Ideal 6550-95EP - Fuji Xerox Supplies

Ideal 6550-95EP
Electric Guillotine
The Ideal 6550-95EP guillotine comes with automatic
clamp and programmable “EP” power back gauge. It
features two programmable keys for quick setting of
frequently needed measurements and electronic hand
wheel for manual back gauge positioning with infinitely
variable speed control from slow to fast motion. It has a
drawn optical cutting line that shows where the cut will
be performed and helps to align cutting marks precisely
for accurate cuts. It is designed with electronically
secured front safety guard to allow safe and convenient
Automatic clamping system
SCS (Safety Cutting System)
Memory key for repeat cuts
“Set” function key for reference measurement
Programmable “eject” function – for pushing out the
Self-diagnosis system with error indication
Optical cutting line
Sold complete with stand and shelf storage
High-quality blade made from “Solingen steel”
Transparent safety guard on the front table
Transparent hand guard on the rear table
Spindle guided back gauge for precise positioning
Technical Information
Cutting length: 650mm
Cutting height: 80mm
Table depth: 610mm
Narrow cut: 35mm
Electrical requirements: 230 V / 50 Hz 15amp
Special Information
“EP” Backgauge Control
Fully programmable back gauge control module with
digital measurement readout, 10 push button key pad,
and memory key for repeat cuts.
Push Button Control
Push buttons allow, that the automatic clamp can be
moved up and down independent of blade movement.
Product Listing:
Part Number:
(H) 1220 x (W) 995 x (D) 1260mm
For more information or to place an order please contact your Fuji Xerox Sales Representative,
call 13 14 11 or visit our website
Fuji Xerox Australia Pty Ltd. Level 2, 101 Waterloo Road, Macquarie Park, NSW, 2113. Tel: (02) 9856 5000 Fax: (02) 9856 5680 Website:
Xerox and the sphere of connectivity design are trademarks or registered trademarks of Xerox Corporation in the U.S. and/or other countries.
The contents described herein are correct as of 2012.