Splice Enclosure Selection Guide

Splice Enclosure Selection Guide
Why Choose Multilink Enclosures?
•
•
•
•
•
•
•
Designs available for all applications
o Clam Shell
o Dome
o Small form factor
Shipped complete with EVERYTHING needed including one splice tray.
That means one part number does it all for most applications.
Unique grommet sealing system allows repeated entrances and closings
with NO heat, adhesives, mastics or powered tools.
Designed to support loose tube, central tube, and other fiber cable and
drop designs.
Tested and designed to meet Telecordia GR-771, RUS and IEC
requirements.
Lifetime guarantee
Cost effective
Starfighter 4000-D Dome 192 Single Fiber / 384 Mass
•
•
•
•
•
•
•
•
Designed for above or below grade installation and supports up to 6 or
more cable entries.
Split End Plate System allows mid –accessing of cable up to 1.125” dia.
Completely sealed end gasket, and “Onion Peel”
central cable seal makes installation a breeze
Multi-port grommet for feeder & distribution cable
Integrated slack storage and hinged trays allow
ample storage and easy access to all fibers
Integrated “F” pressure testing valve
and ground lugs
Equipped with all parts for normal splicing
10”D x 22”L,
Starfighter 4048-D Dome 96 Single Fiber / 192 Mass
•
•
•
•
Little brother to 4000-D Dome. All the same great features in a smaller
package
Designed for above or below grade installation and supports up to 6 or
more cable entries.
Split End Plate System allows mid –accessing of cable up to 1.125” dia.
10”D x 22”L,
ƒ Needs final info
Starfighter 1120-F MiniButt 24 Single Fiber / 48 Mass
•
•
•
•
•
•
•
•
•
Designed for low count splicing in areas where space is a constraint.
Integrated gasket to prevent ingress of water but allow ease of access
Supports butt and inline configurations
Up to 4 cable entries with cable OD 0.3” to 0.63”
Suitable for above or below grade installation
Integrated “F” pressure testing valve
and ground lugs
Up to 24 single fusion or 48 mass fibers
Equipped with all parts for normal splicing
15”L x 6.5”W x 3”D, 6 lbs
Starfighter 2000-F 72 Single Fiber / 144 Mass
•
•
•
•
•
•
•
•
Designed for medium capacity splicing
Integrated gasket to prevent ingress of water while allowing ease of entry.
Supports butt and inline configurations
Up to 4 cable entries with cable OD 0.3” to 0.63”
Suitable for above or below grade installation.
Integrated “F” pressure testing valve and
ground lugs
Equipped with all parts for normal splicing
24.5”L x 8”W x 5”D, 9 lbs
Starfighter 3000-F 144/*288 Single Fiber and 288/*576 Mass
•
•
•
•
•
•
•
•
•
•
Designed for high capacity splicing at major splice points
Integrated gasket to prevent ingress of water while allowing ease of entry.
* Expandable using 3000-CAK cable expansion kit
Supports butt, inline and express configurations
Up to 4 cable entries, expandable to 8, OD range 0.3 to 1.1”
Suitable for above or below grade installation.
Integrated “F” pressure testing valve and
ground lugs
Equipped with all parts for normal splicing
21”L x 8.5”W x 4.5”D, 10 lbs
21”L x 8.5”W x7.5”D with CAK
Splice Enclosure Selection Guide
Which Multilink Splice
Enclosure is right for
your application?
Questions?
What kind of enclosure
do you want?
What are maximum #
of splices required?
How many cable
entries?
Do you need to express
any tubes through closure?
Dome
Clam Shell
Single – 24
Mass – 48
Single – 72
Mass - 144
Single – 144
Mass - 288
Single - 288
Mass - 576
Single – 96
Mass - 192
4 (2 per end)
Cable OD
.3 to.63”
4 (2 per end)
Cable OD
.3 to.63”
4 (2 per end)
Cable OD
.4 to 1.1”
8 (4 per end)
Cable OD
.4 to 1.1”
6 Butt Config
2 @ .4 to 1.1”
4 @ ??
No
No
* smaller available
*smaller available
Yes
Yes
Single – 192
Mass - 384
6 Butt Config
2 @ .4 to 1.1”
4 @ .3 to .98”
*Smaller and Multi-drop
gromments are available
Yes
Yes
PN 70205K : Starfighter 1120-F MiniButt
Includes one 12 fiber splice tray
and all required supplies.
PN 70902K : Additional 12 fiber splice tray
PN 70582K : Starfighter 3000-F
Includes one 24 fiber splice tray and
all required supplies
PN 70706K : Additional 24 fiber splice tray
Other Grommets: Consult catalog
PN xxxxx : Starfighter 4048-F
Includes one 24 fiber splice tray
and all required supplies
PN 70706K : Additional 24 fiber splice tray
PN 70320K : Starfighter 2000-F
Includes one 24 fiber splice tray
and all required supplies
PN 70506K : Additional 24 fiber splice tray
PN 70582K : Starfighter 3000-F
Includes one 24 fiber splice tray
and all required supplies
PN 70314K : 3000–CAK cable addition kit
PN 70706K: Additional 24 fiber splice tray
Other Grommets : Consult catalog
PN 10-5384 : Starfighter 4000-D
Includes one 24 fiber splice tray and all
required supplies
PN 70706K : Additional 24 fiber splice tray
Other Grommets : Consult Catalog
Mounting
Hardware
Clam Shell Closures:
PN 70800K : Aerial Hanger Brackets (pair)
PN 71241K : ADSS Mounting Bracket (each)
PN 70306K : Pedestal Mounting Bracket (each)
PN 70307K : Wall/Pole Mounting Bracket (each)
Dome Closures:
PN 10-6055 : Aerial Hanger Brackets (each)
PN 10-6056 : Wall/Pole Mounting Bracket (each)