LD630/LD640 Network Interface Manual Technical Reference

LD630/LD640
Network Interface Manual
Technical Reference
■ Table of Contents
1. Specifications................................................................................................................. 3
2. How to Connect.............................................................................................................. 5
2-1 Initial Wireless LAN Connection (Windows 2000) .................................................... 6
2-2 Initial Wireless LAN Connection (Windows XP, Server 2003) .................................. 6
2-3 Initial Wireless LAN Connection (Windows Vista, Server 2008, Server 2008R2, 7) . 11
2-4 Initial Wireless LAN Connection (Windows 8, Server 2012) .................................. 17
3. Configuration ............................................................................................................... 21
3-1 Configuration Tool ......................................................................................................23
3-2 Web Browser ..............................................................................................................30
3-3 FTP .............................................................................................................................33
3-4 Telnet ..........................................................................................................................35
4. SMTP ............................................................................................................................. 36
5. Ethernet/WLAN Test by using Windows Test Page................................................... 39
6. Factory Reset ............................................................................................................... 45
7. Troubleshooting ........................................................................................................... 47
-2-
LD630/LD640
1. Specifications
(1) WLAN USB Adapter (IEEE 802.11b/g)
LD630/LD640 requires WLAN USB adapter to use the wireless LAN function.
LD630/LD640 is compatible with WLAN adapters using the Ralink RT73, ZD1211rw
chipset. WLAN USB adapters using chipsets other than Ralink RT73, ZD1211rw won’t
work when they are connected to LD630/LD640.
The following products are recommended. (Test completed)
RT73 chipset
Manufacturer
Model Name
CNET
CWD-854
TP-Link
TL-WN32G
D-Link
DWA-110
D-Link
DWL-G122
Buffalo
WLI-U2-SG54HP
ZIO
F7
Manufacturer
Model Name
3COM
3CRUSB10075
PCI
GW-US54GXS
ZYXEL
AG-225H
Manufacturer
Model Name
PREMIERTEK
PL-H5DN-3070
TP-Link
TL-WN321G
ZD1211rw chipset
RT2070sta chipset
8712u chipset(support 802.11 b/g/n)
Manufacturer
Model Name
IOGEAR
GWU-625
ZIO
ZIO-3000NU
AZiO
AWU212N
-3-
LD630/LD640
(2) Ethernet / WLAN Protocol
Layer
Network Layers
Transport Layers
Application Layers
Protocol
ARP, IP, ICMP
TCP, UDP
DHCP, DNS
Raw Print
SMTP (notify printer status)
HTTP, HTTPS (setting)
FTP (settings)
TELNET (settings)
(3) Ethernet Security
- HTTPS (SSL2.0, SSL3.0, TLS1.0)
(4) WLAN Security
- WEP64/128
- WPA/WPA2 (TKIP/AES-CCMP) PSK
- EAP(PEAP, FAST, LEAP, TTLS)
- HTTPS (SSL2.0, SSL3.0, TLS1.0)
-4-
LD630/LD640
2. How to Connect
Both Ethernet and WLAN can be configured through the printer’s Ethernet interface.
Likewise, both Ethernet and WLAN can also be configured though the printer’s WLAN
interface. When you want to change the Ethernet or WLAN of the printer, the network
settings of the host (PC, PDA, etc) and Ethernet or WLAN of the printer must configured
properly configured so that communication can be established.
(1) Connecting Printer
1) LAN
Connect the LAN cable to the printer
A direct cable or cross cable can be connected to the Hub or Host for use.
2) WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect
to the LAN/wireless network.
AP
Infrastructure Mode
In order to configure the network between wireless terminals, connect to the terminal in
Ad-hoc Mode.
Ad-hoc Mode
-5-
LD630/LD640
2-1 Initial Wireless LAN Connection (Windows 2000)
Windows 2000 does not support wireless network setting.
When you use Windows 2000, you need to set the utility option as below after installing
utility program related to the wireless lan driver that you use.
