DOOR UNIT
Access Control
OVERVIEW
Supported by all e-DATA Master Unit controllers, the Door Unit provides the interface
for all access point control hardware and readers. Each Door Unit provides two reader
connections supporting multiple door modes, such as single door secured
exit or two individual doors using a “Request for Exit” configuration.
From four to 12 Door Units are supported by the Master Unit
controller series with each supporting two reader connections for
a total of eight to 24 locally connected readers, respectfully.
When configured using a Master Unit, the Door Unit supports all standard
access control readers using an RS485 or Wiegand data connection.
The Door Unit connects easily with a Master Unit using an RS485 connection to
provide a scalable solution by simply adding additional Door Units for distances up to
4,000 feet. All Door Unit connections come with pre-defined factory defaults that can easily
be customized from a supported Master Unit’s built-in access control application software.
STANDARDS SUPPORT
The Door Unit and Master Unit controllers were developed around open standards
supporting XML data format, SOAP for easy XML-based message integration and platformindependent Java application software. The integrated Web server and embedded access
control application allow for easy access and setup via any standard Web browser. This
eliminates the need for traditional PC-based servers and client-side administration software
while providing a powerful and economical hardware controller solution
COMPATIBILITY
The Door Unit
supports all standard
access reader types:
• Fingerprint Key
FEATURES
• Reader inputs (Wiegand/RS485 config.)
• Reader beeper and LED control
• Local power to readers
• Locking hardware/sounder control
• REX device inputs
• Frame contact status monitoring
• Tamper/lockdown
• RS485 communication with Master Units
• I/O remapping via Master Unit embedded application software
(e-DATA Biometrics)
• HID proximity
• HID iCLASS
• AWID
• Legic
• Mifare
EASY TO USE
• EM
The Door Unit provides connection for all standard door hardware monitoring and control
devices. Each on-board connector can be removed, providing ease in terminating field
cabling to connectors for installing the Door Unit module.
• Hitag
• Smart card
ISO 15693/
ISO 14443A
e-data.com
866.807.3549
DOOR UNIT
Access Control
SPECIFICATIONS
External readers
Fingerprint Key (e-DATA Biometrics), HID, AWID, Legic, Mifare, EM, Hitag, SC ISO 15693/ISO 14443A
Internal readers
Legic
Mechanical
Metal mount plate with plastic snap cover (standard) // Rear, side cover access for cable connections
Mounts in standard third-party locking enclosures
Installation
Environmentally controlled areas
Power
Input: 12 to 24V DC (24V DC recommended) // Load: 190 mA plus connected readers (@12V DC)
Dimensions
4.7 x 4.7 x 1.5 in (120 x 120 x 40 mm) with enclosure
Packaged weight
.80 lb (363 g)
Operating temp.
32 to 104° F (0 to 40° C)
Relative humidity
0 to 85%, non-condensing
Interface
Reader (selectable): 2 x RS485, 2 x Wiegand. Alarm Interface Unit: 1 dedicated
I/O (configurable): 6 x inputs, 5 x outputs, 2 x relays (Form C)
DC Power: 12 to 24V DC in, 2 x 12V DC out to readers
MASTER
UNIT 200
SYSTEM DIAGRAM
DOOR
UNIT
10/100 Ethernet
Router
RS485
Web
browser
e-DATA CORP | DALLAS
751 Canyon Drive, Suite 150 | Coppell, Texas 75019 | 866.807.3549 | Fax 972.304.1491 | www.e-data.com | sales@e-data.com
e-DATA CERTIFICATIONS/AFFILIATIONS
environmentally
friendly
UL294
©2010 e-DATA Corporation. All rights reserved. Specifications subject to change without notice. DU ver 1.2, May 2010