AudicomPendax`s patented universal mount for projectors A

Ceiling and wall brackets for projectors and screens
AudicomPendax’s patented universal mount for projectors
AX
SO LUT

MP E ND
TE D
1 Telescopic - can be set at any height.
AUD
ICO
IO N
3 Can be rotated at any angle.
4 The arms can be placed at all angles and even
coupled with other arms.
PATEN
2 Ball joint.
5 The fasteners for the projector can be fully
adjustable for the perfect projection!
A Swedish classic
Classic, X-Line and Superlight use all variants on the
same patented Universal Stand Solution. Classic was
the first universal mount in the market. Since it was
designed 15 years ago, it is adapted to larger and
heavier projectors.
1 Adjustable and variable height is a requirement
when projectors are going to hang down from the
ceiling. Classic (as seen in the picture) has a telescopic
tube that makes it easy to adjust. X-Line, available
in up to 5 meters in length, and the Superlight has
instead two aluminium profiles that are easy to cut
with a portable saw to get them in exactly the right
length.
With X-Line you use the powerful 4 steel arms
for setting the rotation. The steel arms are used to
build up to the projector’s mounting points. These
are not standardized as on televisions but are placed
differently on each model. Often also at different
heights.
Super Light is equipped with a 2 ball joint that
allows you to set the projector’s rotation exactly
as you want. Classic has the arrangement with 3
brackets that combines power and adjustability in a
practical way.
In order for the image to end up on the millimeter
right on the projection surface that can be several
meters away from the projector and projector mount,
156
there must be the possibility of 5 fine tuning.
The springs help you get it exactly right and they
compensate for small vibrations that may occur for
various reasons.
Most of us do not think at all about how the projector
is sitting up there in the ceiling and never have any
problems with an image that is skewed or weird.
Chances are that it depends on a solution that we at
AudicomPendax came up with 15 years ago.
Ceiling and wall brackets for projectors and screens
Ceiling and wall brackets for projectors
AX
S O L UT

M P E ND
T ED
A UD
IC O
IO N
PATEN
Projector mounts
Unique patented universal stands!
Quickly mount and easy to adjust image. Patented
according to patents: 0200362-2, 0300817-4,
EPC1472488 and others. The basic range consists of
Classic, Basic, Superlight and X-Line.
157
Ceiling and wall brackets for projectors and screens
Classic
X-Line bracket
Basic
Superlight
The complete, patented, stand. Ready for all types
of projectors up to 40 kg. The frame can be used
as wall or ceiling bracket. Can be shifted steplessly
between 100 and 1260 mm. Attachment details in the
dimensions M2,6, M3, M4, M5 and M6 for projector
attachment are included.
Classic wall and ceiling bracket with dual profiles. Can
be as long as 5000mm. Enter the required length when
ordering.
A simple universal stand for projectors weighing
up to 25 kg. Adjustable between 1000 - 1800 mm.
Attachment details in dimensions M3 and M4 for
projector attachment are included. Color: White.
Superlight is an universal ceiling mount suitable for
smaller projectors and home theatre installations
where the projector is to come as close to the ceiling
as possible. Features a quick-click mount and our
patented fine tuning. Alternatively, it is supplemented
with an extension kit that is 500 mm long and can
be cut to the desired length. Attachment details in
dimensions M3 and M4 for projector attachment are
included. Superlight can also be fitted in false ceilings
with the E 50410 ceiling bracket.
Classic
X-Line bracket
A 37761
Basic
A 37750
AA 37745
Superlight
Extension kit
Ceiling bracket
158
AA 37756
AA 37757
E 50410
Ceiling and wall brackets for projectors and screens
Ceiling and wall brackets for projectors - continued.
Cable cover
Cover plate
Table stand
The aluminium cover is used to easily and securely
hide cables between projector and ceiling. The cover is
cut to the desired length and snapped together when
the other installation is complete. Suitable for Classic
and Superlight with extension kit.
Paper cover is used to hide the hole around the ceiling
mount and cable cover.
Mobile cradle to quickly and easily place your data /
video projector on the board and steplessly turn the
projector so that everyone can see the image.
500mm
1000mm
Cover plate
A 37764
Table stand
A 37753
A 37751
159
A 17450
Ceiling and wall brackets for projectors and screens
Ceiling and wall brackets for screens
AX
S O L UT

