SMART kapp iQ 65-V2 board specifications

smarttech.com/docfeedback/171094
Specifications
SMART kapp iQ™ 65-V2 board
Overview
With a SMART kapp iQ™ 65-V2 board, you can capture notes and ideas, present
information and collaborate with others in simple but powerful ways.
Connect a Bluetooth®-enabled mobile device to the board by scanning the Quick
Response (QR) code on the board’s screen. When you first connect your mobile
device, you’re directed to the Apple App Store or Google Play™ to download the
SMART kapp® app. After installing the app, you can connect to your board and share
notes with others. You can write notes in black or red ink using the provided pens and
erase notes with the pens’ erasers or with your palm or fist.
The board’s 4K ultra-high-definition resolution display provides optimal image clarity and viewing from any angle.
See education.smarttech.com for more information about SMART kapp iQ.
Dimensions and weights1
Dimensions
Weight
134 lb. (60.9 kg)
38 1/2" (97.8 cm)
31 5/8" (80.4 cm)
Shipping dimensions (including pallet)
69 1/4" × 49 5/8" × 11 7/8"
(175.8 cm × 126.1 cm × 30.3 cm)
Shipping weight
181 lb. (82.1 kg)
56 1/4" (142.8 cm)
59 3/8" (150.8 cm)
4 3/4"
(12 cm)
As an ENERGY STAR® certified signage display, the SMART Board® 6065-V2 interactive flat panel meets strict
energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy.
1All dimensions ± 1/8" (0.3 cm). All weights ± 2 lb. (0.9 kg).
smarttech.com/kb/171094
1
SPECIFICATIONS
SMART KAPP IQ 65-V2
Hardware
Interaction
Touch technology
DViT® (Digital Vision Touch) technology
Multitouch capabilities
8 touches 2
Object awareness
Behavior adjusts automatically to whatever tool or object is being used, whether it’s a pen,
finger, eraser or palm.
Pen ID™
Two people can write independently and simultaneously, using different colored ink.
Display
Type
LED
Aspect ratio
16:9
Optimal resolution
3840 × 2160 at 30 Hz (HDMI®) or 60 Hz (DisplayPort)
Horizontal frequency
26.97–75.0 kHz
Vertical frequency
23.9–60.32 Hz
Contrast ratio (typical)
1200:1
Brightness (maximum)
338 cd/m²
Pixel pitch
0.372 mm × 0.372 mm
Gamut
68% of NTSC
Viewing angle
178°
Response time (typical) 8 ms
Wireless technology
Bluetooth 4.0 dual mode (backwards compatible with Bluetooth 2.1 + EDR)
Capture options
Establish a Bluetooth wireless connection with a supported mobile device (see below) by
scanning the board’s unique QR code
Presence detection
Presence detection sensor on the bottom frame
Audio
10 W integrated side-firing speakers (×2)
Noise level
<35 dBA
Included cables and
accessories
8' (2.4 m) country-specific power cable
Pen (×2)
Included hardware
AM30-ENT appliance
Mounting holes
For a standard VESA® 300 mm × 400 mm mounting plate
13 3/4" (34.9 cm) from the bottom of the interactive flat panel
Mounting bracket depth
Minimum depth of 1 5/8" (4.2 cm) for all components on the back of the interactive flat panel to
clear the wall
2Requires SMART Product Drivers to be installed, and some applications might not support 8 touches
2
smarttech.com/kb/171094
SPECIFICATIONS
SMART KAPP IQ 65-V2
Connectors
Side
Side connector panel:
USB 2.0 Type-B (×3)
HDMI 1.4 in (×2)
DisplayPort in
Stereo 3.5 mm out
RS-232 in
Back
AC power inlet
AM30-EDU appliance:
USB 3.0 Type-A (×2)
USB 2.0 Type-B 3
USB 2.0 Type-B
HDMI 1.4 in
HDCP encrypted HDMI 1.4 out
RJ45
Installation requirements
Board
See the SMART kapp iQ boards administrator’s guide (smarttech.com/kb/171038)
SMART kapp app
Apple devices
iOS 8.1 or later operating system software
50 MB of storage
iPhone 4S or later
Third generation iPad or later