- Network mode : Ad-hoc
- SSID : OKI_adhoc
- IP address : 192.168.1.2
- Subneet Mask : 255.255.255.0
- Authentication(Encrpition) : Open(None)
2-2 Initial Wireless LAN Connection (Windows XP, Server 2003)
When wireless utility program is installed, you have to set the wireless control values
via the program, otherwise you have to terminate the program in order to do proper
setting after following the steps 'Control Panel>>Administrative tools>>
Services>>Wireless Zero Configuration>>Start'.
1) Right click on the
icon, and select Properties.
2) Select and right click on the Wireless Network Connection, and then select Properties.
-6-
LD630/LD640
3) Select Internet Protocol (TCP/IP), and then click Properties.
4) Set the IP settings as shown below, and then click OK.
-7-
LD630/LD640
5) Select the Wireless LAN tab, and then select “Use Windows to configure my wireless
network settings.”
Click the [Advanced] button.
6) Select “Computer-to-computer (ad hoc) network only.”
-8-
LD630/LD640
7) Click the [Add] button.
8) Enter “OKI_adhoc” as the Network name (SSID).
Select the connection, even if the network is not broadcasted.
Network Authentication: Select [Open]
Data Encryption: Select [Disabled]
Click the [OK] button.
-9-
LD630/LD640
9) Click the “Connect” tab and check “Connect when this network is in range.”
10) Check whether the settings are updated as shown below, and then click [Close]
When the printer is set to the default value (Adhoc mode, SSID: OKI_adhoc), it will
automatically connect.
- 10 -
LD630/LD640
2-3 Initial Wireless LAN Connection (Windows Vista, Server 2008, Server
2008R2, 7)
When wireless utility program is installed, you have to set the wireless control values
via the program, otherwise you have to terminate the program in order to do proper
setting after following the steps 'Control Panel>>Administrative tools>>
Services>>Wireless Zero Configuration>>Start'.
1) Click the “Start>>Conftrol Panel”.
2) Click the “View network status and tasks”.
- 11 -
LD630/LD640
3) Click the “Change adapter settings”.
Click the “wireless network adaptor’s Properties”.
4) Select Internet Protocol Version 4(TCP/IPv4), and then click Properties.
- 12 -
LD630/LD640
5) Set the IP settings as shown below, and then click OK.
6) Click the “Manage wireless networks”.
- 13 -
LD630/LD640
7) Click the “Add”.
8) Click the “Create an ad hoc network”.
- 14 -
LD630/LD640
9) Click the “Next”.
10) ‘Network name’ = OKI _adhoc,
‘Security type’ = Open,
‘Save this network’ check, and then click the “Next”.
- 15 -
LD630/LD640
11) Click the “Close”.
12) After completing configuration, OKI_adhoc network will be created.
When the printer is set to the default value (Adhoc mode, SSID: OKI_adhoc),
it will automatically connect.
- 16 -
LD630/LD640
2-4 Initial Wireless LAN Connection (Windows 8, Server 2012)
-Please follow the settings below.
1) Click the “Settings>>Control Panel”.
- 17 -
LD630/LD640
2) Click the “View network status and tasks”.
3) Click the “Change adapter settings”.
Click the “wireless network adaptor’s Properties”.
- 18 -
LD630/LD640
4) Select Internet Protocol Version 4(TCP/IPv4), and then click Properties.
5) Set the IP settings as shown below, and then click OK.
- 19 -
LD630/LD640
6) Click the “Settings>>Available(Wireless Lan)”.
7) Click the “OKI_adhoc”.
