A. Features B . Operational Manual

LIGHT(A
K ey)
ey)
(D Key)
Key)
START
LMODE(B
Key)
Key)
(C Key)
Key)
RESET
A. Features
12 digits LCD screen displays hour, minute, second, month, date and week.
Daily Alarm and Hourly Time Signal.
Snooze
12-hour / 24-hour format selectable.
1/100 second stopwatch with split functions.
EL backlight.
B . Operational Manual
B Key
B Key
Timekeeping Mode
Stopwatch Mode
B Key
Alarm Mode
Time Setting Mode
1. In any mode, EL will illuminates for 3 seconds by pressing A key, press B key to select
operation mode.
2. Stopwatch mode
The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds, when reaches its limit (23
hours, 59 minutes, 59.99 seconds), the stopwatch will automatically re-start to count from zero.
When stopwatch is more than 59 minutes 59.99 seconds, it will display from 1 hour to 23 hours at
“date” position.
To measure times with stopwatch: In stopwatch mode, press D key once to start counting, then press
D key again to stop counting. When it stops, seconds clear to zero by pressing C key.
To measure times with split time: In stopwatch mode, press D key to start counting, and press C key to
enter split time. along with“
”indicator flash to display on the screen, and press D
button to stop counting, press C button to display all times of stopwatch, then stopwatch resets to zero
by pressing C button.
In stopwatch mode, press D key to start counting, and press C key to enter split time. along with
“
”indicator flash to display on the screen, then press C key again to exit SPL, and
press D button to stop counting, then stopwatch resets to zero by pressing C button.
When stopwatch is running, press B key three times to return to time display mode, it will continue to
run in the background.
When at the state of split time, press B key to exit from split time, the stopwatch will continue to run in
the background.
3. Alarm mode
To turn on / off Daily Alarm and Hourly Time Signal: In alarm mode (“Hour” or “Minutes” not
flash ), press D key to turn on / off Alarm (
)and Hourly Time Signal(
)in sequence.
To set alarm time: In alarm mode, press C key , “Hours” starts flashing, press D key to adjust hours ,
then press C key again, “Minutes” starts flashing, and press D key to adjust minutes, press C key again
to exit from setting.
When alarm time is reached, alarm tone will sound with BB-BB for 20 seconds, alarm indicator (
)
will be flashing, press A, C, D to stop alarm tone after it starts to sound.
Snooze function: When alarm tone sounds, press B key to turn on snooze function, at this time, alarm
tone will sounds for 20 seconds in five minutes. Press A, C, D key to stop it.
4. Time setting mode
In time setting mode, “Seconds” starts flashing, which indicates time setting screen, press D key to
adjust “ seconds” to zero, press C key to adjust setting items (flashing) in sequence as below:
Seconds
Hours
Minutes
Month
Date
Week
When related setting item is flashing, press D key to adjust, and press B key to exit from setting.
When adjust “Hours”, it is 12-hour format if “A” or “P” indicator appears on the screen by pressing D
key, while it is 24-hour format if “H” appears on the screen.
When adjust the “Seconds”,
Minutes will be increased by 1 automatically if seconds is in the range of
30 to 59, while minutes without changing if seconds in the range of 0 to 29.