First generation iPad mini or later
Fifth generation iPod touch or later
Android™ devices
Android 4.4.4 (KitKat) or later operating system
50 MB of storage (internal or SD card)
1024 MB of RAM
720p or better screen resolution
Bluetooth 2.1 + EDR
3 megapixel or better rear-facing camera (recommended)
SMART kapp viewer
Mobile
Safari for iOS 8.1 or later operating system software
Chrome™ for Android 39.0.2171.93 or later
Desktop
Internet Explorer® 10 or later
Chrome 39.0.2171.95 or later
Firefox® 34.0.5 or later
Safari 8.0 or later
Room computers and guest laptops
General requirements
See smarttech.com/kb/170978
4K UHD
Graphics card that can support 3840 × 2160 resolution at 30 Hz and that has 1 GB DDR 5 memory
See kb.smarttech.com/?q=15546
3 For service use only
smarttech.com/kb/171094
3
SPECIFICATIONS
SMART KAPP IQ 65-V2
Mini-computers
General requirements
See smarttech.com/kb/170978
Dimensions
Smaller than 10" × 10" × 2" (25.4 cm × 25.4 cm × 5.1 cm)
Weight
Less than 10 lb. (4.5 kg)
Mounting
VESA 75 mm × 75 mm or 100 mm × 100 mm mounting pattern
Cable requirements
HDMI
HDMI 1.4 compliant or better
Maximum length: 23' (7 m)
Notes:
Use only certified HDMI cables that have been tested to support the performance standard
you require.
The performance of cables longer than 23' (7 m) is highly dependent on the quality of the
cable.
DisplayPort
DisplayPort 1.2 compliant or better
Maximum length: 23' (7 m)
USB
Maximum length: 16' (5 m)
Important
Using cables that exceed these maximum lengths may produce unexpected results, degraded
picture quality or USB connectivity. Refer to the SMART installation standards
(smarttech.com/kb/171035) for a comprehensive guide on cables and extensions for SMART
hardware products.
Storage and operating requirements
Power requirements
100V to 240V AC, 50 Hz to 60 Hz
Solution power consumption at 77°F (25°C)
Standby mode
15 W
Normal operating
113 W
Maximum operating
189 W
Standalone interactive flat panel power consumption at 77°F (25°C)
Standby mode
<2.2 W
Normal operating
(out-of-box)
110 W
Operating temperature
41–95°F (5–35°C)
Storage temperature
-4–140°F (-20–60°C)
Humidity
5–80% relative humidity, non-condensing
4
smarttech.com/kb/171094
SPECIFICATIONS
SMART KAPP IQ 65-V2
Certification and compliance
Regulatory certification
UL (U.S./Canada), FCC, IC, CE, RCM, PSE
Environmental compliance
European Union
REACH, RoHS, WEEE and Packaging
U.S.
Packaging and Conflict Minerals
Purchasing information
Order number
KAPP-IQ65-V2
SMART kapp iQ 65-V2 board
Optional accessories
WM-SBID-501
Fixed wall mount for SMART interactive flat panels
Other
See smarttech.com/businessaccessories
Warranty
Two-year limited equipment warranty
smarttech.com/support
smarttech.com/contactsupport
© 2016 SMART Technologies ULC. All rights reserved. SMART Board, SMART kapp, SMART kapp iQ, DViT, Pen ID, smarttech, the SMART logo and all SMART taglines are trademarks or
registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. iPhone, iPad, iPod touch and Safari are trademarks of Apple Inc., registered in the U.S. and other
countries. Google Play, Android and Chrome are trademarks of Google Inc. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by
SMART Technologies ULC is under license. “HDMI” and all associated logos are trademarks of HDMI Licensing, LLC. All other third-party product and company names may be trademarks of
their respective owners. This product and/or use thereof is covered by one or more of the following U.S. patents: www.smarttech.com/patents. Contents are subject to change without
notice. 11/2016.
smarttech.com/kb/171094
5