- 20 -
LD630/LD640
3. Configuration
LAN Setting Values
Classification
Item
Home
Printer name
0~32 letters
Printer Port
TCP Raw port that the
printer can use
0~32767 integers
(except 21, 23, 25, 80,
443, 3318)
User Name
ID to use for ftp, telnet,
web-server log-in
1~32 letters
User Password
Password to use for ftp,
telnet, web-server log-in
1~32 letters
Confirm Password
1~32 letters
Confirm Password
WebServer SSL
Protocol
TELNET
Set whether to use HTTPS
or not
Enable/Disable
Http cannot be used when
using Https
Set whether to use Telnet
Enable/Disable
Set whether to use FTP
Enable/Disable
SMTP
Set whether to use SMTP
Enable/Disable
Inactivity Time
TCP connection hold time
0~3600 integer(Sec)
IP Assignment
Method
IP assignment method
DHCP/Manual
Printer IP
IP Address
Subnet mask
IP Address
Default Gateway
IP Address
Domain name server IP
IP Address
FTP
Network
Input Range
LAN setting status display
Printer Name
System
Remarks
IP Address
Subnet Mask
Gateway
DNS
- 21 -
LD630/LD640
WLAN Setting Values
Classification
Item
Home
Input Range
WLAN setting status display
Printer Name
Printer Port
System
Remarks
User Name
User Password
Confirm Password
Printer Name
0~32 letters
TCP Raw port that the printer
0~32767 integers
can use
(except21,23,25,80,443,3318)
ID to use for ftp, telnet, webserver log-in
Password to use for ftp, telnet,
web-server log-in
Confirm Password
1~32 letters
1~32 letters
1~32 letters
Set whether to use HTTPS
WebServer SSL
Http cannot be used when using
Enable/Disable
Https
Protocol
TELNET
FTP
SMTP
Network Mode
Adhoc Channel
SSID
Enable/Disable
Set whether to use SMTP
Enable/Disable
Wireless LAN operating mode
Infrastructure/Adhoc
Channel when creating Adhoc
network
1~14
TCP connection hold time
0~3600 integer
IP Assignment Method
DHCP/Manual
Printer IP
IP Address
Subnet mask
IP Address
Default Gateway
IP Address
Domain name server IP
IP Address
Wireless LAN authentication
open, shared,
method
wpa1/2-psk, wpa1/2
Wireless LAN encryption method
none, WEP64/128,TKIP, AES
EAP Mode
Authentication method
none, PEAP, TLS, LEAP, FAST
WEP Key
Key for WEP encryption method
PSK Key
Key for PSK encryption method
1~64 letters
ID for EAP Authentication
1~32 letters
Password for EAP Authentication
1~32 letters
IP Assignment
IP Address
Subnet Mask
Gateway
DNS
Authentication
Cryptograph
Authentication ID
Authentication PW
Wizard
Set whether to use FTP
1~32 letters
Method
Authentication
Enable/Disable
ID of the AP to connect
Inactivity Time
Network
Set whether to use Telnet
Setting wizard for each step
- 22 -
WEP64 (5 Ascii, 10 Hex)
WEP128 (13 Ascii, 26 Hex)
LD630/LD640
3-1 Configuration Tool
Execute Net Configuration from Start menu.
(Start>>Okidata>>Net Configuration)
Click the Ethernet Configuration button when the printer is connected to the
Ethernet, or click the WLAN button when the printer is connected through WLAN.
LAN Configuration
- 23 -
LD630/LD640
When you press the Search button, the LD630/LD640 printer connected to the network will
be shown in the list.
The following warning message may pop up if the firewall is installed.
Select [Unblock], and then retry the Search operation.
Select the LD630/LD640 printer from the list and press the [Setting] button, and then the
following window for setting Ethernet settings will pop up.
- 24 -
LD630/LD640
Enter the proper IP Address, Subnet Mask, and Gateway for the currently used network,
and then press the Save button to save the settings.
(Device Baudrate setting, which is used for other models, is not necessary for
LD630/LD640.)
Select the LD630/LD640 printer from the list and press the [Configuration(Web)] button,
and then the Login window will pop up.
Enter the ID and Password set for the printer, and then click OK
(Default settings are ID: “admin”, Password: “password”)
- 25 -
LD630/LD640
When you log in, you will see the web browser for changing the Ethernet and WLAN
settings as shown below.
WLAN Configuration
When you press the Search button, the LD630/LD640 printer connected to the network will
be shown in the list.
- 26 -
LD630/LD640
Select the LD630/LD640 printer from the list and press the [Setting] button, and then the
following window for changing the WLAN settings will pop up.
Enter the proper IP Address, Subnet Mask, and Gateway of the currently used network,
and then click the [Save] button to save the settings.
