LP-17R Red Long Tip Probe
ATL-4 Test Lead Set
Replacement test probe with 65mm
insulated tip for APPA
17 pen-type multimeter. Also
designed to protect against
accidental contacts, 1000V,
10A.
ATL-1 Test Lead Set
Replacement test lead for APPA A7D,
A7A, A5, and A9. Hard tips Comfortgrip, safety-shrouded, right-angle plug,
48モ(1.2m),1000V, 10A, CAT. IV 600V/
CAT. III 1000V.
APPA Accessories
AH-300 APPA 300 Series Holster (Yellow)
AH-90/100 APPA90/100 Series Holster (Yellow, Grey)
Easy-to Clean, nail hook holster absorbs
shocks and protects meter. Lead and
probe storage on back, lean or stand in
best viewing position.
AH-300 for 300 series DMM
ATL-5 Test Lead Set
AH-90
Extra strong 4mm banana tips for long
life for APPA A7D, A7A, A5, and A9. Hard
tips Comfort-grip, safety-shrouded,
right-angle plug, 48モ(1.2m), 1000V,
10A, CAT. IV
600V/CAT. III 1000V.
Hard alloy tips for long life. Comfortgrip, safety-shrouded, INSULATED
right-angle plug, 48"(1.2m), UL listed
lead wire, 1000V, 10A, CAT III.
Easy-to Clean, nail hook holster
absorbs shocks and protects meter.
Lead and probe storage on back, lean
or stand in best viewing position.
AH-90 for 90 series DMM
AH-100 for 100 series DMM
AH-109 APPA 107/109 Holster (Grey)
Easy-to Clean, nail hook holster absorbs
shocks and protects meter. Lead and
probe storage on back, lean or stand in
best viewing position.
AH-109 for 107/109 DMM
AH-100
AH-70 APPA 70 series holsters (Light Grey)
Easy to Clean, nail hook holster
absorbs shocks and protects meter.
Lead and probe storage on back, lean
or stand in
best viewing position.
ATL-6 Test Lead Set
ATL-2 Test Lead Set
Extra strong 4mm banana tips
for long life. Comfort-grip, safetyshrouded, INSULATED right-angle
plug, 48"(1.2m),
UL listed lead wire,1000V, 10A,
CAT III.
Replacement test lead for APPA new 60
series multimeters. Hard tips Comfortgrip, safety shrouded, right-angle plug,
48モ(1.2m), 1000V, 10A, CAT. III 600V/
CAT. II 1000V.
AH-80 APPA 80 series holsters (Light Grey)
AH-50A/50B APPA 50 Series Holster (Yellow)
Easy to Clean, holster absorbs
shocks and protects meter. Lead and
probestorage on back.
Nail hook holster for meters,
absorbs shocks and protects
the meter from rough handing. built-in
stand.AH-50A for APPA51/53. AH-50B for
APPA 52/55.
AH-50A
AH-50B
ATL-3 Test Lead Set
Replacement test lead for
APPA30/60/90/100/200 series, Hard
tips Comfort-grip,
safety-shrouded, right-angle plug,
48"(1.2m), 1000V, 10A,
CAT III.
Specifications subject to change without notice.
AH-99II APPA 90II series holsters (Light Grey)
AH-60A/60B APPA 60 Series Holster (Grey)
Easy-to-Clean, nail hook holster absorbs
shocks and protects meter, built-in
stand and holder. Lean or stand for best
viewing position. Lead/probe
storage on sid.
AH-60 for APPA63/65.
AH60B for APPA67.69
Copyright © 2005 APPA Tech., Corp. All rights reserved
AH60-A
Easy to Clean, nail hook holster
absorbs shocks and protects meter.
Lead and probe storage on back, lean
or stand in
best viewing position.
