EMBEDDED SOLUTIONS
NVIDIA QUADRO M5000 SE
AND M3000 SE
®
®
Quadro Performance and Features
in an MXM 3.1 Form Factor. Designed,
Built and Tested by NVIDIA.
The NVIDIA Quadro M5000 SE and M3000 SE MXM
interface modules offer the same Quadro performance,
features, SDK and API support, exacting build standards,
rigorous quality assurance, and broad ISV application
compatibility, as desktop PCIe based Quadro products.
Designed for the needs of embedded, ruggedized, or
mobile system builders, these products make Quadro
graphics and compute capabilities available to form
factors unsuited for traditional PCI Express expansion
cards, tolerate wide-ranging thermal and environmental
conditions, are ideal for blade or other deployments where
high GPU density is an important consideration, offer
generous GPU memory capacity, extremely reasonable
power requirements, and provide flexible display output
options.
Whether you’re developing revolutionary products ranging
from advanced medical imaging to sophisticated signal
processing, or breakthrough machine/deep learning
technology, or mission-critical defense systems, Quadro
gives you the ability to expand the boundaries of the
possible.
THE PNY ADVANTAGE
PNY provides unsurpassed service and commitment to its
embedded and OEM graphics customers, including
extensive pre-sales developmental and technical
consulting by dedicated Quadro Field Application
Engineers, access to specialized documentation required
for systems integration (e.g. Thermal Design Guides), bug
reporting, product lifecycle management information, and
much more.
For additional information or other product inquiries email
gopny@pny.com.
MODULE FEATURES
> MXM 3.1 Type B form factor (82
mm x 105 mm)
> MXM v 3.1 connector
> GM204 Quadro GPU
> 256-bit memory interface
> 8GB GDDR5 (M5000 SE)
> 4GB GDDR5 (M3000 SE)
> 4 Mb Serial ROM
> UEFI support
> PCI Express Gen 3 with lane
and polarity reversal support
> DisplayPort, HDMI, DVI SL or
DL, VGA outputs available
> 100 W power cap (M5000 SE)
> 75 W power cap (M3000 SE)
PNY PART NUMBER
QM5000SE-KIT
QM3000SE-KIT
Graphics APIs
Shader Model 5.1,
OpenGL 4.54,
DirectX 12.05,
Vulkan 1.04
Compute APIs
CUDA, DirectCompute,
OpenCL™
ENVIRONMENTAL
> Operating temperature range
of 0 °C to 55 °C
> Storage temperature -40 °C to
125 °C
> Operating RH 5% to 90%
> Storage RH 5% to 95%
> MTBF (controlled and
uncontrolled) available under
binding NDA
QUADRO M5000 SE
WARRANTY AND SUPPORT
>> 3-year warranty
>> Pre- and post-sales technical
support
>> Dedicated Quadro Field
Application Engineers
>> U.S. based direct Quadro
technical support hot line
QUADRO M3000 SE
PNY Technologies, Inc.
100 Jefferson Road, Parsippany, NJ 07054
Tel 408 567 5500 | Fax 408 855 0680
For more information visit: www.pny.com/quadro