M P E ND
T ED
A UD
IC O
IO N
PATEN
Classic
Same basic design as our patented projector stand,
but with more powerful details to handle up to 100
”TV screens. Stepless length to maximum 1500mm.
Can be adapted to different types of installations and
combined in various ways, such as double brackets
where heavier screens will come far into the room.
Classic
Brackets for TV screens
Customer unique mounts
The picture shows a stand for dual-projector
auditorium and screen built with X-Line player, see AV
wall section.
Special is standard for us - we design and
manufacture what is required for the function to be
obtained. Large, small, wall, floor, mobile does not
matter. We have the solution.
160
AA 37500
Ceiling and wall brackets for projectors and screens
Ceiling and wall brackets for screens - continued.
Basic - Tilt/Swing
Basic - Tilt
Basic - Straight
Basic
This mount is intended for TV sets 32-60 ”and is
equipped with both tilt and turn function. Tilt: -2 - + 10
degrees. Pivotable: +/- 90 degrees. Vesa: 400x400
maximum. Distance from wall: 48-498 mm.
Equal Basic-Straight but also equipped with tilt function
- 5 to +15 degrees. TV set: 42 - 65 ”. VESA: 800x500
max. Distance from wall: 63 mm.
Attached directly to the wall to make the screen as
close to the wall as possible. TV set: 42 - 65 ”. VESA:
800x500 max. Distance from wall: 30mm.
Basic - Tilt
Basic - Straight
This mounting bracket makes the screen come directly
against wall with no unnecessary gaps. If the screen
has connectors on the back, 25 mm distances are
included. A simple suspension bracket consisting of
two device brackets and one wall strip. The device
brackets can also be hung on an existing AV-rail.
Simple assembly with VESA standard hole pattern.
Suitable for screens up to 85 ”. Size: Wall rail 650mm.
Hanging bracket 480mm with 9 holes according to
VESA standard.
Basic - Tilt/Swing
A 37767
A 37766
A 37765
Basic
161
A 37770
Ceiling and wall brackets for projectors and screens
DesignLine Connecto Center
AX
S O L UT

M P E ND
T ED
A UD
IC O
IO N
1 Unhooking protection
2 VESA-standard
PATEN
3 Electricity Distribution
4 Computer / HUB bracket.
Modern installation
With the DesignLine Connecto Center, we’ve
created the most complete screen mount
ever.
All technical accessories fit in just near the
screen, guaranteeing short and high quality
signal transmissions. Available for service
while at the same time neat and tidy.
The smart suspension with AV-rail makes mounting
fast and easy. The rail is easy to place correctly. Just
put the spirit level on it and mark where the holes
should be made in the wall. The double unhooking
protectors 1 makes the DesignLine Connecto Center
sit securely and stable on all walls.
handy proof that we at AudicomPendax are fond of
practical solutions. If you want, you can get it with
power-saving features that automatically turn off all
connected accessories when the computer, or hub, is
not in use.
The Camera shelf 5 is also mounted on the AV rail. It
is suspended with the DesignLine Super Wheel, which
also has built-in unhooking protection. The shelf
can be set to different heights to accommodate for
different sizes of televisions.
To facilitate the installation of flat screens there is
an international 2 VESA standard that the bracket
is adapted to. This means that the monitor you
choose is guaranteed to fit, both for hole pattern and
dimensions of fasteners.
The integrated electricity distribution 3 is a
162
Ceiling and wall brackets for projectors and screens
5 Camera shelf
DesignLine Connecto Center
For LED screens 55 ”and above, and for users with
high demands.
Wall mount
Accessories:
Computer / HUB bracket
Energy Saving Outlet
Camera shelf
A 49790
A 49791
A 49792
A 49793
163