AH-60B
Distrubuted by:
APPA TECHNOLOGY CORPORATION
9F, 119-1 Pao-Zong Rd., Shintien, Taipei, 231, TAIWAN
Tel: +886-2-29178820 Fax: +886-2-29170848
E-mail: info@appatech.com · http://www.appatech.com
ISO 9001 CERTIFIED
®
Advanced Instrument Technology Made Easy
AC-31/32 Carrying Case
AC-17 Carrying Pouch
Soft sided.zippered. Nylon fabric
carrying case for APPA 31/32
current transducer or APPA 17+15,
Inside pocktes are designed to
carry test leads and manual,
built-in belt loop.
AC-35 Carrying Case
AC-C2 Carrying Case
AC-C3 Carrying Case
Tough, double wall woven fabric, two way
zipper carrying case for APPA 80, 90, 90II,
100 series, 76 and 25 multimeters. Inside
pockets are designed to carry test lead,
and manual. Convenient 5.3モ(135mm)
belt loop accommodates tool belts
Soft sided, zippered, Vinyl
carrying case for APPA 35N/30 clamp
meter. Inside pockets are designed
to carry
test lead, and manual,
built-in belt loop.
AC-M2 Carrying Case
AC-33 Carrying Case
Tough, double wall woven fabric, one
way zipper carrying case for APPA A
39T, A11/A11R, A12 /A12R, and A18plus.
Inside pockets are designed to carry test
lead, and manual, built-in belt loop.
Vinyl carrying case.Designed
to carry a meter.test leads set.
For APPA 17.
AC-M1 Carrying Case
Soft sided,zippered, Nylon fabric
carrying case for APPA 33/37 clamp
meter. Inside pockets
are designed to carry test lead, and
manual,
built-in belt loop.
TL-10S Test Lead Interface
Connect 4mm banana plugs to
standard input jacks of a multimeter.
Coiled cable for convinent use, extend
up to
60モ (1.5m), 1000V, 10A rating.
TL-70 Clip Test Lead Set
For APPA 76 component tester or
other meters, spring-loaded clips with
serrated teeth, safety-shrouded, rightangle input, 10"(25cm), 250V, 10A. one
red, one black.
Tough, double wall woven fabric, one way
zipper carrying case for APPA 35, 30, 31, 36,
33II, 36II, A10plus, A6, A8, A9, A7, A7D, A5,
A2, and A3. Inside pockets are designed
to carry test lead, and manual,built-in belt
loop.
AC-10S Superior Carrying Case
Tough, double wall woven fabric, two
way zipper carrying case for APPA 50, 60,
70 series multimeters. Inside pockets are
designed to carry test lead, and manual.
Convenient 5.3モ(135mm) belt loop
accommodates tool belts
TC-10 Alligator Clip Set
Slip-on insulated alligator clips for
use with test leads probe 1000V, 10A
rating. one red,
one black.
Tough, double wall woven fabric, two
way zipper carrying case for APPA 10
series meters. Three seperate holders
to carry an
APPA 17 and two transducers, indise
pocket is designed to
carry test leads, bead probe
and manual.
This deluxe carrying case is also
versatile to carry APPA 60 series
multimeter, APPA 50 series
thermometer ...... etc.
AC-C1 Carrying Case
AC-300 Carrying Case
Tough, double wall woven fabric, two
way zipper carrying case for APPA 300
series multimeter. Inside pockets are
designed to carry
test lead, temp. adaptor, bead probe,
RS 232 cable and manual.
SP-17R Red Standard Probe
TL-10 Safety Test Lead Set
Tough, double wall woven fabric, two
way zipper carrying case for APPA 39AC,
39AR, 39MR, A15/A15R, A16/A16R, and
A16H/A16HR. Inside pockets are designed
to carry test lead, and manual, built-in belt
loop.
Replacement test lead for APPA 17.
Include one TC-10B, SP-17R, LP-17R
and ATL-3B.
Replacement test probe for APPA 17
pen-type multimeter. Also designed
to protect against accidental
contacts, 1000V, 10A.