Project Name: Model #: SIS#: AIA#: Location: Item #: Quantity: Precise slicing, all day long! Hardened steel alloy knife & powerful continuous use motor. o 3975NF — 9-speed Standard Features Premium Construction •13" PreciseEdge™ hardened steel alloy knife blade with maximum tip-edge-holding ability • Stainless steel construction with superior corrosion resistance against acids found in fruit, meats & vegetables • Best of the Best, EZ-Glide™ slice system • No-drip base with Marine edge — 1/2" to 3/4" wide and indented areas with 3/16" deep radiused transition and 3/16" deep internal coved corners — redirects liquid to center of base away from controls and operator • 2° angled drip groove on slicer table directs liquid flow to base • Precise slice-thickness adjustment, one-piece handle, gear driven and gasket-sealed • Carriage angle: 45°, full gravity feed • 12" long chute with 3 lb. stainless steel end weight • Powerful 1/2 HP, 7 amp continuous use motor • High-performance gear knife drive • Maintenance-free drive system • No voltage release prevents inadvertent reactivation of slicer in the event of power or interlock interruption • Permanently attached knife blade ring guard with removable cover and deflector • Knife cover interlock prevents slicer from operating without the knife cover in place • Knife sharpening system is removable and BPA Free (no-bisphenol-A), immersible, and dishmachine-safe for cleaning and sanitizing • Touch pad start/stop controls, power indicator light • Ergonomic low-profile design reduces operator fatigue • Dual arm lift lever for cleaning and sanitizing under slicer Standard Features Warranty • 15-year warranty on knife drive gears • Two year parts, one year labor Warranty valid in North America, contact factory regarding warranty in other countries Factory Options and Accessories To select factory installed options and accessories see back Approved by: Date: 2153 Dryden Rd., Dayton, OH 45439 | 937-299-5493 | 800-347-5423 | Fax: 937-299-4147 | www.globefoodequip.com 08-2016 Printed in the U.S. © Globe Food Equipment Company 3975NF Food Zone • Large stainless steel radii, open space base design for cleaning and simple dismantling of components • Knife sharpening system is removable and BPA Free (no-bisphenol-A), immersible, and dishmachine-safe for cleaning and sanitizing • Moisture proof, easy-to-clean direct contact start/stop touchpad controls • Sealed splash zones for added sanitation and protection of electronics Globe® Premium Automatic Frozen Meat Slicer MADE IN THE U.S.A. Model GLOBE FOOD EQUIPMENT COMPANY Premium Heavy-Duty Automatic Frozen Meat Slicer Specifications are subject to change without notice. Premium Automatic Frozen Meat Slicer Elevation / Front View 3975NF Side View 23.0(58.5) 25.1(63.7) 21.6(54.8) 14.0(35.5) 17.3 (43.9) Note: different chute options will change overall height Plan / Top View Side View/Lift Lever 27.7(69.1) 24.9(63.2) 26.7 (67.9) 4.1(10.4) Drawings available through KCL. www.kclcad.com SPECIFICATIONS Model Auto or Manual Motor 3975NF Both 1/2 HP Volts Amps Drive Type Slicing Volume per Day 7 Gear All Day 11560-1 Cheese Slicing 0 100% Time Blade Diameter 13'' (33.02 cm) Max Slice 1-1/4'' (3.18 cm) Product Cutting Capacity D (Diameter) 7.5'' (19.50 cm) W H (Width) (Height) 11.6'' (29.46 cm) 9'' (22.86 cm) Cord & Plug: Attached 7 foot flexible 3-wire cord with molded plug fits a grounded receptacle. NEMA 5-15 DIMENSIONS | SHIPPING INFORMATION Reinforced carton for shipping. The weight and dimensions of this reinforced carton are included below and may vary from shipment to shipment. Shipped on a pallet. Freight class 77.5. Model 3975NF Overall Dimensions Net Weight Shipping Dimensions Shipping Weight 23'' W x 26.7" D x 25.1'' H 145 lbs. 25'' W x 28" L x 34'' H 172 lbs. (69.7 cm x 58.5 cm x 63.7 cm) FACTORY INSTALLED OPTIONS: QUICK-CLEAN™ Proprietary non-stick nickel-based coating (knife cover and slicer table) CORR Correctional package MEATROOM High moisture application package (includes 13" stainless steel knife) LONGCHUTE 15" long food chute (67.1 kg) (71.1 cm x 63.5 cm x 86.4 cm) (78 kg) OPTIONAL ACCESSORIES: 1047 Stainless steel low food fence (12" L x 1⅜" H) 1326 Stainless steel high food fence (12" L x 3" H) 699-BAS Stainless steel vegetable hopper (14" L x 7” D) SC-LARGE Clear plastic slicer cover (recommended for preconstruction) CB Additional cleaning brush 2153 Dryden Rd., Dayton, OH 45439 | 937-299-5493 | 800-347-5423 | Fax: 937-299-4147 | www.globefoodequip.com 08-2016 Printed in the U.S. © Globe Food Equipment Company Specifications are subject to change without notice.