(Device Baudrate setting, which is used for other models, is not necessary for
LD630/LD640.)
- 27 -
LD630/LD640
Select the LD630/LD640 printer from the list and press the [Configuration(web)] button,
and then the Login window will pop up.
Enter the ID and Password set in the printer, and click OK.
(Default settings are ID: “admin”, Password: “password”)
When you log in, you will see the web browser for changing the Ethernet and WLAN
settings as shown below.
- 28 -
LD630/LD640
You can search for the information of the wireless network by pressing the BSS Info button.
When you press the BSS Info button, information about the SSID, BSSID, Network Model,
and Encryption information of the network in close range will be shown as follows.
- 29 -
LD630/LD640
3-2 Web Browser
LD630/LD640 supports the security enhanced https protocol as well as http. When SSL of
the web server of LD630/LD640 is enabled, you must enter the address with “https”
instead of “http” in the address bar to connect to the web-server.
(Automatic connection will be made when connecting with the configuration tool.)
When SSL of the web-server is enabled,
* a security warning window will pop when you try to connect with https.
Accept the certificate provided by the printer in the warning window and continue.
When SSL of the web-server is disabled,
enter the IP address of the printer in the address bar, and the following login window will
pop up.
Enter the ID and Password set for the printer, and then click [OK]
(Default setting values are ID: “admin”, Password: “password”.)
- 30 -
LD630/LD640
When the ID and Password match the ones registered in the printer, the following window
will be opened.
Both LAN and WLAN can be configured from this window.
LAN Configuration Selection
- 31 -
LD630/LD640
Settings related to Home, System, Protocol, and Network (LAN) can be configured in this
window.
Wireless LAN selection
Home, System, Protocol, Network (WLAN), and Authentication can be configured from this
window, and the wizard mode is also provided for easier step by step configuration.
- 32 -
LD630/LD640
3-3 FTP
The configuration files will be downloaded and uploaded to and from the current path. In
the following case, the current path is “C:\Documents and Settings”.
Enter “ftp Printer IP”, and enter the ID and Password set for the printer.
Enter the “ls” command to check the file name to download.
Enter “get LD630D.config” to download the configuration file.
You can see that the “LD630D.config” file is created in the corresponding directory.
Enter “put LD630D.config” command if you want to upload the configuration file in the
corresponding directory for the printer.
- 33 -
LD630/LD640
The contents of the LD630D.config file are as follows.
* The format of the configuration file is “Configuration item: Setting value”.
Uploading a file that doesn’t have the format shown above will not change the setting
values.
- 34 -
LD630/LD640
3-4 Telnet
Enter “telnet Printer IP”.
Enter the ID and Password set for the printer.
The screen related to the network configuration will then be displayed.
You can select the menu to configure and edit the settings.
- 35 -
LD630/LD640
4. SMTP
The changes of the status of the printer are monitored, and a notification e-mail is sent to
the registered administrators.
SMTP must be enabled to use the SMTP function.
You can use the web browser, telnet, or ftp to enable the SMTP.
(Refer to Configuration)
Using Web Browser
Connect to the printer web-server. (Enter the IP address of the printer in the address bar.)
Select LAN or WLAN configuration, and then select the Protocol tab.
- 36 -
LD630/LD640
Click the Configuration button to display the following window.
- 37 -
LD630/LD640
Check the SMTP setting values
SMTP User ID
SMTP Password
SMTP Server Name
SMTP Port Number
From Address
To Address
Check Interval
Paper Empty
Cover Open
Cutter Error
Check the ID registered to the mail server.
Enter the password for the corresponding User ID.
Enter the mail server. (Example: Domain or mail server IP)
* Check DNS settings when entering domain.
Enter SMTP port
Default value of the SMTP Port is 25.
Enter the e-mail address to be shown at the mail receiver.
Enter the e-mail address to receive
Enter the period to check the printer status
Entered value will be effective in second unit
ON – E-mail is sent out when there is no paper
OFF – Paper empty status is not checked
ON – E-mail is sent out when the printer cover is open.
OFF – Printer cover status is not checked
ON – E-mail is sent out when there is error in the auto cutter
OFF – Auto cutter error is not checked
ON – E-mail is sent out when the printer is almost out of
Near End
paper
OFF – Paper remaining status is not checked
Ribbon
Calibration Error
TPH Over Heat
Paper Jam
ON – E-mail is sent out when there is no ribbon
OFF – Paper empty status is not checked
ON – E-mail is sent out when calibration is failed
OFF – Doesn’t check auto paper setting errors
ON – Check TPH when overheated
OFF – Doesn’t check TPH overheat.
ON – E-mail is sent out when paper is jammed
OFF – Doesn’t check paper jam
- 38 -
LD630/LD640
5. Ethernet/WLAN Test by using Windows Test Page
You can use the Windows printer driver as shown below when there is no test program.
Operating systems that allow you to use the Windows printer driver are Windows 2000, XP,
Server 2003, Vista, Server 2008, Server 2008R2, 7, 8 , Server2012.
1) Install the Windows printer driver.
2) Click the Start button, and then select “Printers and Faxes.”
3) Select and right click on the corresponding model, and then select “Properties.”
- 39 -
LD630/LD640
4) Select the “Ports” tab from the “Properties” window.
5) Click “Add Port…”
- 40 -
LD630/LD640
6) Select “Standard TCP/IP Port” and click “New Port...”
7) Click the [Next] button in the “Add Standard TCP/IP Printer Port Wizard” window.
8) Enter the IP address assigned to the printer in the “Printer Name or IP Address” field in
the “Add Port” pop up window, and then click the [Next] button.
[Note]
- Enter the same IP address entered during the installation of the interface card.
Only enter the “Printer name or IP address.”
- 41 -
LD630/LD640
9) Click the [Next] button in the “Additional Port Information Required” window.
[Note]
- Click the [Next] button to proceed without any changes.
10) Click the [Finish] button at the “Completing the Add Standard TCP/IP Printer Port
Wizard” window.
11) Click the “Close” button in the Printer Port window, closing the window.
- 42 -
LD630/LD640
12) Click the “Configure Port...” button in the “Properties” window.
13) Enter the same number as the local port number set during the installation of the
interface card in the “Port Number” field in the Raw Settings.
[Note]
- Do not change any other items except the RAW Settings.
- 43 -
LD630/LD640
14) Click [OK] when you finish entering the required values, and then click the [Apply]
button.
15) Select the “General” tab in the Properties window, and then select the “Print Test
Page” to check the printing status.
- 44 -
LD630/LD640
6. Factory Reset
This function changes the Ethernet and WLAN settings of the printer to the initial factory
settings.
Method
In order to carry out the factory reset, turn off the printer, and then turn on the printer while
pressing the reset button as shown in the following picture.
- After booting on printer is done, it will be printed out the Ethernet information by pressing
the Ethernet reset button.
- 45 -
LD630/LD640
Factory Reset Values
Printer Name
Printer Name
LD630T or LD630D or LD640T or LD640D
Printer Port Number
9100
User ID
admin
User Password
password
FTP
Disabled
TELNET
Disabled
HTTPS
Disabled
Disabled
SMTP Server Name: ""
SMTP Port Number: 25
Protocol
From Address : ""
SMTP
To Address: ""
Check Interval (Sec) : 10
Paper Empty: OFF
Cover Open: OFF
Cutter Error: OFF
Near End: OFF
Authentication
LAN
Open System
None
Shared key
None
IP Assignment Method
DHCP
Network Mode
SSID
WLAN
IP Assignment Method
IP, Subnet, Gateway
Ad-hoc, channel 6
OKI_adhoc
manual
IP : 192.168.1.1
Subnet : 255.255.255.0
Gateway : 192.168.1.2
- 46 -
LD630/LD640
7. Troubleshooting
When printing doesn’t work
Check network setting
When using Ethernet
- IP Address
Check whether the IP Address band of the printer rand the AP (or
wireless terminals) are the same. The first three digits of the four digit
value in the IP Address must be the same.
- Subnet Mask
Check whether the subnet mask of the printer matches with the one in
-
AP (or wireless terminal).
Port
Check whether the port configured in the printer and the host (PC,
PDA) are the same.
When using WLAN
Check the wireless network setting of the AP and the printer.
(Refer to Configuration for checking/changing the printer settings)
- SSID
Check whether the SSID of the printer matches with the one in AP (or
wireless terminal)
-
-
-
-
802.11 mode
Check whether AP supports 802.11b or 802.11g.
Oki data printer supports 802.11b/g, and 802.11a is not supported.
Network Mode
Check the network mode of the printer.
Network mode must be set to “Infrastructure” to connect to AP and
“Ad-hoc” to connect between wireless terminals.
IP Address
Check the band of the IP Address.
Check whether the band of the printer and the AP (or wireless
terminals) are the same.
The first three digits of the four digit value of the IP address must be
the same.
Subnet Mask
Check whether the subnet mask of the printer matches the one in AP
(or wireless terminal).
- 47 -
LD630/LD640
-
-
Port
Check whether the port configured in the printer and the host (PC,
PDA) are the same.
Authentication / Encryption
Check the authentication/encryption setting status.
Check whether the settings of the printer and the AP (wireless
terminals) are the same.
PING Check
Checking IP collision
- When entering IP address manually without using DHCP, you must
check whether the corresponding IP address is used by other
-
equipment. The printer may not work normally when there is a
collision in the IP address.
When the printer is turned off, carry out the Ping Test to the printer IP.
-
Turn off the printer.
Select “Run” from the Windows Start menu, and then enter “cmd”.
Enter “ARP –d” and delete ARP table.
Enter “ping {printer IP}”.
ARP –d, ping {IP address}
Ping TEST
When you see “Request timed out.” as shown below, it means that there is no collision.
The corresponding IP can be used.
- 48 -
LD630/LD640
On the other hand, if there is a reply as shown below, then the corresponding IP is used by
another network terminal and it cannot be used for the printer IP.
Check Cable
When using Ethernet
- In order to check whether the problem is due to the LAN cable,
connect the cable connected to the printer to other terminals or the
PC to confirm whether its operation is normal.
When using WLAN
- Connect the USB extended cable and WLAN dongle to other
terminals or the PC and confirm whether recognition operation is
normal.
Check whether WLAN USB adaptor uses the Ralink RT73 chipset.
WLAN USB adaptors that use chipsets other than RT73 of Ralink
won’t work when it is connected to LD630/LD640.
- 49 -
Oki contact details
Oki Systems (UK) Ltd
Blays House
Wick Road
Egham
Surrey
TW20 0HJ
Tel: +44 (0) 1784 274300
Fax: +44 (0) 1784 274301
http://www.oki.co.uk
Oki Systems Ireland Limited
The Square Industrial Complex
Tallaght
Dublin 24
Tel:+353 (0) 1 4049590
Fax:+353 (0)1 4049591
http://www.oki.ie
Oki Systems Ireland Limited Northern Ireland
19 Ferndale Avenue
Glengormley
BT36 5AL
Northern Ireland
Tel:+44 (0) 7767 271447
Fax:+44 (0) 1 404 9520
http://www.oki.ie
Technical Support for all Ireland:
Tel:+353 1 4049570
Fax:+353 1 4049555
E-mail: tech.support@oki.ie
OKI Systems (Czech and Slovak), s.r.o.
IBC – Pobřežní 3
186 00 Praha 8
Czech Republic
Tel: +420 224 890158
Fax:+420 22 232 6621
Website: www.oki.cz, www.oki.sk
Oki Systems (Deutschland)
GmbH
Hansaallee 187
40549 Düsseldorf
Tel:01805/6544357**
01805/OKIHELP**
Fax: +49 (0) 211 59 33 45
Website:
www.okiprintingsolutions.de
info@oki.de
**0,14€/Minute aus dem dt.
Festnetz der T-Com (Stand
11.2008)
Διανομέας των συστημάτων OKI
CPI S.A1 Rafailidou str.
177 78 Tavros
Athens
Greece
Tel: +30 210 48 05 800
Fax:+30 210 48 05 801
EMail:sales@cpi.gr
Oki Systèmes (France) S.A.
OKI Europe Ltd. (Russia)
44-50 Av. du Général de Gaulle
94246 L'Hay les Roses
Paris
Office 702, Bldg 1
Zagorodnoye shosse
117152, Moscow
Tel:+33 01 46 15 80 00
Télécopie:+33 01 46 15 80 60
Website: www.oki.fr
OKI Systems (Magyarország)
Kft.
Tel: +74 095 258 6065
Fax: +74 095 258 6070
e-mail: info@oki.ru
Website: www.oki.ru
Capital Square
Tower 2
7th Floor
H-1133 Budapest,
Váci út 76
Hungary
Telefon: +36 1 814 8000
Telefax: +36 1 814 8009
Website: www.okihu.hu
OKI Systems (Italia) S.p.A.
via Milano, 11,
20084 Lacchiarella (MI)
Tel:+39 (0) 2 900261
Fax:+39 (0) 2 90026344
Website: www.oki.it
OKI Printing Solutions
Platinium Business Park II, 3rd
Floor
ul. Domaniewska 42
02-672 Warsaw
Poland
Tel:+48 22 448 65 00
Fax:+48 22 448 65 01
Website: www.oki.com.pl
E-mail: oki@oki.com.pl
Hotline: 0800 120066
E-mail: tech@oki.com.pl
Oki Systems (Ibérica) S.A.
Sucursal Portugal
Edifício Prime Av. Quinta Grande 53
7º C Alfragide
2614-521 Amadora
Portugal
Tel:+351 21 470 4200
Fax:+351 21 470 4201
Website:www.oki.pt
E-mail : oki@oki.pt
Oki Service
Serviço de apoio técnico ao
Cliente
Tel: 808 200 197
E-mail : okiserv@oki.pt
Technical support:
Tel: +7 495 564 8421
e-mail: tech@oki.ru
Oki Systems (Österreich)
Campus 21
Businesszentrum Wien Sued
Liebermannstrasse A02 603
22345 Brun am Gebirge
Tel: +43 223 6677 110
Drucker Support:
+43 (0) 2236 677110-501
Fax Support:
+43 (0) 2236 677110-502
Website: www.oki.at
OKI Europe Ltd. (Ukraine)
Raisy Opkinoy Street,8
Building B, 2nd Floor,
Kiev 02002
Ukraine
Tel: +380 44 537 5288
e-mail: info@oki.ua
Website: www.oki.ua
OKI Sistem ve Yazıcı Çözümleri
Tic. Ltd. Şti.
Harman sok Duran Is Merkezi,
No:4, Kat:6,
34394, Levent
İstanbul
Tel: +90 212 279 2393
Faks: +90 212 279 2366
Web: www.oki.com.tr
www.okiprintingsolutions.com.tr
Oki Systems (Belgium)
Medialaan 24
1800 Vilvoorde
Helpdesk: 02-2574620
Fax: 02 2531848
Website: www.oki.be
AlphaLink Bulgaria Ltd.
2 Kukush Str.
Building "Antim Tower", fl. 6
1463 Sofia, Bulgaria
tel: +359 2 821 1160
fax: +359 2 821 1193
Website: http://bulgaria.oki.com
OKI Printing Solutions
Oki Systems (Schweiz)
Oki Data (Singapore) Pte. Ltd.
Herstedøstervej 27
2620 Albertslund
Danmark
Baslerstrasse 15
CH-4310 Rheinfelden
438A Alexandra Road #02-11/12,
Lobby 3, Alexandra Technopark
Singapore(119967)
Adm.: +45 43 66 65 00
Hotline: +45 43 66 65 40
Salg: +45 43 66 65 30
Fax: +45 43 66 65 90
Website: www.oki.dk
Oki Systems (Finland) Oy
Support deutsch +41 61 827 94 81
Support français +41 61 827 94 82
Support italiano +41 061 827 9473
Tel: +41 61 827 9494
Website: www.oki.ch
Oki Data Americas Inc.(United
States • États-Unis)
Polaris Capella
Vänrikinkuja 3
02600 Espoo
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
USA
Tel: +358 (0) 207 900 800
Fax: +358 (0) 207 900 809
Website: www.oki.fi
Oki Systems (Holland) b.v.
Tel: 1-800-654-3282
Fax: 1-856-222-5247
http://WWW.OKIPRINTINGSOLUTIONS.
COM
http://my.okidata.com
Oki Data Americas Inc.(Canada
• Canadá)
Neptunustraat 27-29
2132 JA Hoofddorp
Helpdesk: 0800 5667654
Tel:+31 (0) 23 55 63 740
Fax:+31 (0) 23 55 63 750
Website: www.oki.nl
Oki Systems (Norway) AS
Tevlingveien 23
N-1081 Oslo
Tel:+47 (0) 63 89 36 00
Telefax:+47 (0) 63 89 36 01
Ordrefax:+47 (0) 63 89 36 02
Website: www.oki.no
General Systems S.R.L. (Romania)
Sos. Bucuresti-Ploiesti Nr. 135.
Bucharest 1
Romania
Tel: +40 21 303 3138
Fax: +40 21303 3150
Website: http://romania.oki.com
Var vänlig kontakta din
Återförsäljare i första hand, för
konsultation. I andra hand kontakta
Oki Systems (Sweden) AB
Borgafjordsgatan 7
Box 1191
164 26 Kista
Tel. +46 (0) 8 634 37 00
e-mail:
info@oki.se för allmänna frågor om
Oki produkter
support@oki.se för teknisk support
gällandes Oki produkter
Vardagar: 08.30 - 12.00,
13.00 - 16.00
Website: www.oki.se
4140B Sladeview Crescent Unit 7 & 8
Mississauga, Ontario
Canada L5L 6A1
Tél: 1-905-608-5000
Téléc: 1-905-608-5040
http://WWW.OKIPRINTINGSOLUTIONS.
COM
Oki Data Americas Inc.(América
Latina (OTRO))
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
USA
Tel (Español):1-856-222-7496
1-856-222-5276
Fax: 1-856-222-5260
Email: LASatisfaction@okidata.com
Oki Data de Mexico, S.A. de C.V.
Mariano Escobedo #748, Piso 8
Col. Nueva Anzures
C.P. 11590, México, D.F.
Tel: 52-555-263-8780
Fax: 52-555-250-3501
http://WWW.OKIPRINTINGSOLUTIONS.
COM
Oki Data do Brasil, Ltda.
Rua Alexandre Dumas, 2220-80
andar Chácara Santo Antonio
04717-004, São Paulo, SP Brasil
Tel:55-11-3444-6747 (Grande São
Paulo)
0800-11-5577 (Demais
localidades)
Fax: 5511-3444-3501
e-mail: okidata@okidata.com.br
http://WWW.OKIPRINTINGSOLUTIONS.
COM
Tel:(65) 6221 3722
Fax:(65) 6594 0609
http://www.okidata.com.sg
Oki Systems (Thailand) Ltd.
1168/81-82 Lumpini Tower,
27th Floor Rama IV Road
Tungmahamek, Sathorn
Bangkok 10120
Tel:(662) 679 9235
Fax:(662) 679 9243/245
http://www.okisysthai.com
Oki Data(Australia) Pty Ltd.
Level1 67 Epping Road, Macquarie
Park
NSW 2113, Australia
Tel: +61 2 8071 0000
(Support Tel: 1800 807 472)
Fax: +61 2 8071 0010
http://www.oki.com.au
Comworth Systems Ltd.
8 Antares Place Rosedale,
Auckland 0632, New Zealand
Tel:(64) 9 477 0500
Fax:(64) 9 477 0549
http://www.comworth.co.nz
Oki Data(S) P Ltd. Malaysia Rep
Office
Suite 21.03, 21st Floor Menara IGB,
Mid Valley City,
Lingkaran Syed Pura 59200,
Kuala Lumpur, Malaysia
Tel: (60) 3 2287 1177
Fax: (60) 3 2287 1166
Oki Data Corporation
4-11-22 Shibaura, Minato-ku,Tokyo
108-8551, Japan
www.okiprintingsolutions.com
Rev2