached to horizontally installed track systems. TD518044EN 8/18/2016 L805LRG Wall Wash O R DER I N G I N F O R M A T I O N SAMPLE NUMBER: L805LRGWW830AHHO (Halo or Lazer Track connector, Wall Wash, 85 CRI, 3000K, Aluminum Haze Finish, High Output 38W) Track LED Size Beam CRI CCT Finish Voltage Wattage L=Halo and Lazer PowerTrac LJ=Juno® Track 1 LL=Lightolier® Track 2 L2G=Global® TEK or HTEK 3 805=805 LRG=Large WW=Wall Wash 8=85 30=3000K 40=4000K AH=Aluminum Haze MB=Black P=White [Blank]=120V 277=277 VAC (Only with HTEK) [Blank]=18W HO=High Output 38W Accessories (order separately) L850=Solite Lens Kit L8SP=15° Spot Optic Kit L8NF=25° Narrow Flood Optic Kit L8FL=37° Flood Optic Kit L827=2700K Lens Kit NOTES: 1. Juno® T single circuit and 2-circuit track contact. Juno® is a registered trademark of Juno® Lighting. 2. Lightolier® Lyfespan 6000 single circuit and 2 circuit track contact. Lightolier® is a registered trademark of Philips Lighting. 3. Global® is a registered trademark of Nordic Aluminum. DesignLights™ Consortium Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details. P H O T O M E T R I C S Wall Wash High Output Wall Wash Lumens: 2,052 LPW: 55.5 Single Fixture 3' From Wall Distance From Fixture Along Wall DD012 345 1 936735 12 2 1 2 835732 14 3 2 3 533924 12 3 2 4 32 25 17 10 4 2 5 191612 8 4 3 612108 633 7776 532 8554 442 9433 322 10332 222 Multiple Fixtures 3' From Wall Spacing Between Fixtures DD45 6 1 10072100 9542 95 94 2394 2 936593 8744 87 85 2885 3 644964 5736 57 55 2555 4 433643 3728 37 34 2134 5 292629 2421 24 22 1722 6 21 19 21 17 15 17 15 13 15 7 151415 1212 12 11 1011 811 1111 99 9 8 88 9 999 77 7 6 66 10777 66 6 5 55 Notes •Illuminance values for multiple fixtures are based upon the center two units of a four unit array. Footcandle values are center line of fixtures and centered between fixtures. 1 footcandle = 10.76 lux. 1 foot(') = 304.8mm. •Illuminance values are cosine corrected initial value with no contribution from inter reflections from other room surfaces. Total illumination may increase from contributions from other surfaces. •Changing fixture spacing will affect illuminance level. Existing Spacing x Average Table Fc Level New Spacing •39W Multiplier = .5 Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice.